kbs tour c taper stiff

$ 49.95

LOW LAUNCH. LOW SPIN. SIGNATURE FEEL.

Kbs retrobuild.

The KBS Retrobuild allows you to customize every piece of your build from grip down to the label. Your clubs – Just better. Start Your Build >

KBS Find Your Fit

The KBS custom online fit tool allows every golfer to explore different shaft options based on their swing. Finding your fit just got easier. Get Started >

KBS Golf Experience

From custom builds to swing analysis to custom KBS gear – Our goal is for you to leave as a better player. Explore Now >

TAPER TIP TECHNICAL SPECIFICATIONS

Parallel tip technical specifications.

Get plugged in…

KBS C-Taper Iron Shaft Review

More in reviews:.

50 Words or Less

Phenomenal accuracy without boardy feel.  Low spin and a little stiff-to-flex, fitting is a must.

Introduction

Low spin shafts don’t have to feel like garbage.  That’s the main lesson to be learned from the KBS C-Taper.  While it delivers some of the lowest launch and lowest spin, it also delivers that trademark KBS feel that is loved by virtually everyone who tries it.

The primary feel characteristic of the KBS C-Taper is stability.  The tip, in particular, is extremely stout which gives you the feeling that you can put everything into the swing without fear of “losing” the shaft.

The impressive part is that you get this stability without a lousy, boardy feel.  There is still a clear feeling of loading and unloading in the butt of the shaft when you make a strong move at the ball.  That last part is key: this shaft does feel a little stiff-to-flex, so make sure you get fit before putting the C-Tapers in your irons.

Generally there isn’t much to say about the look of an iron shaft, but the C-Taper is an exception.  It’s matte grey with an industrial look that is unlike anything else out there.  Additionally, the C-Taper is stepless which is a look that I love.

Performance

For me, there is not any iron shaft that is as low spin and accurate as the KBS C-Taper.  From the pitching wedge through the long irons, I always feel in control of the club and never get a surprising result.  The ball flight does tend to be a little lower, and the flight is very penetrating.

The major caveat is that the low spin characteristics can be too much of a good thing.  I have played the C-Taper shafts in two different sets of iron heads, one successfully, one not.  As a low spin player, putting these shafts into “players irons” was a recipe for low bullets that would not hold a green.  Perhaps a softer flex would have worked with those heads, but a stiff flex did not.  In a higher-launching game improvement iron, these shafts have proven to be brilliant: they are tremendously accurate and the low spin makes them long and consistent.

Ultimately, the C-Taper is great at what it does, it just demands a good fit to deliver optimal performance.

If you’re a long time Dynamic Gold or Project X player, you probably don’t think there’s any reason to change, and you might be right, but it would be worth your time to check out the KBS C-Taper.  It offers extremely low spin, great accuracy, and all without sacrificing feel.

Price and Specs

The KBS C-Taper is available in Regular (110 grams), R+ (115 grams), Stiff (120 grams), S+ (125 grams), and X-Stiff (130 grams).

The KBS C-Taper retails for about $37 per shaft.

Recent Posts

• New Level SPN Wedge Review - May 9, 2024
• TaylorMade Qi10 Max Fairway Wood Review - May 8, 2024
• Wiley X Sunglasses Review - May 7, 2024

24 Comments

Hi, Matt one more question for you. I am a high spin player playing PX flighted shafts. How would the C Taper compare and differ? Thanks

I think the C-Taper is infinitely better feeling the the PX, but feel is obviously very personal. The C-Taper is also one of, if not the, lowest spinning iron shaft available.

Sweet. Cant wait to try them out. Im looking to get into a set of MP 64’s and was wondering if I should swap from PX to C taper. Looking forward to the swap. Thanks again for your time.

Hi! Can you possible tell me if it is possible to Put KBS C -Taper stiff flex shafts into a set of Mizuno mp32 irons

Yes, you can.

can i put kbs c taper 120g into mizuno jpx 850? ball flight on 4 and 5 irons seems almost too low at times

Sure, no reason you can’t.

Do they make a C taper shaft for Drivers? If so, would you recommend it.

No, they don’t make one in driver length.

Enjoy very much your golf equipment and swing commentary

If I’m switching from dmx100’s to the kbs c tapers xstiff, should I soft step them? I’m looking for something to play around 6.5 with low trajectory and low spin

Only a fitter who has seen you swing both could answer that question.

Hey Matt I was just wondering if flex wise they are similar. I’ve always been told that c tapers play stiffer but when I talked to kbs and gave them my swing speed with my 7 iron(95-98) they said to try the x straight up first then soft step it if I don’t like it. Id like to try to get it right on the first shot. I’m taking out true temper amt tour issues in xstiff. I can’t get used to the ascending weight in them

I would trust KBS’s recommendation.

Can we put these shafts if ping 700 irons?

I just got a set of Mizuno MP-20 MMC with the C-Taper 125 (S+). I am spinning it quite a bit with a great deal more launch than I did with my previous irons (MP-59 with DG R-300). Just something unique to each golfer that needs to be tinkered by a fitter?

You changed multiple pieces of the equation, so it’s hard to say what the shaft is responsible for. Were you fitted for the new irons?

Can KBS tour lite x115 fit in 718 Ap2?

Yes, as long as the tip diameter of the shaft matches the hosel.

.355 tips is what I have purchased

That should work.

Played CTaper 120s and loved the results but was just too boardy, switched to Tour 130x and love the feel but hit it wayyyy to high. Any recommendations? Tour V? S Taper?

Have you tried the C-Taper Lite?

Leave a Comment Cancel

Your email address will not be published. Required fields are marked *

Email Address

Save my name, email, and website in this browser for the next time I comment.

• Golf News – May 9, 2024
• New Level SPN Wedge Review
• TaylorMade Qi10 Max Fairway Wood Review
• Sunday Golf Big Rig Cart Bag Review
• Golf News – May 7, 2024

Contact Us Advertise Subscribe

Advertise on this site.

Plugged In Golf

Do You Like Free Golf Gear?

Sign up for our weekly newsletter and not only will you get the latest reviews, instruction, and more delivered directly to your inbox, you’ll also be entered into regular giveaways for golf clubs and more.

KBS Tour vs C Taper Shafts: Comparison

KBS Tour vs C Taper Shafts – which is better for your game? Well, they have a similar profile but there are some subtle differences that are important to note. Keep reading to learn what this are and how you can choose the right one out of the two. 

Without a good shaft, your golf club will be incomplete. This is why pro golfers are not just concerned about their game but also their tool, one of which is the shaft.

Though there are dozens of brands out there, the KBS series seems to be one of the best. They have been reviewed in several pro golfer publications and have been around for quite a while.

Two of their most popular shafts are the KBS C Taper and Tour. If you’re reading this, you probably got a recommendation to buy either of them.

While we can’t authoritatively say one is better than the other, they actually have some differences that can make you want to pick one over the other.

This short article exposes the differences so you can choose the right one. Let’s look at their profile and features and who should be using which:

KBS Tour vs C Taper Shafts: Which Is Better?

Before comparing the two, let’s first look at the profile, features, and performance of each shaft.

The performance will be based on how we translate the features into benefits and the experience of those who have used them. Your experience with the shaft may vary but should be close.

So let’s begin with the C Taper:

KBS C-Taper Shafts

The KBS C-Taper iron shafts are among the least striking and twirling steel shafts in golf.

The KBS C-Taper shaft, coupled with a characteristic KBS design, increases power transmission for a crunchy grip whilst also maximizing shaft lengths in the taper and tip zones for minimal arc and rotation stabilization.

The C-Taper is the ultimate iron shaft for those who want to take low-cutting shots with great stroke control.

When your irons have the proper flex, the C-Taper is one of the most sensitive and precise iron shafts when striking.

In terms of distance, the KBS C-Taper is comparative to the player and provides a 5 percent longer range.

Specifications

The KBS C-Taper steel shaft comes with five loads and flexibility options.

Mass ranges from 110gm and 130gm, with flexibility increasing with mass. There is a normal, systematic, rigid, rigid plus, and additionally rigid variants, each with its unique load structure.

Each load and flexibility spectrum is designed to generate a deep ball trajectory with little rotation and greater management.

KBS Tour Shaft

The KBS Tour shaft was created for golfers of different skill levels.

The Tour shaft is a semi-course steel and tapered shaft that provides a characteristic soft touch to the golfer.

The KBS Tour increases dynamism transition to provide greater uplift and better release with wrought iron and tapered blocks.

Non-professional gamers will like the KBS Tour’s reactive grip. Why? Because it’s built to serve the right components to key in their games

The handling of this top-notch golf rod is equally acknowledged by many of the globe’s greatest golfers.

Significant Features A 5 percent reduced arc, reduced twist, and increased length provide golfers with a convenient steel shaft that complements their swaying.

The comfortable and reactive KBS distinctive touch gives golfers additional alternatives at reduced wagging velocities.

The KBS Tour is suitable for golf enthusiasts of practically every price choice because of the variety of leverage and flexible alternatives.

The KBS Tour steel shaft is available in six distinct variants. The KBS Tour is provided in 110gm standard, 115gm regular plus, 120gm rigid, 125gm rigid plus, and 130gm extra-rigid weights and flexes.

Every shaft is accessible in ranges from 1 iron to lob wedge and may be individually tailored to players of any physique.

KBS Tour or KBS C Taper Shafts?

The KBS Tour shaft is an excellent choice for golfers who don’t sway the golf club aggressively.

The KBS Tour shaft is ideal for modest median and higher handicapped golfers who seek greater responsiveness and a better grip on their clubs.

On the other hand, the KBS- C Taper Shaft is ideal for golfers who want to smash modest penetrating hits with amazing aims and accuracy, as well as a more ultrahigh sway that allows you to strike the target more precisely and traverse more range.

Related Posts:

• Bridgestone B330 RX vs E6: Which Is Better?
• Bridgestone B330 RX vs Srixon Z Star: Which Is Better?
• Ping Anser 3 vs Anser 2 Putters: A Comparison

Want to Get Better at Golf?

Get "ben hogan's five lessons" and join thousands of others improving their golf skills..

Learn the Fundamentals: Stance and Posture > Golf Grip > The Swing.

This book has LOADS of positive reviews. THOUSANDS OF REVIEWS. A MILLION COPY SOLD. CHEAP!

Leave a Reply Cancel reply

Your email address will not be published. Required fields are marked *

Save my name, email, and website in this browser for the next time I comment.

KBS C-Taper Lite Shaft Review

Kbs c-taper lite shaft.

KBS made some significant waves in the steel shaft market when they first introduced the original C-Taper .  The C-Taper was noted for its low spin and trajectory as well as its stout feel.  Together, those characteristics made it an unbelievably accurate shaft, but it was a LOT of shaft!  Hearing the pleas for similar characteristics in a more user-friendly shaft, KBS introduced the C-Taper Lite.  The KBS C-Taper Lite has original C-Taper characteristics but with a softer butt section and a lighter overall weight.  This design allowed KBS to make it easier to get the ball in the air while still controlling spin for pinpoint accuracy.  Let’s see how well they did…

Like the C-Taper, the KBS C-Taper Lite has the same matte/brushed chrome finish that has more of an industrial vibe.  Another small difference is that the shaft label is white and red on the C-Taper Lite as opposed to the black and red of the C-Taper.

How Does it Feel?

A lot of the same feel characteristics from the original C-Taper such as a firm, controlled feel with a stiff tip section are still present in the C-Taper Lite.  The biggest difference is you can feel the gradual flex profile and energy transfer at impact a lot more.  Through the lighter weight and softer butt section, KBS certainly made the C-Taper Lite much easier on the hands .  The shot feedback is just as great in the C-Taper Lite as well.

If you were a player where the C-Taper felt like it was a bit too much shaft to tame but it had something going for it, the C-Taper Lite is your answer.  If you’re a player that is looking to get into a little firmer shaft without swinging a telephone pole, the C-Taper Lite could be good for you too.

On-Course Performance

So KBS bills the C-Taper Lite shaft as “mid-high launch with controlled spin.”  I think this is a fairly open description, but I can clear it up a bit with what I saw in testing.  Like its standard counterpart, the C-Taper Lite is more of a lower-spinning shaft.   Where I found the C-Taper Lite to differ was that I could easily add or reduce spin depending on the shot I was trying to hit.  In the case of the standard C-Taper, I found that more difficult to accomplish.  So KBS calling the spin “controlled” is a fair assessment I think.  You will be able to manage your spin as necessary.

Calling the C-Taper Lite “mid-high launch” is also a pretty fair assessment.  I found a rising (NOT ballooning) mid-trajectory shot to be the standard while elevation adjustments were easy to execute as necessary.  In regards to trajectory, the easier launch (relative to the standard C-Taper) was especially noticeable in the longer irons .  I was able to hit 4 thru 6 with a nice rising flight and a higher apex for a soft landing into greens.

Final Thoughts

Like the original C-Taper, the KBS C-Taper Lite is great for selecting a shot and attacking your target .  KBS gave the C-Taper Lite more player-friendly characteristics that allow for easier launch and more control for players that found the C-Taper to be a bit much to handle.  If your swing is a good fit for this shaft, you’ll find the C-Taper Lite to be very versatile and a lot of fun to hit!

Related Posts:

21 Comments

Hi Bill, I tried Callaway Apex irons with PXI 6.0 shaft and I liked them very much. The KBS C-Taper Lite is like a project x pxi shaft ? Thank you very much, Michele

I would say the C-Taper Lite is nothing like a PXi. I don’t think there’s anything the Project X family like C-Taper or C-Taper Lite.

I am a 6 hcp on the senior amateur. I do not have spin numbers but the ball flight is very hi, wedge through the 7 iron. Opposite of what I need.. in my opinion. Suggestions?

Just to clarify, you CURRENTLY hit the C-Taper Lite or are considering it?

Bill, Was just fit for the C Taper Lite 105 R. I have good speed (92 mph with 6 Iron) and play to a scratch hc but interestingly got fit for the 105g shaft. This is likely due to me switching from the XP 95. I would love to know your thoughts/concerns on this as I was skeptical at first. Very anxious to try out this setup.

How’d you hit the C-Taper Lite 105?

What would you say the difference is between the PXI 6.0’s and the C Taper Lite Stiff? Most sites have them as very similar. Thank you in advance.

Hmm, I don’t know if I’d say they’re similar, but that might be subjective. I’d say the PXi feels a little more fluid whereas the C-Taper Lite feels a little more firm. I, personally, also found the C-Taper Lite to launch and spin a bit lower than the PXi.

Considering the C-Taper Lite S @ 110g, coming from the KBS Tour R+ hs1x. My 7-iron Swing Speed is 73mph, but have a strong move to the ball, not quick though. I hit the C-Taper Lite S in a Mizuno JPX 921 Forged head. It felt firm, but the launch/height was good, and Dispersion Great. especially compared to the KBS Tour R+ in my gamers, Srixon Z765. Thinking about Soft-Stepping 1x?? Or maybe the TT Elevate Tour R @ 112g straight In. What are Your thoughts ??

Shafts you’re comparing are apples to oranges. But based on your thought process you already shared, the only real answer is to work with a fitter or just try the experiment. Couldn’t tell you what to expect from any combination you listed as your body and swing will respond in a way that’s unique to you. So basically, the only way you’ll really know is by actually hitting them.

Awesome. Thank you Bill. I have an index of 9 and have a driver speed of 102-105. How’s this compare to you? The reason I ask is because I don’t need anymore height on my shots so if you and I are similar I would lean towards the CT lite. Thanks again.

I don’t think comparing our driver speed and index gives you the answer you’re looking for here. (I’m ~115/7.3 right now if you think that’s helpful for you.)

It depends much more on your specific swing and how you swing the club. Or how your body physically responds to the equipment. In theory you could give a low launch player the highest launching shafts and they still might not hit it high.

Hi Bill- I’m curious about how you would compare the C Taper Lites to the KBS Tour Vs in regards to launch/spin. I’m currently playing the Tour Vs and am thinking about switching to the C Taper Lites. I think that I could use a little higher launch, but don’t want to go overboard. Your thoughts and input would be greatly appreciated

The difference between the two is going to vary from player to player, but in theory, I’d imagine the C-Taper Lite to launch higher than the Tour V.

Are you able to share a comparison between Dynamic Gold 105 and the C-Taper Lite? I was fitted for the DG105 (with Srixon ZX5 irons) but now the DG105 are out of stock; fitter suggested C-Taper Lite as a suitable replacement. Looking for additional perspectives.

Sorry, I don’t. My experience with the DG is minimal and the C-Taper Lite only a little more. My swing isn’t a great fit for either so I can really only comment from the review perspective on the C-Taper Lite, but nothing on the DG 105. Good luck!

The difference between the KBS tourV and the KBS C taper light is the tour V will launch a lot lower with less spin and roll out more. The C taper lite is mid to high launch and stops better on the greens for me. I played the tourV for the last 5 yrs and just got fitted for the C taper lite on my new Srixon irons and love them. Both are good shafts but the Srixon fitter liked my flight with the C taper lites as he said I needed more height and the fitting numbers were good.

I am 70 yrs old and took a chance on being able to hit these C taper in regular. I have always hit the ball very high. These shafts brought the flight down just enough but still plenty high. Don’t be afraid of these shafts. They ARE super accurate and no loss in distance. They have really great feel. Six iron is around 170 yds.

The taper shafts are the same in set? Exemple: 4i shaft is same like 9i but only longer butt section? (No tip trim, no diferent weight in raw size, or enything else?)

You don’t need to tip trim, no. With taper tip, each iron tends to have its own specific length that you’ll butt trim to size. You wouldn’t buy seven of the same shaft and just butt trim them to length.

Leave a Comment Cancel

Your email address will not be published. Required fields are marked *

Email Address *

Save my name, email, and website in this browser for the next time I comment.

Which KBS iron shaft is best for you?

Published: 22 September 2022 Last updated: 17 January 2024

KBS iron shafts are for everyone from the world’s best golfers to slow-swinging amateurs, but which of their 14 models best suits you? Let us explain…

Golfers rarely give a second thought to which shafts are in a new set of irons . Yet, KBS believe 14 different models (all of which come in numerous weights and flexes) are needed to cover all types of players.

Technology has taught the brains behind KBS – Kim Braly, if he’s to fit hard-hitting tour pros alongside moderate speed, high handicap amateurs the brand needs a vast array of options. The thinking has led to the creation of 14 different steel and graphite KBS iron models.

EXPLAINED: How we test golf equipment

We don’t want to fit you for your perfect iron shaft. That should only ever be done with the help of a decent club fitter in the real world. But, to highlight how shaft technology helps you hit better iron shots more often we’ve taken a look at the full KBS line-up.

When buying your next set remember KBS shafts can change how a shaft feels, launches and spins, so you have the opportunity to choose your perfect ball flight and set-up. Here’s what you need to know about KBS iron shafts.

Players’ models  

Kbs c-taper iron shaft.

There are three-pillar players’ shafts within the KBS line-up and each differs by balance point. The Tour is stiffest in the grip section (for good feel) and it gives mid-launch and mid-spin. The C-Taper is stiffest in the tip section (close to the head) to give a stout and strong feel and deliver low launch with low spin. The S-Taper fits neatly between the pair.

C stands for Constant Taper, so the shaft has no steps, which allows the C-Taper to have a strong and stout feel. Typically the model suits stronger golfers, and players can expect a 5% lower ball flight than True Temper’s Dynamic Gold . Major winners Gary Woodland and Justin Rose have played the C-Taper as has Rickie Fowler .

KBS $-Taper iron shaft

All three KBS pillar players’ iron shafts come in the same five weights, so golfers get to choose based on the launch, spin, and ball flight desired for their own game.

Half flexes (R+ and S+) are brilliant for golfers that sit on the fence between two flexes. They alleviate decisions around whether to go regular flex for more distance or stiff for increased accuracy. The S-Taper (Subtle Taper) is midway between the C-Taper (lowest spin and launch) and Tour shaft (mid-spin and launch).

KBS Tour iron shaft

The Tour is Kim Braly’s signature shaft, it was the first KBS model and it’s the mothership of KBS. Thanks to not being overly strong the Tour can suit a wide audience of golfers. Its consistent step pattern is a good fit for smoother, less aggressive transition players.

Thanks to being a high balance point model (so weight is positioned closer to the grip), golfers get a slightly softer feel and good feedback at the top of the swing. A further Tour FLT (Flighted) shaft model launches long irons higher and short irons lower for a more optimised set.

RELATED: Which Taylo rMade iron suits me ?

How KBS players’ steel shafts differ in launch and spin

KBS Tour V iron shaft

KBS see the Tour V as an outlier shaft because the model is 10g lighter than the C-Taper, $-Taper, and Tour.

KBS Tour Rep Paul Steels says “the Tour V shaft is often a good fit for players who like the shot shape and flight of the C-Taper but want extra feel, as the C-Taper is just so boardy”.

KBS C-Taper Lite, $-Taper Lite, and Tour Lite iron shafts

There’s lots of misunderstanding around lighter iron shafts. But KBS say golfers should see their Lite models (which are 15g lighter than the standard models) as giving a little more launch and being easier to get airborne (than the 3 pillar models).

For players who don’t go at iron shots full tilt Lite models can be a really good option as club speeds increase and shots launch higher. Lite models and aging typically go hand-in-hand. If you happen to overload the shaft you’ll know because shots will start turning over left of the target (for a right-handed golfer).

Also, think about launch windows. A strong but very low launch player could see benefits by going Lite but in a strong flex to up launch and ball flight.  

RELATED: Should you play the KBS TD driver shaft?

KBS iron shaft swing speed recommendations

Average speed KBS iron shaft models

Kbs max and max ct80 iron shafts.

To ensure KBS have shafts to suit every golfer’s speed they produce ultralight Max and Max CT80 shafts as well. Both Max shafts are high-launch, high-spin models which help optimise ball flight for maximum carry distance at moderate speeds.

Remember it’s possible to be a fast but inconsistent high handicapper (in which case you’d be better suited to one of the KBS players’ shaft models), so think about shafts suiting speeds rather than ability. Thanks to their low kick point and high launch properties the Max shafts regularly make an appearance in stronger lofted irons (think TaylorMade Stealth and Callaway Big Bertha B21 ).

Typically high-speed players, irrespective of ability will not touch this product.

RELATED: Which Lamkin grip best suits your game?

There are junior options too   

To ensure golfers can go through their whole golfing career with a familiar KBS feel, the brand also produce two junior steel shafts (the 560 and 580). Both are designed to suit the speed of 8 – 11-year-old players.

Both shafts are lightened steel, so the weights are similar to lightweight graphite iron ranges. But, crucially golfers don’t get a heavy head feel which can cause issues when switching from graphite to steel once a child is a stronger teenager.   

When should you go graphite?

Graphite irons shafts are massively misunderstood in the modern game. Many people think they’re for older golfers and slower speed players, which just isn’t the case. Graphite irons shafts are easier on the body. They remove vibration, and can suit everyone from tour players to very moderate speed club golfers.

In typical KBS fashion, the brand make three graphite models (all are available in numerous weights and flexes), here’s what you need to know about them.

How KBS graphite iron shafts differ in launch and spin

KBS TGI – Tour Graphite Iron shaft

KBS specifically target a steel-like feel from their graphite shafts. They’ve done such a good job fulfilling their brief several tour players swear it’s not actually graphite. Thinking instead it’s a steel shaft painted black.

The TGI can be matched to golfers’ speeds (there are eight weights, so the model can suit from 57mph to 100mph speed players) in exactly the same way as the brand’s steel shafts. The TGI is the company’s lowest launching and spinning graphite iron shaft, it’s pretty strong and stout, so decent players often like it.

KBS PGI – Players Graphite Iron shaft

In developing their shafts KBS have undertaken masses of research, and they say when the flex isn’t disclosed golfers often prefer the feel of graphite over steel. Their advice is to play the flex you need. Don’t be tempted to go stiffer than necessary. And if you swing a 6-iron at 70mph play a shaft that performs at that speed.

The PGI was developed to bring a steel-like feel to graphite and it’s a step up from the lower launching and spinning TGI. The PGI is widely played on the LPGA Tour, it’s the brand’s mid-launch/mid-spin graphite iron shaft. Six weights mean the model can suit from 57mph to 94mph players.

KBS Max graphite iron shaft   

The Max graphite is the highest launching and spinning graphite iron shaft in the KBS line-up. It’s a model for golfers who really need help launching shots high into the air to maximise carry distance. Five weights mean the model can suit swing speeds from 51 to 82mph.

KBS graphite iron shaft swing speed recommendations

Get it right the first time

KBS reckon so long as golfers get fitted correctly the first time they can progress through KBS models throughout their playing career. It means, if like Gary Woodland you’re a C-Taper player or Cameron Smith a Tour shaft player you stay within that family but progress to lighter models as you age.

And to demonstrate how important finding the right family is KBS say to look at Adam Scott and Gary Woodland . Scott has been a Tour shaft player for years (think of his smooth, under-control swing) whereas Woodland is a big strong hitter of the ball, so he’s a C-Taper guy all day long. But, switch their clubs over and both would struggle to play, as they wouldn’t get the ball flight or shot window they’d be expecting.    

Don’t forget your wedges

Today KBS are a through-the-bag shaft company. They make shafts for drivers, fairways, hybrids, irons, wedges, and putters, so if you’re taking the time to get fitted don’t neglect how the company produce five different wedges shafts too.

KBS say the Hi-Rev wedge shaft has been designed from the Tour shaft profile. There’s a lengthened tip section to give a softer feel and generate extra spin. If you play the Tour shaft you’ll likely enjoy this wedge model too. The brand’s 610 wedge shaft was designed to complement the Tour V shaft.

Where C-Taper and S-Taper fans often run shafts from their irons through into the wedges, albeit at a slightly lighter weight as wedge shots are rarely hit full out.

Want more information about KBS iron shafts? Visit their website here   

How do KBS iron shafts compare in data?

Verdict: KBS iron shafts

Lots of people will look at our test pro’s data and think the shafts are performing very much alike. But the data says nothing about how different the shafts felt.

Comparing the C-Taper and S-Taper the data shows the pair as being pretty evenly matched but the difference in feel was phenomenal. So different in fact our test pro felt he just wouldn’t be able to use the C-Taper effectively on the golf course (as it’s so strong). Where the $-Taper felt brilliant and could well be his perfect match within the KBS family.

The Lite shafts produced a faster ball speed, just as KBS promised and the C-Taper Lite in particular launched and flighted shots higher with a steeper descent angle, so there’s a huge amount of tuning in ball flight and feel available from shafts.

Just as KBS promised the TGI graphite shaft produced some very good optimal numbers too, they’d be a very sensible choice for golfers looking to avoid the shock and vibration of using steel shafts. Equally the Max graphite climbed to its peak height very early in its flight, which at lower speeds will be a real benefit in maximising carry distance.   

At the end of the day, KBS are all about the consumer. You get what you want, whether that be higher or lower launching, more or less spin, or a different feel, everything is on offer within the KBS iron family. Our test pro liked the $-Taper for his own game as it didn’t feel too strong, yet it felt stable and produced a good feel through the hands, and he had control over his ball flight.

KBS Founder Kim Braly on a life spend designing golf shafts

Many golfers won’t know the name Kim Braly, but the guy is a shaft legend. He has dedicated his life to creating the highest performance shafts you can buy, and we sat down with him. 

How have shafts evolved over the last 150 years?

A hundred of those years were dominated by hickory shafts. Steel shafts didn’t come about until the 1930s. My father patented “Frequency Matching” (in the 1980s) which has been the biggest breakthrough during my lifetime. Until then there were no standards; the method gave a baseline to compare and match shafts. Everything I’ve achieved since is down to the Frequency Matching method he invented.

How did the Frequency Matching idea come about?

We made titanium irons with tungsten weights and wanted to see how different set-ups affected performance. We organised a golf robot, and tried two identical set ups, yet the results were entirely different. We started questioning if shafts might not be matched. My dad developed Frequency Matching as a way to compare and match (for flex, weight, profile through CPM, cycles per minute) shafts to one another. The process hasn’t changed for 30 years.

You developed the Rifle and Project X shafts which are still popular; what was different about them?

No set of shafts had been designed individually for each club until then. They were a breakthrough. We’d follow the PGA Tour (at a time when there were no tour vans) and explain to players about matching their irons. We could match a whole set to the club they felt most comfortable and confident with. We were custom fitting without really knowing it.

I’m also proud of what we’ve achieved at KBS over the last 10-12 years. If we aren’t the leaders in shaft technology I really don’t know who is.

What was the players’ reaction?

They were super interested. We had lines of people wanting to understand how shafts affected performance. We learned all sorts. In relation to frequency the lightest shaft in the bag (the driver) will be the stiffest. The weakest shaft should be in the lob wedge, as there’s lots of shots hit less than full out, and a fraction weaker shaft allows you to know where the head is.

Today, the correct fit for players is often a flex and a half stiffer than we recommended 15 years ago. At the start we were a couple of guys just trying to understand. It wasn’t about marketing; we had our mathematical theory and we wanted to understand if it worked in practice.

How have launch monitors affected modern shaft fittings?

They’re one of the best things to have happened to golf. Launch monitors have helped people understand ball flight, spin, height and launch. Every shaft I’ve ever designed has been designed with a type of player in mind.

Each KBS shaft fits into a matrix, we’ve worked on them one at a time, and the line-up is nearly 100% complete.

Where do you start designing new shafts? Is it an idea from you, or a request from a player?

We have ideas, but they have to work in practice. In golf “feel” is a huge thing. If the feel is wrong products go nowhere. I’ve enjoyed dialling in the KBS Tour Lite (steel) and KBS PGI (Players’ Graphite Iron shaft) to be “everyman” golf shafts over the last two years.

They work at specific swing speed ranges, and thanks to our options we can optimise launch and spin for golfers swinging 6-iron in the region of 80mph.

You’ve worked on a bunch of top performing shafts, but which are you most proud of?

The Precision Rifle put me on the map, set up my career and I learned loads from it. The first KBS Tour shaft was a really big deal, too. It’s the foundation stone of every other KBS shaft, where all our other current shafts start. I’m awfully proud of it. 

Have you hit hickory shafts? How different are they to today’s models?

The last two tournaments I’ve played have been hickory challenges. Hickory weighs a ton (they’re 180g in a 6-iron), they’re really stiff but the torque is unreal. You can literally twist the head in your hand. Wood is strong in one direction – the one it’s grown in – which is up and down the shaft.

Will graphite shafts ever be the norm through the bag?

I’ve heard so many times how graphite represents the future. In terms of iron shafts steel is still a great material. The reason graphite became popular is its strength to weight ratio. It’s possible to make a 45in driver shaft at a “normal” swingweight.

You just can’t do that with steel, but you don’t need that as much in irons. Steel isn’t going away.    

KBS make 16 different iron shafts; why so many?   

Each of our profiles do different things. You may have the tendency to hit the ball low, so we have shafts designed to spin more and have a higher trajectory, and vice-versa.

For every 2.5mph of club speed change golfers need a different shaft flex, and that’s why we make half flexes. There’s also feel to consider. In our KBS Tour franchise we go from 130g to 90g in 5g increments (nine different weights), so golfers get what they need.

Whereas in a traditional three flex line-up (R, S, X) golfers get pushed into the best option available. KBS have a reputation for making good feeling shafts because golfers get shafts with the correct load at impact, which naturally feels good. Everything really does come back to fitting.

READ NEXT: Best 2022 Iron Test

BECOME A TODAY’S GOLFER MEMBER:  Unlimited access to premium content and exclusive rewards!

C-Taper Steel Shaft

• STIFF TIP SECTION
• ADVANCED CONSTANT TAPER
• HIGHER CG LOCATION
• FIRM SHAFT DESIGN
• INTEGRATED WEIGHT AND FLEX
• 5-FLEX SYSTEM

Studio fitting

Schedule a private session with a certified Fitting Specialist to find the right gear that takes your game to the next level.

• Select product options

Free shipping

Free shipping on all orders over $99

Free in-store pickup

Buy online and pick up at your local store

Buy now. Pay later.

Split your online purchase into 4 interest-free payments with Zip

KBS Tour C-Taper .355 Steel Iron Shafts

Shaft services optional, description.

Inspired from Tour player feedback, designed to complement the KBS Tour shaft's exceptional shot control with performance targeting players with a fast swing tempo.

• Designed to impart lower launch and less ball spin.
• Enhanced for Custom Tuning

trimming instructions

KBS C-TAPER Shaft

Related products.

KBS C-Taper Lite .355 Steel Iron Shafts

KBS C-Taper Lite .370" Iron Shafts

KBS $-Taper Chrome .355" Iron Shafts

KBS $-Taper Lite Chrome .355" Iron Shafts

This product can expose you to chemicals including black (airborne, unbound particles of respirable size), which is know to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov .

Shaft Services

Important Note: Please provide Current contact information. Customer service may require further information before proceeding with your order.

PUREing - $25.00

SST PURE identifies asymmetries that exist in every golf shaft and locates each shaft's most stable orientation. This results in more consistent performance and uniform feel from club to club.

Tip Prepping - $2.95

Shafts are tip trimmed (if required) to manufacturer’s recommendations. For steel shafts, we abrade the tips. For graphite shafts, we remove the polyurethane coating. When you receive your shaft, all you need to do is mix epoxy, install and align. After the epoxy is cured, cut to your final playing length from the butt end and install the grip.

Tip & Butt Trimming - $4.95

Shafts are tip trimmed (if required) to manufacturer’s recommendations. For steel shafts, we abrade the tips. For graphite shafts, we remove the polyurethane coating. After tip trimming and prepping, the shafts are butt trimmed to the desired final playing length*.

Club Playing Length

Our playing length chart is available here .

* The exact model, club head number, and desired final playing length is required for butt trimming to be possible.

* The club number and or loft is require for tip prepping on most parallel (.335" and .370") golf shafts.

KBS C Taper vs. KBS Tour: Which Golf Shaft to Choose?

Are you looking for the best golf shaft but confused about finding one? Well, KBS C Taper and KBS Tour are the two most popular shafts worldwide. They are widely known for their build quality and style.  But, between them, which one will be perfect for you? 

Both gold shafts come up with different looks, performances, and technology. KBS C Taper has a very comfortable feel, whereas Tour is average. For achieving longer distances, the Tour is effective. But you can hit through the entire set by Taper. 

In this article, we will clarify all the debates about KBS C taper and tour, and you will have a clear idea regarding KBS c taper vs tour. 

Overview Of KBS C Taper Golf Shaft

The C-Taper shaft has superior, cutting-edge technology, but it offers even more solidity and command of the ball.

Actually, the C-Taper has a more subdued launch and spin and a more brisk, direct feel. It is ideal for players who want to improve their wedge and iron play. 

C-Taper shafts provide quicker players with less spin, greater distance, and lower trajectories.

Not every golfer or swing style can benefit from the KBS C-Taper golf shaft. If you want better control at high swing speeds, the C-Taper is for you. 

Read Also: KBS $-Taper vs Project X LZ | Which One To Choose?

Overview Of KBS Tour Golf Shaft

The KBS tour shaft accommodates golfers of varying skill levels. Mid-flight iron and wedge players will appreciate the distinctive smoothness of the KBS tour steel shaft.

It is designed to enhance energy transfer, making it more straightforward and more effective to hit long irons and short wedges. 

This tour shaft is a high-end golf shaft relied on by some of the finest golfers in the world due to its responsive feel and precision.

It is an excellent shaft for most golfers to try out because of its softer feel, more responsive loading, and professional control and accuracy.

Read Also: Tour Flex Vs Stiff Flex: Which Flex To Choose?

KBS C Taper vs Tour: Comparison Table

KBS C taper and KBS tour come in various designs and materials. In this section, we will show you a comparison table to understand the difference correctly. 

What Are The Differences Between KBS C Taper and Tour Golf Shaft?

There are some significant differences between KBS C Taper and KBS Tour. After reading this section, we will be able to distinguish them. 

With a very stiff tip portion but a relatively soft overall feel, the C-Taper is one of the most stable shafts available. Shafts with comparable properties typically sound and feel lifeless, unresponsive, and challenging to play. 

On the other hand, The KBS Tour Lite is much like the regular Tour in terms of feel. The general “dampening” reduces roughness on all mishits, making them feel pleasant in your hands.

Just like it was described, the KBS Tour Lite shaft has a very comfortable and light swing. 

Read Also: Ventus Red Vs Blue: Everything you need to know

Design and Look

KBS C-Taper looks and feels very different from your standard irons. This shaft is designed to get the best possible output by making it comfortable.

On the other hand, the KBS Tour shaft is customizable to your swing and ball flight preferences across six different flex and weight levels. 

There are no steps in the C Taper, and the labels are much more visible than in a standard KBS rectangle. Indeed, the look of the Tour is also attractive.

However, the fact you need to be careful is if you want greater distance and accuracy from your irons, you should try out the KBS Tour shaft.

Performance

To get green in C-Tapers, you need to hit the lowest flying bullets, and then you can shoot through the complete set.

It might be challenging to get wedges to settle and stay put. A noticeable improvement occurs upon switching to the lighter flex.

When you compare it with the regular KBS Tour setting, you can see that you’ll be able to carry the ball around a club further.

A lighter golf shaft often results in increased launch height and spin rate. You’ll have greater distance and a steeper slope angle, improving your ability to halt on the greens.

With the C-Taper, golfers can maintain a firmer grip even when their swing speeds are incredibly rapid.

But, the KBS Tour shafts excel in accommodating players of varying skill levels, from high to mid handicaps, who tend to more relaxed swing speeds.

Whose swing speeds aren’t quite up to the required level, but who want overall flexibility, the KBS Tour is a great option.

Again, players who are more physically dominant or swing quickly may find that the C-Taper shaft’s sharp feel encourages them to keep turning despite their shortcomings.

Read Also: S300 vs S400 Golf Shaft: Which One Should You Choose?

The KBS C Taper shaft, which takes its cues from the preferences of Tour pros, is made for those who need a low, penetrating trajectory and a high degree of shot control.

KBS Tour steel shafts have a distinctively smooth feel and are ideal for mid-trajectory irons and wedges. 

The KBS C-TAPER improves energy transfer for a responsive feel and reduces spin and trajectory precision for its taper and tip diameter optimization.

Offering a lower trajectory, less spin, and increased distance, the KBS Tour shaft is ideal for golfers looking for a club that is easy to hit with their swing.

KBS C Taper or Tour: Which Golf Shaft to choose?

It is difficult to say which shaft will be perfect for you from here!  By keeping your requirements in mind, you need to choose the perfect one.

The effectiveness of KBS C Taper with a soft and controlled swing. If you want a good control swing, go for the C Taper. 

When swinging more quickly and forcefully, which sometimes results in a loss of control, the shaft holds up well.

However, with KBS Tour, it’s crucial to make sure it’s a solid equipment mix for your specific swing if you want to improve distance through quicker swing speeds and a more fabulous launch.

Read Also: Tensei Blue Vs Orange: Which Golf Shaft To choose?

Frequently asked Questions (FAQs)

Some frequently asked questions may help you to find your query.

Does KBS C Taper give better performance than KBS Tour?

It will ultimately depend on your requirement. Please review our article, gather information, and choose the perfect one for you! The top golfers in the world choose KBS shafts because of their quick reactions and comfortable play.

Does KBS Tour feel better than C Taper?

Though the KBS tour has various options to get the best feel, the versatility of the C-Taper is one of its greatest strengths. It is critical to assess one’s fitness levels with the C-Taper initially. For those who want overall flexibility with their irons and wedges, the KBS Tour will be a perfect option for them. 

Which one covers a better distance between C Taper and Tour?

The C-TAPER shaft has been shown in third-party studies to increase average distance by 5 percent compared to the industry leader. With the KBS Tour, golfers will get a more significant lift and an easier launch with their irons and wedges because of the increased energy transmission efficiency.

Does KBS C Taper give good control?

Several of the best players in the world use the KBS C-TAPER shaft on Tour because it provides them with the most shot control and responsive feel. But, the KBS Tour is a premium golf shaft relied upon by some of the world’s greatest golfers because of its precision.

Is it true that a heavier shaft plays stiffer?

Yes, it is true! But, if the average model is too heavy for you, the 20% lighter Tour Lite may be the perfect compromise. To get the most out of their KBS shafts, many players discover they need to tweak their setup.

Meet Jalal, a passionate golf writer and the driving force behind Golfertroop.com, your go-to destination for all things golfing! Whether you’re a seasoned golfing veteran or a beginner taking your first swing, Jalal is here to assist you in making the most out of your golfing experience.

Similar Posts

Callaway Supersoft vs. Bridgestone E6: Comparing Golf Balls

When you emphasize the performance, the type of golf balls does matter. The golf balls that are considered top-range could be more challenging to differentiate….

Changing Shaft on Adjustable Driver – A to Z Explanation

The shaft of your golf driver has an essential influence on your capability to hit the golf ball and to ensure the utmost swing speed,…

Pros And Cons Of Stack and Tilt Golf Swing | Discussion

According to an old saying, the most important golf shot is the next one, pointing out how complicated and future-oriented the sport is as there…

Titleist TS2 vs. TSi2: Which Golf Driver Better Fits Your Needs?

Since TS2 and TSi2 have similar names and are from the same manufacturer, their differences can be hard to distinguish. And knowing its differences is…

Mizuno Irons MP20 vs. MP18: Which One is Right for You?

MP-20 and MP-18 are models of the Famous Japanese brand Mizuno’s MP series golf irons. While both models are designed for skilled players who value…

58 vs. 60 Degree Wedge: What’s Best for the Average User?

We all know about wedge clubs. They are the saviors in situations like sand or bunker. But there is a debate about the perfect degree…

Tech Talk: KBS C-Taper Lite iron shafts

With the name C-Taper Lite, most golfers will assume that the biggest difference between KBS’s newest shafts and the company’s original C-Taper shafts is the weight. But even though the new shafts are between 5 and 15 grams lighter depending on flex, weight was actually a secondary concern in the design of the shafts.

Kim Braly, the man who designs KBS shafts, says there’s no reason golfers should change to lighter iron shafts based on weight alone. While he admits that changing from heavier iron shafts to lighter ones usually gives golfers a few extra yards at first, over time Braly has noticed that golfers tend to go back to hitting their iron shots about the same distance.

“You see it all the time on tour,” Braly said. “Guys go to light-weight iron shafts and hit it a little farther. But then a few months later they go back to hitting it their old distances. Their bodies acclimate to the lighter weight.”

So if the C-Taper Lite shafts don’t give golfers extra distance, what do they do?

The new shafts fill a hole in the company’s lineup, which is between KBS’s low-launching, low-spining C-Taper and KBS Tour shafts and the company’s high-launching, high-spinning KBS Tour 90 shafts. They offer a similar feel and the same efficient energy transfer as the C-Taper shafts, but in a profile that is much easier for slower swing speed players to load properly. That gives them the best chance to hit long, straight shots.

To create the new shafts, Braly had to experiment with different shaft geometries, just like he did when he designed the tour-only shafts that Phil Mickelson is currently using, the KBS Tour V2.

Mickelson didn’t care for the feel of KBS’s original C-Taper shafts — he preferred the softer feel of the KBS Tour. But the KBS Tour shafts spun too much and launched too high for him. So Braly spent almost two years working with Mickelson on the design of the KBS Tour V2, which are actually lighter than KBS Tour shafts, but are lower launching and lower spinning.

Can you tell which shaft is a KBS Tour V1 and which shaft is a KBS Tour V2? A KBS Tour V2 shaft (left), has a larger outside diameter and thinner walls in the tip section, which gives it a more penetrating trajectory. 

It seems impossible that Braly could make a shaft that was both lighter and had a more penetrating trajectory, but it’s actually fairly simple to do. Because changing a shaft’s outside diameter (the fatness of the shaft) has three times more effect on stiffness than changing a shaft’s wall thickness, Braly was able to increase the outside diameter of the V2’s tip section to make it stiffer and get the lower-launching, lower-spinning performance Mickelson wanted.

Notice how the KBS Tour V2 shafts, when paired side-by-side with the KBS Tour V1 shafts, have longer steps (in both pairings, the V1 is on the left and the V2 is on the right). This change, combined with the change in wall thickness and outside diameter, gave Mickelson the launch, spin and feel he was looking for in his iron and wedge shafts. 

For a change that simple, why did it take two years for Mickelson to make a change? According to Braly, getting the right performance from a shaft is often much easier than getting the right feel. That’s why the V2 shafts are five grams lighter than the KBS Tour shafts. To make up for the stiffer tip, Braly was forced to extend the lengths of the steps of the shafts and subtract from the thickness of the walls to give Mickelson a KBS Tour-like feel with the performance that he wanted.

Like the tour-only KBS Tour V2 shafts, the C-Taper Lite shafts were able to be made lighter by decreasing the thickness of the shaft’s walls and tuning the shaft’s diameter to create the mid-spin, mid-launch conditions he was looking for from the shaft.

Just how important does Braly think the C-Taper Lite is to his company’s shaft lineup?

“I’m really into custom fitting and I wanted to have a complete product line,” Braly said. “I want to be able to fit golfers into the best product I possibly can. With this new product, I can’t imagine that there are many golfers out there that we won’t be able to fit.”

The C-Taper Lite shafts have KBS’s brushed satin finish, and are available for order now with shipping starting July 8. The R-Flex C-Taper Lite shafts weigh 105 grams, with the S-Flex weighing 110 grams and the X-flex weighing 115 grams. They’ll cost around $39 per shaft.

Odyssey Limited Edition U.S Open Versa #7

Grab that net and catch that beautiful butterfly, pal!

14 Comments

Pingback: KBS Adds New C-Taper Lite Shaft with Parallel Tip | Golf Gear Select

Dolph Lundgrenade

Jun 14, 2013 at 8:40 pm

With counterbalancing about to be a major aspect of the fitting process (owing to the recent exposure that many players are using it…and Jack used it) I expect a shaft line-up to be double the options. For KBS’s line-up I believe we will see a B-spec version of each shaft in a lighter configuration with the same profile. For example, don’t be surprised to see a C-taper that is exactly the same in terms of performance, but 10-20 grams lighter per flex… or, as another example, being able to buy a KBS Tour X stiff shaft that weights 115g. In this manner the fitter can counterbalance 15 grams of weight without increasing the overall weight of the club.

That’s just what I see for the future… but I’m right so often you may just count on it.

Jun 11, 2013 at 12:41 pm

Wonderful intuitive article. I play the Tours but can’t wait to try the C-Taper Lite Stiff!

Jun 10, 2013 at 9:20 pm

Yea but my Honma 5 stars cost more and are graphite. I have gold in my irons too.

Honma driver 5 star 1700 dollars Honma 3 wood 5 star 1500 dollars Honma irons 3-AW 5 star 12,500 dollars Cameron California prototype, 1 in existence 25,000 dollars Honma Corinthian leather golf bag 5500 dollars Custom Club Car cart 22,000 dollars Golf swing .50 cents Okay guys I am being fecetious but I actually saw this on ebay

Jul 12, 2013 at 7:31 pm

Surely you mean FACETIOUS? Since Fecetious must mean that there’s sh*t coming out of your mouth? Either way, what’s the point of your post?

Jun 7, 2013 at 11:42 pm

One of the best articles I’ve ever read on Golfwrx. Nice to hear about more about shafts than the usual weight, launch profile, fluorescent colors, and who’s playing it on tour. Informative, clear, great photography.

Please inject me with more technical shaft dope.

John Strathman

Jun 7, 2013 at 8:23 pm

I always thought there was a hole in selecting KBS shafts. I hit Tour’s with two iron sets and just went back to DG S300’s on my last purchase. Well there is always tomorrow…

Jun 6, 2013 at 7:42 pm

forget the c-taper lights, give me the tour v2s!!

Jun 6, 2013 at 9:42 pm

Seriously wish they would, as this sounds like the perfect shaft I’m wanting. Kbs tour feel with a more dg like trajectory or even slightly lower spinning and I would pay big $$$!

Jun 7, 2013 at 11:57 am

Huh? DG says it is LOW launch, so how can it be more like DG trajectory? You don’t know what you’re talking about. Why not use something like DG XP hardstepped a couple times?

Jun 7, 2013 at 7:38 pm

Huh?? That’s exactly what I’m saying, if the KBS had a shaft with the SAME LOW launch of the DG with the FEEL similar to the KBS tours, with a possibly touch less spin than a DG.

Jun 9, 2013 at 8:54 pm

I don’t want to pay big bug I want them

Jun 16, 2013 at 9:45 pm

$39 per shaft!? There better be GOLD weaved in there!

Xander Walsh

Jun 6, 2013 at 6:20 pm

Great article. I enjoyed the read.

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed .

You may like

Lee Trevino’s wildly interesting $5,000+ club setup at the PNC Championship

The story behind the mysterious “Monstar Full Titanium” driver shaft spotted on the PGA Tour

The 3 most popular driver shafts used by the top-50 golfers in 2023

SPOTTED: True Temper’s all new Project X Wedge shafts

Spotted: Graphite Design Tour AD IZ

A Focus on Feel: Project X launches new Even Flow shafts

Whats in the Bag

Richy werenski witb 2024 (may).

• Richy Werenski what’s in the bag accurate as of the CJ Cup Houston Open.

Driver: Titleist TSR3 (10 degrees, D1 SureFit setting) Shaft: Mitsubishi Diamana PD 60 TX

3-wood: Titleist TSR2 (15 degrees, A1 SureFit setting) Shaft: Fujikura Ventus Red 8 X

Check out more in-hand photos of Richy Werenski’s clubs in the forums.

Hybrid: Titleist TSR3 (19 degrees, D1 SureFit setting) Shaft: Mitsubishi Tensei CK Pro White Hybrid 90 TX

Irons: Titleist T100 (4-9) Shafts: Nippon N.S. Pro Modus3 Tour 105 S

Wedges: Titleist Vokey Design SM9 (46-10F, 50-12F), Titleist Vokey Design WedgeWorks Proto (54-M, 58-L @60) Shafts: True Temper Dynamic Gold Tour Issue X100 Onyx (46-50), True Temper Dynamic Gold Tour Issue S400 Onyx (54-60)

Putter: Scotty Cameron prototype

Ball: Titleist Pro V1x Left Dash

Grips: Golf Pride ZGrip Cord

Adam Scott testing green “Masters Use Only” putter + 6 interesting equipment photos from the 2024 CJ Cup Byron Nelson

Welcome to the 2024 CJ Cup Byron Nelson event at TPC Craig Ranch in McKinney, Texas, which, for your geographical reference, is about 25 minutes from Dallas.

In early-week equipment news, we saw some interesting putter testing from Adam Scott, a Maxfli golf ball signing on the PGA Tour, a 16-year-old’s WITB, a PGA Tour player using another PGA Tour player’s backup putter, and Jordan Spieth weighed in on why he recently switched out just his 7-iron (and then made a hole-in-one with it).

With so much to report and so little time to waste on the intro, let’s get right into this week’s equipment rundown from the CJ Cup Byron Nelson.

See all of our photo galleries from the week here 

Adam Scott’s new L.A.B. putters

Before we get into a couple of the new prototypes Scott has been testing, above is a photo of the L.A.B. Golf Mezz.1 Max prototype putter that he’s been using, and will likely continue to use this week in Texas.

That being said, following the Masters, Scott was looking to try a couple putters with a slightly lighter weight to help with his feel on fast greens.

One of the new prototypes we spotted on Tuesday was a L.A.B. Golf DF3 “Proto 2.1”, custom-built with Scott’s preferred blue colorway, and an Australia-inspired Kangaroo laser engraving…

We also spotted him with a green-colored “For Masters Use Only” Mezz.1 Max prototype…

While it’s unlikely Scott will make a switch this week, it’s certainly something to keep an eye on going forward, especially on courses with faster greens.

We also got a peek into Scott’s full WITB this week, which consists of a super-mixed set of Srixon irons, including a ZX Utility 3-iron, a ZX-5 MkII 4-iron, ZX-7 MkII mid-irons (5-7) and Z Forged II short irons (8-9).

See Scott’s full WITB from the CJ Cup here

An update on Daniel Berger’s Odyssey Jailbird

Last week in New Orleans, we highlighted Daniel Berger’s Ai-One Jailbird Mini putter because of its unique sightlines.

Well, we have an update.

According to Callaway Tour Manager Joe Toulon, who spoke with GolfWRX.com this week, Berger’s Jailbird Mini is actually from fellow Tour player Tom Kim’s stash. Kim is a prolific putter tester, and the exact putter Berger is currently using was actually originally made for and tested by Kim. The putter didn’t make it into Kim’s starting lineup, however, so he gave the putter back to Odyssey, and it eventually made it’s way onto Berger’s gamer roster.

Jordan Spieth’s new 7-iron

As the story goes, Jordan Spieth changed out his Titleist T100 7-iron on Wednesday before the 2024 Valero Texas Open, and then on Thursday, he used the 7-iron to make a hole-in-one from 199 yards on the 16th hole.

Good timing on that switch, Jordan.

On Tuesday at the 2024 CJ Cup Byron Nelson, GoflWRX.com caught up with Spieth to get the full story on why he switched just the 7-iron.

Our full story is over on PGATOUR.com’s Equipment Report , but here’s a snippet of what Spieth had to say:

“I hit my 7-iron a lot, especially on my own. The spin rates, relative to my 6-iron and my 8-iron, were lower, so it was going too far. I was trying to figure out why, if it was something in the makeup of the iron. I got the lies and the lofts checked, and everything was fine. So finally I was like, ‘Can I just get a new one and see if it fixes it?’

“Maybe there was one other time throughout my career where I changed just one iron, so it’s very unusual. I think it’s just because the grooves were worn down from hitting it too much.”

Ben Griffin signs with Maxfli to play the golf ball

At the beginning of the year, LPGA Tour star Lexi Thompson signed a deal with Maxfli to play the company’s golf ball, and now, Griffin has officially joined team Maxfli, as well, thus expanding the company’s Tour presence.

GolfWRX.com caught up with Griffin on Wednesday in Texas for a video interview about his new golf ball of choice, and how he marks it…

  View this post on Instagram   A post shared by GolfWRX (@golfwrx)

A 16-year-old is playing on the PGA Tour this week, using a 2-iron!

Amateur golfer Kris Kim, at just 16 years of age, is making his PGA Tour debut this week after receiving a sponsors exemption into the event. In 2023, Kim won both the R&A Boys’ Amateur Championship and the European Boys’ International Championship.

On Tuesday in Texas, we got a look into Kim’s bag, which revealed that he’s currently playing a TaylorMade P-770 2-iron, and a bag full of TaylorMade clubs.

Check out Kim’s full WITB here

A smart golf ball stamping

I’m not going to sit here and pretend to be a big math guy, because I’m not. However, I do recognize David Nyfjall’s purple ball marking as a square root symbol.

While I don’t know the particular significance of the square root symbol for Nyfjall, I do know you have to be fairly intelligent to even consider using a marking like that. Pretty cool stuff from the Northwestern alum, and 2023 Byron Nelson Award winner.

And, with that, we say goodbye to Texas and TPC Craig Ranch. We’ll see you next week at the Wells Fargo Championship in Charlotte for more insider equipment news and storylines.

For now, don’t forget to check out all of our photos from the 2024 CJ Cup Byron Nelson

Wesley Bryan WITB 2024 (May)

• Wesley Bryan what’s in the bag accurate as of the CJ Cup Byron Nelson.

Driver: Callaway Paradym Ai Smoke Triple Diamond Max (9 degrees @10) Shaft: Mitsubishi Diamana GT 50 TX

3-wood: TaylorMade Stealth Plus (15 degrees) Shaft: Mitsubishi Diamana GT 60 X

• Check out more in-hand photos of Wesley Bryan’s clubs here. 

Hybrid: TaylorMade Stealth 2 Plus Rescue (19.5 degrees) Shaft: Fujikura Ventus HB Blue 8 X

Irons:  Titleist T200 (4), Takomo 101U (4), Takomo 101T (5), Takomo 301 CB (6-9) Shafts: True Temper Dynamic Gold Tour Issue X100

Wedges: Titleist Vokey Design SM10 (46-10F, 52-08F, 56-14F), Titleist Vokey Design WedgeWorks Proto (58-A) Shafts: True Temper Dynamic Gold Tour Issue S400

Putter:  L.A.B. Golf DF3

Grips:  SuperStroke, Golf Pride Tour Velvet

Ball: Titleist Pro V1x

More photos of Wesley Bryan’s WITB in the forums.

Dave Portnoy places monstrous outright bet for the 2024 Masters

John Daly stuns fans into silence with brutal opening tee shot on PGA Tour Champions

Justin Thomas on the equipment choice of Scottie Scheffler that he thinks is ‘weird’

Things got heated at the Houston Open between Tony Finau and Alejandro Tosti. Here’s why

Tiger Woods arrives at 2024 Masters equipped with a putter that may surprise you

‘Absolutely crazy’ – Major champ lays into Patrick Cantlay over his decision on final hole of RBC Heritage

Report: Tiger Woods has ‘eliminated sex’ in preparation for the 2024 Masters

Two star names reportedly blanked Jon Rahm all week at the Masters

2-time major champ announces shock retirement from the sport at age of 33

Report: LIV Golf identifies latest star name they hope to sign to breakaway tour

Richy Werenski what’s in the bag accurate as of the CJ Cup Houston Open. Driver: Titleist TSR3 (10 degrees, D1...

Wesley Bryan what’s in the bag accurate as of the CJ Cup Byron Nelson. Driver: Callaway Paradym Ai Smoke Triple...

Adam Scott WITB 2024 (May)

Adam Scott what’s in the bag accurate as of the 2024 CJ Cup Byron Nelson.  Driver: TaylorMade Qi10 (10.5 degrees)...

Pierceson Coody WITB 2024 (April)

Driver: TaylorMade Qi 10 (9 degrees) Shaft: Mitsubishi Tensei 1K White 70 TX 3-wood: TaylorMade Qi 10 Tour (15 degrees)...

Neal Shipley presser ends in awkward fashion after reporter claims Tiger handed him note on 8th fairway

Brandel Chamblee has ‘no doubt’ who started the McIlroy/LIV rumor and why

What we know about Bryson DeChambeau’s 3D-printed Avoda irons

LET pro gives detailed financial breakdown of first week on tour…and the net result may shock you