taylormade tour burner irons release date

TaylorMade Irons by Year

By Coach Erik Schjolberg – Feb 23, 2024

*This post contains affiliate links, we earn commission if products are purchased ( more info ).

*Read our review guidelines .

List Of All Taylor Made Irons Models by Year Released

TaylorMade irons by year table: Note – if a set of irons is listed twice, it means they were re-released in separate years

TaylorMade Irons Over the Last 5 Years

Qi Irons: Game improvement iron designed to take the right miss out of a player’s game. Optimized CG placement for each club in the set allows for perfect launch characteristics throughout the set.

Qi HL Irons: The “HL” stands for higher and lighter. With weaker lofts, and lightweight components to make the irons easier to swing and launch the ball.

The last five years have really shown the innovation at TaylorMade. Mostly through improvements of popular models. The uber popular, and high performing P790 debuted in 2017, and has gone through internal and external changes. These changes are making them even longer and more forgiving.

The P790 is widely regarded as one of the best performing irons on the market. Great feel, distance, forgiveness, and compact design make it an appealing option for tour players and weekend warriors alike , which is uncommon to say the least. Check out the full P790 specs and lofts for more info.

TaylorMade has released a flagship iron alongside the driver every year since 2017. Most recently the Stealth irons. Stealth follows suit behind SIM2, SIM, and the M series. These irons are labeled as game improvement irons , and are a good selection for a wide variety of players.

TaylorMade has no shortage of “player” options too, with regular releases and updates to the P770 specs , the P7MC, and P7MB. Even releasing a Tiger Woods model, the P7TW , TaylorMade has options for all comers.

If you’re looking for the latest womens irons, check out our reviews here .

TaylorMade Burner Irons by Year

The TaylorMade Burner series began in 1993 with the Burner Midsize. It was a unique design with foam and perimeter weighting. This did wonders for forgiveness. The Burner series went on to win majors, and spearhead iron innovation.

In 1996 and 1997 TaylorMade released a series of Burner Bubble irons. The 96’ Burner Bubble Tour was in the bag for two of the four majors in 96’ , which gave some serious validity to the line. 97’ brought the Ti Bubble 2 which was the introduction of using multiple materials to lower the center of gravity, which helped improve distance.

The Burner line was shelved for over a decade until 2008. By then TaylorMade had discovered and mastered “SuperFast Technology.” This inverted cone behind the face, and multi material construction to deliver today’s players distance iron.

TaylorMade Irons History

In 1979 TaylorMade broke ground on one club. A 12 degree stainless steel metalwood. They wasted no time breaking into the iron space. 1980 marked their first ever iron release .

TaylorMade released first the KVD irons, named after the designer Ken Venturi. That same year they released the PR1 iron.

TaylorMade remained a “tour preferred” lineup until 1991. The release of the ICW 11, with a progressive offset, and more forgiveness was marketed as an iron set for the everyday player. From then on, TaylorMade released various club selections for every type of golfer to help make the game more enjoyable.

How Often Does TaylorMade Release New Irons

TaylorMade is one of a few manufacturers that regularly releases new and improved options for all types of golfers . From 2008 until present, you can rely on TaylorMade to release a new iron set every year.

These yearly releases contain incremental improvements from the year prior, and tend to offer something for every type of player. For the last decade, TaylorMade has released iron sets alongside their yearly metalwood sets, such as the newest Stealth lineup. You could almost set a watch to it.

Close up shot of the P7TW in Tiger Wood’s bag

Other Brand’s Irons by Year

Check out the complete list of Ping irons by year . Check out the complete list of Callaway irons by year released here . Check out the complete list of Titleist irons by year released here . Check out the complete list of Mizuno irons by year released here . Check out the complete list of Wilson Staff irons by year released here .

About the Author

By Coach Erik Schjolberg – Last Updated Feb 23, 2024

Expertise: Golf Instruction Golf Equipment Testing Golf Practice Programs Online Golf Instruction

Coach Erik actively coaches several PGA Tour Professionals . He’s the head golf instructor and writer here at Swing Yard, was voted the “#1 Golf Coach in Scottsdale, Arizona”, and has been coaching for over 20+ years. Erik also owns and operates his own online golf school, EJS Golf Academy . His other credentials include: Active PGA Coaches Membership, Titleist TPI Level 1 and 2, Trackman Certified Level 1, Dr. Kwon’s Biomechanics Level I and II, Scott Cowx Certified Level I Advanced, BodiTrack and V1 Sports Pressure Mat Certified, Titleist Club Fitting and Ball Fitting Certified, PGA Hope, and Sportsbox AI. Check out Erik’s full bio and certifications for more info.

taylormade tour burner irons release date

2 thoughts on “TaylorMade Irons by Year”

Wohh precisely what I was searching for, thanks for putting up.

Thanks, glad you got some value from all this hard work!

TaylorMade Irons By Year: The Complete List!

For over 40 years, TaylorMade has created dozens of golf irons used by tour professionals and everyday golfers alike.

My first set of irons was the TaylorMade RAC OS — first released in 2003. These clubs served me very well, and still perform perfectly over 20 years later!

In this article, you’ll find a comprehensive list of TaylorMade irons by year.

So, let’s get into it!

TaylorMade Irons By Year

TaylorMade launched its first golf iron in 1980 and has since become one of the leading golf club manufacturers in the world. The current Qi irons are designed for higher handicappers seeking maximum forgiveness, while the P-line irons feature a small and sleek head profile design for the better player.

Here is a full list of every TaylorMade iron release:

TaylorMade Irons: 1980-1989

Having immediate success with the innovation of metal drivers in 1979, TaylorMade didn’t hesitate before expanding into other golf clubs the following year.

In 1980, TaylorMade debuted the KVD irons . With a design inspired by golf professional Ken Venturi, the KVD irons marked the beginning of 5 decades of golf irons.

Soon after, the iconic TaylorMade Technician irons were released in 1984. These were the first TaylorMade irons to include a rounded camber sole for better turf interaction, along with a lower center of gravity to help increase launch.

In 1985 and 1986, TaylorMade developed the Tour Preferred F and Iron Cleeks .

Check out the video below by The Vintage Golfer , where he discusses the classic TaylorMade Tour Preferred stainless steel blade irons:

In 1987, TaylorMade dropped the Tour Preferred TD irons . These featured a players iron look, with a hollow club head on the 1 through 4 irons for increased forgiveness .

At this time, the company completed the construction of a new 90,000-square-foot production plant in Carlsbad, giving them the capacity to meet increasing demand as it transitioned from a small startup into a golf manufacturing powerhouse.

TaylorMade Irons: 1990-1999

In the 1990s, TaylorMade experienced explosive growth.

1991 saw the launch of the TaylorMade ICW irons . These were available in two variants: one for the better players (ICW 5), and one for the everyday golfer (ICW 11).

Soon after came the release of the TaylorMade Burner Midsize . The Burner featured a revolutionary foam-filled club head, with refined weight distribution around the edges of the club. This allowed for a larger sweet spot, for added forgiveness.

In 1996, TaylorMade developed the Burner Bubble Oversized irons . Designed with greater offset and a larger club head, these irons allowed for greater workability of ball flights in the mid to short irons, with better forgiveness in the long irons.

The Burner Bubble Tour irons were released alongside the Oversized irons in 1996 and became TaylorMade’s first iron to gain significant adoption on the PGA Tour.

In the final year of the decade, TaylorMade produced both the SuperSteel irons and the FireSole irons . The FireSoles caught on due to the unique multi-material usage — built from titanium along with tungsten sole weights for added forgiveness and launch.

TaylorMade Irons: 2000-2009

Having closed a $1.5 billion deal in 1997, TaylorMade continued its growth into the new millennium with a persistent launch of new golf clubs.

In 2000, they launched the TaylorMade 300 irons . Designed with three different club head sizes for a variety of skill levels, the 300 series featured a cavity-back shape with a progressive center of gravity, offering improved ball flight.

Next, 2002 saw the introduction of RAC technology, starting with the RAC LT irons . RAC, or Relative Amplitude Coefficient, was characterized by ‘feel pockets’ in the back of the club head, designed to improve forgiveness, distance , and feel.

In 2003, TaylorMade released the RAC OS irons . These came with altered weight distribution to increase MOI and further improve feel.

Over the following years, TaylorMade revised the Burner series. This included the larger TaylorMade Burner Plus , along with Tour Burner and Burner 1.0 irons .

Finally, the TaylorMade R9 series was introduced. In short, the traditional R9s were popular with everyday golfers, while the TP version was widely adopted on tour.

TaylorMade Irons: 2010-2019

In 2010, the TaylorMade Burner 2.0 irons were introduced. Intended for the everyday golfer as a game-improvement iron, the Burner 2.0 featured a unique gun-metal finish.

The following year, TaylorMade launched the R11 irons as a replacement for the R9.

Next came the RBZ and RBZ MAX irons — AKA RocketBallz. Despite the strange name, these were certainly a popular iteration for TaylorMade, designed for ultimate distance and pinpoint accuracy. The design drew inspiration from their metal-wood history.

In 2013, TaylorMade released the RocketBladez . These irons proved an even greater hit than the previous year’s version, containing a slot in the sole for added consistency.

Alongside their game improvement lineup, TaylorMade steadily introduced sleek-profiled irons for the better player. The Tour Preferred MB irons proved very popular on tour and were used by Dustin Johnson and Justin Rose for several years after release.

In 2017, TaylorMade launched the P730 , P750 Tour Proto , P770 , and P790 irons . This stacked release offered a sleek design for a variety of skill levels.

Alongside this, we saw the release of the M-series game improvement irons. Designed with chunkier bodies and thicker toplines, these iterations offered great forgiveness.

In addition, Tiger Woods worked with the brand to release the TaylorMade P7TW irons . Featuring a beautiful, yet unforgiving design — they’re certainly for the better player!

TaylorMade Irons: 2020-Present

Since 2020, TaylorMade has continued to see massive success on the PGA Tour and wider golf space among millions of everyday golfers.

The P790 , P7MC , and P770 irons all received design refreshes, continuing the sleek appearance that received plenty of success in the previous iterations.

In 2022, the TaylorMade Stealth irons were released. With lots of forgiveness and a modern and premium look, they’re a great pick for higher handicap players.

The following year, TaylorMade refreshed the P790 irons . This fourth iteration of one of the most popular iron sets of all time retains much of the charm of the original irons while adding some welcome refinements.

In 2024, the Qi irons were introduced. According to TaylorMade, these are “the straightest irons in golf” — with a focus on accuracy rather than distance.

With a cavity back shape and dark accents, the Qi club head design is fairly reminiscent of the previous generation Stealth irons.

Overall, they’re an excellent choice for beginner golfers — as well as those who prefer a bit of forgiveness in their irons.

Check out the TaylorMade Qi irons at Worldwide Golf Shops below:

TaylorMade Qi Irons

– Straighter ball flights – Forgiving and long – Easy to hit

– Premium price point

Share This Article:

Jake Taylor

Hailing from the South West of England, Jake has been playing golf for over a decade. He founded Pitchmarks with the aim of helping everyday golfers like himself learn more about the game, through instructional content and honest gear reviews. He has a degree in Architecture and a passion for golf course design, along with a lofty goal to play the world's top 100 courses.

Get weekly golf deals in your inbox.

You have successfully joined our subscriber list.

Instruction

Editorial Policy

TaylorMade Tour Burner Game Improvement Irons Review

Published: 15 April 2008 Last updated: 26 November 2015

At a glance

TG Rating 4.5 out of 5
Owner Rating 4.8 out of 5
RRP £499.00

What we say...

TaylorMade’s latest irons proved incredibly popular in this test, and the new Tour Burner irons were only just pipped to another Gold award. They are designed to offer the highest possible COR from a very thin and fast 2.2mm face, along with burner ball speed and distance. Our testers absolutely loved how easy these were to hit, along with the seemingly effortless distance and the stylish design. There’s plenty of technology on view with these, with a multifunctional sole and inverted cone technology to offer consistently long distance on off-centre hits. The Tour Burner irons are fantastic clubs for mid handicappers in particular, and only something very special kept these stunning new irons off our top spot.

Contact: 0880 389 4292 Wesbite: www.taylormadegolf.com Price: £499 (s) £599 (g)

Product Information

Your reviews, taylormade irons user reviews.

4 out of 5 Very Good! 22 July 2015

By Jwbeekmans

Have used them for many years now, and they are very good. Respond well to your actions. But now (2015) i'am looking for a new set. Why? Not because the Tour Burners don't work anynmore. I just want a little more help and still want the precision. Looking at Pin G25 irons. G30 has to much offset for me...

5 out of 5 Fantastic 26 July 2010

After a great deal of research and testing I finally came across the burners, and what a set of clubs they are. Having a handicap of 18 it is important for me that I have the right set of clubs. The burners offer a solid but light feel with a reasonable amount of forgiveness whilst rewarding generously when struck well, not to mention that they look the part, especially with the graphite shafts. The only draw back for me is that shortly after buying these clubs the super launch range was unveiled, but thats life I supose. By far the best clubs in their price range, Taylor Made have succesfully gained a life long customer.

5 out of 5 Exceptional irons and value 10 October 2009

By julianwilson

Sadly I have bought four sets of irons in the olast three years, striving to find the perfect one - some too lumpy and easy (ping g10) and some too difficult and well above my capacity (Mizuno MP52). These Taylormade's are just right for my 9 handicap - they let you manipulate the ball if you are having a good day but still forgiving and straight on your bad days. I also noted the distance was a good 10-20 metres better than on competing irons. Greatest thing about these clubs - the R9 irons will undermine demand for the tour burner so this exceptional club will also be available at very low prices. A steal I'd recommend to anyone.

5 out of 5 TM Burner Irons 10 July 2009

By creativeduo

These are a fantastic set of irons...The feedback you get when you hit one right out of the centre is quality... Even slightly mishit shots feel good and travel some unexpected distance...Played with several irons, but found these irons to be the most enjoyable.

5 out of 5 my new irons 11 June 2008

By Wheathill's finest

brilliant. I also tryed the nike sumo's as well but the looks,weight, and taylormade are more experienced golf company. but nike do make brilliant gear as well .got them on the 3rd of june and won the nett trophy on my debut at the mens club chapionship at my home club.

TaylorMade Irons by Year: 40+ Years of History

TaylorMade irons are renowned for their forgiveness and distance. That is part of the reason they are still so well-loved after first turning out in 1980. More than four decades later, they are still doing the business.

Though, they didn’t start out with irons. Gary Adams founded TaylorMade Golf a year before that and the only product offered was a metal driver with 12 degrees of loft. One year later, TaylorMade iron history began with a design inspired by Ken Venturi.

So, let’s take a look at the TaylorMade irons by year – it will be a trip down memory lane. We will also look at how the irons have changed over the years and how you can use these changes to your advantage.

List of TaylorMade Iron Models by Year

Will there be new taylormade irons in 2024, taylormade irons from the 2010s, taylormade irons from the 2020s, 1980s & 1990s, be mindful of your handicap, don’t go over budget, they need to look the part in your eyes, final thoughts, when did taylormade make burner irons, how long do taylormade irons last.

We took a trip through the TaylorMade archive to find a list of every iron released by the company:

Yes, TaylorMade is just about to release new irons for 2024. The Stealth HD irons will be released in retail February 17th and will cost $999.99. The focus of the new irons is to deliver high launching distance in addition to a draw bias so golfers can expect better shots more regularly.

SIM Max Irons

The SIM Max, released in 2020, is designed for forgiveness whilst maximizing distance. It has a lovely forged-like feel too thanks to the improved Speed Bridge and ECHO Damping System.

SIM 2 Max OS Irons

Also released that year was the SIM 2 Max OS . It is the longest and most stable iron that TaylorMade had produced upon creation. That is helped by the oversized construction and a sweet spot that accounts for the most common impact points.

Stealth Irons

Imagine a nice forged-feeling club that is both fast and forgiving. Open your eyes and you have the Stealth irons. The new CG placement makes it easy to launch high to provide long carry distance too.

Tips for Choosing the Right TaylorMade Iron Set for Your Game

Your handicap can be a good indication of what TaylorMade iron will suit you . Higher handicappers will be better off using game-improvement irons that are designed for forgiveness and distance. The Stealth and the Sim Max irons are suited to beginners and high-handicappers.

If you are of a lower handicap and looking to improve, the finer details in your game players’ irons will probably be for you. They suit those primarily looking for distance control, workability, and feel. Clubs like the P770 with longer blade length and a thinner top line will work well for you.

If you are of a higher handicap, that doesn’t mean you aren’t allowed to look at irons to suit better-quality golfers or aspire to play with them. With your current ability, you would probably find it tougher to get the best out of them so you should suit game improvement irons more.

You need to consider how much you will spend on new irons. You could have found a set of irons that, on paper, look and read like they will enhance your game ten folds but they cost $999 and that may be out of your budget and it is not worth going over that.

Even if it looks and feels right for you, don’t force it if it is too expensive. There will be cheaper alternatives that you can buy that can be very similar. Additionally, if you really wanted a specific club but didn’t want to pay the premium price, it may be worth looking at where you can get used TaylorMade clubs instead.

If your new TaylorMade irons look the part, you will probably feel the part too. What I mean by that is if you are very pleased with the look and design of your new irons, it will bring about confidence that you are going to play well in them and enjoy using them.

For example, if you are a high handicapper and have a thick topline in your club, it may provide some comfort knowing that it is more forgiving than other clubs. This will only contribute positively to your game.

Otherwise, if you just have some irons you aren’t encouraged by with a design you aren’t very keen on, you may lack confidence in your setup, which could impact your swing and connection with the ball. One thing leads onto another.

Now you know about both new and old TaylorMade irons. You are aware of the history of the irons, how they have changed, and which clubs you can use to help you now.

So, whether you take away some facts to tell your golfing friends or spend more time choosing the right iron for you, we hope you have found it useful.

Perhaps we will return in another four decades to recount the TaylorMade irons by year then too…

Burner irons first came out in 1993. They were the Burner Mid Size and then came the Burner Double Oversized (1996), Burner Bubble Tour (1996), and the Burner Bubble LCG (1997). Further Burner irons were released in 2008, 2009, and 2010.

TaylorMade irons will last a similar length of time to other irons on the market. A rough time frame is around 8 - 12 years or 300 games of golf. The irons will last a shorter length of time if you play twice per week and if they aren’t looked after too, this could impact their lifetime.

You might also like these

CONNECT WITH US

TaylorMade Irons By Year – A Comprehensive Guide To TaylorMade Irons From 2010 To 2021

Brenda draughn.

August 17, 2023

Discover the evolution of TaylorMade irons from 2010 to 2021. Explore the advancements and improvements in TaylorMade iron technology over the years. A comprehensive guide to TaylorMade irons by year.

TaylorMade Irons by Year

Introduction to taylormade irons.

When it comes to golf equipment, TaylorMade is a brand that stands out for its innovation and quality. With a strong reputation in the golfing community, TaylorMade has consistently delivered top-notch irons that cater to players of all skill levels. In this section, we will explore the evolution of TaylorMade irons over the years, from their introduction to the latest trends and future possibilities.

TaylorMade Irons in 2010

In 2010, TaylorMade introduced a range of irons that revolutionized the game. One of the standout models was the TaylorMade Burner 2.0. This iron set featured improved technology, including a thinner face and a lower center of gravity. These advancements resulted in increased distance and forgiveness, making it a popular choice among golfers.

TaylorMade Irons in 2011

Building on the success of the Burner 2.0, TaylorMade continued to innovate in 2011 with the release of the TaylorMade RocketBallz iron set. This set incorporated a “Speed Pocket” design, which enhanced ball speed and distance. The RocketBallz irons also featured a progressive head design, offering a balance between forgiveness and playability.

TaylorMade Irons in 2012

In 2012, TaylorMade introduced the TaylorMade RocketBladez irons, which took distance and forgiveness to the next level. These irons featured a “Speed Pocket” in the 3-7 irons, allowing for increased ball speed and distance on off-center hits. The RocketBladez irons also had a redesigned clubhead shape, optimizing forgiveness and playability.

TaylorMade Irons in 2013

Continuing their streak of innovation, TaylorMade launched the TaylorMade SpeedBlade irons in 2013. These irons boasted a “Speed Pocket” with a larger sweet spot, resulting in enhanced ball speed and forgiveness. The SpeedBlade irons also featured an improved sound and feel, making them a favorite among golfers seeking both performance and aesthetics.

TaylorMade Irons in 2014

In 2014, TaylorMade introduced the TaylorMade SLDR iron set. These irons featured a low and forward center of gravity, resulting in a higher launch angle and increased ball speed. The SLDR irons also incorporated a thin, flexible face, maximizing distance and playability. With their sleek design and improved performance, the SLDR irons gained popularity among golfers of all levels.

TaylorMade Irons in 2015

Building on the success of the SLDR irons, TaylorMade launched the TaylorMade RSi iron set in 2015. These irons featured face slots, which improved forgiveness and consistency on off-center hits. The RSi irons also included a progressive multi-material construction, optimizing performance throughout the set. With their advanced technology and sleek design, the RSi irons became a go-to choice for many golfers.

TaylorMade Irons in 2016

In 2016, TaylorMade introduced the TaylorMade M2 iron set, which offered exceptional performance and forgiveness. These irons featured a low center of gravity and a thin, fast face, resulting in high launch angles and increased distance. The M2 irons also incorporated a redesigned Speed Pocket, enhancing forgiveness on off-center hits. With their impressive performance and sleek appearance, the M2 irons became a popular choice among golfers worldwide .

TaylorMade Irons in 2017

Continuing their commitment to innovation, TaylorMade launched the TaylorMade M1 iron set in 2017. These irons featured a compact head design, providing a combination of workability and forgiveness. The M1 irons also incorporated a “Face Slot” technology, enhancing forgiveness on shots struck towards the toe or heel. With their versatility and performance, the M1 irons appealed to both amateur and professional golfers.

TaylorMade Irons in 2018

In 2018, TaylorMade introduced the TaylorMade P790 iron set, which combined distance, playability, and feel. These irons featured a forged construction with a hollow body design, allowing for enhanced forgiveness and distance. The P790 irons also incorporated SpeedFoam technology, which provided a soft feel at impact. With their sleek design and exceptional performance, the P790 irons gained popularity among golfers looking for a balance of distance and control.

TaylorMade Irons in 2019

Building on the success of the P790, TaylorMade launched the TaylorMade M5 and M6 iron sets in 2019. These irons featured Speed Bridge technology, which connected the sole and the topline of the clubhead, resulting in increased ball speed and forgiveness. The M5 and M6 irons also incorporated a “Hybrid Iron” design, combining the best attributes of both irons and hybrids. With their advanced technology and impressive performance, the M5 and M6 irons appealed to golfers seeking maximum distance and forgiveness.

TaylorMade Irons in 2020

In 2020, TaylorMade introduced the TaylorMade SIM and SIM Max iron sets. These irons featured a revolutionary Speed Bridge technology, which provided increased distance and forgiveness. The SIM and SIM Max irons also incorporated an ultra-thin face design, optimizing ball speed and playability. With their sleek design and cutting-edge technology, the SIM and SIM Max irons became a popular choice among golfers looking for exceptional performance and aesthetics.

TaylorMade Irons in 2021

As of 2021, TaylorMade continues to push the boundaries of iron technology. While specific details about the latest iron models are not available at the time of writing, golfers can expect TaylorMade to deliver innovative designs and performance-enhancing features. TaylorMade’s commitment to research and development ensures that their iron offerings will continue to evolve and meet the needs of golfers at all levels.

Conclusion and Future Trends

Looking ahead, it is exciting to anticipate what TaylorMade has in store for the future. With advancements in materials, clubhead design, and performance-enhancing technologies, golfers can expect even more impressive iron offerings from TaylorMade. Whether it’s increased ball speed, improved forgiveness, or enhanced playability, TaylorMade will undoubtedly continue to deliver irons that cater to the ever-evolving needs of golfers.

In summary, TaylorMade’s irons have come a long way since their introduction. Each year, the brand has introduced new technologies and designs that have revolutionized the game. From the Burner 2.0 to the SIM and SIM Max, TaylorMade’s commitment to innovation has consistently delivered exceptional performance and playability. As golfers look to the future, they can expect TaylorMade to continue leading the way in iron technology, providing golfers with the tools they need to excel on the course.

Photos of TaylorMade irons from the last 35 years

TaylorMade has been making irons for more than 35 years, and depending on how long you’ve been playing golf, there’s a decent chance you’ve used one or more of the iron sets below.

Our slideshows cover each decade of TaylorMade irons, and we’ve captioned certain photos to help put the company’s iron launches in historical context. For more on the past, present and future of the iron-design process, make sure to read our deep dive on the topic: How TaylorMade designs its next set of irons .

What’s your favorite set of TaylorMade irons from the ’80s, ’90s, ’00s and ’10s? What did you like about them? Which sets did you buy, and which ones would you still use today? Let us know in the comments section at the end of this article. And remember, you can click the photos to enlarge them and read the full captions.

Stacy Lewis switches to Happy Putter prototype with adjustable alignment

10 Revealing Photos from the Zurich Classic of New Orleans

We share your golf passion. You can follow GolfWRX on Twitter @GolfWRX , Facebook and Instagram .

42 Comments

Things You Can Do To Cost Of Replacing Double Glazing Brentwood With Exceptional Results. Every Time

Apr 3, 2022 at 1:51 pm

Find a local window repair service to help Things You Can Do To Cost Of Replacing Double Glazing Brentwood With Exceptional Results. Every Time fix your windows that are broken. Before you employ a person to fix your windows, ensure that they are licensed and insured. Different states have different licensing requirements.

May 6, 2016 at 12:22 am

The 1987 TM TD Tour Preferred Iron was one of the best irons ever, and a LH model was available.

Some of these newer models like the TM TP Forged from 2005 were a nod to the MacGregor MT Wingbacks from 50 years earlier. Coin Forged? Smoke? RH only to be sure, and Miura made?

Taylor Made golf made a LH Forged 300 set for Mike Weir and he won the Masters, then promptly said they would NOT make this model available to other LH golfers. DID NOT CARE.

The current TM Tour Preferred blade iron is also RH only, and is a nod to the first Ben Hogan Precision model from 1954-55.

TM’s first Pittsburgh Persimmon Models were game changers, but for the most part their iron models remain Right Hand only.

May 2, 2016 at 1:51 pm

Interesting – had kind of forgotten how popular TM irons were in the past decades, and how well regarded they used to be. All those clubs listed, and it doesn’t include the only TM irons i ever played – Rocketbladez Tour. Completely different club than the std. Rocketbladez

Apr 30, 2016 at 3:59 am

I hit a friends 1993 or so Taylor Made original Burner Driver last week 10 degree. Hit it great on a tight hole 260 yards right down the middle or so at 43.5 inches long. My sldr I probably hit 280-288 yards avg. The old Taylor hit it nice and low very boring flight. I am about a 7 handicap and had it to two under yesterday after 14 holes great for me. The home stretch the holes were all dead into a 20mph wind and I fell apart sprayed a few drives and finished 3 over par. I think if I had that original burner driver on those last few holes things may have been different. When hit on the screws the clubs from the 1990’s still preform very well. I hit a original burner 5 wood 1993 model all through high school golf and I really don’t find that club much different than today’s hybrid clubs in head shape trajectory or ease of hitting the sweet spot. Sure on down wind drives the new stuff will really crush the small headed drivers but I am thinking to pick up one of those original Taylor Made Burners for tight tracks and windy days is good to have.

May 1, 2016 at 1:56 am

It’s the ball. Pick the right ball, the one that has lower trajectory. So much technology is in the balls now.

Apr 29, 2016 at 10:00 pm

Too many products!

Apr 29, 2016 at 9:59 pm

What happened to the ferrules?

Apr 30, 2016 at 12:44 pm

these are just heads, no shaft. A loose shaft was just put in so show the address position better, hence no ferrule

Apr 29, 2016 at 6:59 pm

@ The Man! Fantastic list!! The ICW 11’s!! Oh, those bring back memories. I did some serious damage to courses with those sticks!

Apr 29, 2016 at 4:48 pm

Its great that GOLFWRX has put up these photos of TAYLORMADE irons over the last 35 years. What is not so good is that taylormade removed the whole history of their irons from their website some 3-4 years ago, completely removed it! Dumb move taylormade.

May 6, 2016 at 5:07 pm

Can’t agree more.

Apr 29, 2016 at 4:40 pm

They didn’t show the X-300 FCI limited edition forged in Japan by Miura for the Us market. Those were soft & sweet!

Apr 30, 2016 at 10:36 am

Oh yeah. Those had a good design. Figures… Miura.

Apr 29, 2016 at 4:31 pm

I played Mizuno then Miura forged but as my swing speed and ball striking declined with age, I started looking for a GI alternative with graphite shafts. The RACs were good, as were the R7 CGB Max irons ( I turned a friend on to them and he’s an avid golfer and he has no interest in upgrading) but my favorites are the SLDR irons which I re-shafted with Matrix Kujoh shafts. For me they’re the best heads ever made by TMAG

Apr 29, 2016 at 3:52 pm

TPF irons are probably the finest iron design ever. In fact still made today by a number of japan forging houses: vega irons Kyoei. The funny story here is that LOU ORTIZ of Orlimar designed them; chose to go in on the tooling with Taylormade. Have the whole story from Jesse Ortiz. Fine iron design and still playable today. LOVE looking at quality clubs of yesteryear!

Apr 29, 2016 at 3:37 pm

No ICW5s? They were gorgeous. I understand the tour heads were cast softer to improve feel.

Apr 29, 2016 at 3:07 pm

According the the PGA below (not in release order) is the full list of every TM iron set.

200 Steel 300 320 360 360 XD Aeroburner Burner 1.0 Burner 2.0 Burner 2009 Burner HT Burner LCG Burner Midsize Burner Oversize Burner Plus Burner SuperFast 3.0 Burner Superlaunch Burner Superlaunch Rescue Burner Tour Burner XD EL-1 F81 Firesole Firesole Tour ICW 11 ICW 5 Iron Cleek Kalea KVD LCG

M2 M2 Tour Miscela Miscela 2006 PR 1 PSi PSi Tour R11 r5 XL r7 r7 cgb MAX r7 cgb MAX 2008 r7 Draw r7 Draw Rescue Hybrid r7 TP r7 XD R9 R9 TP RAC CGB RAC Forged CB TP RAC HT RAC LT RAC LT 2005 RAC MB RAC MB TP RAC MB TP Smoke RAC OS RAC OS 2005 RAC TP 2005

RAC TP Combo RBZ Pro RBZ Pro Combo RocketBallz RocketBallz HP RocketBallz Max RocketBladez RocketBladez HL RocketBladez HP RocketBladez Max RocketBladez Tour RSi 1 RSi 2 RSi TP SLDR Speedblade Speedblade HL SuperSteel Titanium Bubble 2 Tour Burner Tour Preferred Tour Preferred 2009 Tour Preferred CB Tour Preferred CB 2014 Tour Preferred MB Tour Preferred MB 2014 Tour Preferred MC Tour Preferred MC 2014 X-300 FCI

Apr 30, 2016 at 9:44 pm

Now why cant we get this info from TM site?

Apr 29, 2016 at 3:01 pm

What about the Tour Prefered MCs? Great sticks.

http://www.fairwaygolfusa.com/taylormade-tour-preferred-mc-irons-p-67936.html?language=en&gclid=Cj0KEQjwjIy5BRClh8m_9Zu64d8BEiQAtZsQf8vGnM6TRxqtYdDqaZxtCNrT7evbnBn2zRDnqissV60aAvW48P8HAQ

Apr 29, 2016 at 2:51 pm

I’m sure it’s not just me, but following the time line it appears that TM’s production line used to be 2-3 years until 2007 where it went to a year, and now it is like 6 months….WTF Taylormade…

Apr 29, 2016 at 2:37 pm

Blindfold me, take off the logos, let me hit 10 different brands of similar irons and I still end up with Taylormade.

Owned Firesole Titanium Tungsten, RAC LT, now Rocket Bladz. All have been satisfying to play with. Each suited my skills at the time.

Apr 29, 2016 at 5:55 pm

You must like that plastic feel at impact

Apr 29, 2016 at 2:32 pm

Of course we all have our personal favorites on the trip down memory lane. For me, the tour preferred TDs of 1987 were my club of choice. I played them for years eventually finding the two iron 2 iron to add to add to the set. Those long irons were soooo easy to hit. (Of course I never broke a 4 hdcp., so what do I know?)

simon Burrows

Apr 29, 2016 at 1:26 pm

The TM300s are still in the bag. Yet to find anything better.

Apr 29, 2016 at 4:55 pm

Must not be looking since it’s like every iron ever

Apr 29, 2016 at 12:29 pm

I can sum up TM irons with one general statement over the years….meh….

Apr 29, 2016 at 12:52 pm

http://taylormadegolf.jp/PreviousModel_Irons_2009.html

All the Forged version have been awesome in Japan.

Pandhandle Loki

Apr 29, 2016 at 12:25 pm

Wonder who will comment 50 million times on this article

Apr 29, 2016 at 12:04 pm

My first set in golf was the TM RAC OS. I only care about their drivers anymore.

Apr 29, 2016 at 4:56 pm

What irons are you playing now?

Miquel Angel

Apr 29, 2016 at 11:52 am

Thanks for the sentimental journey. I shot in the 70’s for the first time usign the icw5 – and those RAC MP TP Smokes…wowza…

Apr 29, 2016 at 11:41 am

This was cool. It would be interesting to see for all of the top brands.

Apr 29, 2016 at 2:57 pm

I heard they thought about it, but the other brands didn’t have half the total number of irons during the same time period so they thought it would be less interesting….

Apr 29, 2016 at 4:58 pm

Still for the club ho…. We’d like to see it but want someone else to do the work for us

To be honest, does anyone think that the look of the M2 and M2 Tour irons would be better if they took out those 2 bars at the back of the iron?

Apr 29, 2016 at 12:46 pm

Apr 29, 2016 at 11:34 am

Awesome stuff.

Apr 29, 2016 at 11:08 am

missed a few sets but pretty cool to see.

Apr 29, 2016 at 10:18 am

The 300 Forged irons were some of the best irons ever made. Could easily still be gamed today.

Apr 29, 2016 at 11:18 am

You beat me to it…….yes indeed the 300s were simple but efficient.

Indeed, the 300 forged was the best they have made. Still see them in bags at the club sometimes.

My heart still flutters every time I see those irons…they as beautiful as they perform…

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed .

Whats in the Bag

Xander schauffele witb 2024 (may).

Xander Schauffele what’s in the bag accurate as of the PGA Championship.

Driver: Callaway Paradym Ai Smoke Triple Diamond (10.5 degrees @10.1) Shaft: Mitsubishi Diamana PD 70 TX (45.5 inches)

3-wood: Callaway Paradym Ai Smoke Triple Diamond (15 degrees) Shaft: Mitsubishi Diamana PD 80 TX

Check out more in-hand photos of Xander Schauffele’s clubs in the forums.

Hybrid: Callaway Apex UW (21 degrees) Shaft: Mitsubishi Diamana D+ 90 TX

Irons: Mizuno MP-20 (3), Callaway Apex TCB ’24 (4-10) Shafts: True Temper Dynamic Gold Tour Issue Mid X100 (3), True Temper Dynamic Gold Tour Issue X100 (4-10)

Wedges: Callaway Jaws Raw (52-10S), Titleist Vokey Design SM10 (56-10S @57), Titleist Vokey Design WedgeWorks Proto (60-K @61) Shafts: True Temper Dynamic Gold Tour Issue X100

Putter: Odyssey Toulon Design Las Vegas Prototype 7CH Grip: SuperStroke Zenergy Tour 2.0

Grips: Golf Pride MCC Align

Ball: Callaway Chrome Tour

More Xander Schauffele WITBs

Xander Schauffele WITB 2023 (August)
Xander Schauffele WITB 2022 (July)
Xander Schauffele’s winning WITB: 2022 Scottish Open
Xander Schauffele’s winning WITB: 2022 Travelers Championship
Patrick Cantlay, Xander Schauffele’s winning WITBs: 2022 Zurich Classic
Xander Schauffele WITB 2022 (January)
Xander Schauffele WITB 2021 (October)
Xander Schauffele WITB 2021 (September)
Xander Schauffele WITB 2021 (May)
Xander Schauffele WITB 2021 Masters
Xander Schauffele WITB 2020 (October)
Xander Schauffele WITB: 2020 Tour Championship
Xander Schauffele’s winning WITB: 2020 Olympics
Xander Schauffele WITB 2020
Xander Schauffele WITB: 2020 Sentry Tournament of Champions
Xander Schauffele’s winning WITB: Sentry Tournament of Champions
Xander Schauffele’s winning WITB: 2018 WGC-HSBC Champions
Xander Schauffele WITB 2018
Xander Schauffele’s winning WITB: 2017 Tour Championship
Xander Schauffele WITB 2017

Cam Smith WITB 2024 (May)

Cam Smith what’s in the bag accurate as of the PGA Championship. More photos from the event here.

Driver: Titleist TSR3 (10 degrees, D4 SureFit setting) Shaft: Fujikura Ventus TR Blue 6 X

3-wood: Ping Max G430 Max (15 degrees) Shaft: Fujikura Ventus TR Red 7 X

7-wood: Titleist TS2 (21 degrees, D4 SureFit setting) Shaft: UST Mamiya Elements Proto 8F5

Check out more in-hand photos of Cam Smith’s gear here.

Irons: Mizuno Pro Fli-Hi (2, 3), Titleist T100 (5-9) Shafts: KBS Tour 130 X Custom Series

Wedges: Titleist Vokey Design SM9 (46-10F, 52-08F, 56-08M, 60-04T) Shafts: KBS Tour 130X (46, 52, 56, 60)

Putter: Scotty Cameron 009M

Grips: Golf Pride Tour Velvet Tack

Ball: Titleist Pro V1x

Patrick Reed WITB 2024 (May)

Patrick Reed what’s in the bag accurate as of the PGA Championship. More photos from the event here.

Driver: Ping G400 (8.5 degrees) Shaft: Aldila Rogue Silver 125 MSI 70 Tour X

3-wood: Callaway Paradym Ai Smoke Triple Diamond (15 degrees) Shaft: Aldila Rogue Silver 125MSI 80 Tour X

Check out more in-hand photos of Patrick Reed’s clubs in the forums.

Hybrid: Callaway Apex Pro (18 degrees) Shaft: Aldila RIP Phenom Hybrid 100 TX

Irons: Titleist 716 TMB (2), Grindworks PR-202 (4), Grindworks PR-101A (5-PW) Shafts: True Temper Dynamic Gold Tour Issue X100

Check out more in-hand photos of Patrick Reed’s clubs in the forums.

Wedges: Cleveland RTX ZipCore (50-10 Mid), Titleist Vokey Design SM9 (56-08M @55), SM10 (60-04T) Shafts: True Temper Dynamic Gold Tour Issue S400

Putter: Odyssey White Hot RX Pt Customs No. 2

Ball: Titleist Pro V1

Grips: Golf Pride MCC

More photos of Patrick Reed’s WITB in the forums.

Dave Portnoy places monstrous outright bet for the 2024 Masters

Justin Thomas on the equipment choice of Scottie Scheffler that he thinks is ‘weird’

Tiger Woods arrives at 2024 Masters equipped with a putter that may surprise you

‘Absolutely crazy’ – Major champ lays into Patrick Cantlay over his decision on final hole of RBC Heritage

Report: Tiger Woods has ‘eliminated sex’ in preparation for the 2024 Masters

Two star names reportedly blanked Jon Rahm all week at the Masters

Report: LIV Golf identifies latest star name they hope to sign to breakaway tour

Neal Shipley presser ends in awkward fashion after reporter claims Tiger handed him note on 8th fairway

What we know about Bryson DeChambeau’s 3D-printed Avoda irons

Brandel Chamblee has ‘no doubt’ who started the McIlroy/LIV rumor and why

Xander Schauffele what’s in the bag accurate as of the PGA Championship. Driver: Callaway Paradym Ai Smoke Triple Diamond (10.5...

Cam Smith what’s in the bag accurate as of the PGA Championship. More photos from the event here. Driver: Titleist...

Patrick Reed what’s in the bag accurate as of the PGA Championship. More photos from the event here. Driver: Ping...

Club Junkie WITB, league night week 5: Another L.A.B. putter arises

We will be one quarter of the way through Thursday night men’s league season after this week. BK played much...

Brandel Chamblee says this is the primary reason why Rory McIlroy hasn’t won a major in 10 years

Report: LIV star turns down PGA Championship invite due to ‘personal commitments’

Tiger Woods WITB 2024 (May)

Gary Player claims this is what ‘completely ruined’ Tiger Woods’ career

Details on Justin Thomas’ driver switch at the Wells Fargo Championship

Team McIlowry (Rory McIlroy, Shane Lowry) winning WITBs: 2024 Zurich Classic

Keegan Bradley WITB 2024 (May)

Golf fans left surprised by LIV’s choice of course for its 2024 individual championship event

TaylorMade Burner 2.0 Iron Specs and Review: Unleash Your Game with Performance and Precision

The TaylorMade Burner 2.0 Irons feature a multi-material construction with a cavity back design, offering high forgiveness and good distance. With perimeter weighting and Inverted Cone Technology, these irons deliver consistent ball speed and playability. They are suitable for golfers of various skill levels and provide a balanced performance on the course. Overall, the Burner 2.0 Irons offer a reliable and enjoyable experience for golfers seeking forgiveness and distance.

The TaylorMade Burner 2.0 Irons have garnered attention among golfers for their impressive performance and innovative design. In this article, we will explore the key features and specifications of the Burner 2.0 Irons, providing a comprehensive review to help you decide about your next set of irons.

Taylormade burner 2.0 irons review; all you need to know.

Design and Construction

The TaylorMade Burner 2.0 Irons boast a thoughtfully crafted design and construction, enhancing both performance and feel.

Clubhead Design and Material

The clubheads of the Burner 2.0 Irons feature a multi-material construction, utilizing a combination of steel and other lightweight materials. This strategic blend optimizes forgiveness and allows for precise weight distribution.

Perimeter Weighting Technology

The incorporation of perimeter weighting technology in the Burner 2.0 Irons increases the moment of inertia (MOI), resulting in greater forgiveness on off-center hits. This technology ensures that you can still achieve respectable distance and accuracy even on mishits.

Inverted Cone Technology

TaylorMade’s patented Inverted Cone Technology further enhances the performance of the Burner 2.0 Irons. It expands the sweet spot, allowing for consistent ball speed and distance, even on shots struck away from the center of the clubface.

Iron Specifications

Understanding the specifications of the Burner 2.0 Irons is essential for optimizing their performance to suit your game.

Here’s a table outlining the specifications of the TaylorMade Burner 2.0 Irons:

Note: These specifications are based on the standard configuration and may vary depending on custom options and individual preferences. It’s important to consult with a professional club fitter to determine the best fit for your game.

Depending on availability and personal preferences, the shaft options may include additional choices such as regular flex, stiff flex, or custom shafts.

Loft and Lie Angle

The Burner 2.0 Irons are available in various loft options, providing versatility for golfers of different skill levels and swing speeds. The lie angle can also be customized to match your individual swing characteristics.

Shaft Options

TaylorMade offers a range of shaft options to cater to different player preferences and swing profiles. Whether you prefer a steel or graphite shaft, there are choices available to suit your needs.

Length and Swing Weight

The Burner 2.0 Irons come in standard lengths, but customization options are available to ensure a proper fit. Additionally, the swing weight can be adjusted to provide the desired feel and balance during your swing.

Performance and Playability

The Burner 2.0 Irons excel in delivering impressive performance on the course, combining forgiveness, distance, and playability.

Forgiveness and Distance

With their perimeter weighting and Inverted Cone Technology, the Burner 2.0 Irons offer exceptional forgiveness on mis-hits. This forgiveness, coupled with their ability to generate impressive ball speed, results in impressive distance, even on off-center strikes.

Control and Accuracy

Despite their forgiving nature, the Burner 2.0 Irons provide a level of control and accuracy that is appreciated by golfers. The consistent ball flight and predictable shot dispersion allowgolfers to confidently shape their shots and target specific landing areas.

Playability for Different Skill Levels

The Burner 2.0 Irons are designed to cater to a wide range of skill levels. While they are forgiving enough for high handicappers, they also offer the playability and performance that skilled golfers seek. This versatility makes them a suitable choice for both beginners looking to improve their game and experienced players aiming to take their performance to the next level.

User Reviews and Feedback

To provide a well-rounded assessment of the Burner 2.0 Irons, let’s delve into user reviews and feedback from golfers who have experienced these irons firsthand.

Pros and Cons

Many golfers praise the Burner 2.0 Irons for their forgiveness, distance, and overall playability. The combination of technology and design features has received accolades for delivering impressive results. However, some users note that the clubs may feel slightly bulky at first, requiring a short adjustment period.

Overall Performance and Feel

Golfers consistently report that the Burner 2.0 Irons live up to their reputation as high-performing clubs. They provide the desired distance, forgiveness, and control, allowing players to elevate their game and enjoy a satisfying experience on the course. The feel of the irons at impact is often described as solid and responsive, instilling confidence in the golfer’s swing.

TaylorMade burner 2.0 irons vs Rocketbladez

Here’s a comparison table outlining the key features and specifications of the TaylorMade Burner 2.0 Irons and the TaylorMade Rocketbladez Irons:

The TaylorMade Burner 2.0 Irons and the TaylorMade Rocketbladez Irons are both popular choices among golfers seeking performance and playability. Here’s a brief description of each iron model:

Both iron models incorporate modern technologies and design features to enhance playability and deliver impressive results on the golf course. When choosing between the Burner 2.0 Irons and the Rocketbladez Irons, it’s important to consider personal preferences, swing characteristics, and the specific features that align with your game. It’s recommended to test both models and consult with a professional club fitter to determine the best fit for your individual needs and preferences.

Taylormade Burner 2.0 iron vs M2 irons

Here’s a comparison table outlining the key features and specifications of the TaylorMade Burner 2.0 Irons and the TaylorMade M2 Irons:

The M2 Irons also utilize a multi-material construction with a cavity back design. They incorporate TaylorMade’s Speed Pocket technology, which enhances face flex for excellent distance and ball speed. The M2 Irons provide high forgiveness, very good control, and playability. They are designed to deliver consistent performance and cater to the needs of golfers at different skill levels.

Both the Burner 2.0 Irons and the M2 Irons share similarities in terms of construction, forgiveness, and distance. However, the M2 Irons are known for their outstanding distance and ball speed, thanks to the innovative Speed Pocket technology. The Burner 2.0 Irons offer a balance of forgiveness and playability, making them a versatile choice for a wide range of golfers.

When choosing between the Burner 2.0 Irons and the M2 Irons, it’s essential to consider your individual preferences, swing characteristics, and the specific features that align with your game. Testing both models and consulting with a professional club fitter will help determine the best fit for your needs and ensure an enjoyable and rewarding golfing experience.

Ping G425 Vs TaylorMade Sim 2 Irons; A Comparison By A Pro Golfer sporticmedia.com

The TaylorMade Burner 2.0 Irons offer golfers a well-rounded package of performance, forgiveness, and playability. With their advanced technology, thoughtful design, and customizable options, these irons have garnered a positive reputation among players of various skill levels. By understanding the specifications and performance features of the Burner 2.0 Irons, you can make an informed decision and potentially enhance your game. Remember to consult with a professional club fitter or golf instructor to ensure the best fit for your swing. Elevate your golf experience and unleash your game with the TaylorMade Burner 2.0 Irons.

Discover the meticulous and expert-driven process behind our product reviews at Sportic Media. Our comprehensive guide, led by industry veterans, ensures you get the most reliable and detailed insights into golf equipment. Dive into our methodical approach by visiting How We Test Products at Sportic Media: A Comprehensive Guide .

Willie Park is a golf writer and content manager at Sportic Media. He covers all aspects of the golf world, from tournament recaps to player profiles to equipment reviews. Willie brings years of experience in the golf industry to his writing, along with a passion for the game and its history. As content manager, Willie oversees Sportic Media's golf coverage, working with writers and editors to produce engaging and informative articles for golf fans everywhere. His mission is to share his love of the game through Sportic Media's high-quality golf journalism.

Comparison of Dynamic Gold S400 Vs. X100 By Sportic Media

What is my personal experience with S400 vs X100? Because X100 kept my flight in the short irons low, I liked them. Although I’m not sure if I still have their back for them, that is a different story. However, I preferred X100 in the short irons more than the long irons (4i, 3i…not that…

The Best 40 Gram Driver Shafts for Optimal Performance

The quest for the perfect golf swing hinges on an array of factors, and the driver shaft you wield can make a substantial impact. Among the diverse weight classes available, the 40 gram driver shaft category stands out for its versatility and potential to enhance your performance. In this guide, we delve into the realm…

Heavenwood Vs 7 Wood: Which is the Best For Playing Golf?

When it comes to playing golf, choosing the right club can make a significant difference in your performance on the course. The decision between a Heavenwood and a 7 Wood can be challenging among the various clubs in a golfer’s bag. In this article, we will delve into these two clubs’ characteristics, advantages, and potential…

Fujikura Ventus Swing Speed Chart: All You Need To Know

For golfers seeking an edge on the course, the Fujikura Ventus Swing Speed Chart is a critical tool. This guide explores how to leverage this chart to optimize your golf shaft selection. Discover how your swing speed impacts your choice of Ventus shaft flex and unlock the potential for longer, more accurate shots. Whether you’re…

Titleist 913 D2 Driver Adjustment Chart: Mastering Your Ball Flight

The Titleist 913 D2 driver is a versatile club that allows golfers to fine-tune their performance on the course. One of its key features is the SureFit sleeve, which enables adjustments to the loft, lie, and direction. This article will delve into the details of the Titleist 913 D2 driver adjustment chart and explore how…

Are PXG Clubs Good for High Handicappers? A Pro Golfer’s Guide

PXG, renowned for their premium golf clubs, has captured the attention of both professional and amateur golfers. But are PXG clubs a wise choice for high handicappers seeking to elevate their game? This article delves into the merits and considerations surrounding PXG clubs for those navigating the golfing journey with higher handicaps. What is a…

Pin It on Pinterest

TaylorMade Tour Burner Driver Review: Specs, Pros and Cons

Released in 2008, TaylorMade’s Tour Burner Driver was for the players who loved to bomb it on the golf course. The club led an era of improved club technology from TaylorMade. At the time pro golfers like Sergio Garcia, Charles Howell III and Justin Rose put the Burner in play.

Tour Burner Driver Specs

Made for advanced players, the TaylorMade's new Tour Burner driver features a 450cc titanium head. It is streamlined with a steel dual crown and unique perimeter weighting.

TaylorMade equipped the Tour Burner with a TaylorMade RE-AX, 60g graphite shaft available in regular, stiff and extra stiff flex. Custom shafts by Aldila, Fujikara, Mitsubishi and Matrix HD are also available.

TaylorMade Tour Burner Driver Review

With the stock RE-AX a slightly tip-stiff shaft, the Tour Burner's aerodynamic head rips through the ball with ease. It's low- to mid-kick point characteristics and slight draw-bias make it fun to really let go off the tee. It's a comfortable player's club with a significant amount of game-improvement tendencies.

The driver's Dual Crown features a small thin top with a large weighted power-base. TaylorMade incorporated its Inverted Cone Technology which helps players produce faster swing speeds and ball speeds.

TaylorMade made sure this driver had ample forgiveness across the face and engineered it to produce a lower trajectory. The club is designed to provide more consistency than the Burner driver before it.

Who Should Play the Tour Burner Driver?

The Tour Burner is a bit draw-biased, which means a shot-shaping player could get into trouble on fast, steep swings. The club performs best with controlled and powerful tendencies. With a D5 swing weight, the Tour Burner may check in slightly lighter than some big hitters prefer. If you’re a player who knows how to control the club face, the Tour Burner could help you find the added consistency every golfer pursues.

Tour Burner Driver Value

According to the PGA Value Guide, TaylorMade’s Tour Burner Driver, resale value isn’t very high, ranging between $40 and $53. Brand new the driver listed at $699.

Where to Buy Tour Burner Driver

Players who want to try out the Tour Burner drivers can find them on sites like eBay and 2ndswing.com where they can buy them for around 100 bucks. On eBay , they range from $40, $50, and for the most part are under $100.

Bottom Line

The TaylorMade Tour Burner is a true premium driver meant for shot-shapers and low handicappers. It is also a solid club off the rack for novice golfers looking to grow into a tool with pro-level characteristics.

Image: Ross Kinnaird/Getty Images Sport via Getty Images

The Sand Trap

Golf News, Reviews, and Commentary

TaylorMade Burner XD Irons Review

Burning for distance?

Share this with your golf buddies:

Click to email a link to a friend (Opens in new window)
Click to share on Twitter (Opens in new window)
Click to share on Facebook (Opens in new window)

TaylorMade may just be the hottest brand in golf. Over the past few years, a ton of r7 drivers (followed by r7 fairway woods and, to a lesser extent, r7 irons) have found their ways into a host of pro bags, and subsequently into the bags of amateurs of all abilities with varying results. The new kid in the TaylorMade family is the Burner line. Released (or re-released) only a year ago, the Burner driver and fairway woods have been played on the Tour by players like Kenny Perry, Sergio Garcia, and Sean O’Hair, and has been well received by the masses, as well. Where the r7 line is most associated with movable weights, the Burner line hangs its hat on hot clubfaces and technology that increases clubhead speed. Now, the Burner line has brought that same technology to the irons arena. TaylorMade has packed a lot of that technology into the Burner XD irons. The company calls the Burner XD “The Only Iron with Burner Speed, Burner Power, and Burner Distance.” What’s not to like about speed, power, and distance?

When it comes to irons, distance can be over-rated. Sure it’s fun to hit a green on a 155-yard par 3, turn to your golfing buddies, and announce “pitching wedge.” But distance is only useful if it’s repeatable (and in the right direction). That’s the challenge that any iron design faces… at least usually.

The reincarnated Burner line is about distance first and foremost, and the Burner XDs are the first irons in the line. Naturally, I’m thinking they are designed to hit the ball far. Let’s see if I’m right.

Design and Technology “Super” is a description that is near and dear to the Burner marketing folks. The Burner XD irons feature “Supersized” clubheads and “SuperFast Technology.” The first helps make them forgiving and the second is all about distance.

The XD clubheads are built on a 17-4 stainless steel frame, but have a thin titanium face (read “high CoR”), intended to promote ball speed and thus add distance. Titanium also happens to be lighter than steel, and some of the weight saved by using titanium has been redistributed low and deep in the clubhead to help launch the ball higher. I say some, because these clubs play to a D0 swingweight even with their lightweight shafts (compare to the D2 swingweight featured in the Cleveland CG Reds). In reality, few people would notice the difference between those two swing weights. And for most people, the lightweight of the clubs would, indeed, increase swing speed.

TaylorMade’s Inverted Cone Technology, borrowed from their extremely successful line of woods, is in plain view on the backside of the clubface. ICT is intended to expand the sweetspot and (big surprise!) deliver high ball speed.

TaylorMade’s SuperFast Technology extends to the shafts. Our demo featured the 90 gram RE*AX SuperFast Steel 90. It’s a stepped shaft, with the steps occurring more densely nearer the clubhead and then with increasing distance between them toward the grip end. The last step comes two or three below the grip. The steps appear to grow shallower as they get closer to the grip, though this could be an optical illusion. By comparison, the steps on the Dynamic Gold S300 begin roughly a half inch farther from the clubhead and occur at regular spacing and depth nearly all the way to the grip. These steps theoretically should result in a mid to high kickpoint on the shaft which could result in a teeny bit more clubhead speed.

The Burner XD irons fall right between the r7 Draw and the r7 CGB Max irons at the high-forgiveness end of the TaylorMade line.

The 17-4 stainless steel clubhead and titanium clubface are joined using a method called “lip encasement,” a process that mechanically unites the two dissimilar materials.

Esthetics In a day and age when many manufacturers tend to give their irons (and their game improvement irons especially) the full floozie treatment, the Burner XD sports an almost restrained look.

Don’t get me wrong, a traditionalist is going to find these a bit gauche . There’s a Burner XD badge just above the sole on the back of the clubface, TaylorMade’s “Sound Managing Cavity Badge” fills the cavity back, and the Inverted Cone Technology is framed in red in the middle of the cavity. But it could be much worse. Even with the 3-iron, you do not see any of these markings at address. The only thing you might notice is the “Ti” stamp on the upper toe of the clubface, there to reassure you that the face is made of titanium.

One negative about that titanium face, it won’t stay pristine looking for long. Hit a bucket of range balls at a sandy range, and you’ll have lots of dark looking scuffs and scratches on the clubface (hopefully, mostly in the middle). Stainless steel faces will also scratch and ding over time, of course, but on titanium the marks are darker and much more noticeable. The set we demoed quickly marked up with normal use.

Like the r7 CGB Max, these irons are big. They aren’t just oversized. They are Supersized. They feature a thick topline like almost all game-improvement irons, as well as a large offset. The soles are advertised as medium width, but they appear fairly wide to me. Still, though I prefer a thinner topline, less offset and a smaller club overall, I quickly adjusted to the look of the Burner XDs (with the exceptions of the three- and four-iron).

The longest Burner XDs just have so much offset that I couldn’t get used to the. At address, the three-iron looks a little like a stylized “S” at the end of the shaft. That’s too much for my taste, but a proven design for those looking for a little more help from the club.

Performance Here’s the thing… I did not love these clubs. None of my friends loved these clubs. Everyone felt they were “OK.” That said, these irons do exactly what they are designed to do. If distance is job one for TaylorMade Burners, these clubs get it done. How they get it done, as we’ll see, is debatable.

Suffice it to say, I was consistently hitting these irons what I’d call “summer distance,” though almost all of my rounds with these were in cooler temperatures. I felt pretty safe playing these to go five to 10 yards farther than a good shot with my irons.

As I mentioned earlier, I never got comfortable with the look of the long irons, but I also couldn’t get them up in the air very well. I’ve always been a low ball hitter, but I found these long irons to be harder to hit than I would have expected from a game improvement long iron. I hit bullet after bullet that flew dead at the target, but just didn’t get up in the air enough. When I hit the Burner three-iron side by side with a Cleveland TA5 and a Mizuno MP-60, each of those clubs launched the ball higher and had more carry distance for me. Part of it might have been the somewhat unusual shaft in these, but more likely it was the fact that the Burner three-iron is actually more of a two-iron, the four a three, and so on.

Indeed, one of the ways that TaylorMade has ensured that these clubs are long is by strengthening the lofts. In fact, the Burner XDs are among the strongest lofted irons out there. The three-iron is 19°, compared with the typical 21°. And this is on top of the already stronger typical lofts of modern clubs. Compared to a 1970s three-iron , the Burner XD three-iron is in effect a one-iron.

Unfortunately, that means when you tell your buddies that you hit a pitching wedge into that par three from 155, you actually hit a nine-iron (of course, that’s still not too shabby).

But distance is never the end of the story in golf. TaylorMade also claims that the Burner XD irons provide “Maximum Forgiveness.” You’d think that would put these irons as far out on the forgiveness scale as possible, but in TaylorMade’s world, the “Extreme Forgiveness” of the r7 CGB Max is more forgiving than the XDs’ Maximum Forgiveness.

Still, as it turns out, Maximum Forgiveness is pretty darn forgiving (I wonder if you even know you hit a ball with an Extreme Forgiveness club). You can hit, or mishit, the XDs pretty much all over the clubface and still get decent results in distance (and acceptably close in line). That’s a very good thing for higher handicappers who struggle to consistently hit the middle of the clubface. In my last round with these clubs, on a 195 yard par 3, I hit a five-iron well out toward the toe and still hit the green (granted, I had a 50-foot putt that I three-jacked, but the XDs did their job). Don’t get me wrong, these clubs are not magic. I still hit plenty of bad shots with them (like a sliced four-iron that ended up in a pond when I tried to fade a ball into the wind). Magic, no; forgiving, yes.

The drawback to forgiveness is that it makes it difficult to tell where on the clubface you’re making contact and it makes it difficult to work the ball. Anything around the center of the clubface gives what I can only describe as an “OK” feeling. It’s nothing like the buttery feeling of a good forged iron. It’s just not all that solid, but it’s also not as hollow feeling as some clubs in the game-improvement category. Impact is definietly muted with the Burner XDs, but you can still usually tell where the ball met the clubface.

While it is possible to work the ball with these clubs, that’s not really what they want to do. For the most part, if the clubface is square at impact, the ball is going to go somewhere very close to straight. If you like to work the ball, you’ll want to look elsewhere.

Specifications The Burner XD Irons are available in 3 through 9, pitching wedge, attack wedge, sand wedge and lob wedge. Also available for lefties (except for the lob wedge). You may just need all four wedges (and maybe another) in the bag when your nine-iron has 39 degrees of loft.

You can purchase various set configurations (5-PW, AW, SW; 3-PW; etc.) for the base set price of $899 in steel or $1099 in graphite.

The Burner XD irons are available with the 65 gram RE*AX Superfast 65, or the 90 gram RE*AX Superfast Steel 90.

Overall After several rounds and a session at the range, I believe these clubs are an appropriate choice for golfers who simply want to enjoy the game and don’t want to put in too much practice time. Simply stated, the Burner XD irons provide decent results and exceptional distance with reasonable swings.

The Burner XDs are aimed at mid to high handicappers with swing speeds ranging from 70-105 mph. At $900-$1100 a set, they run into competition with their own siblings, with the r7 CGB MAX irons priced just above them and the r7 irons just below them. Those who really want forgiveness, might want to go for the CGB MAX, while those looking for something more toward the player end of the spectrum, might want to go or the r7 irons. It’s really just a question of how much you want to spend. TaylorMade fans have plenty of options.

The Burner emphasis on distance will probably play well with a certain segment of the golfing public, but others will find the delofting of the irons to be counterproductive to their games. Most golfers choosing to play these clubs would be best served by skipping the three-iron and starting the set with the four- or five-iron, which have the same lofts as most three- and four-irons. As it is, the Burner XDs are probably would work best for someone with a swing speed of 70-90, so the SuperFast technology could help the increase that speed.

All in all, the Burner XDs do what they are supposed to do. They launch the ball on a mid to high trajectory, and they are pretty long as irons go. But really the best thing about the Burner irons is that you can make less than stellar contact all day long, and it won’t hurt you too badly. If these had a more solid feel to them, they’d probably sell a ton of them.

61 thoughts on “TaylorMade Burner XD Irons Review”

Nice review. Very happy I went with the Raptures instead. 😆

The concept of a 39-degree 9-iron reminds me of the joke from “There’s Something About Mary” where the guy says he’s going to beat “Eight Minute Abs” by producing “Seven Minute Abs.” …Except that in the movie it was a joke.

Lowering the loft. Another cheap, used-car-salesman trick. Sure you can hit the 3-iron farther, because it is actually a 2-iron that they have put a 3 on.

There’s a reason nobody uses a 2 iron, they are nearly impossible to hit. What’s happens when he finds he can’t hit his 3 iron? Dump it and buy a hybrid?

What about the other end. Isn’t this also going to produce a gap between his numbered clubs and his wedges? So now he’s got to buy another gap wedge. ARGGG!!!!

Most players would be better served using higher lofted irons, and replacing their longer irons with hybrids. Even for players that prefer long irons, I don’t see any advantage to lowering the loft. If they wanted to be using 1 or 2 irons, they’d buy them. Why foist them upon unsuspecting golfers by stamping a 3 on the bottom.

Thanks, but no thanks.

I had the older R7 XD line in my bag for one season and ended up getting rid of them due to many of the same issues you mention. The irons were dialed in for high and straight shots, which hampered my shot making ability. My iron game got sloppy due to the forgiveness factor. I hate the way the faces got dinged up. And the stronger lofts wreaked havoc with my short game.

There are too many good iron options out there to struggle that much with the most used clubs in your bag. I went back to Ping.

For windy city, you do realize that Ping has gone through the same process, there is a reason they sold sets of 3 or 4 thru 10 iron instead of 9 (along with Calloway). Every manufacturrer out there has messed with the loft, especially in the last 10 years or so. Ping, TaylorMade, Calloway, it doesn’t matter. Creates a nice little secondary nitch with the wedges, you need 4 or 5 to cover everything nowdays, especially if you were already a long hitter.

It doesn’t matter if you have stronger lofts as long as you get the same launch angle as the more traditional lofted clubs. I have a set of Burner XD irons. I am launching the ball the same if not a little higher than before AND getting better distance.

I am using a set of callaway VFT irons. Any real advantages to chg to this iron or even the rapture? Thanks for any comments. Cheers.

I can’t imagine an Iron that plays better than the OS-2’s. And that includes ping, which I played for 22 years. TM’s problem is that they have created the finest clubs on the market and rather than stand pat and cruise for a season, the market forces them to create “new and improved” model. By the way, the burner tp driver is amazing……………..

I have just picked up my set of BURNER XD’s and am well pleased with them. The look is awesome the club head looks great behind the ball the design of the shaft great and the grips feel great. So what if they have messed around with the lofts I have picked up a set 4/SW. I have tried them out today on the range and am getting great launch angles and good distance about 175yrd with my 6 iron thats is comparable with my old set if maybe a little longer. I am sure they wont suit all golfers and maybe the lower handicaps out there will suffer a bit from the forgivness not letting them shape their shots but for us mortals in the world they will help us out no end the ability to hit a good flighted straight shot will make them a real hit with the mid to higher handicaps. I think it is also important to remember that any view left here is just that persons opinion so rather than belive us all go out and try one of these clubs on a range make upyour own mind.

We are fortunate to have a great local golf retailer (Fiddler’s Green in Eugene, OR) that also has a driving range. They allow you to test clubs almost endlessly while choosing.

Over the course of several weeks, I tested Pings, Callaways, Nikes, Titleists and Taylormade, and had reduced the “finalists” down to the Callaway X-20s, and the Taylormade R7s. And then…the Burners arrived–

It took me about an hour of comparing all three, side by side, to decide on the Burner XDs. The difference between clubs was obvious.

As a newly addicted golfer (first year with over 150 rounds played) with a 17.6 handicap, I love both the forgiveness of the these clubs, as well as the distance and launch. I constistently hit 10-15 yards longer with each club, but agree with the assessment that the longer irons are too delofted. I opted for a 5-SW set and I added the AW and a Titleist 60 degree, and use hybrid 2 & 4 to compliment the set. I also use a Burner Driver…it was my first Taylormade club, and one of the reasons I became a fan.

It may be the new clubs, or it may be the confidence I have swinging them, but since playing my new XDs, I have consistently shot 5-7 strokes lower than my usual scores. They look great, they play great, and I am extremely happy with my choice.

My brother-in-law ended up buying these because he hit the 5 iron 20 yards farther than with the other 5 irons he tested. I showed him the loft specs on TM’s website, and yeah, now he’s looking for more wedges. 🙄

❗ Nice feel, good swing speed, best off real grass not crap we have here in Oregon (mats), improved stick on greens, very forgiving in all, took 5-7 shots off my first round with these. Ya ya played highschool team and now 2-3 times a month. By the way i’m 41, 6′ medium build. Can’t go wrong with these.

Been chasing the ball for over 30 years and one thing is for sure with the Burner XD’s, I’m enjoying the game more now than ever. I had my first 72 (par) ever and most of it had to do with the forgiveness offered by these clubs. They are pricey but for me (8 handicap), they were well worth it. Obviously there’s more to the game than your irons and having them in your bag doesn’t guarantee anything, but overall improvement (5-7 strokes) has been my reward. Can’t wait for my next visit to the green family. 🙂

Who cares if TM has messed with the lofts. All the manufactures have and are!! The technology has pretty much reached a plateau for now so the only thing currently left to do is jack with lofts and increase the length of the driver to increase clubhead speed – everything else is maxed out (by the way – I love my Burner Driver – especially after I cut it down to 44″ and regained control of it without losing distance). For me the bottom line is this – I have a handicap index of 5.3 – I cannot work the ball right to left, my natural shot is fairly straight with a little cut – why do i want or need forged irons where I can feel ALL my bad shots and cannot get the optiminum performance out of them anyway??? I would rather play with “Maximum Forgiveness” irons (I own XD’s) and on my bad shots not feel it so much BUT only lose 5-8 yards on a mishit off the toe and still have a nice shot of getting up and down. I don’t need a set of forged cut muscle backs to feel like a golfer – I’ll take my Game Improvement Irons, look like a Hacker, shoot 77-82 and go on about enjoying the rest of my weekend. Short story long – The XD’s are a great iron – if you want to taslk about feedback – I’m glad they are so forgiving that you have a hard time discerning good shots from bad shots – If I felt every bad shot, my confidence would drop and the beautiful game of golf would’t be as much fun.

People are always saying that these irons don’t allow you to draw or fade the ball as well and give you less control.

Dont’t believe them, besides getting better sitance i can draw the ball twice as good aas before.

Also with my old nike nds irons i could hit an 8 iron 135 yards with these new tm burners i can hit it 150. 1 or 2 degrees doesn’t have that much effect. THESE IRONS ARE GREAT.

goooooood clubs verrry good!

No wonder I found it so hard to hit my 4 iron. I bought a 3 hybrid to finally complete my set just to find out that my my four Iron has the same loft as my 3 Hybrid, a Nike Sumo SQ2.

That is just ridiculous, claiming that these clubs are about 10 yards longer. Well, yeah, anyone can achieve that my going one one club longer. Its amazing to see how the loft in these irons are exactly the same as a longer club in their R7 TP Irons, TP MB Smokes, and the new Tour Preferred Irons, and to some extent the regular R7’s too. Other than that, the Burner Series and the CGB Max’s all have the loft of a longer club then the one stamped on the set.

I wrote TaylorMade complaining about this cheap way of claiming distance. Its not about the technology incorporated in the club but the loft on the irons.

I have this set, have been using them for about a month and half and do notice they go longer but notice they are harder to hit as I go to longer clubs.

For an $1100 set of clubs (I have Graphite) I would have expected a more honest reason for their claims in these clubs. Sure they are forgiving, but obviously you wont lose as much yardage when you are hitting a longer club’s loft in these clubs!

By the way, golf instructors will tell you that you should use longer clubs because many are afraid of hitting too long but in most cases, a longer club that is not being over powered will give you a better shot than a shorter club being over powered.

Maybe that is why many drop strokes using these clubs. It could be because of the forgiveness but it is also because these are configured as a longer club then stamped and when you hit it with the right amount of strength or less you will still get a very decent shot.

Just go ahead and hit your longer clubs with less power and more control and you will be hitting better shots.

I tried these out – but I knew about the changed lofts – so I used my 5 iron (and other brands 5 irons) against the XD 6 iron. Results spoke for themself. 5-8 yards more with the xd – Purchased a set 4-SW and kept my old wedges. IT IS GREAT to hit 158 with a 9 iron when your playing partner uses and 8 or even a 7. Nice clubs – individual choice – as with all golf gear.

Great review and accurate is terms of who these irons are aimed at. I’m a mid-high handicap (18) who played two round with these clubs (rentals in Hawaii at Mauna Lani..oh yeah) and shot 91 on North course and 84 on the South course from the mid tees. Great feel and forgiveness which is what a mid-high handicapper like me likes to see. I’m looking online for a set as we speak!

Just a note on the burner irons for ladies. My wife is a 10 handicap that has struggled with distance and has beaten herself up trying to get 150 yards out of a 6 iron. Finally the burners arrived with the senior graphite shafts and the distance increase of 10 yards a club was immediatly noticed. I have noticed the graphits are about 1/2″ longwer which problably assisted with the lenth. she is most pleased and is enjoying the game more than ever. As with all clubs make sure you have the correct shaft for your swing speed.

I moved from TM 200’s to OS2s and then on to Burner XD’s. It wasn’t until I read these comments that I realized why I can’t work the ball as well. Duh.

Of the 3 sets, these seem to stand out as most playable. I am a 10 hcp, play a LOT, and enjoy challenging shots. These do not seem to be meant for that although I have pulled off some awesome ones now and then. Cutting works far better than drawing.

Now that I’ve read these, I might look at the r7’s.

I have played mizunos (cavity back) for the better part of 5 yrs and grew tired of mishits falling short and wayward–I paired the XD with Rifle 5.5 shafts and presto!! control & distance, even on the mishits. I’m not really concerned with the extra distance garnered from the strong head loft angle… I do appreciate the consitency gained with the (shaft) engine. Has anyone else found this combination helpful?? 😆

😆 Hello Everybody… I got this clubs Set on December 2008 for Christmas and they changed my life.Playing With them in 2 months I got lower my handicap from 32 to 21.

Greats clubs, But my only doubt is why taylormade release just these series jut on 2008.

They might continue selling this kind of clubs, Good Distance and Great forgiveness .

I hit these clubs at the driving range and they felt great. After reading all these reviews no one seemed to mention anything about the club faces getting lots of ball marks on them ???? I am looking for a new set of clubs and these are at the top of my list. The only thing holding me back from buying them is, that I dont want to buy these clubs if in 2 years there faces look like they are 10 years old. Can anyone who has these let me know how the faces are holding up??????

After reading all these reviews no one seemed to mention anything about the club faces getting lots of ball marks on them ????

I think you missed this paragraph:

One negative about that titanium face, it won’t stay pristine looking for long. Hit a bucket of range balls at a sandy range, and you’ll have lots of dark looking scuffs and scratches on the clubface (hopefully, mostly in the middle). Stainless steel faces will also scratch and ding over time, of course, but on titanium the marks are darker and much more noticeable. The set we demoed quickly quickly marked up with normal use.

By the way, the marks won’t affect play at all. But if you want a set that looks brand new for a long time, titanium-faced irons are probably not a great choice.

Ya, I saw in the main review club face marks were comented on but no one else seemed to say anything about it in the individual reviews. I just wanted to hear what people who owned the clubs had to say about it. I live in vancouver and most of our driving ranges are turf matts. So is it the sand that effects them or the ball. I just really liked the feel of these clubs and now that I have read about them getting all marked up, I am having a hard time deciding if it is worth me buying them. Thanks

Everyone should know that if you are going to use a titanium face or strengthen the COR you are going to add height,therefor you have to stregthen the lofts.Otherwise people will complain that they are catapulting there shots a mile in the air,with less distance.I can’t figure the complaints about working the ball.I guess because I learned how to work the ball with Improvement Clubs,so maybe it’s more natural for me.I never heard so many people complain about hitting a 9 irons 155.These clubs are great,I got mine on line for $599,4-AW,graphite.I think the 09 s are more gimmicky with there differnet PODS.Who wants an iron set that has 3 different clubs looks and sizes throughout their entire set.Not longer than The HD’s.

I was contemplating getting a set; My driver SS about 94/95 – 5/6 iron SS 87/88. Some of my clubs have stiff, firm & reg flex. Any suggestions which shaft might be the most suitable in graphite? When I use a softer shaft, it tends to fade a bit more & lose a few yards, especially in the wind. Thanks, Mikey

The first time i tried these clubs was down a driving range along with a couple of others as i was looking for a set of new irons and straight away the taylor made burner xds stood out above the rest the distance and feel of the ball was amazing i was hitting 175 with a 7 iron and straight way i ordered a set of these clubs and i am so pleased that i chose to do so -WORTH THE MONEY !!

Hi i have read all the reviews on here, i bough the xd’s yesterday and i am more than a little excited to get out and try them. I’ve been playing less than a year and hit around the 100 mark so i’m hoping the xd’s are going to improve my game.

Hey, i’m considering buying these clubs… the only thing i’m worried about is that i’m only about 5’8″……. will these clubs be too long for me??? Any suggestions??? Thanks.

I wouldn’t concern yourself too much with the length.But it is a personal issue when it comes to golf clubs.The length gives you more of a swinging sensation,you will feel the club head more.I would have to say that if you are a one plane swinger you may want to try them out first.I feel they are also suited in the standard lie for a plane that is upright or above the rear shoulder.If you are a 2 planer like I am at 5’9 I would recommend these clubs.By the way you can’t get too hung up on the stronger angles because every manufacturer is doing this.With club heads and shafts designed to hit higher you have to stregthen the angle of the head or they would go way to high.My 8 was carrying 155 and a mile in the air,if the loft was typical it would have been useless in the wind and not carry as well do to it’s initial launch.Lastly these clubs are workable.I could change to trajectory with the same club very easy and curve it either way.Ultimately you have to try them and get fitted.Dont’ pay more than $599.00 for 4-AW.

I’m a 13 year old from California and I am going through a fase where I am growing out of my child set and now having to choose an adult set. I recently purchased a 2009 Burner driver and a 2008 Burner 5-wood and had them both cut down 1 1/2 inches due to my not-so-intimidating stature. (5 foot 1) I completely fell in love with both clubs and I always have confidence hitting them. This change has caused me to fall in love with TaylorMade.

I still use my child set 5,7,and 9 irons and they are very small and have too much bend in them. When I hit an iron good, they sure fly, but always tail at the end, which I cannot control.

My father understands that I need new irons and is willing to purchase almost anything that will give me confidence. I swung these clubs with a senior graphite shaft and they were my preference of the under 600$ iron sets I found. I have been recommended to find a ladies set and I have hit some balls with them, but please, I don’t want any cute, girly clubs…. 😛

I am almost sure that I would like these clubs, but I have a few second thoughts:

At 13 I need accuracy more than “whopping” distance.

I like a smooth and fluid shot that travels straight.

I would only use a 5 iron as the longest iron, and I’m looking at a 4-PW at very cheap on eBay.

Can anyone help me out??? Are there any other men’s graphite irons that would fit me better?? 😀

Thanks a lot.

First thing you need to do is get fitted for clubs.At your age where you may not have decided what type of swing you may prefer,single plane,two plane,TGM oriented,ETC,you will want to have a pro look at what your doing.I was fitted by Ping a few years back and I got 3 different lie angles depending on whether I was swinging upright or flat, one plane or two.I did this on purpose to see if they fittef my body type or swing,it was obviuosly the swing first.Types of clubs are up to the individual.They will not make you a better golfer.I know plenty of scratch golfers who play with equipment I have never heard of,but they were all fitted.

I just hit these today on the range for the first time. they are very forgiving . Much better than the tm r7s. Im thinking about buying them but not sure. does anyone think its a good idea to buy them?

There great clubs,but as always take atrip to your local club and try others.clubs are very individual.Also make sure you don’t pay more that $599.00 4-AW,graphite.They are trying very hard to sell these because TM for what ever reason has to change all there clubs no matter how good they are,every year.

I got mine 4-PW graphite senior shaft for 260$ lightly used. :smile:SUPER steal..

i just bought mine yesterday after player Cobra s9 for about 2 yrs and indeed and picked burner xd irons over and above titleist because they look somewhat blade like and sharper at the toe for divot and a good ball lift .I am not convinced yet whether to say these are actually blade irons with cavity back but will need some information and education

I don’t believe I have ever seen where anyone has claimned that the XD’s are blades with cavity backs.Not in reviews or by Taylormade.They fall directly in the categorieof game improvement clubs.

Just got the Burner Driver 10.5 re ax shaft for my birthday and couldn’t wait till the next day to go to use it. The unveiling unwrapping the plastic along with the placing of the ball was sureal almost. Taking measurement of flags and distance, thinking about the lauch, system go and,(not wanting to blow the very first drive with the new driver), the arm swing was picture perfect in my mind and SMAK, she took off and climbed right on up and kept going to my suprise, straight as she could and eventually ran out of speed and dropped down from the clouds to earth. I almost lost sight of it and saw her hit the ground. I don’t even have a handicap and if I did it would be 26 to 35 so for me, I think I am going to do okay with this club. Very forgive as written above and boy what fun it was. I consistantly hit it far, far, far away from me and other than a few and only a few coming around and a slice or two was all, you would have thought me to be a real time player. What a great thing this golf thing is to us all. Can’t wait to get out again. then I found this blog and thanks for the education everyone. Just learning and found me a very none frustrating club to move me down the field. Game on! 🙂

I just dont get everyone on here. These clubs are cast, they can be BENT.. So if anyone has an issue with the strong lofts, then just get them bent to equal what you think the lofts would be.. I am a low ball hitter and want to hit the ball higher so i read these reviews and said to myself maybe these arent the clubs for me, but then realizing that I do some clubmaking on the side all i have to do is bend the clubs a couple degrees more to add some loft and presto they equal the loft of most clubs.. Its that simple people..

I live in the UK and I am interested in buying a set of Burner XD or 2009 irons.

I have found that on U.S websites, they are much cheaper than here in the UK even after import duty and taxes. However, I am worried that the clubs may not be genuine. I have seen both sets of clubs for sale around US$ 350 -$400 (in the UK they are US$ 570 – $700+) on sites like wowgolfclubs.com and golfclubswarehouse.com. I know everything in the UK is more expensive than in the US(!) but I just want to make sure I am buying genuine clubs and not good fakes. Can anyone recommend a good discount site that sells genuine clubs? Or does anyone know about the sites above?

If I do buy them, it will mean I can’t have them fitted. Does this help alot? I do not play very often, but I intend do play 2/3 times a month in the summer.

Finally, what is the difference between the XD and 2009 irons?

Thanks for all your comments above, they have really helped me.

I would most definetely get them fitted.It,besides feeling comfortable with the set, is the most important part of buying equipment.I bought a set of the Burner XDs and I think they are a great club for the limited time I have had to play them.They are straight and long,of course you should know the lofts are stronger too.An 8 iron is like hitting your a typical 7.The company had to do this do to some of the modifications which make the ball go higher. Most importantly I would demo them with the newer Taylormade irons side by side.I got a chance to hit the Burner Plus and their a set of the irons which changes head size.They felt great to and very different.But being left handed I was limited in terms of demo clubs.For the price and promised extra distance I went with the XDs.I should have been more patient and tried the 3 models side by side,to see about the distance and feel in the others.They are all reasonably priced.But always when in doubt get fitted.

I bought TM Burner XD ( 4 – PW ) in Sep,2008. Since then I feel more confortable and my shots are more consistent. I regret not having bought the SW at that time because now being out of production it is almoast impossible to find it in ITALY.

Bought 3-9 PW SW Graphite Shaft Burners 62 deg . Very forgiving. I hit the ball at least 10% further than my old irons.

I recently picked up a set of the XD’s 4-PW and SW steel shafts for $200 (very lightly used, maybe used once on a driving range) because I thought it was a steal of a deal and they were an extreme upgrade from the Arnie Palmer axions i had been using for the past 10 years. My only concern is that the irons are the R-flex and not the S-flex like my TM drivers and since we are burried under piles of snow and wont get to golf until mid-april I did not get the chance to test them. Over the years I have tended to swing a soft iron to try and gain better control and straighter shots meaing when distance may only require a 7 I sometimes pull a 6 and swing nice and easy. My question is simply whether or not the R-flex was a bad choice for my iron swing style, and if it was a bad choice what can I do to make these clubs work? Any feedback would be great.

R Flex is not a bad choice,esp.in steel shafts.The fact that you got such a great deal will allow you to upgrade your shafts after being fitted for the correct shaft.Remember the shaft is the engine of the club. A regular shaft will help you feel the head better.When you get to the top of your swing where you are loaded(Ready to proceed downward)you will feel this loading better with R Shafts.Unless you are a low digit or scratch always play with R.

I just got a set of Burner XD for Xmas from my lovely wife. I already have a set of Ping i10, got to take my Burner and Pings out side by side and the Burner XD definitely had more distance and a better feel than the Ping i10’s. Im looking forward to trying them out on the golf course.

Are the lofts the same?I know with my old clubs,I had to compare one more club to the XD,to get accurate measures.IE:Yonex- 6,TM- 7,The 7 still out performed the 6 in distance and my shots were nearly all straight and high,great MOI.Grips are too thick but thats not a big issue.

I have played Mizino’s since High School. I am now playing Callway x-20 Tours I purchased them a few years ago when they came out. They have a rifle shaft and are stiff. I recently purchased a set of used XD’s 5-sw simply because they were a good deal 150.00. I take lessons and being from Ohio I take lessons indoors on a simulator in the winter. I purchased the 20’s due to the fact that I hit the ball with a much lower trajectory with them ( I am a high ball hitter). I recently took the XD’s to a lesson and I will say this…….I no longer own the x-20’s. I hit the x-20 6 iron about 180-185. Mind you this in on a simulator which I have found to be about 5 yards short. I used the XD 7 iron due to the loft difference and hit 30 shots. The result was amazing I had a 3 degree higher launch average with the XD and averaged 193 Yards. My swing speed is well over 100 and I am pretty long. Note the 8 handicap(still havent figured out the Driver. I just cant put it down no matter how bad I hit it. In closing I guess I can say that yes they are longer, yes they feel fine, and yes they are good clubs. .

Okay, i have been golfing now for four years with my 5th season rapidly approaching. I started out with a cheap set of john daly’s. never broke 115 my first season out. Then got the R7’s in the second season and was able to get closer to the 100’s. I now shoot with the BurnerXD’s and am consistently hitting in the 80’s with my lowest score being 82 so far. WOOOHOOOO!!! I know my distances, i kind of know my swing and I 100% know which clubs I will keep in my bag for as long as I can.

Paul Calgary, Canada 35yrs old

What swing change did you make to drop so many shots

Just got a set. Got a great deal. Still shot 95. But looked better doing it. Really I like um!

Worst set of clubs I’ve ever owned. Gave them to first tee and bought Cobra’s. Will never buy a Taylor Made product again.

Bought a set recently at Dicks at 75% off and did not like these clubs at all. I am back to my OS racs that are 6 years old. The XD’s have been sold at a great price hope they get hit well.

every brand in golf is lowering the degree of loft, so why are you so suprised and saying your glad you didnt get it? im 13 and i went from an 80 mph swing speed to a 95 mph swing speed with these irons…

All makers are strengthening lofts to sell distance. Remember though that you can always have your local golf shop bend your lofts back to standard.

As for which flex is right for you…go to a launch monitor and measure your clubhead speed. If it’s under 90 mph, regular flex is right for you. Mind you, off the rack clubs can vary enormously from set to set as to the ACTUAL flex. What’s printed on the shaft often doesn’t correspond to the real flex. Furthermore, the flex of your 5 iron might be different from the flex in your 9 iron! That is why pros get their clubs custom made, so that all the irons in their bag have the same shaft characteristics. in the past, the average Joe couldn’t hope to get this kind of custom fitting, but nowadays it’s simply a matter of going to your local golf retailer, as they have the equipment to measure your swing and the means to put the right shafts on your clubs, adjust the lie angles, etc.

Where can I get a set of Taylormade Burner XD clubs. SW to 6 Iron. Hybrid 5, 4 and 3. 7 Wood Burner. Sold mine when I replaced them with SIM2 irons, which I hate!!

Your email address will not be published. Required fields are marked *

Notify me of follow-up comments by email.

Notify me of new posts by email.

TaylorMade Tour Burner driver review

TaylorMade Tour Burner driver review. Golf Monthly review of TaylorMade Tour Burner driver

The Tour Burner driver made an immediate impact on tour when it went straight into many of the TaylorMade players’ bags. The crown of the driver is considerably smaller than the oversize sole. “Inverted Cone Technology” is used in both the driver and the new Tour Burner irons to enlarge the sweetspot and offer more forgiveness. Where next? More On Test: - Taylormade Burner Plus irons review - TaylorMade Burner Fairway and Rescue review Galleries: - TaylorMade Burner 2009 driver pictures - TaylorMade Burner Plus Irons pictures

Why you can trust Golf Monthly Our expert reviewers spend hours testing and comparing products and services so you can choose the best for you. Find out more about how we test .

TaylorMade R7 CGB Max driver pics

TaylorMade r7 Limited driver pics

The small crown and oversize sole are designed to create a centre of gravity that is 40% lower in the clubface than the Burner TP's. The head is designed to help create a high launch angle and low spin rate for longer, straighter drives. A TP version is also available (£379) which sits 2 degrees open and is available in a choice of three shafts.

Get the Golf Monthly Newsletter

Subscribe to the Golf Monthly newsletter to stay up to date with all the latest tour news, equipment news, reviews, head-to-heads and buyer’s guides from our team of experienced experts.

Scottie Scheffler smiles ahead of the final round of the 2024 RBC Heritage

The World No.1 was said to have tried to drive past a police officer into Valhalla Golf Club following a misunderstanding regarding traffic flow

By Jonny Leighfield Published 17 May 24

Valhalla clubhouse and flags blowing in the wind

The PGA of America initially announced the news shortly before the first groups were due to tee off on Friday

Brooks Koepka walks to a tee at the PGA Championship

Defending champion Brooks Koepka shot the best round of the 16 LIV Golfers in the field at Valhalla

By Elliott Heath Published 17 May 24

Contact Future's experts
Terms and conditions
Privacy policy
Accessibility statement
Cookies policy
Advertise with us

Golf Monthly is part of Future plc, an international media group and leading digital publisher. Visit our corporate site . © Future Publishing Limited Quay House, The Ambury, Bath BA1 1UA. All rights reserved. England and Wales company registration number 2008885.

Please enable JS and disable any ad blocker

Are Taylormade Burner 2.0 Irons Still Good? Are They Forgiving for High Handicappers

When Gary Adams founded TaylorMade in 1979, he strived to manufacture golf clubs that were easy to launch and incredibly forgiving.

Four decades later, the company continues to satisfy the needs of professionals and amateurs. In this article, we review the once-popular TaylorMade Burner 2.0 irons.

The goal of this review is to determine whether these veteran irons are still suitable for high handicappers. They once provided all the game improvement tech you could ask for. However, we are determined to see how they compare to a set of irons from this decade.

Are the Taylormade Burner 2.0’s Still Good?

From a performance perspective, the TaylorMade Burner 2.0 irons are perfectly suitable for high handicappers.

They possess an expanded sweet spot, a thin, flexible clubface, and optimally positioned CG. Therefore, high handicappers enjoy maximum forgiveness, consistent distance, and accuracy.

The challenge arises when sourcing these irons. Because of their age, it is hard to find new or preowned sets of the Burner 2.0 irons. This is unsurprising considering that they first hit the shelves in 2010.

Are the Taylormade Burner 2.0’s Forgiving for High Handicappers

Yes, the Burner 2.0 irons are incredibly forgiving for high handicappers. At the time of their release, TaylorMade suggested that these irons worked for scratch to 30-handicappers.

Each iron is precisely constructed to deliver favorable launch, ball speed, and spin. Therefore, you optimize your distance and accuracy through the bag.

A multi-functional sole is employed to lower the center of gravity (CG) and increase the moment of inertia (MOI). The lower CG makes it easier to consistently get your golf ball in the air, while higher MOI prevents your clubface from twisting. Reduced twisting encourages a square clubface at impact to prompt straighter shots.

Furthermore, these irons contain Inverted Cone Technology (ICT), increasing the sweet spot on your clubface. The expanded sweet spot helps boost your Coefficient of Restitution (COR). That means your clubface maintains ball speed and limits sidespin on off-center strikes.

As a result, these irons produce ample distance and accuracy on all shots. Therefore, they are super forgiving for high handicappers.

Taylormade Burner 2.0 vs Sim Max Irons?

It is imperative to compare the technology of the 2.0’s to a newer model of TaylorMade irons. This helps you better understand the performance of the Burner 2.0s, which determines whether they are still suitable for high handicappers.

I decided to compare the 2020 SIM Max irons to the 2nd generation Burners and found a few differences between them. The principal discrepancies involve an Echo Damping System, Thru-Slot Speed Pocket, and Speed Bridge Technology.

The Echo Damping eradicates unwanted vibrations on off-center strikes and produces crisp acoustics.

In addition, TaylorMade’s engineers employed a Thru-Slot Speed Pocket, which increases the flexibility of the lower portion of the clubface. It helps increase ball speed on strikes off the lower face. Plus, the Speed Bridge System maximizes stability for increased MOI and consistent ball speed.

Aside from the names of these features, their functions are similar to the Burner 2.0’s and SIM Max irons. The main differences are the soft feel offered by the Echo Damping System and the added ball speed from the Thru-Slot Speed Pocket. Otherwise, they are both long and forgiving.

Taylormade Burner 2.0 First Impressions

Off the bat, the TaylorMade Burner 2.0’s are chunky game improvement irons built for higher handicappers. Naturally, they feature wider soles and an undercut cavity back to offer superior turf interaction and a higher launch.

Their oversized profile is not uber attractive. However, do not judge this club by its sole, as it helps the average golfer get their ball airborne and flying long.

Taylormade Burner 2.0’s Irons Selling Points

Multi functional sole improves turf interaction
Each iron generates optimal spin, ball speed, and launch
Larger sweet spot
High COR clubface
A large unsupported face increases flexibility
Produces accelerated ball speed
Restricts sidespin
High launching

Taylormade Burner 2.0 Key Technology

Optimal cg placement.

TaylorMade designed each iron with precisely positioned CG. This helped the engineers ensure that the clubs generate optimal ball speed, spin, and launch.

For example, the CG is low and back in the longer irons to help you launch higher, even on mishits. Therefore, you enjoy optimal distance and consistency in your long game.

Conversely, the CG is positioned closer to the center of the clubface for short irons and wedges. This produces a superior feel and control to limit ballooned shots with excess spin.

Inverted Cone Technology (ICT)

The ICT from TaylorMade expands the active zone on the clubface for superior COR. That means it is supplied with a wider sweet spot to accelerate ball speed and limit side spin.

As a result, you generate straight, long golf shots for added yardage.

Multi Functional Sole

A multi-functional sole design features on the Burner 2.0 irons. The construction lowers the CG and reduces friction with the turf to ensure a clean strike from any lie.

Lower CG is especially prevalent in the longer irons. It enables you to consistently launch the stronger lofted clubs high and far.

Large Unsupported Face

The lower clubface on these irons is built for maximum flex through impact. That helps you ramp up ball speed on strikes low of the face.

Therefore your golf ball still gets sufficient speed and spin on it to launch into the air and travel long.

Taylormade Burner 2.0 Lofts and Lies

Who should buy the taylormade burner 2.0 irons.

After analyzing the performance features and specs of the Burner 2.0 irons, I believe they are suited to high handicap golfers.

Since they are tough to find new, you can source pre-owned ones at an incredibly affordable rate. That may appeal to beginners or infrequent golfers looking for a reliable set of clubs at an affordable rate.

Despite being 12-years old, the TaylorMade Burner 2.0 irons are incredibly forgiving, consistent, straight, and long. If you do not mind a set of preowned quality golf irons, inspect the Burner 2.0s .

Distance: 91/100

Forgiveness: 92/100, workability: 82/100, overall performance: 89/100, value: 93/100, overall score: 89/100, check out more reviews here:.

Aidan is a low-handicap golfer who came from over 110 to breaking 80 in less than 1 year.

Aidan has become obsessed with becoming a scratch golfer and plays golf on every possible occasion, even in the snow!

Share this post:

© 2024 Amazon Associates Program. Southampton Golf Club is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. *Amazon and the Amazon logo are trademarks of Amazon.com, Inc., or its affiliates.

Product Reviews

The Garmin S62 vs The S60 – There Is A New Sheriff In Town
Nikon Coolshot Rangefinder Review
FORB Home Golf Putting Mat Review
Garmin Approach S60 Premium GPS Golf Watch Review
Putt-A-Bout Indoor Putting Green Review
All Golf Equipment Reviews
Privacy Policy

Golf Buying Guides

Definitive Buying Guide For Golf Balls
Golf GPS Watch Buying Guide
Definitive Guide To Golf Rangefinders
Ultimate Golf Gifts Buying Guide For 2023
Golf Bag Buying Guide
Golf Club Shaft Flex Guide

IMAGES

TaylorMade Burner Tour Irons
TaylorMade Tour Burner Irons Steel Shaft
1996 Taylormade Tour Burner Irons
TaylorMade BURNER TOUR Golf Irons
TaylorMade Launches Tour Burner Driver, Irons, and More (Bag Drop
TaylorMade Tour Burner Irons Graphite Shaft

VIDEO

american golf advert-TaylorMade Burner Plus Irons
taylormade tour burner Drivers requested by (tigerwoodsfan14) 2008-2009
TaylorMade BURNER TP IRONS
Testing The ALL-NEW 2023 P·790 Irons
TaylorMade Burner 1.0 Irons
TaylorMade P770 Irons

COMMENTS

TaylorMade Burner Irons By Year: The Complete List!
TaylorMade Burner Irons: 2010-2019 TaylorMade Burner 2.0 irons, released in 2010. In 2010, TaylorMade launched the Burner 2.0 irons. For this design, TaylorMade engineered each iron individually — rather than simply altering the loft angle. This results in uniform distance gaps, increased playability, and better sound and feel.
TaylorMade Irons by Year
In 1996 and 1997 TaylorMade released a series of Burner Bubble irons. The 96' Burner Bubble Tour was in the bag for two of the four majors in 96', which gave some serious validity to the line. 97' brought the Ti Bubble 2 which was the introduction of using multiple materials to lower the center of gravity, which helped improve distance ...
TaylorMade Irons By Year: The Complete List!
This included the larger TaylorMade Burner Plus, along with Tour Burner and Burner 1.0 irons. Finally, the TaylorMade R9 series was introduced. In short, the traditional R9s were popular with everyday golfers, while the TP version was widely adopted on tour. TaylorMade Irons: 2010-2019 TaylorMade Burner 2.0 irons, released in 2010 (Image: The ...
TaylorMade Tour Burner Game Improvement Irons Review
The Tour Burner irons are fantastic clubs for mid handicappers in particular, and only something very special kept these stunning new irons off our top spot. Contact: 0880 389 4292. Wesbite: www.taylormadegolf.com. Price: £499 (s) £599 (g)
Golf Club Specs by Year
Rossa Monza. Miscela. R500 Series Drivers. Burner 420 Driver. rac Fe2O3 Wedges. rac Chrome. Rossa Putters. From irons to drivers, learn the history and evolution of TaylorMade models over the years. Check out detailed product specs for each golf club set by year.
Taylormade Irons: Year-by-Year Timeline Review
The Taylormade Burner irons were first released in 2009. They feature a large clubhead and a wide sole that makes them easy to hit. The Burner irons are designed for golfers who want maximum distance and forgiveness. The latest version of the Burner irons is the Taylormade Burner 2.0, which was released in 2011.
TaylorMade Tour Burner Iron Set
The TaylorMade Tour Burner Irons feature a soft, durable stainless steel head with TaylorMade's Inverted Cone Technology for any player looking for more distance and forgiveness in their irons. With a medium top-line and offest, along with a new Multi-functional sole, the Tour Burner Irons provide a low CG with exceptional playability. ...
TaylorMade Irons by Year: 40+ Years of History
Tour Burner: 2008: Burner: 2009: Tour Preferred TP: 2009: R9: 2009: R9 TP: 2009: Burner Super Launch: 2010: Burner 2.0: 2010: R11: 2011: Tour Preferred CB: 2011: Tour Preferred MC: ... Yes, TaylorMade is just about to release new irons for 2024. The Stealth HD irons will be released in retail February 17th and will cost $999.99. The focus of ...
TaylorMade Launches Tour Burner Driver, Irons, and More
The Tour Burner irons are available from a 2-iron through 9-iron plus a 46° pitching wedge, 55° sand wedge, 50° "attack" wedge and a 60° lob wedge and can be yours in April. A set of Tour Burner irons (3-PW) will run $840 (MSRP) for steel ($699 street) and $1,040 (MSRP) for graphite ($899 street). Individual clubs are available in steel ...
TaylorMade Irons By Year
TaylorMade Irons in 2011. Building on the success of the Burner 2.0, TaylorMade continued to innovate in 2011 with the release of the TaylorMade RocketBallz iron set. This set incorporated a "Speed Pocket" design, which enhanced ball speed and distance.
PDF Burner Distance with Tour Playability
Burner Distance with Tour Playability FEATURE ADVANTAGE BENEFIT ... TOUR BURneR® IROnS SpecIfIcaTIOnS Iron Left Handed Loft Lie Offset Graphite STD flex Graphite SW Steel STD flex Steel SW Grip 2 No 18˚ 60.5˚ 6.1 mm 39.50" S,R,M D1 39.25" X,S,R D2 TaylorMade Tour Velvet
How the TaylorMade Burner Plus Irons Pushed Boundaries
The Burner Plus irons were TaylorMade's most draw-biased iron at the time, promoting a right-to-left shot shape to help players who struggle with pushes and slices. The Burner Plus irons are available in 3- through 9-iron, and four different types of wedges. Shafts are available in both graphite and steel designs.
Burner Driver, Fairway, & Irons
Burner irons sparked a performance leap in the game improvement category. The distance-producing design unlocked extra levels of ball speed and forgiveness for golfers who needed them the most. It set TaylorMade on a path to excellence in an emerging space and laid the foundation for modern game improvement constructions.
Photos of TaylorMade irons from the last 35 years
2007: The R7 TP irons were smaller irons, and used on the PGA Tour. The Burner Plus irons were released in 2008. The Burner XD irons were released in 2008. The Tour Burner irons were released in 2008. The Burner '09 irons are considered by many to be golf's first "distance iron." They sold exceptionally well for TaylorMade.
TaylorMade Burner 2.0 Iron Specs and Review: Unleash Your Game with
The TaylorMade Burner 2.0 Irons and the TaylorMade Rocketbladez Irons are both popular choices among golfers seeking performance and playability. Here's a brief description of each iron model: Both iron models incorporate modern technologies and design features to enhance playability and deliver impressive results on the golf course.
TaylorMade Tour Burner Driver Review: Specs, Pros and Cons
Made for advanced players, the TaylorMade's new Tour Burner driver features a 450cc titanium head. It is streamlined with a steel dual crown and unique perimeter weighting. TaylorMade equipped the Tour Burner with a TaylorMade RE-AX, 60g graphite shaft available in regular, stiff and extra stiff flex.
TaylorMade Burner 2.0 Iron Set
Description. Specs. The TaylorMade Burner 2.0 Irons feature individually engineered clubs to promote distance, workability and forgiveness throughout the set when you need it. Each Iron in the Burner 2.0 set is individually engineered to promote distance and uniform distance gaps. The CG in each head is also individually placed to optimize long ...
TaylorMade Burner XD Irons Review
The Burner XD irons feature "Supersized" clubheads and "SuperFast Technology.". The first helps make them forgiving and the second is all about distance. The XD clubheads are built on a 17-4 stainless steel frame, but have a thin titanium face (read "high CoR"), intended to promote ball speed and thus add distance.
TaylorMade Burner 2.0 irons
The TaylorMade Burner 2.0 irons are available in eight different shaft options including Superfast steel and graphite and Project X. After the success of the original Burner irons, the TaylorMade Burner 2.0 irons are designed to offer more feel and playability. The sound and feel have been refined thanks to an improved vibration management system.
TaylorMade Burner XD Irons Review
The graphite shaft option retails at £749.00, with the steel option at £649.00. If forgiveness is what you are looking for, then the TaylorMade Burner XD Irons could be for you. Off the deck, the light pick-up allowed me to hit through the ball, while the added feel around the greens only added to the package.
TaylorMade Tour Burner driver review
The Tour Burner driver made an immediate impact on tour when it went straight into many of the TaylorMade players' bags. The crown of the driver is considerably smaller than the oversize sole. "Inverted Cone Technology" is used in both the driver and the new Tour Burner irons to enlarge the sweetspot and offer more forgiveness.
Burner 2.0 HP Irons Steel Combo Set
Features. NEW Burner 2.0 High Polish Irons. Legendary Burner Distance Plus More Feel and More Playability. Each iron individually engineered, resulting in the enhancement of multiple club properties that promote distance, uniform distance-gaps, increased playability and better sound and feel. Think-faced, high COR long-irons promote faster ball ...
Are Taylormade Burner 2.0 Irons Still Good? Are They Forgiving for High
The challenge arises when sourcing these irons. Because of their age, it is hard to find new or preowned sets of the Burner 2.0 irons. This is unsurprising considering that they first hit the shelves in 2010. Are the Taylormade Burner 2.0's Forgiving for High Handicappers. Yes, the Burner 2.0 irons are incredibly forgiving for high handicappers.

TaylorMade Irons by Year

List Of All Taylor Made Irons Models by Year Released

TaylorMade Irons Over the Last 5 Years

TaylorMade Burner Irons by Year

TaylorMade Irons History

How Often Does TaylorMade Release New Irons

Other Brand’s Irons by Year

About the Author

Leave a Comment Cancel reply

2 thoughts on “TaylorMade Irons by Year”

TaylorMade Irons By Year: The Complete List!

TaylorMade Irons By Year

TaylorMade Irons: 1980-1989

TaylorMade Irons: 1990-1999

TaylorMade Irons: 2000-2009

TaylorMade Irons: 2010-2019

TaylorMade Irons: 2020-Present

TaylorMade Qi Irons

Share This Article:

Jake Taylor

TaylorMade Tour Burner Game Improvement Irons Review

At a glance

What we say...

Product Information

TaylorMade Irons by Year: 40+ Years of History

List of TaylorMade Iron Models by Year

Read more: The Best TaylorMade Irons

Read more: Taylormade M2 vs M6 Irons: Which Holds up Better

SIM Max Irons

SIM 2 Max OS Irons

Stealth Irons

Read more: Callaway Drivers By Year (List Provided)

Tips for Choosing the Right TaylorMade Iron Set for Your Game

Read more: The Best TaylorMade Drivers

You might also like these

CONNECT WITH US

TaylorMade Irons By Year – A Comprehensive Guide To TaylorMade Irons From 2010 To 2021

TaylorMade Irons by Year

TaylorMade Irons in 2010

TaylorMade Irons in 2011

TaylorMade Irons in 2012

TaylorMade Irons in 2013

TaylorMade Irons in 2014

TaylorMade Irons in 2015

TaylorMade Irons in 2016

TaylorMade Irons in 2017

TaylorMade Irons in 2018

TaylorMade Irons in 2019

TaylorMade Irons in 2020

TaylorMade Irons in 2021

Conclusion and Future Trends

You may also like

Leave a Comment Cancel reply

Photos of TaylorMade irons from the last 35 years

42 Comments

You may like

Whats in the Bag

More Xander Schauffele WITBs

Cam Smith WITB 2024 (May)

Patrick Reed WITB 2024 (May)

Dave Portnoy places monstrous outright bet for the 2024 Masters

Justin Thomas on the equipment choice of Scottie Scheffler that he thinks is ‘weird’

Tiger Woods arrives at 2024 Masters equipped with a putter that may surprise you

‘Absolutely crazy’ – Major champ lays into Patrick Cantlay over his decision on final hole of RBC Heritage

Report: Tiger Woods has ‘eliminated sex’ in preparation for the 2024 Masters

Two star names reportedly blanked Jon Rahm all week at the Masters

Report: LIV Golf identifies latest star name they hope to sign to breakaway tour

Neal Shipley presser ends in awkward fashion after reporter claims Tiger handed him note on 8th fairway

What we know about Bryson DeChambeau’s 3D-printed Avoda irons

Brandel Chamblee has ‘no doubt’ who started the McIlroy/LIV rumor and why

Club Junkie WITB, league night week 5: Another L.A.B. putter arises

TaylorMade Burner 2.0 Iron Specs and Review: Unleash Your Game with Performance and Precision

Table of Contents

Design and Construction

Clubhead Design and Material

Perimeter Weighting Technology

Inverted Cone Technology

Iron Specifications

Loft and Lie Angle

Shaft Options