voyage vr9000 specs

CLARIFIER: FINE/COURSE LOCKED +/- 1KHZ- UNMODIFIED

CONTROLS: ON/OFF/VOLUME/SQUELCH, ECHO/TONE, SWR CAL/RF POWER, BAND SELECTOR, MODE SWITCH (AM-FM-USB-LSBCW), CLARIFIER (FINE)/COURSE, CHANNEL SELECTOR, +10KC SWITCH, ROGER BEEP SWITCH, SWR/CAL SWITCH, OFF-NB/ANL SWITCH, FREQ. COUNTER SWITCH, S/RF SWITCH.

AMENITIES: FREQUENCY COUNTER, SWR SYSTEM, ECHO, ROGER BEEP, VARIABLE RF OUTPUT POWER, +10KC FOR RC CHANNELS, ANL(AUTOMATIC NOISE LIMITER), NB(NOISE BLANKING), EXT. SPEAKER JACK, CW JACK, STANDARD 3 PIN DC POWER JACK, STANDARD 4 PIN MIC JACK(WIRED SAME AS COBRA, UNIDEN, CONNEX, RANGER), SEVEN BANDS OF FREQUENCY OPERATION, FINE/COURSE CLARIFIER FOR SSB OPERATION. SIZE: 2-3/8 H, 7-7/8 W, 9-1/4 D DIMENSIONS ARE IN INCHES.

Ranger Voyage VR-9000 Documentation Project CBTricks.com

Disclaimer: Although the greatest care has been taken while compiling these documents,

we cannot guarantee that the instructions will work on every radio presented.

Install   Star-Bryte Knobs  with dimmer control 7 Knob set parts and labor.

• High Output Models
• Base Radios
• Refurbished Radios
• Road King Noise Reduction
• Astatic Noise Reduction
• Factory Grade
• Power Microphones
• Echo Microphones
• Base Microphones
• Mic Parts and Acc.
• Microphones - All Types
• Speakers - External
• Radio Mounts
• Power Cords
• Fuse and Fuseable Links
• Noise Filters
• Chrome Case and Faceplate
• Jeweled Knobs
• Unique Face Plates
• Base Station
• Base Loaded
• Center Loaded
• Fiberglass Whip
• Trunk Mount
• Roof Top Mount
• Magnetic Mount
• Non Grounded
• Firestik No Ground
• Antenna Mounts
• Antenna Mounting Kits
• Magnetic Mounts
• Spring - Quick Disconnect
• Meter - SWR and Watt
• Predator Antenna Parts
• Wilson Antenna Parts
• Combo (Mobile / Desktop)

The Defpom Forum, for RadioMods, S&M Software and Music by The Defpom

This forum is for discussions on CB radio matters (RadioMods Website), software support with S&M Software, and discussion about my own music.

Skip to content

• Board index RadioMods Section CB Radio Alignments

voyage 9000 peak and tune pot locations

Post by tim_spur » Thursday 23rd Aug 2007, 20:14

Post by ramblingman » Thursday 23rd Aug 2007, 22:06

Post by perrym1962 » Friday 24th Aug 2007, 14:50

Post by tim_spur » Friday 24th Aug 2007, 17:23

Post by perrym1962 » Friday 24th Aug 2007, 20:15

Post by sonoma » Saturday 25th Aug 2007, 2:28

Post by ramblingman » Saturday 25th Aug 2007, 3:57

Post by tim_spur » Saturday 25th Aug 2007, 12:58

Post by ramblingman » Saturday 25th Aug 2007, 17:17

Post by Uncle Ray » Saturday 15th Sep 2007, 6:16

Post by Rabbit Ears » Friday 9th Jan 2009, 15:23

Return to “CB Radio Alignments”

• Board index
• All times are UTC

Powered by phpBB ® Forum Software © phpBB Limited

Privacy | Terms

• Search forums

Follow along with the video below to see how to install our site as a web app on your home screen.

Note: This feature may not be available in some browsers.

• Citizens Band Related
• General CB Services Discussion
• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Workman FT-311 TVI Filter

• Thread starter JJim
• Start date Jun 3, 2006
• Jun 3, 2006

Hello everybody, I have 2 questions here about the Workman FT-311 TVI Filter. Question the first: Has anybody ever used one of these filters or know anything about them? I know they are low wattage (100 watts) but I am curious if this filter is worth using when I am not running anything above 100 watts. Question the second: Now, while on the subject, what would happen if I fired up my AMPower 275 amp with this filter in-line? Would I see smoke? Would I damage my radio? Would I damage the AMP, the antenna? I just do NOT know what can happen and I am curious. :twisted: Keep in mind, I am not SOOOOOO curious that I want to just try it and watch the fireworks! DX is in... Hope to QSO with some of you guys on 38LSB 73's the 351 NJ is QSX in the Garden. Thanks guys. Jim Uniden President HR2510 EchoMax 2000 Original M400 antenna AMPower 275 amp. (working great)  

JJim...try the filter with just the radio...(check SWR's) if it does not raise the SWR's.....hook it up... Edit...dont run that filter with the 275...thats a 300w pep amp...ull burn up the filter...or mabye something else... AM POWER  

• Jun 5, 2006

FT-311 Filter Thanks for the response Adam. Also, here is one problem that I am having. I have to hook the filter up in-line before the Amplifier. Follow this coax line: Coax from radio to a Workman 3 position switch Coax from switch to the filter Coax from filter to Amplifier Coax from Amplifier to 3 range Power/Modulation/SWR Meter Coax from Meter directly to antenna In this configuration, when I key the mic, I get a horrible squealing noise from my Uniden HR2510 radio, but not from my Voyage VR9000 radio. :? When I move the filter between my Amp and meter, it works fine. I obviously cannot run it here because of the wattage limitations. Any suggestions here. I have checked everything several times, disconnected and reconnected several times, had a friend check my work. Same symptoms. It is defying all logic (to me). Any ideas? Anybody? Thanx -jim  

Try a double barrel conector (no coax) from radio to filter.. (or a right angle ) take switch out of line...go from filter 6' long to amp...then 6' long to meters...then ant out... That should fix ur problem... AM POWER  

Registered User

get rid of the switch, and the filter. if you get a larger amp get a drake filter.  

FT-311 Filter OK... it seems that both of you are thinking the switch is the problem? I only guess this because you both suggest getting rid of the switch. What exactly is happening here? Is this a common problem? Sorry to sound like a 3 year old (question box). Being new at this, I am going to make the usual newbie errors, but I always like to go to you guys to get the advice and the schooling before releasing the smoke from any of my components. The switch is a 1000 watt switch (for what it is worth). Thanks again guys. You're the best! -jim See ya in skipland.... 38LSB the 351 NJ... QSX in the garden..  

let us know how it works out.. ??? AM POWER  

the reason i said get rid of the switch. is first off it should be at the very end, and you dont mention having mutiple antennas so its not needed. 8) no need for the filter between radio and amp unless its been hacked all up. look for a Drake TV-3300-LP on ebay. put that after your amp and ground them.(radio,amp,filter)  

FT-311 Filter Sorry guys You are suffering from "lack of information" due to my failure to give some needed details. 1st, I have the switch because I am using 3 different radios on 1 antenna. That is also why the switch is first. This way, I can use either straight out signal or I can turn on the Amp on any of the 3 radios. Now, the 3 radios I have here are: 1=Uniden President HR2510, 2=Voyage VR9000, 3=Cobra 142GTL. The 2510 is running about 15 watts, the VR9000 is running 15watt DK swinging up to 40watts, the 142GTL is pretty much stock 5 watts to 8. With the original hookup I described, the VR9000 worked just fine as well as the 142. The 2510 however, was producing a horrible squeal when I keyed the mic. Now it only does this since I installed the filter. The main purpose for the filter was because I am bleeding into my surround sound sub woofer in the house. I am also bleeding one of my neighbors' computer speakers. I misread the specs on the filter and thought I was getting a 1000 watt filter when, in fact, it was 100 watts. Again, that is the reason I had put the filter "before" the amp. it was to clean up the signal and TVI for all 3 radios. Once the Amp is turned on, I am most likely going to create bleedover. (Not a real problem since I rarely use the Amp before midnight). Bottom line here guys. Why do I only have a problem keying one radio and not the others? Also, am I pissing into the wind here with this filter? Should I just get another and put it after the Amp? I am sorry for the incomplete picture. Sometimes I forget that just because I know exactly what is going on, not everybody else does. thanx again guys, jim  

• Jun 6, 2006

Settings Notifications

• Inverse message direction
• Display editor on top
• Enable maximized mode
• Display images as links
• Hide bot messages
• Hide statuses
• Hide chatter list
• Show messages from ignored users
• Disable chat
• Receive mention alerts
• Normal messages
• Private messages
• Whisper messages
• Mention messages
• Bot messages
• No one is chatting at the moment.
• @ BJ radionut : Mar 30, 2024
• @ BJ radionut : Apr 6, 2024
• @ Wildcat27 : Hello I have a old school 2950 receives great on all modes and transmits great on AM but no transmit on SSB. Does anyone have any idea? Apr 9, 2024
• @ BJ radionut : Saturday at 12:59 PM
• @ ButtFuzz : Good evening from Sunny Salem! What’s shaking? Sunday at 3:52 AM
• This forum does not allow a single user to have more than one username. If anyone wants to change their username contact an admin and it will be done. Multiple accounts belonging to the same member will be deleted without warning.

• Скидки дня
• Справка и помощь
• Адрес доставки Идет загрузка... Ошибка: повторите попытку ОК
• Продажи
• Список отслеживания Развернуть список отслеживаемых товаров Идет загрузка... Войдите в систему , чтобы просмотреть свои сведения о пользователе
• Краткий обзор
• Недавно просмотренные
• Ставки/предложения
• Список отслеживания
• История покупок
• Купить опять
• Объявления о товарах
• Сохраненные запросы поиска
• Сохраненные продавцы
• Сообщения
• Уведомление
• Развернуть корзину Идет загрузка... Произошла ошибка. Чтобы узнать подробнее, посмотрите корзину.

Oops! Looks like we're having trouble connecting to our server.

Refresh your browser window to try again.

R&K Insider

Join our newsletter to get exclusives on where our correspondents travel, what they eat, where they stay. Free to sign up.

A History of Moscow in 13 Dishes

Featured city guides.