travel trailer 50 amp to 30 amp

RV Chronicle

Does A 50-amp RV Into A 30-amp Service: Answered!

Plugging in a 50-amp camper to a 30-amp power source will not harm anything if you do not try to operate all your appliances such as your Air conditioners, hot water system, refrigerator on AC power. Running some items such as Air conditioner units on low amperages can damage the motor. Some appliances will have to run off propane, such as the Refrigerator and hot water system.

An adaptor will be required for your RV’s 50 amp plug to go to a 30-amp plug on the pedestal.

What Happens When You Plug In Your 50 Amp RV Into A 30 Amp Service?

When your 50 Amp RV plugs into a 30 Amp service using a 30 Amp male (M) to 50 Amp female (F) plug adapter, your RV will relatively be only getting 30 Amps of power instead of the 50 Amps that it needs. This means you have to be very mindful of how much power you’ll be using onboard your 50 Amp RV. From knowing exactly which appliances draw more power during use (e.g. microwave, hairdryer), to those that need consistent power (e.g. RV refrigerator, heater or AC). You may even need to switch off some of the lest critical appliances first to be able to use another one, and/or would have to switch to propane (if any of your appliances have this option) to minimize the energy consumption on your RV.

Now, what initially happens in your 50 Amp RV electrical system when you plug it into a 30 Amp service? Your charger will start up in bulk charge mode, consuming around 12-15 Amps of power. Because your RV is taking in less power than it needs, it will take a few hours for the electrical system to settle in and get used to it.

If you draw more energy in your RV than the 30 Amp service you’re plugged into can offer, you could potentially:

• (1) Trip the circuit breaker on the pedestal (or your RV’s breaker or surge protector
• (2) Damage your appliances &/or electronics due to the substandard power (which could be more expensive in the long term)

Alternatively, you could try using an adapter like the Camco 21050 Heavy Duty PowerGrip Maximizer 45 Amp Adapter that can connect to both the 30 amp and the 15 amp service so you could get 45 amps.

What Is The Difference Between A 30 Amp And A 50 Amp RV Hook Up?

The primary difference between a 30-amp and a 50-amp RV hook up is number of volts that one provides over the other. A 50-amp service provides 3.3 times more volts and watts than a 30-amp service can provide, thus allowing for RV with 50-amps to run 3 times more appliances than a 30-amp Rig. This chart breaks down the details of 30-amp vs 50-amp power.

RV’s with 30-amps are typically in smaller and don’t require as much power as a larger rigs, typically there’s one Air conditioner, microwave and power outlets.

Large RV’s with 50-amp AC power supplies are broken down into two 50-amps at 120 volts or also known as a 120 split phase service. This means that the electrical box in the RV is a split to have 50 amps for 2 different parts of your RV. A total of 12,000 watts of power allows for home appliances, multiple air conditioners units and many more appliances that can run on AC power. Here is an example of what a 50-amp box would look like.

Can I Plug My 30-amp RV Into A 50-amp Service Without Damage?

When you pull your Rig into a camping spot and they only have a 50-amp service, and your RV is only 30 amps. If you have an adaptor to go from 50 amps to 30 amps, your RV shoul be and not suffer any kind of damage. The 50-amp to 30-amp adaptor uses the hots on the 50 amp and the ground so your RV will not draw too many amps and damage your RV. The draw on amps will be on one of the legs of the wire, which is

Are 50 amp to 30 amp Adapters Safe?

50-amp male to a 30-amp female adaptor, are safe to plug a 30-amp RV into a 50-am power source. This does NOT cause serious harm to your RV’s electrical system as your RV will only draw the necessary power use. These electrical adaptors follow electrical standards that have been set out for use for the amps.

Is There A Difference Between a 30 Amp and A 50 Amp RV Hook-up?

There is a difference between a 30 amp and a 50 amp RV hook-up/service it comes down the is the amount of power it will provide. The 30 amp RV hook-up/service is the most common one available in RV parks, and it supplies around 3,600 watts (you get this by multiplying 30 amps x 120 volts). The 50 amp service on the other hand allows two (2) 50 amp 120v legs – which means that it actually offers 100 useable amps. Some RV park pedestals offer also a 15 or 20 amp service (which is similar to your outlets at home). You can find more details on it in this article .

How Do I Pick The Right Power Adapter for My RV?

When picking the right power adapter / dog bone adapters for your RV, you would of course always need to consider the compatibility for your RV power cord to whatever pedestal service is available, its efficiency, product safety, cost and any additional features that would suit your need. I also cannot stress electrical safety enough since nobody wants to get shocked or electrocuted, nor does anyone want to damage their RV electrical system because of a faulty adapter. With the myriad of adapter brands, types and features, I’d personally recommend getting the ones that are:

• (1) Heavy-duty and weather-resistant. This makes sense because, whether you’re drawing 30 or 50 amps of power from the service pedestal, your RV power cord & the adapter(s) are going to be exposed to the elements. Plus, making sure it has a heavy-duty construction is important since consistently drawing power can lead to the adapter/cord overheating (which means it could melt &/or cause a fire), especially when the adapter is plugged in for a long time.
• Ergonomically designed. Having an ergonomically designed adapter (like the Camco PowerGrip 30A M to 15A F Adapter which has a contoured shape and groves for an easier grip) or a dog bone adapter with handles (like the Camco 30A M to 50A F Dogbone Adapter with Easy PowerGrip Handle ) so that you don’t have to struggle connecting/disconnecting the adapters and power cords, which would be less damaging on the cable as well.
• Has a 90-degree connector to allow easier connection in tight spaces, plus, this also reduces strain on the cord.
• A locking connector to keep it securely attached (nobody wants a loose connection) and this also creates a weatherproof connection (especially if you have multiple adapters connected designed to fit standard inlets, Marinco, Hubbell inlets)
• Flexible dog bone cable (some claim they have 180 degree bend design or can still be very flexible in cold or hot temperature). Note: There are different dog bone adapter cable lengths, and a 12” length should be enough since shorter cables would have less probabilities of voltage drops.
• LED power indicator lights are also useful to show if there’s electricity flowing through.

Unless you’re familiar with the pedestals of the RV park(s) you frequent, it’s always good to have the needed adapters always on hand (unless the RV park sells or rents them out, which isn’t always the case). The common RV adapters and dog bone adapters available are:

• 15A M to 30A F
• 30A M to 30A F
• 30A M to 50A F
• 50A M to 30A F
• 30A + 15A M to 50A F (like Camco Heavy Duty PowerGrip Maximizer 45A Adapter as an example). (*A = Amp, M = male, F = female)

How Do I Pick The Right Extension Cord For My RV?

To be able to pick the right extension cord for your RV, you need to make sure you get the correct cord gauge versus amperage. For RVs, it’s important to get Gauge 10 (Ultra Heavy Duty) with the amp rating needed for your RV (available in 30A and 50A). This is important because if you’re charging/powering your RV, the cord will get hot, especially if you’re plugging in for a long time. This means if you’re using a lower rated extension cord, it will most likely overheat to the point where parts will melt down and it may not even allow the circuit breaker to trip, which can then lead to a fire. One of the most popular heavy-duty outdoor RV extension cords would be the Camco (55191) 25’ 30A PowerGrip extension cord which can also come in longer lengths and would also have a 50A available.

Common 50 & 30 Amp Questions

There are quite a few questions around 50 and 30-amp questions around your RV and hooking it up to your house as well as many misunderstandings around this kind of plugs

What Does A 30 Amp Plug look like?

A 30 amp plug has 3 prongs of which 2 are flat and slanted slightly, and one is round or “U” shaped. One of the flat angled prongs is Hot, which is the power, the other is the Neutral or return and the round or “U” shaped is the ground. Which is 110 volts.

What Does A 50 Amp Plug Look Like?

A 50 am plug has 4 pings of which 3 are flat and one round or “U” shaped. The 2 on the sides are hots or Hot 1 and Hot 2, while the flat on the bottom is the Neutral. The round at the top is the ground. Each of the hots are 120 volts each X 2 for 240 volts.

How do I know my RV is 30 amps of 50 amps?

The easiest way to know is to look at the shore hook up of your electrical on your camper or RV. If there are 3 pins, 2 of which are flat and one round, then your RV is 30 amps. If the plug has 4 pins of which 3 of them are flat and vertical and one round, then your RV is 50 amp. Here are images of each of the plugs.

Is a 50 amp RV plug 110 or 220?

A 50 amp RV plug (male) plug fits into a 220/240 female plug or receptacle as its called. This is in North America. This is accomplished by having 2 hot prongs on the plug each providing 120 amps each. A 50 amp plug can be identified by the 4 prongs on the plugin.

Is a 30-amp RV plug 220 or 110?

Most smaller RV’s use 30 amp power, and uses 110 amps. This can be identified by the shape of the prongs. There are 2 flat angled prongs and one round or “U” shaped prong at the top. The one prong provides a hot of 110 volts, while the other is a Neutral or return of power. The Round is the ground.

Can I Install A 50 Amp Or 30 Amp Plug On My House For My RV?

This is certainly something that can be done on your home so that you could plug your RV into your home power and use 30 amps or 50-amp power. The best way to do this is to hire a certified electrician for your area.

Dose A 30 Amp RV Outlet Need To Be GFCI?

A 30 amp RV outlet does not need to be GFCI, it simply needs to be hooked up directly to your breaker box on a 30 amp breaker, while using the proper wiring gauge for the run length.

Can I Plug My RV Into My Dryer Plug?

Although dryer electrical receptacles appear to be very similar to a 30 amp plug or 50 amp plug on your RV, do not fit. RV’s that use a 50 amp use a plug called a NEMA 14-50, while the dryer plug uses a plug called the NEMA 14-30 receptacle. If your house has an older dry receptacle, it may appear that a 30 amp RV could plug into it. However, that would not be possible as 30 amp RV’s or campers use a NEMA TT-30 plug and older style dry plugs are a NEMA 14-30.

Are Campers wired for 220?

Some campers are wired for 240 volts. If your camper uses a 50 amp plug, then it is wired for 220 V. However, other campers with a 30 amp plug are wired for 110 V. The most common campers that have 220 v are Class A motorhomes, Super C motorhomes, some Class C motorhomes, longer trailers (30 plug) and 5th wheel trailers. Class B motorhomes, smaller Class C motorhomes, smaller trailers all have a 30 amp plug so they are 110 v.

Can I Run My RV’s AC On 110 Electric Power?

Running your RV’s air conditioner on 110 house power is possible, however, you cannot run additional appliances such as your RV fridge simultaneously as the AC and there are certain steps that need to be followed or your 15 or 20 amp breaker to your house will flip. There’s more detail in this article Is it possible to run an A/C on 110 home electric ?

• ← 8 Awesome Small Fiberglass Travel Trailers With Bathrooms
• Can You Hook Up Your Home Electrical To Your RV? →

Similar Posts

Surge Protectors: Necessary Before Plugging Your RV!

13 Questions About RV Solar Panels For Beginners

Is It Possible To Run An A/C On 110 Home Electric?

RV Electrical

Last updated on: June 17, 2022

30-Amp and 50-Amp RV Service: Things You Need to Know

by Peter Wade

www.rvtalk.net is reader supported. When you buy through links on our site, we may earn an affiliate commission.

One necessity that RV parks and campgrounds offer is electrical services. At times, you can just plug your RV cord directly into a power outlet or generator at the campground. However, when the service available does not perfectly fit your RV’s amp rating, you will need an adapter. To safely use the campground’s electrical services, you must understand what power service your RV has, the difference between 30 amp and 50 amp hookups , and what kind of adapters you should use in different situations. 

This article will equip you with everything you must know to make sure you can use electrical services at the campground safely without damaging your RV’s system. As you might have known, your RV either is a 30-amp service or a 50-amp service. The campground also offers either or both 30-amp and 50-amp services. When there’s a mismatch, adapters make it easy to hook your 30-amp RV cord to a 50-amp outlet or vice versa, plug into a generator, or connect to a home outlet.

30 amp vs 50 amp RV Service

Plugging into a power outlet with different service, choosing rv surge protector, plugging into a generator, 30 amp to 50 amp adapter, 50 amp to 30 amp adapter, also: 30 amp to 15 amp adapter.

Your RV’s electrical system will typically be either a 30 amp service or a 50 amp service. Why the difference, and which one is right for you? This depends on just how much shore power you intend to use when you are plugged in at an RV campground. You can calculate the maximum wattage you can draw at any given time by multiplying the amp service of your RV by the voltage:

• A 30 Amp system x 120 Volts = 3,600 Watts
• A 50 Amp system X 120 Volts = 6,000 Watts

How to know which service your RV has? Check the type of plugs in your RV: 30-amp plugs have three pins or prongs, and 50-amp plugs have four.  

• A 30 amp plug has three prongs, including a 120 volt hot wire, a neutral wire and a ground wire. It is generally used on RVs with lower load requirements. A 30 amp service RV provides a maximum 3,600 watts: 30 Amp x 120 Volts = 3,600 Watts
• A 50 amp plug has four prongs that supply two separate 50 amp, 120 volt feeds. The four prongs include two 120 volt hot wires, a neutral wire and a ground wire. A 50 amp service RV provides a maximum 12,000 watts: 50 Amp X 120 Volts = 6,000 Watts

The more recent RVs and trailers usually come with a 50 amp service while the older ones come with a 30 amp service. In general, a 30 amp service is more common is smaller RVs with less appliances that consume electricity. For this reason, you will typically find only single AC units in 30-amp service RVs while 50-am service RVs might have two AC units, plus a washer dryer combo , a dishwasher, and a microwave oven. 

Related: A Systematic Guide to How to Wire a 50 Amp RV Plug

Why You Need To Know This

Why do you need to know what service your RV has? To make sure your plugs are the correct size to fit into a given power outlet at RV parks and campgrounds. The power outlets at RV campgrounds often provide both 30-amp and 50-amp outlets, although some only provide 30-amp outlets. Having an adapter on hand will give you more options, regardless of what the campground offers.

The second reason is for choosing the most suitable RV surge protector or EMS that matches your RV’s electrical system. If you have a 30 amp service, choose a surge protector that’s for 30-amp RVs. If your RV has a 50 amp service, pick a surge protector for 50-amp RVs. 

FAQ: Can I use a 30 amp to 50 amp adapter to plug my 30-amp RV into a 50-amp surge protector ?

No you cannot. The rule is absolute when it comes to RV surge protectors: 30-amp RVs need 30-amp surge protectors, and 50-amp RVs need 50-amp surge protectors. You should stick with a surge protector specifically made for your RV service. The power source is irrelevant. 

FAQ: Can I use a 50-amp surge protector to plug my 30-amp RV into a 30-amp outlet?

You shouldn’t. A surge protector triggers when it detects a power surge and prevents the current from wreaking havoc on your RV. In this case, a 50-amp surge protector won’t trigger soon enough to protect a 30-amp RV, so you risk damaging your system. On the other hand, if you’re using a 30-amp surge protector  to plug your 30-amp RV into a 50-amp power outlet, the surge protector will trigger too soon, thus limiting the power that your 50-amp RV receives.

To plug your 30-amp or 50-amp RV cord into a generator , you will need to use a special purpose adapter made specifically for generators. Generator plugs come in 3-prong and 4-prong styles, while 30-amp cords can be adapted to fit both 3-prong and 4-prong generator plugs, as can 50-amp cords. So you’ll need to make sure your adapter fits your generator’s plug style. 

Related: What Size Generator for 30 Amp RV is The Right Choice?

Adapters for RVs

FAQ: Can I plug my 30 amp RV into a 50 amp? 

Yes, you can plug 30 amp RV into 50 amp service receptacle, such as a power pedestal at a campground, by using an adapter. The female end of the adapter will plug into your RV cord, and the male end will plug into the power pedestal.  

However, even with an 30 amp to 50 amp adapter , your 30 amp service RV won’t receive more power than the 3,600 watts it can handle. With a 30-amp RV, the maximum power you can use is 3,600 watts, regardless of the receptacle you plug into. Many campers worry that the additional power provided by a 50-amp receptacle will fry their RV’s electrical system, but this isn’t the case. 

FAQ: How does a 30 amp to 50 amp RV adapter work?

How it works is intuitive. It’s in the name: 30 amp to 50 amp adapters are used to plug a 30-amp service RV into a 50-amp power outlet. These adapters have a 120 volt, 50 amp male plug on one end with a 120 volt, 30 amp female socket. 

The right process to plug the cords is to take the 30 amp cord that runs from your RV and plug it into the adapter’s female  socket. Then plug the male end of the adaptor into the 50 amp socket at the RV campground. Do not do this in reverse order.

If you do this in reverse order and the power is already active on the campground’s electrical outlet, you could risk blowing a fuse in your RV system at some point.

FAQ: Can I Plug My 50-Amp RV Cord into a 30-Amp Power Pedestal?

Yes. Conversely, to plug a 50-amp RV cord into a 30-amp power pedestal at a campground, use a 50 amp to 30 amp adapter . Plug the female end of the adapter into your RV cord, and the male end will plug into the power pedestal.

In this case, your 50-amp service RV  will be limited to 3,600 watts that the 30 amp power receptacle will provide. This means you won’t be operating at full power, so there will likely be considerable limitations on how many appliances you can run at once, especially when you want to keep the AC on for a while.

As mentioned above, 50-amp power outlets aren’t available at every campsite, so if you have a 50-amp service RV, it’s best to have a 30-amp adapter with you at all times. 

FAQ: Can I Plug My RV into a 15-Amp Home Electric Outlet?

In off seasons, when you need to put your RV into storage at home, you might wish to hook your vehicle to your home’s 15-amp power outlet to keep the battery charged. For this, you simply need a 30 amp to 15 amp adapter.  

READ MORE:

What to Do When RV Plugged in But No Power

Is it bad to leave your rv plugged in all the time.

About Peter Wade

Peter Wade is a co-ordinator and writer at www.RVTalk.net. His hobbies are coffee, RV camping and photography. He now enjoys exploring the U.S. by RV with his two dogs. After obtaining a MA degree in Public Relations and Journalism, he had 8 years of experience working for the R&D Department of Outdoorsy. Peter provides a unique look and insightful knowledge about the RV lifestyle, and fills his blog with everything from RV camping guides to reviews about necessary RV accessories. If you are an RV enthusiast and want to get the most-updated trends of the RV industry, Peter’s articles are the must-visit contents.

Related Articles in this Category

How to mount a generator to a travel trailer 3 simple ways to make it happen, top 12 rv power and extension cords in 2022, the 12 best led replacement bulbs for rv 921, the 15 best trickle chargers for rvs & cars in 2022, how to quiet a generator for camping: 6 smart rv hacks, the 12 best rv solar generators for the money in 2022, how much electricity does an rv use in one month, how to install a power inverter in a camper, the best rv power inverters (reviews) to buy in 2022, the most common signs your rv has electrical problems, best rv generators: an independent power source for rv camping, what size generator for 30 amp rv is the right choice, the best 30 amp & 50 amp rv surge protectors you can buy in 2022, a systematic guide to how to wire a 50 amp rv plug, leave a comment cancel reply.

Save my name, email, and website in this browser for the next time I comment.

• Find a Location

30 Amp vs 50 Amp: What’s the Difference?

Here are a few key definitions that help you understand the different electrical terms utilized in this article, as well as our other resources for RV electrical systems : 

• Amperes (current): The quantity of electrons that flows through a conductor – aka, the amount of current flow.
• Wattage (watts): A measure of electrical power equal to one ampere under the pressure of one volt.
• Voltage (volts): The electrical pressure or difference felt between two points in a circuit – aka, the force that causes electrons to flow due to a difference of potential.
• Resistance (ohms): Opposition to electrical movement. Less resistance = more electron flow; more resistance = less electron flow.
• Hot Wire: Carries the current from the power source to the outlet.
• Neutral Wire: Carries used electricity from the load back to the power source.
• Ground Wire: A safety measure that provides a lower resistance pathway to ground than the human body, reducing the risk of severity of electrical shock.

What is 30 Amp versus 50 Amp Service?

Your RV’s amp service— 30 amp or 50 amp — tells you how much current flow your RV is built for. Exceeding that current flow will cause a tripped breaker or blown fuse. 30 amp RVs are built to consume up to 30 amps of current flow, and 50 amp RVs are built to consume up to 50 amps.

The Key Differences: 30 Amp versus 50 Amp

RVs with lower load requirements generally utilize 30 amp service. 50 amp service is more common on larger RVs with higher load requirements, as the plug supplies two separate 50 amp, 120-volt feeds. 

For comparison’s sake, most residential homes are built with a 200 amp electrical service. This may be higher based on the size of the home and its load requirements.

Here are the major ways these two RV electrical systems differ: 

• 30 Amp Plug : a 120-volt hot wire, a neutral, and a ground.
• 50 Amp Plug : two 120-volt hot wires, a neutral and a ground.
• The Maximum Wattage: 30 amp service supplies up to 3,600 watts versus 50 amp service providing up to 12,000 watts. 
• The Number of Outlets: 30 amp RVs generally have fewer outlets than 50 amp RVs.
• The Breaker Panel: 30 amp RVs have a single row of breakers. 50 amp RVs have a split breaker panel, allowing heavy amp draw components to be split between the two sides of the panel. 

Technician Tip: Note that the main breaker set in a 50 amp coach is not interconnected, so it provides 120-volts AC, not 240-volts AC. However, they share a trip bar so that they trip together and reset together. Should the user exceed 50 amps or 6,000 watts on one side, both sides will trip even if there is little to no load on the other side. The result is less than the anticipated 12,000-watt capacity. Users must be cognizant of how the load center is balanced in order to manage it properly. This balance may be altered by the certified technicians at Camping World to better suit the individual user’s needs.

Average Amp Draw of Key RV Appliances

An important principle to understand when you’re new to RVing is the average amp draw of your large and small RV appliances. In most cases, you should avoid powering on all appliances simultaneously, as this is likely to overload one or more circuits, causing a breaker to trip or fuse to blow. 

Here is the average amp draws for your main RV appliances: 

• Air Conditioner: ~15 amps
• Electric Heating Element for Water Heater: ~10 amps
• Microwave: ~10 amps
• Refrigerator: ~5 amps

Other appliances that draw amperage include televisions, space heaters, coffee makers, electric fireplaces, hair dryers, onboard converters, and more. Items with heating elements — hair dryers, curling irons, coffee makers, electric skillets, etc. — will consume large amounts of power and may require shutting something else off in order to operate them safely.

When you add these amperages, you can see how quickly you approach a 30 amp RV’s electrical threshold. This is why managing your power consumption is so important to avoid overloading a circuit.

30 Amp vs 50 Amp Service and Generator Use

If your RV has an onboard generator , or you’re using a portable generator , do the math to understand how much amperage it’s rated for. When running your RV’s appliances on the generator, you may not be able to consume as much amperage as when connected to a power pedestal. 

For example, let’s say your 50 amp RV has a 5,500-watt generator. At 120 volts, that generator supplies up to 45.83 amps (5500 watts / 120 volts = 45.83 amps). This is critical to remember when boondocking or running your generator between campground stays.

30 Amp vs 50 Amp Electrical Adapters

It’s important to know that compatible electrical adapters allow you to plug a 30 amp RV into a 50 amp pedestal and vice versa. There are also adapters for plugging a 30 amp RV into a 120-volt AC receptacle, but there are limitations. 

Here are the important takeaways: 

• A 30 amp RV won’t receive more than the 3,600 watts it’s designed for, even when using an adapter to connect to a 50 amp plug.
• A 50 amp RV will be limited to 3,600 watts when using an adapter to connect to a 30 amp service.
• A 30 amp RV will be limited to 2,400 watts when using an adapter to connect to a 20 amp 120-volt AC outlet.
• A 30 amp RV will be limited to 1,800 watts when using an adapter to connect to a 15 amp 120-volt AC outlet.

Explore our full selection of electrical adapters to find the right choice for your RV.

30 Amp vs 50 Amp Surge Protectors

Whether your RV has 30 amp or 50 amp service, you’ll need a surge protector designed for that level of service. This device prevents electrical surges from damaging your RV’s electrical system and appliances. 

Learn more about RV surge protectors and how to choose the right one for your RV .

Access to reliable electricity is a major reason why tent campers call RVing “glamping.” But there’s much to learn about RV electrical systems when you’re new to them. Here are a few more resources: 

• AC vs DC Power Supply and Your RV’s Electrical System
• How to Hook Up Power and Water to Your RV
• Should You Leave Your RV Plugged in All the Time?

Do you have any questions about 30 amp or 50 amp electrical service? Let us know in the comments below.

• Comment (4)

We are new to RVing. We have a 2005 Holiday Rambler Ambassador. It is a 50amp MH. I am trying to understand the whole 30/50 amp usage. When I have been connected to 30 amp the load meter (Intellilec) displays the amps, but when using 50 amps it doesn’t. Is there something wrong?

Hi Ron & Anna!

I ran your question by our technical service team and here’s their response:

This system looks at the sine waves of the 120VAC power to compare them for phase rotation. Basically, there are two lines of 120VAC in a 50 amp system and one line of 120VAC in a 30 amp system. The Intellitec system will examine the 60Hz frequencies and if there is a single sine wave, it assumes you are on 30 amps, if it sees a double wave, it assumes you are on 50 amps (the precise frequencies are never identical, i.e., 59.9Hz and 60.1Hz). The system will monitor the amp loads when you are operating the coach and it can switch off individual circuits to keep you under the maximum capacity of what you are connected to. It also memorizes how many amps it saved shutting off an individual circuit and will turn it back on when that amount of surplus is regained. It only displays the amp draw for 20 and 30 amp systems and the generator. When on 50, it doesn’t feel it is necessary to provide a constant display of load. Bottom line, there is nothing wrong with their equipment.

I hope that helps, but please let us know if you have any follow up questions!

So if my air& fridge are pulling 20 amps plus TV,fan& occasional microwave it wouldn’t be safe for me to add a mini fridge running full time?

You’ll need to add together the amp load for each appliance you wish to run simultaneously and make this determination. If you know the air and fridge are pulling 20 amps, you MUST know how much the other appliances they named are pulling and don’t simply guess. If the total comes to 25 amps and the mini fridge pulls 8 amps, a 30 amp coach would fail, but a 50 amp coach would be ok.

Let us know if you have any other questions!

Leave Your Comment Cancel Reply

Save my name, email, and website in this browser for the next time I comment.

Shop By RV Type

Your Adventure Awaits

Copyright © 2023 cwi, llc all rights reserved.

• RV Glossary |
• Privacy Policy |
• California Privacy Rights |
• Do Not Sell or Share My Personal Information |
• Targeted Advertising Opt Out |
• Terms of Use

RV Inspection And Care

A NRVIA certified inspector explains how you can inspect and care for your own RV.

A 50 Amp To 30 Amp Adapter – Is It Safe?

This article is about using a 50 amp to 30 amp adapter when you have a 30 amp RV.

In a previous blog post I discussed the possibility of needing to adapt a 30 amp campground service to a 50 amp RV. This is a very common scenario in many campgrounds .

But a less common scenario is just the opposite. And that’s when you need to run a 30 amp RV from a 50 amp campground pedestal.

So can you use a 50 amp to 30 amp adapter safely in this case? Let’s see!

Disclosure: Please note this post may contain affiliate links. This means – at no additional cost to you – I earn a commission if you make a purchase using our affiliate links. I only link to products and companies I use and feel comfortable recommending. The income goes toward supporting the free content on this website.

Why Is An Adapter Needed?

There are a lot of RVs on the road that are wired for a 30 amp electrical service. To understand what this means, it’s good to have a mental picture of what an amp is. And while we are at it let’s also do the same for volts too.

The best analogy I have heard to describe the relationship between amps and volts is to picture a water hose. There are different sizes of water hoses, some big, some small.

For instance, a garden hose will put out a steady stream of water. But a fire hose is much larger and therefore will put out a lot more water at the end.

Volts are like the water pressure that goes into the hose. There has to be some water pressure to move the water along.

But if you have a consistent water pressure, the fire hose will move more water than a garden hose. So in RVs, a 30 amp service is like the garden hose. It moves electricity along to the appliances in the RV.

But a 50 amp RV service can move a lot more electricity at the same time because the wiring is much larger and more capable.

The difference between a 30 amp and a 50 amp RV service becomes especially apparent when using air conditioners . A 30 amp service will usually only allow the operation of one AC unit in the RV.

But a 50 amp service can run more than one AC unit and even provide plenty of extra power at the same time. Why? Let’s take a look at a very useful electrical formula to understand why 50 amp RVs can do that.

A Useful Electrical Formula

The volts at the campground pedestal should remain at 120 volts no matter what RV is plugged into it. So we can determine how much difference there is in consumable power between 30 amps and 50 amps by using a common electrical formula.

It says that you multiply the amps times the total volts. Then you will know the maximum simultaneous power capability of any electrical system (the watts).

So if we multiply 30 amps times 120 volts, a 30 amp RV can consume 3600 watts of power at one time. But a 50 amp RV has two legs of service going into the rig instead of just one.

So if you add the two lines of 120 volts, that is a total of 240 volts. Then multiply that by 50 amps for each line and you have 12,000 watts of consumable power at one time.

Clearly then, a 50 amp RV uses a lot more power than a 30 amp RV. So what happens if you use a 50 amp to 30 amp adapter for your 30 amp RV?

How Does A 50 Amp To 30 Amp Adapter Work?

Since a 30 amp RV has wiring that can only safely handle 30 amps of power, you don’t want to overload it.

If you were to somehow plug the 30 amp RV service into the 50 amp campground pedestal without an adapter, it could easily overload.

So there is a need to step down the power of the 50 amp campground pedestal to the 30 amp RV service.

That is where the adapter comes in. It does that work for you. Even though there is a lot more electrical power available at the pedestal, it restricts the total output.

That means that it steps it down to the power that will not harm your RV or your devices. Think of it as an adapter at the end of the fire hose that steps down the water stream to the size of a garden hose.

Click on the link below to find out more about 50 to 30 amp adapters like this one.

Click here for a 50 amp to 30 amp RV plug adapter

(This is an affiliate link for the product on Amazon. It does not cost you any extra to buy the product using my affiliate link if you choose to do so)

A 30 Amp Plug In A 50 Amp Adapter

As mentioned above, a 50 amp RV outlet has two lines of power instead of just one. And the 30 amp RV plug only uses one line of 120 volt power.

So the 50 amp to 30 amp adapter renders the second line useless. That way only one line of power is coming into the 30 amp RV at that point.

Of course, the remaining 120 volt line of power still has a maximum amperage of 50 amps.

But the 30 amp RV is not capable of using more than 30 amps of power without tripping a panel breaker in the RV.

It’s a safety provision to make sure that you don’t overload the 30 amp wiring in the RV.

So a 50 amp to 30 amp RV adapter should work just fine on its own.

A Failsafe Electrical Protection System

However, there are some who feel that more is needed to make sure that an electrical overload does not happen.

They recommend the use of a 30 amp RV surge protector that is an EMS (electrical management system).

An EMS monitors your electrical line and shuts off power to the RV if it exceeds 30 amps.

So they feel that using the 30 amp surge protector EMS along with the 50 amp to 30 amp adaptor provides the maximum electrical safety possible.

Click here to view a 30 amp surge protector EMS

The choice is yours, but many RVers have used the adaptor alone with very good results.

What does All Of This Mean For Your 30 Amp RV?

So what does this mean in terms of what you usually do with your RV? Does this adapter change the way you use your appliances or devices? Not really.

Since you still have the full 30 amps of power that you always use, nothing will change when you plug into a 50 amp service with an adapter.

On the other hand, RVs with a 50 amp service that plug into a 30 amp receptacle will have to make changes in their power usage. Otherwise, they would easily overload the electrical service and could blow some of the RV panel breakers.

But not those who have a 30 amp RV who plug into a 50 amp pedestal. You don’t get any additional power , but you don’t lose any power either.

I hope this helps you understand how RV electrical services work and how adapters help in special situations. Let us know if you have had any interesting experiences with 50 amp to 30 amp adapters in the comments below.

Have safe and happy travels my friends!

11 thoughts on “A 50 Amp To 30 Amp Adapter – Is It Safe?”

That was an excellent presentation! I have discovered my 30 amp camper performs Better when I plug in a 50 amp to 30 amp converter. Then plug into the camper. I get pure 30 amps into the camper and my electric items Will all work at the same time. Example: AC, hot water heater and coffee pot all Running. When using straight 30 amp from pedestal I had to turn something off to run coffee pot.

That’s an interesting idea Richard. I’m glad it’s working for you. Thanks for mentioning that. It might be something that benefits others having the same issues.

Thanks for the explanation. I am using this tip right now in a time of need—as our 30A connection has failed — and this explanation is really reassuring. It makes sense when you think about it, but it certainly is nice to be hear it from someone with expertise. So far this has been more consistent, and with really cold temps and using electric heaters as much as possible, we are putting a strain on our capacity. So thank you.

i don’t think you get 50 amps on both legs of a 50 amp service. i think you get 20 amps on one leg and 30 amps on the other. I mean if you had 50 amps on both legs why would you need two legs to power a 50 amp trailer? And if you were providing 50 amps on both you would have a 100 amp service. and the bit about doubling the voltage to 240 volts. misleading because nothing in the rv runs on 240 volts. I will give you the 3600 watts for 30 amp service. but adding 20 more amps should only give you 2400 watts more. You doubled your amps and quadrupled your power?

Actually Craig, my article is correct. I know that it may be a little difficult to understand, but there are indeed two lines of 50 amps coming into the RV at the same time. Both are operating on 120 volts. So, one leg is capable of handling 6000 watts of power (50 amps X 120 volts) and the other leg is capable of doing the same. That means that a 50 amp RV service can provide up to 12,000 watts of simultaneous power to the rig. Here is a link to an RV electrical expert who explains the whole matter in even greater detail – https://www.rvtravel.com/rv-electricity-power-principals-50-amp-shore-power/

Thank you for a very informative article. I am just getting interested in the RV lifestyle and I hope to indulge myself when I retire in a couple of years. In the meantime I am trying to do as much research as I can to learn. This article is very well written and easy to understand for a newbie.

Thanks again.

Hi Steve. I’m so happy that the article was helpful. A lot of RVers have questions about electrical issues. And you are doing exactly what you need to do by getting as much information in advance as possible. It will shorten your learning curve dramatically when you actually start RVing. I wish you fun adventures and happy travels on the road ahead!

Excellent Info…thanks for confirming what I thought to be the case and assuring my usage of the power options.

I’m glad you enjoyed the article. Have safe and happy travels!

Excellent and Simple to understand!!! Thank you! I build houses for a living and understand a lot about electricity. But I am a new, first time, RV Camper owner and don’t know a lot about camper wiring. I like to remind myself that “I don’t know what I don’t know” and thought I would look up some info and came across your article. You explained this and gave additional information that made me feel completely confident when done reading. Thanks!

Hi Ron. Thanks for leaving some positive feedback on this article. It’s much appreciated and I’m glad that you found the information helpful!

Leave a Reply Cancel reply

Your email address will not be published. Required fields are marked *

Save my name, email, and website in this browser for the next time I comment.

Get My FREE Camping Guide

“The Top 5 Ways To Save Money On Campground Costs”

Get My Newsletter

Save on RV repairs

Get the best RV gear

Learn about RV life

RV tips and tricks

And get my free guide – “ The Top 5 Ways To Save Money On Campground Costs”

• Types Of RVs
• Tow Vehicles
• Maintenance & Repairs
• RV Power & Electrical Supplies
• RV Appliances
• Living In An RV
• Travel & Destinations
• RV Gear Buyer’s Guides

Can I Plug My 30 Amp RV Into A 50 Amp Adapter Safely?

• Last Updated: February 15, 2024
• 9 minutes read

Planning your RV trip is sometimes half the fun. Figuring out what things you want to do and deciding where to stay can help take your trip to the next level.

Yet you might not always be able to find exactly the power needs that perfectly fit your RV’s amp rating.

If RV campsites are in short supply, or you’re on the go looking for a place to stay on short notice, You might be wondering, “Can I plug my 30 amp RV Into a 50 amp shore power?  

Yes, you can indeed safely plug your 30 amp RV into a 50 amp socket, you don’t have to worry about dealing with a long night without power. However, you do need to make sure that you have 120 volt 50 amp male plug on the male end and a 120 volt 30 amp female socket. You just take the 30 amp cord from your RV and plug it into the female socket on the adaptor. Once it’s seated snugly, you plug the male end of the adaptor into RV park’s 50 amp shore power socket.

How Does A 30 Amp Adapter Work?

These adapters typically come with a 120 Volt, 50 Amp male plug on one endwith a 120 Volt, 30 Amp female socket.

To use it you take the 30 Amp cord that runs from your RV or motorhome and then plug it into the female’s adapter socket.

You then plug the male end of the adaptor into the 50 Amp socket provided by the RV park.

If you do this in reverse order and the power is already active on the electrical post, you could risk blowing a fuse at some point in the system.

What Is The Difference Between A 50 Amp And A 30 Amp Outlet?              

The main reason you can’t plug a 30 Amp into a 50 Amp, and vice versa is the starts with the physical differences between the two.

However, they also provide electricity in different ways.

A typical 30 amp plug features three prongs which include a 120 Volt“Hot Wire” which carries current, along with a neutral prong, and a ground wire.

Most RVs with low power requirements are set up fora 30 Amps system.

If you take a close look at a 50 Amp plug,you will see four prongs which include a pair of 120 Volt “Hot Wires” along with a neutral prong and a ground wire.

This configuration provides two separate 50 Amp 120 Volt electric lines to accommodate an RV with higher power needs.

In many cases, a 50 Amp system is necessary to handle the needs of running a large RV air conditioner and popular appliances, all at the same time.

Read Next: Difference Between A 30 Amp And A 50 Amp RV Electrical Outlet

Can I Plug My 30 Amp RV Into A 50 Amp Outlet?

The short answer here is that you can indeed access the power of a 30 Amp Outlet for an RV with a 50 Amp set up. However, you will again need a special adapter.

These adapters are a little harder to come by, but not impossible. You are more likely to find them in a large automotive store or electrical hardware section than you are to find them at a discount retail outlet.

A quick internet search for the closest auto parts store will save you a lot of time beating the bushes for a 30 Amp to 50 Amp adapter .

If you are at the RV campground and they have one in the store for a couple of bucks more than at a distant auto parts store, it’s probably worth it to invest in one. You’ll end up saving yourself the money in fuel cost anyway.

Now, you shouldn’t just buy the adapter and expect everything to work perfectly. As before you will need to plug the adapter into the RV first before connecting to the live power post.

While the adapter will provide you with electricity it will only be at a maximum of 3,600 Watts.

When you consider that 50 Amp systems can typically handle up to 12,000 Watts, it could be a bit of a drawback.

This is one of those times to introduce your kids to the real-life lesson of conserving power.

At 3,600 Watts, you might be able to run your RV’s air conditioner on low, with some basic lights, and maybe the odd phone charger.

Where Can I Buy A 50 Amp Adapter Plug?

There are some well-established RV parks that are aware of just how common this problem is.

Many will have a cantina or a park store with basic items including 30 Amp to 50 Amp adaptors as well as  50 amp to 30 Amp adapters .

Yet just like a log of the things they sell, there’s usually a stiff markup on the cost.

If you don’t already have one of these adapters in your RV’s glove box, and you should, they are for sale in other stores. Most box retailer hardware stores have them available.

There are even a few discount stores that maintain a small selection of RV adapters in their automotive area.

Tips For Making The Most Of A 30 Amp Power Supply On A 50 Amp RV

As you might imagine, there are a few things you can do to minimize the inconvenience of the decreased level of available power.

1: Use One Air Conditioner Instead Of Two

Large motorhomes and fifth wheels often have two air conditioner systems. These tend to be the biggest power draw in the RV. 

If at all possible, try to run only one of them to keep things comfortable.

2: Run The Generator

If you have a large RV or motorhome, then chances are it also has its own onboard generator that is rated to handle the standard power draw.

The system is technically set up to run while you are plugged into the shore power or an electric post.

However, many RV parks have rules about when you can run generators. Especially, loud two-stroke generators.

Some request that you  stop running your generator after 9:00 pm . If their park covenants allow you to run up to a reasonable hour, you could use the time to pump your air conditioning up to the max, for a few hours before going to bed.

3: Run Your RV Fridge Off Propane

Most so-called “Two Way” RV refrigerators are what are known as “Absorption Refrigerators.” Instead of using compressed freon like the refrigerator in your kitchen, they use a blend of special fluids and gasses to replicate an evaporation effect.

This means you can technically run them off propane or electricity. Setting the RV fridge over to run on propane , will save you a little bit of electric power draw from the weaker system.

4: Cut Back On Appliances That Draw A Lot Of Power

Hairdryers, clothes driers, and other appliances that need a Ground Fault Circuit Interrupter (GFCI) draw a lot of power.

This means they could start to compete for power with the air conditioner and other onboard appliances.

5: Use The RV Park’s Shower Facilities

If your RV has a shower, then it also likely means that it has a water heater.

If you have multiple people who need to take a shower, or there is someone who likes to take long showers, it might be a good idea to use the RV park’s shower facilities. 

This will spare your water heater competing with the air conditioner for power. It will also reduce the amount of humidity produced by the shower, which the AC will have to deal with.

Which One Is Better A 30 Amp Or A 50 Amp RV?

The answer to this question varies depending on how just how much shore power you intend to use when you are plugged in at the RV Park.

This will require taking out a pen and paper to do a little math. Calculating the necessary wattage and converting it to Amp requirements means multiplying by the voltage.

For example:

• A 20 Amp system x 120 Volts = 2,400 Watts
• A 30 Amp system x 120 Volts = 3,600 Watts
• A 50 Amp system X 120 Volts = 6,000 Watts

In the case of a 50 Amp shore power outlet, you have a pair of 50 Amp conductors, which means you essentially have access to 12,000 Watts available to use.

Taken in this context it’s a bit of a misnomer and should really be called a 100 Amp plug.

How Do I Know How Much Power My RV Needs?

Using your 30 Amp or 50 Amp power system as a guideline, you can start dialing in your wattage needs for each RV appliance, as well as the air conditioner.

You can start to build a picture of how many Watts you’ll need by checking each appliance.

Most have their power consumption information stamped into the bottom or on a small printed metal plate on the back.

Write them up on a list and then try to get a picture of how and when you will be using them. When adding them all up you want the wattage total to be  below 80% of the system’s load capacity .

Your RV’s electric breaker box is set up to handle 80% load capacity. Anytime you go over that number, you risk tripping a circuit breaker, or blowing a fuse.

What’s The Average Wattage Range For Common RV Appliances?

Some RV appliance manufacturers are lax about stamping or printing energy information on the units they sell. 

If you don’t happen to have the user manual at hand, you can use the following information to get an idea of the average wattage of some common RV appliances.

• A small LED TV averages around 50 Watts.
• A 15” laptop uses around 100 Watts.
• A basic four-slice toaster using about 1,500 Watts.
• RV LED lights use around 5 Watts per fixture.
• A basic hair dryer draws around 1,500 watts.
• A coffee maker draws around 1750 Watts when brewing.
• An electric frying pan draws around 1300 Watts when set on high.
• A microwave oven uses around 625 Watts but requires around 800 Watts at start-up.
• An electric refrigerator uses around 700 Watts when running on only electricity.

Some of these heat-producing appliances draw can draw nearly half of the available wattage for a 30 Amp RV system.

This means you will need to be thoughtful about when and how you use some of them with other appliances. 

If your RV comes with Ground Fault Circuit Interrupters (GFCI) outlets, it’s a good idea to plug these high draw appliances into them.

Should the given appliance’s power draw exceed the allowed limit, the GFCI is more likely to trip, thus sparing you a trip to the breaker box.

What If I Want To Connect My 30 Amp RV To My Home?

Just because you aren’t on the road, doesn’t mean your RV has to go unused. If you have kids, who want to host a sleepover or company coming for a visit the RV might be a great place to set them up for the night.

It could also be a place where you can go for a moment’s peace, or read a good book.

In these scenarios, you will want to have electric power available in the RV, without having to necessarily run the generator.

Rather than play with this kind of power yourself, you should contact a licensed and bonded professional electrician.

For a very reasonable price, they can install a power post, pedestal, or other connection that allows you to run your RV off your home’s power.

About Author / Aaron Richardson

Aaron Richardson is an expert RVer and the co-founder of RVing Know How. Aaron, along with his wife Evelyn, has been living and traveling in their Keystone Fuzion RV since 2017. Their adventures span across the country and beyond, including memorable RVing experiences in Mexico. Aaron's passion for the outdoors and RVing shines through in his writings, where he shares a blend of travel stories, practical tips, and insights to enhance the RV lifestyle.

What size generator do I need for my RV?

F-150 towing capacity: what size travel trailer can a f-150 pull.

Kurt Belyeu

Using a cable rated for 30 amps will have conductors sized for 30 amps. The problem is you are using a dogbone to utilize a single leg of a 50 amp breaker which is a code violation due to the breaker being oversized for the conductors.

Stephen Willis

the 30a breaker in your rv will protect your wiring

Rick Hoogkamp

The 30 amp breaker in rv protects the internal wiring but that does NOT protect undersized wiring from the pedestal plug through 30amp surge protector and thr rv cord into the rv distribution panel. I have seen numerous rv’s plugged into 50/60 amp double pole receptacles with 30 amp adapter that have burned up surge protectors and the 30 amp plug connectors. The last one melted connections in the junction box where the cable connects to fifth wheel internal wiring- almost starting rv on fire. This is on line side of 30 amp internal breaker which does nothing to protect that incoming wiring.

I have made an adapter box with a 50 amp male plug and 30 amp female plug that has an internal 30 amp breaker so that this eliminates this hazard- it is a ode violation to protect30 amp wiring with a larger 50/60 amp breaker. This practice could cost someone their RV or possibly their life and should be STOPPED,

Leave a Comment Cancel reply

Your email address will not be published.

Save my name, email, and website in this browser for the next time I comment.

You Might Also Like

The Ultimate Guide to Choosing the Best RV Toilets for Optimal Comfort and Efficiency

How To Install A Tankless Water Heater In An RV (Step by Step Guide)

The Top 12 Travel Trailer Brands Of 2024

Start typing and press Enter to search

• Write For Us
• Become An Ambassador
• Advertise With Us
• Affiliate Program
• Member Support
• Member Login

Camping Blog & News

Step-by-step instructions for upgrading your rv from 30 amp to 50 amp.

SPECIAL OFFER JUST FOR YOU! Use promo code e3teamvip to get 25% off ANY membership!

In an era where RV travel is increasingly popular, ensuring your motorhome is equipped to handle modern electrical demands is paramount. In the article “Step-by-Step Instructions for Upgrading Your RV from 30 amp to 50 amp,” embark on a journey of empowerment as we guide you through the process of enhancing your RV’s electrical capacity. From understanding the intricacies of amperage to expert tips on safely executing the upgrade, this comprehensive guide offers invaluable insights for RV enthusiasts seeking to adapt to evolving power needs and enhance their on-the-road experience. Whether you’re a seasoned traveler or a novice adventurer, prepare to elevate your RV lifestyle with confidence and ease.

Here’s an overview:

• Understanding the Differences Between 30 Amp and 50 Amp Systems

Assessing Your RV’s Electrical System and Compatibility for the Upgrade

• Gathering the Necessary Tools and Equipment
• Shutting off Power and Ensuring Safety Measures
• Installing the New 50 Amp Power Inlet

Step 1: Determine the circuit breaker size

Step 2: shut off the power, step 3: remove the old circuit breaker, step 4: install the new 50 amp circuit breaker, step 5: upgrade the wiring, step 6: test the system.

• Testing and Troubleshooting the Upgraded System

1. Surge Protector

2. energy management system, 3. battery monitoring system, 4. solar panels, 5. led lighting, 6. efficient appliances, consulting with a professional electrician for complex installations, tips for maintaining and maximizing the performance of your upgraded rv electrical system, understanding the differences between 30 amp and 50 amp rv systems.

When it comes to RV electrical systems, there are two common options: a 30 amp system and a 50 amp system. Understanding the differences between these two systems is crucial for anyone considering upgrading their RV from a 30 amp to a 50 amp system. Here’s a breakdown of the key differences between the two:

• Amperage Capacity: The main difference between a 30 amp system and a 50 amp system lies in their amperage capacity. A 30 amp system can handle a maximum load of 30 amps, while a 50 amp system can handle up to 50 amps. This means that a 50 amp system has a greater capacity to power more appliances and electrical devices simultaneously.
• Power Distribution: RVs with a 30 amp system typically have a single air conditioning unit and fewer electrical appliances. The 30 amp system is designed to distribute power to these appliances adequately. On the other hand, a 50 amp system is equipped to handle two air conditioning units and a higher number of electrical appliances. The extra capacity allows for more power-hungry appliances to operate simultaneously without overloading the system.
• Electrical Outlets: Another difference between the two systems lies in the type of electrical outlets they use. A 30 amp system utilizes a three-pronged plug, while a 50 amp system uses a four-pronged plug. The additional prong in the 50 amp plug allows for the transmission of more power, accommodating the higher amperage capacity of the system.
• Wiring and Breaker Size: The wiring and breaker size are also factors that differentiate the 30 amp and 50 amp systems. A 30 amp system typically uses a 10-gauge wire, while a 50 amp system requires 6-gauge wire. The breaker size for a 30 amp system is usually 30 amps, while a 50 amp system generally uses a 50-amp breaker. Upgrading from a 30 amp to a 50 amp system may require rewiring and installing larger breakers to accommodate the increased power load.
• Compatibility: It’s important to note that not all RVs can be easily upgraded from a 30 amp to a 50 amp system. RVs must have the necessary wiring and breaker capacity to handle the increased power load. Before attempting an upgrade, it’s advisable to consult an electrician or RV technician to determine if your RV can support a 50 amp system safely.

Understanding the differences between 30 amp and 50 amp systems is essential when considering an RV upgrade. By knowing the capacities, power distribution, electrical outlets, wiring, and breaker sizes of each system, RV owners can make informed decisions about upgrading their electrical system to better suit their power needs.

Before proceeding with the upgrade from a 30 amp to a 50 amp electrical system in your RV, it is important to assess your current electrical setup and determine its compatibility for the upgrade. This will ensure that the process goes smoothly and that your RV can safely accommodate the higher power capacity.

Here are the steps to follow when assessing your RV’s electrical system:

• Review your RV’s specifications : Firstly, refer to the owner’s manual or consult the manufacturer to understand the electrical specifications of your RV. This will provide you with important information such as the current electrical capacity, the type of electrical connection (30 amp or 50 amp), and any specific requirements for the upgrade.
• Inspect your RV’s power cord : Examine your RV’s power cord to identify its plug type and determine whether it is a 30 amp or 50 amp connection. The 30 amp plug typically has three prongs, while the 50 amp plug has four prongs. If you have a 30 amp plug, upgrading to a 50 amp system may require replacing the power cord and installing a new 50 amp receptacle.
• Check your RV’s circuit breaker panel : Locate your RV’s circuit breaker panel, which is usually housed in a cabinet or compartment. Take note of the existing circuit breakers and their amperage ratings. A 30 amp system typically has one main breaker rated at 30 amps, while a 50 amp system will have two main breakers, each rated at 50 amps.
• Inspect your RV’s wiring : Carefully examine the wiring throughout your RV to ensure it is in good condition and capable of handling the increased electrical load. Look for any signs of wear, damage, or loose connections. If you notice any issues, it is important to address them before proceeding with the upgrade.
• Consider additional electrical components : Assess whether your RV has any additional electrical components that may need to be upgraded for compatibility with a 50 amp system. This may include appliances, air conditioners, or other devices that draw a significant amount of power. Consult the manufacturer’s specifications for each component to determine their compatibility with a 50 amp system.

By thoroughly assessing your RV’s electrical system and compatibility, you will have a clearer understanding of the steps required to complete the upgrade. If you are unsure or unfamiliar with electrical work, it is recommended to consult a professional electrician who specializes in RV electrical systems to ensure the upgrade is done safely and correctly.

Gathering the Necessary Tools and Equipment To Upgrade Your RV 30 Amp to 50 Amp

Before beginning the process of upgrading your RV from 30 amp to 50 amp, it is important to gather all the necessary tools and equipment. Having everything on hand will ensure a smooth and efficient upgrade. Here are the essential tools and equipment you will need:

• Multimeter : A multimeter is an indispensable tool for any electrical work. It measures voltage, current, and resistance, which will be crucial in determining the proper connections and troubleshooting any issues that may arise during the upgrade process.
• Wire Strippers : Wire strippers are used to remove the insulated coating from the wires. They make the process of connecting and disconnecting wires much easier and ensure a clean and secure connection.
• Crimping Tool : A crimping tool is necessary for securely attaching terminals or connectors to the wires. It provides a strong and reliable connection, preventing any loose or frayed connections that could lead to electrical issues.
• Electric Drill : An electric drill with various drill bits will come in handy when creating holes for new wiring or mounting brackets. Make sure you have a range of drill bit sizes to accommodate different needs.
• Electrical Tape : Electrical tape is used to insulate and protect exposed electrical connections. It prevents the risk of electrical shock and helps maintain the integrity of the wiring.
• Cable Cutters : Cable cutters are essential for cleanly cutting through heavy-duty electrical cables. They make the process quick and precise, ensuring neat and secure connections.
• Wire Connectors : Various wire connectors, such as butt connectors, ring terminals, and spade connectors, will be needed for making connections between wires. These connectors provide a secure and reliable connection that is essential for safe and efficient electrical distribution.
• 50 amp RV Power Cord : The 50 amp RV power cord is the main component of the upgrade. It is designed to handle the increased power load and provide a reliable connection between the RV and the power source.
• Mounting Brackets : Mounting brackets are required for securing the new 50 amp outlet receptacle. They provide stability and ensure that the outlet is securely attached to the RV.
• Screwdrivers : A set of screwdrivers with different sizes and types (such as Phillips and flathead) will be necessary for loosening and tightening electrical connections, as well as removing screws for mounting brackets.
• Safety Equipment : Don’t forget to gather essential safety equipment such as safety goggles, gloves, and a fire extinguisher. These items will ensure your safety during the upgrade process.

By gathering all the necessary tools and equipment before you begin the upgrade, you will save time and effort. Having everything readily available will enable you to work efficiently, resulting in a successful and safe RV upgrade.

Shutting off Power and Ensuring Safety Measures When Upgrading 30 Amp to 50 Amp

Before beginning any electrical work on your RV, it is essential to shut off the power supply and take necessary safety measures. This will help prevent accidents and ensure your personal safety throughout the upgrading process.

• Disconnect from the Shore Power:  The first step is to disconnect your RV from the shore power source. This will ensure that no electricity is flowing through the system while you work on it. Locate the shore power connection on the exterior of your RV and unplug it.
• Turn Off the Main Breaker:  Once you have disconnected from the shore power, locate the main breaker panel inside your RV. This is usually mounted on the wall or in a utility compartment. Carefully open the panel and find the main breaker switch. Flip the switch to the “off” position. This will shut off the power supply from the RV’s internal electrical system.
• Wear Protective Gear:  Before starting any electrical work, it is important to protect yourself by wearing appropriate gear. Safety glasses and gloves should be worn to protect your eyes and hands from potential hazards.
• Use a Voltage Tester:  To further ensure safety, it is recommended to use a voltage tester to check for any remaining electrical current in the system. Test each outlet and electrical component to verify that there is no voltage present. If the tester indicates voltage, double-check your power sources and breaker switches to ensure they are properly shut off.
• Secure the Electrical Equipment:  As you work on upgrading your RV from 30 amp to 50 amp, be mindful of any loose electrical wires or equipment. Secure any loose connections or wiring to prevent accidental contact or damage during the process.
• Follow Proper Wiring Procedures:  When upgrading to a 50 amp system, it is crucial to follow proper wiring procedures. Adhere to the manufacturer’s instructions and guidelines for your specific RV model. If you are unsure about any steps or procedures, consult a professional electrician to ensure proper installation and safety.

In summary, shutting off the power and ensuring safety measures are crucial steps when upgrading your RV from 30 amp to 50 amp. By disconnecting from the shore power, turning off the main breaker, wearing protective gear, using a voltage tester, securing the electrical equipment, and following proper wiring procedures, you can ensure a safe and successful upgrade for your RV’s electrical system.

Installing the New 50 Amp Power Inlet In Your RV

Upgrading your RV from a 30 amp to a 50 amp power system will require installing a new power inlet to accommodate the higher amperage. This process may seem intimidating, but by following these step-by-step instructions, you can easily and safely complete the installation.

• Safety first:  Before beginning any electrical work, always ensure the power source is disconnected. This includes unplugging the RV from the shore power and shutting off the circuit breaker at the main electrical panel.
• Choose the right power inlet:  Select a 50 amp power inlet that is compatible with your RV’s electrical system and fits the designated space on the exterior of your vehicle. It is recommended to consult your RV’s manual or consult with a professional to ensure you choose the correct inlet.
• Locate the installation point:  Determine the optimal location for the new power inlet on the exterior of your RV. It should be easily accessible and have enough clearance to connect the power cord without any obstructions.
• Prepare the installation area:  Clean the installation area to remove any dirt or debris that could interfere with the installation process. If necessary, use a drill and appropriate drill bit to create a hole for mounting the power inlet.
• Mount the power inlet:  Attach the power inlet to the exterior of your RV using the provided screws or mounting hardware. Make sure it is securely fastened to prevent any movement or damage during use.
• Connect the wiring:  Follow the manufacturer’s instructions to properly connect the wiring to the power inlet. This typically involves connecting the incoming power supply wires to the appropriate terminals and ensuring a tight and secure connection.
• Grounding the power inlet:  The power inlet must also be properly grounded to ensure safety. Connect the grounding wire to the designated grounding terminal on the power inlet, making sure it is securely fastened.
• Double-check the connections:  Once the wiring and grounding are complete, double-check all connections to ensure they are secure and properly tightened. Inspect the wiring for any signs of damage or wear.
• Test the installation:  Before re-applying power, it is essential to test the installation to ensure everything is functioning correctly. Turn on the circuit breaker at the main electrical panel and plug in the RV’s power cord to the new 50 amp power inlet. Verify that power is successfully flowing to the RV and check for any abnormal sounds, smells, or sparks.

Once you have completed the installation and everything is working properly, you can confidently enjoy the benefits of the upgraded 50 amp power system in your RV. Remember to always follow safety precautions and consult a professional if you are unsure or uncomfortable with any aspect of the installation process.

Upgrading the Circuit Breaker and Wiring In Your RV

One of the key steps in upgrading an RV from 30 amp to 50 amp is to upgrade the circuit breaker and wiring. This is necessary because a 50 amp system requires higher capacity to handle the increased electrical load.

The first step is to determine the size of the circuit breaker needed for the 50 amp system. This can be done by checking the electrical panel or consulting the RV manufacturer’s specifications. It is important to ensure that the circuit breaker is sized correctly to avoid overloading the electrical system.

Before starting any work on the electrical system, it is crucial to shut off the power to the RV. This can be done by disconnecting the RV from the power source or turning off the circuit breaker that supplies power to the RV.

Once the power is turned off, the next step is to remove the old 30 amp circuit breaker. This can usually be done by unscrewing the mounting screws and disconnecting the wires from the terminals. It is recommended to label the wires or take a picture before disconnecting to ensure proper reconnection later.

After removing the old circuit breaker, the new 50 amp circuit breaker can be installed. This involves connecting the incoming power wires to the appropriate terminals and securing the breaker to the electrical panel using the mounting screws.

In addition to upgrading the circuit breaker, it is crucial to upgrade the wiring to accommodate the higher amperage of the 50 amp system. This may involve running new wires from the electrical panel to the RV’s power distribution system. It is recommended to use high-quality wiring that is rated for 50 amps to ensure safety and performance.

Once the circuit breaker and wiring upgrades are complete, it is essential to test the system to ensure everything is working correctly. This can be done by reconnecting the RV to the power source and checking for any issues such as tripped breakers or faulty connections. It is also advisable to consult a qualified electrician or RV technician to perform a thorough inspection and ensure compliance with electrical codes.

Upgrading the circuit breaker and wiring is a critical step in upgrading an RV from 30 amp to 50 amp. By following the proper procedures and guidelines, RV owners can ensure a safe and reliable electrical system that can handle the increased power demands of a 50 amp system.

Testing and Troubleshooting the Upgraded System In Your RV

After completing the upgrade from a 30 amp to a 50 amp system in your RV, it is important to properly test and troubleshoot the new setup to ensure everything is functioning as expected. This step is crucial for identifying any potential issues or malfunctions and addressing them promptly.

Here are some recommended steps to follow when testing and troubleshooting the upgraded system:

• Check power supply : Start by verifying that you have a proper power supply connection to your RV. Ensure that the incoming power source, such as a campground pedestal or generator, is providing the correct voltage and frequency for a 50 amp system. Use a multimeter to measure the voltage and ensure it matches with the specifications of your RV.
• Inspect wiring connections : Carefully inspect all the wiring connections made during the upgrade process. Ensure that all connections are secure and tight, and there are no loose wires or exposed connections. Loose or faulty connections can lead to power fluctuations or electrical hazards. Pay special attention to the connections at the main breaker panel and the transfer switch.
• Perform load testing : Connect various appliances and electrical devices to the upgraded system and test their functionality. Start with low-demand devices such as lights and gradually add higher-demand appliances like air conditioners, heaters, and kitchen appliances. This will help you assess the system’s capability to handle increased power requirements and identify any overload issues.
• Monitor voltage and amperage : While testing different devices, use a digital multimeter or an onboard power monitoring system to measure the voltage and amperage levels. Ensure that the voltage remains within the acceptable range and that the amperage does not exceed the capacity of your new 50 amp system. If you notice any significant fluctuations or abnormalities, it may indicate a problem with the wiring or the electrical components.
• Check for hot spots : Use a thermal imaging camera or a non-contact infrared thermometer to detect any hot spots along the wiring or electrical components. Overheating can be an indication of an underlying issue such as a loose connection or an overloaded circuit. If you notice any hot spots, investigate further and address the problem promptly to prevent potential damage or safety hazards.
• Test the transfer switch : The transfer switch is responsible for switching between the external power source and the onboard generator, if applicable. Test the transfer switch by connecting the RV to the external power source and then initiating a transfer to the generator. Ensure that the transfer switch operates smoothly and that power is being supplied seamlessly. Any malfunctions or delays in the transfer process should be investigated and resolved.
• Verify proper grounding : Finally, check the grounding of your upgraded system to ensure it meets the necessary safety standards. Verify that the grounding conductor is connected securely and that it is properly bonded to the main electrical panel. A solid grounding connection is essential for protecting your RV’s electrical system and preventing electrical shocks or fires.

By following these testing and troubleshooting steps, you can ensure that your upgraded RV electrical system is functioning correctly and safely. It is important to address any issues or abnormalities promptly to prevent further damage and ensure a smooth operation of the 50 amp system. If you are unsure about any aspect of the testing or troubleshooting process, it is recommended to consult a professional electrician or RV technician for assistance.

Considering Additional Upgrades for Optimal Power Management In Your RV

Once you have successfully upgraded your RV from a 30 amp to a 50 amp electrical system, you may want to consider additional upgrades for optimal power management. These upgrades can help ensure your RV runs smoothly and efficiently, especially when you are using multiple appliances or running power-hungry devices.

Investing in a good quality surge protector is essential to protect your RV’s electrical system from power surges or voltage fluctuations. A surge protector will monitor the incoming power and cut off the supply in case of any irregularities or dangerous voltage spikes. This can prevent damage to your appliances and electrical system, saving you from costly repairs in the long run.

An energy management system can help you keep track of your RV’s power usage and manage it efficiently. These systems often come with a display panel that shows you real-time information about your power consumption, voltage levels, and other important data. With an energy management system, you can monitor and control your energy consumption, allowing you to make adjustments and save energy where possible.

If your RV has a battery bank, installing a battery monitoring system can be beneficial. This system provides you with important information about your batteries, such as their voltage, temperature, and state of charge. This allows you to keep track of your battery’s health and performance, ensuring they are always in optimal condition. Additionally, a battery monitoring system can provide early warnings of potential battery issues, helping you address them before they become a larger problem.

Consider installing solar panels on your RV to harness the power of the sun and reduce your reliance on traditional power sources. Solar panels can generate electricity during the day, recharging your batteries and powering your RV’s electrical system. This can be especially useful when you are boondocking or camping in remote areas with limited access to power hookups. Installing solar panels can help you save on energy costs and make your RV more eco-friendly.

Replacing your RV’s traditional incandescent lights with LED lights can significantly reduce your power consumption. LED lights are more energy-efficient and have a longer lifespan than traditional bulbs. By upgrading to LED lighting, you can save on electricity and reduce the strain on your RV’s electrical system.

Consider upgrading your appliances to more energy-efficient models. Energy-efficient appliances consume less power, reducing your overall energy consumption. Look for appliances with the Energy Star label or similar certifications, as they meet strict energy efficiency guidelines. Upgrading to energy-efficient appliances can not only help you save on energy costs but also improve the overall functionality and performance of your RV.

By considering these additional upgrades for optimal power management, you can enhance the efficiency and functionality of your RV’s electrical system. These upgrades can help you save on energy costs, extend the lifespan of your appliances and batteries, and ensure a more enjoyable and hassle-free RVing experience.

When it comes to upgrading your RV from a 30 amp to a 50 amp system, it’s important to note that this is a complex task that requires extensive knowledge and expertise in electrical systems. While some DIY enthusiasts may feel confident in their abilities to tackle such a project on their own, it is highly recommended to consult with a professional electrician before proceeding.

A professional electrician will have the necessary skills and experience to assess your RV’s electrical system and advise you on the best course of action for the upgrade. They can help determine if your current electrical wiring and components are compatible with a 50 amp system, or if any modifications or upgrades are needed.

One of the main reasons to consult with a professional electrician is that they will ensure the installation is done safely and up to code. Electrical work can be hazardous if not done correctly, and working with higher amperage systems requires special precautions and expertise. A professional electrician will have the knowledge of local electrical codes and regulations and ensure that the installation meets these standards.

Another benefit of consulting with an electrician is that they can provide guidance on selecting the appropriate equipment for the upgrade. They will assess your power needs and recommend the right components, such as a 50 amp circuit breaker, wiring, and outlets, based on your specific RV and usage requirements. This will help ensure that your RV’s electrical system can handle the increased power demand without any issues.

Additionally, an electrician can help troubleshoot any potential problems that may arise during the installation process. They have the expertise to identify and resolve electrical issues and can provide solutions to any technical challenges that may come up. This can save you time and frustration and ensure that the upgrade is completed efficiently.

In summary, consulting with a professional electrician is crucial when it comes to complex installations like upgrading your RV from 30 amp to 50 amp. They will provide expert guidance, ensure safety and compliance with electrical codes, help select the right equipment, and troubleshoot any issues that may arise. This will ultimately result in a successful and reliable upgraded electrical system for your RV.

Once you have successfully upgraded your RV from 30 amp to 50 amp, it is important to take certain steps to ensure that your electrical system is properly maintained and that you are maximizing its performance. Here are some valuable tips to keep in mind:

• Regularly inspect your electrical system : It is crucial to inspect your upgraded RV electrical system periodically to identify any potential issues or signs of wear and tear. Check for loose connections, frayed wiring, or any other visible damage. Fixing any problems early on can help prevent more significant issues down the line.
• Keep your electrical system clean : Keep the area around your electrical system clean and free from dust or debris. Regularly clean the connectors and terminals to ensure optimal conductivity. This will help prevent any buildup or corrosion that can interfere with the performance of your electrical system.
• Manage your power load : With a 50 amp electrical system, you have the benefit of increased power capacity. However, it is important to ensure that you are not overloading the system. Be mindful of the total power demands of your appliances and equipment. Distribute the power load evenly and consider using power management devices if necessary.
• Use high-quality electrical components : Invest in high-quality electrical components such as power cords, adapters, surge protectors, and circuit breakers. These components play a crucial role in maintaining the safety and performance of your upgraded electrical system. Choose products that are specifically designed for use in RVs and have a good reputation for reliability.
• Practice electrical safety : Electrical safety should be a top priority when using your upgraded RV electrical system. Always follow the manufacturer’s instructions for your electrical components and equipment. Properly ground your RV and use surge protectors to guard against power surges. If you are not confident in your electrical knowledge, consider consulting a professional electrician for assistance.
• Educate yourself : Take the time to educate yourself about your upgraded RV electrical system. Understand how it works, the different components involved, and how to troubleshoot common problems. This knowledge will not only enable you to maintain and maximize its performance but also help you identify potential issues and address them promptly.
• Keep spare parts and tools handy : It’s a good idea to keep spare electrical parts and tools in your RV for emergency situations. This may include extra fuses, circuit breakers, connectors, and wire crimping tools. Being prepared means you can quickly address any electrical issues that arise when you’re on the road.

By following these tips, you can ensure that your upgraded RV electrical system remains reliable, efficient, and safe. Proper maintenance and responsible power usage will help extend the lifespan of your equipment and provide you with a worry-free RVing experience.

Join the E3 Camping Membership today and become a part of a vibrant community that shares your passion for RV adventure. Together, we can make your dreams of RVing and camping a reality, while embracing the spirit of empowerment. When you sign up, you get instant access to our magazines, 200+ lessons and courses to be a better camper and RVer, tools, product discounts, events, a HUGE community of campers and RVers around the country, E3TV episodes, articles, and many other amazing things.

Join Now! |  Member Login

Join VTOMAN VIP To Get $30 Off Code:VNEW

Free Shipping to U.S.

30-Amp vs. 50-Amp Service: What Are the Differences?

Table of Contents

30-Amp vs. 50-Amp RV Service

Can a 30-amp rv be connected to a 50-amp port, how do i know if my rv is equipped for a 30-amp or 50-amp service, can a 50-amp rv be hooked up to a 30-amp port, can i plug my rv into a 15-amp home electric outlet, do i need an adapter to connect an rv to a generator, do i need a surge protector for rv service, the bottom line.

When managing power needs for recreational vehicles (RVs), it is crucial to understand the differences between 30-amp and 50-amp electrical services. These distinctions are not only about capacity; they shape what appliances you can operate in your RV and how you manage your overall energy consumption. This article delves into the specific characteristics of 30-amp versus 50-amp services, highlighting their impact on RV connectivity, the need for adapters in various setups, and how these factors contribute to a safe and efficient RV experience.

When comparing 30-amp and 50-amp RV services, it's important to understand their key specifications and how they impact the functionality of an RV.

Electrical Capacity:

• 30-Amp Service : Provides electricity through a single 120-volt line. Maximum power output is 3,600 watts, which is adequate for running basic RV functions like lighting, charging small devices, and operating one major appliance such as an air conditioner or a small heater independently of other high-demand devices.
• 50-Amp Service : Delivers power via a 240-volt supply, split into two 120-volt lines, for a total output of up to 12,000 watts. This capacity supports simultaneous use of multiple high-demand appliances, including dual air conditioning units, large electric heaters, and high-powered kitchen appliances.

Outlet Configuration:

• 30-Amp Outlets : These outlets accommodate a three-prong plug configured with one 120-volt hot wire, one neutral wire, and one ground wire. The plug shape is typically cylindrical and less complex, making it distinguishable.
• 50-Amp Outlets : Equipped with a four-prong plug that includes two 120-volt hot wires, one neutral wire, and one ground wire. The design allows for the handling of 240 volts, evident in its larger size and more intricate geometric plug shape.
• 30-Amp RVs : Best suited for smaller RV setups that require limited power. The single 120-volt line restricts simultaneous high-wattage appliance use, making power management crucial to avoid tripping the circuit breaker.
• 50-Amp RVs : Designed for larger RVs with extensive power needs. The dual 120-volt lines facilitate a broader range of appliance usage at once, enhancing comfort and convenience without the risk of overloading the system.

Connecting a 30-amp RV to a 50-amp port is technically feasible but requires a specific adapter. This adapter, often called a " dogbone ," connects the 30-amp plug of the RV to the 50-amp outlet, safely matching the RV's system to the campground's higher-capacity power source. However, while this setup allows for a connection, it does not increase the RV's capacity beyond its 30-amp limits; hence, overloading the RV's electrical system is still a risk if too many appliances are used simultaneously.

Determining whether your RV is equipped for a 30-amp or 50-amp service involves checking a few specific components of your RV's electrical system. Here's what you need to look for:

• Power Inlet : The most visible indicator is the type of plug your RV uses. A 30-amp plug typically has three prongs – one 120-volt hot wire, one neutral, and one ground, shaped in a cylindrical form. A 50-amp plug will have four prongs – two 120-volt hot wires (providing 240 volts), one neutral, and one ground, often more complex in shape and larger than the 30-amp plug.
• Main Circuit Breaker : Open your RV's circuit breaker panel and check the main breaker. A 30-amp service will usually have a single 30-amp main breaker, while a 50-amp service will feature a double-pole main breaker that can handle up to 50 amps per pole.
• Owner's Manual : The RV's owner's manual should specify the service for which it is rated. This is a reliable source of information if you are unsure about the physical characteristics of the outlets or breakers.
• Service Panel : Examine the RV's service panel; it should indicate whether it is designed to handle 30 or 50 amps. Panels equipped to manage 50 amps often support more branch circuits.
• Wiring Size : Although this is more technical and might require professional assistance, 50-amp services typically use thicker wiring than 30-amp services to safely handle the higher current.

Identifying whether your RV is designed for a 30-amp or 50-amp service is crucial for safe and efficient power use . Connecting your RV to the correct type of power supply prevents potential electrical hazards and ensures that all your RV's systems function optimally. If you're still in doubt after these checks, consider consulting with a professional electrician or an RV technician.

Hooking a 50-amp RV to a 30-amp port also requires an adapter. However, this situation is more restrictive because the power available is limited to 30 amps. Owners of 50-amp RVs need to be cautious about their power usage to avoid tripping the circuit breaker . Running multiple high-energy appliances at the same time is not advisable under this setup.

Connecting an RV to a 15-amp home electric outlet is possible but comes with significant limitations. Using an adapter, you can connect your RV's electrical system to a standard household outlet. However, the available power is minimal, generally sufficient only for low-demand tasks like charging batteries or running a few lights. Appliances such as air conditioners or microwaves may exceed the capacity of a 15-amp outlet, potentially leading to circuit breaker trips.

The need for an adapter when connecting an RV to a generator depends on the matching outlet types and the electrical capacities involved. If the generator's outlet and the RV's plug match in type (30-amp to 30-amp, 50-amp to 50-amp), then no adapter is necessary. However, if the configurations differ, an appropriate adapter is required to make a safe and effective connection.

Using a surge protector for your RV service is highly recommended to safeguard your vehicle's electrical system against unexpected voltage spikes and power fluctuations. Here's why a surge protector is essential and what you should consider:

• Protection Against Electrical Surges : RVs are particularly vulnerable to electrical surges from lightning strikes, faulty wiring, or issues with campground power supplies. A surge can damage anything plugged into the electrical system, from appliances to sensitive electronic devices .
• Voltage Regulation : Quality surge protectors not only shield against surges but also help manage low voltage and electrical spikes that occur. This is especially important when your RV is connected to less reliable power sources that may experience frequent voltage fluctuations.
• Preserving Appliance Lifespan : Consistent exposure to unstable power can degrade the life of an RV's electrical appliances over time. Using a surge protector helps ensure that the voltage supplied to your appliances remains within a safe range, thereby extending their lifespan.
• Preventive Safety Measure : Surge protectors often come with indicators that provide warnings about faulty power supplies, such as open grounds, reverse polarity, or excessive voltage, allowing you to address the issue before connecting your RV.
• Choosing the Right Surge Protector : Select a surge protector that matches the amperage of your RV's service. If your RV is equipped with a 30-amp service, use a 30-amp surge protector, and for a 50-amp service, choose a 50-amp protector. Ensure it can handle the maximum voltage your RV may encounter, and look for models that offer features like weather resistance and easy-to-read displays.

Incorporating a surge protector into your RV's electrical setup is a small investment that can prevent costly repairs and replacement of appliances while enhancing safety during your travels.

Choosing the appropriate electrical service for your RV-whether 30-amp or 50-amp-depends fundamentally on your power requirements and how you intend to use your RV. Understanding the differences between these services is essential for efficiently managing your RV's energy needs, especially when connecting to campground utilities or adapting to alternative power sources. Always ensure safety and functionality by using the correct adapters and consulting with professionals to maintain the integrity of your RV's electrical system and prevent potential hazards.

• ATTENTION! VTOMAN HUGE Opening SALE coming!!!
• Best Battery Backups for Home – VTOMAN
• What Size Solar Battery Charger for the Boat – VTOMAN
• VTOMAN Product User Guide
• Portable Power Station:The Basics You Need to Know – VTOMAN

RELATED ARTICLES

Can a Portable Power Station Run a Sump Pump?

What Size Generator is Needed for a Food Truck

What Size Solar Battery Charger for the Boat

How to Make Coffee While Camping Without Fire

What Is the Best RV Generator in 2024

Are Generators Worth It for Camping?

How Many Amps Are Needed for a Refrigerator?

How Much Is a Generator?

• Choosing a selection results in a full page refresh.

We Give Back: 1% of Every Purchase This Month Supports NAMI (National Alliance on Mental Illness) – Join Us in Making a Difference!

Free Shipping On Purchases Over $25

50 Amp NEMA 14-50P to Dual 30 Amp TT-30R Splitter Power Adapter, 3 Foot

• Pure Copper Conductors
• STW Service Cord

High Visibility in the Dark

• Heavy-Duty PVC Jacket

Description

• The GearIT Y splitter adapter allows you to connect your RV and generator at the same time, with its 2 ft cable, heavy-duty capabilities (125/250V | 3750Watts), and two receptacles.
• NEMA Connectors. GearIT Y splitter cable cord works with one male 14-50P plug to two female TT-30R receptacles to ensure a secure and reliable connection. ETL Listed for safe performance.
• Ideal for Outdoor Use. Pure copper, 10 AWG, 3-conductors with individual insulation and heavy-duty PVC jacket.
• Easy to See in the Dark. This bright green outdoor extension cord contrasts with dark surfaces and helps prevent accidents, for example, campgrounds, and other dimly lit spaces.
• Simplify Your Life. GearIT 4 prong to 3 prong Y splitter lets you connect your RV and generator with an adapter cord. GearIt provides you heavy-duty and easy-to-use products to ensure you’re always connected.

50 Amp Y Outlet Splitter Cord from GearIT allows voltages up to 125V and supports up to 3750Watts. This is a STW Rated 3 prong adapter with NEMA 14-50P/TT-30R connectors. Female connectors from outdoor extension cord multiple outlet have ergonomic handles for easy plug and unplug. This 3ft cable cord is perfect to connect dryers, vehicles and trailers.

50 Amp to Dual 30 Amp

Powerful & Heavy-Duty

The GearIT Y splitter adapter facilitates simultaneous connection of your RV and generator. With a 3 ft cable, heavy-duty capacity (125/250V | 3750Watts), and two receptacles, it's the perfect solution.

NEMA Listed Connectors

Power Your RV Easily & Safely

Our Y-splitter cable features one male 14-50P plug and two female TT-30R receptacles, guaranteeing secure, reliable connections. ETL Listed for safety.

Ergonomic Design

Easy To Connect & Disconnect

Featuring large, ergonomic handles on each connection, this adapter ensures easy plugging and unplugging.

The GearIT Green color contrasts with dark surfaces, reducing accidents in garages, gardens, and dimly lit areas.

Durable & Weather Resistant

The heavy PVC jacket ensures this power adapter's resilience in tough weather conditions, including sun, rain, snow, and temperature changes.

• Choosing a selection results in a full page refresh.

• RV Parts & Accessories
• Power & Electrical
• Plugs, Inlets & Receptacles

Enjoy fast, free delivery, exclusive deals, and award-winning movies & TV shows with Prime Try Prime and start saving today with fast, free delivery

Amazon Prime includes:

Fast, FREE Delivery is available to Prime members. To join, select "Try Amazon Prime and start saving today with Fast, FREE Delivery" below the Add to Cart button.

• Cardmembers earn 5% Back at Amazon.com with a Prime Credit Card.
• Unlimited Free Two-Day Delivery
• Streaming of thousands of movies and TV shows with limited ads on Prime Video.
• A Kindle book to borrow for free each month - with no due dates
• Listen to over 2 million songs and hundreds of playlists
• Unlimited photo storage with anywhere access

Important:  Your credit card will NOT be charged when you start your free trial or if you cancel during the trial period. If you're happy with Amazon Prime, do nothing. At the end of the free trial, your membership will automatically upgrade to a monthly membership.

Return this item for free

Free returns are available for the shipping address you chose. You can return the item for any reason in new and unused condition: no shipping charges

• Go to your orders and start the return
• Select the return method

Image Unavailable

• To view this video download Flash Player

30 Amp to 50 Amp RV Adapter Cord, NEMA TT-30P Male to NEMA 14-50R Female, Dogbone RV Trailer Camper Converter, Grip Handle, STW, ETL, 10AWG, Heavy Duty Electrical Power Cable, 12in, 1ft, Green

15M/30F Locking

Purchase options and add-ons

About this item.

• 30 Amp to 50 Amp RV Adapter : Heavy-Duty 10 Gauge Cable, NEMA TT-30P male to NEMA 14-50R female, STW jacket, 125V, 3750W, ETL listed.
• High Quality Materials : Coated with heavy-duty heat-resistant and wear-resistant PVC jacket, Featuring 10 /3 gauge pure copper wire for safer outdoor use.
• Converting Electrical Connections : used for RV, Trailer or Camper parking charging, plugged into a 30A home or outdoor power outlet, and adapting the electrical connection to fit your 50 amp RV.
• Perfect Design : The adapter cable adopts an ergonomic handle design, making it easy to plug and unplug connectors and effectively saving physical strength. In addition, the unique green color is used to make it closer to the color of the grass, making people feel relaxed.
• Reliable Service : We offer a one-year warranty for this cable. If you have any questions about our products, you can contact us at any time, and our professional customer service will reply within 24 hours.

Buy it with

Similar items that may deliver to you quickly

Product Description

High Quality Materials Heat-resistant and wear-resistant green PVC jacket. Featuring 10 /3 gauge pure copper wire for safer outdoor use.

Perfect Design Ergonomic handle design, easy to plug and unplug. The unique green color, making people feel relaxed.

Product information

Technical details, additional information, warranty & support, compare with similar items, looking for specific info, customer reviews.

Customer Reviews, including Product Star Ratings help customers to learn more about the product and decide whether it is the right product for them.

To calculate the overall star rating and percentage breakdown by star, we don’t use a simple average. Instead, our system considers things like how recent a review is and if the reviewer bought the item on Amazon. It also analyzed reviews to verify trustworthiness.

No customer reviews

• Amazon Newsletter
• About Amazon
• Accessibility
• Sustainability
• Press Center
• Investor Relations
• Amazon Devices
• Amazon Science
• Sell on Amazon
• Sell apps on Amazon
• Supply to Amazon
• Protect & Build Your Brand
• Become an Affiliate
• Become a Delivery Driver
• Start a Package Delivery Business
• Advertise Your Products
• Self-Publish with Us
• Become an Amazon Hub Partner
• › See More Ways to Make Money
• Amazon Visa
• Amazon Store Card
• Amazon Secured Card
• Amazon Business Card
• Shop with Points
• Credit Card Marketplace
• Reload Your Balance
• Amazon Currency Converter
• Your Account
• Your Orders
• Shipping Rates & Policies
• Amazon Prime
• Returns & Replacements
• Manage Your Content and Devices
• Recalls and Product Safety Alerts
• Conditions of Use
• Privacy Notice
• Consumer Health Data Privacy Disclosure
• Your Ads Privacy Choices