long travel rhino 660

Yamaha Rhino 660 (Everything You Need To Know)

Affiliate Disclosure: As an Amazon Associate, I earn from qualifying purchases at no additional cost to you. Thank you for supporting my site.

The 2000’s saw some of the best all around ATVs ever made dominating the market for off-road vehicles.  

ATV models such as the Yamaha Grizzly 660 and 700, Honda 300EX and 400EX , and Polaris Sportsman 500 were hard to beat when it came to off-road capabilities.

While there were plenty of side-by-sides around at the time, none of them could come close to offering the same ability when it came to navigating rough terrain and trail riding.

Yamaha changed all of this with the introduction of the Yamaha Rhino 660 in 2003, which now sits firmly atop the list of best used side-by-sides you can buy for under $5,000 .

This guide will offer an in-depth review of the Yamaha Rhino 660 including how it performs, its key specs and features, top speed, pros and cons, and common mechanical issues.

About The Yamaha Rhino 660

During its ten-year production run from 2003 to 2012, the Yamaha Rhino 660 came to be known as one the most dependable, durable, all around quality vehicles of its time.

With a simple yet rugged design, the Rhino 660 looks like exactly what it is – a true utility vehicle in every sense.  Not flashy, but up to any task.

Yamaha essentially took the same technology that made the Grizzly 660 such an impressive ATV and installed it into the body of the Rhino.

The engine, transmission, suspension system, front and rear differentials, and many other components of the Rhino are the same used in the Grizzly.

And with a smaller build than most other UTVs, the Rhino 660 can go pretty much anywhere a smaller ATV can go, but while carrying a passenger and a much heavier load.

Versatility & Off-Road Capabilities

The Rhino 660 was as versatile as you’d find back in the 2000’s.

They could conquer just about any work task you threw at them.

They had just enough top-end speed to give riders a thrill when riding recreationally.

And there weren’t many places they couldn’t go – tight backwoods trails, the steepest mountain terrain, shallow water crossings – the Rhino 660 was always up to the task.

These models were some of the first UTVs that could compete with the off-road capabilities of ATVs at the time.

And their popularity likely inspired the eventual release of some of the groundbreaking sport utility vehicles that came along shortly thereafter, such as the Can Am Maverick X3 and Polaris RZR models.

Key Specs & Features

Powered by the same 660cc single cylinder engine that powers the Grizzly 660 ATV, the engine has more than enough oomph to go pretty much anywhere with an output of around 30 horsepower.

Sand, rocks, deep mud, and even the steepest of hills can all be conquered with the Rhino’s combination of impressive power and on-command 4WD with differential lock.

One of the drawbacks to this older model is the use of a carburetor.  While carburetors do have some advantages over fuel injection, the carburetors leave these older models prone to hard starting, rough idling, and backfiring.

The engine and its components can be accessed by removing the seats and center console.

Similar to the engine, the Rhino 660 is equipped with the same transmission layout used in the Grizzly ATV.

It’s a fully automatic CVT transmission, with drive shafts supplying power to the wheels.  It offers both High and Low gears, along with Neutral, Reverse, and Park settings.

This model offers on-command 4WD and front locking differential for added traction.

The Rhino 660 features a long-travel suspension with independent double wishbones and coil spring shocks in all four corners.

This suspension system does a good job of soaking up chop in the terrain so that it’s not overly jolting at most speeds, but the stock shocks are prone to overheating after prolonged use on the trail.  

This overheating will lead to less dampening, so it is recommended to consider upgraded piggyback shocks if you’ll be trail riding for extended periods in rough-ish terrain.

This model offers a solid ground clearance of 12 inches, giving it the ability to clear rocks, logs, and ruts in the trail within reason.

Tires & Brakes

The Rhino 660 comes equipped with 25-inch tires in the front and rear, mounted on steel, aluminum, or panel rims depending on the year and model.  

The stock tires vary by trim, being either Maxxis or Goodyear brand.

The dual hydraulic disc brakes in front and single shaft mounted disc brake are operated via the brake pedal and together provide plenty of stopping power to slow the Rhino in any terrain.

Dimensions & Capacities

Though the Rhino 660 lacks power steering, it is light enough at 1,049 lbs that it is overly hard to handle either way.  

With a narrow width of only 54 inches, the Rhino is no wider than a standard ATV.  This makes it an excellent trail riding option, but does leave it prone to rollovers.

And with its overall compact size, the Rhino is one of only a handful of utility vehicles that can be squeezed into the 8-foot bed of a full-size pickup truck.

The rear dumping cargo bed is roomy enough to handle around 400 lbs and makes this vehicle an excellent fit for tasks like hauling brush, bricks, or firewood.  It also offers an excellent 1,212 lbs towing capacity.

Exterior & Interior Features

Out front this model features a bumper and brush guard along with two halogen headlights.

The roll cage that helps enclose the roomy cab area has been the subject of some negativity among owners, as some claim from experience that it’s not sturdy enough to do its job if the vehicle rolls.

Another noted drawback with Rhino 660 was that the lack of side doors left riders legs exposed to the elements outside and led to some serious leg injuries for riders who were unfortunate enough to roll their vehicles.

Around 2007, Yamaha made this right by committing to install side doors on all new Rhino models and offering to install them free of charge on all previously manufactured Rhino 660’s.

Inside the cab are two seats separated by an armrest and center console area.  The gear shift is installed at the forefront of this center console area.

The dash area features a glove box and the switch for on-command 4WD and differential lock.  

Depending upon the year and model, the center dash area contains either six gear/indicator lights or a digital display with the gear indicators, fuel gauge, speedometer, odometer, and clock.

In back there’s a good-sized cargo bed that tilts up and dumps, two halogen tail lights, and a standard trailer hitch receiver.  

Yamaha Rhino 660 Top Speed

The Yamaha Rhino 660 is geared low with good low-end torque to help it excel at handling work tasks and trail riding, so top speed is not its strength.

For a totally stock model still in good shape, the Yamaha Rhino 660 top speed is between 40 and 42 mph .

For owners who don’t mind spending a little coin, the top speed can be increased to around 55-60 mph by making some modifications, including:

• Upgrading the clutch system, including the spring, weights and clutch sheave
• Upgrading to a Dynatek CDI
• Upgrading the exhaust
• Replacing the stock tires with bigger tires

Pros & Cons

While the overwhelming majority of past and present Rhino 660 owners have positive things to say about these vehicles, happy and unhappy owners alike will also be quick to note some negatives as well.

Here are the Rhino 660’s main pros and cons:

• Most mechanical components are borrowed from the already proven Yamaha Grizzly 660, including the engine, transmission, and suspension.
• Offers on-command 4WD with locking differential.
• Slim build makes it capable of snaking through tight trails.
• Compact overall size enables it to be loaded (barely) into the bed of a full-size pickup.
• Rear cargo bed and excellent hauling/towing capacities provide workhorse capabilities.
• Excellent climbers, able to crawl up the steepest hills and terrains.
• Loud engine/exhaust noise unless upgrading the stock muffler.
• Carburetor is known to cause issues with backfiring, rough idling, and stalling.
• Stock fuel pumps are prone to going bad.
• Known for being cold-blooded and taking some time to start.
• Vehicle is prone to rolling due to its narrow width and heavy build.
• Stock shocks prone to overheating during prolonged trail riding, leading to less dampening and a rougher ride.

Yamaha Rhino 660 Problems

Owners have also identified some common Yamaha Rhino 660 problems that tend to affect this model as a whole.

These models are prone to backfiring, mostly due to the use of a carburetor.

The stock Mikuni carburetor, and really carburetors as a whole, are quite prone to becoming clogged with dirt and grime over time.

The pilot jets located within the carburetor are particularly susceptible to this, and will lead to backfiring when clogged.

To alleviate backfiring, you’ll need to give the carburetor and the pilot jets a good cleaning to unclog them of any debris.

Fuel Pump Issues

The stock fuel pump in the Rhino 660 is known to cause issues, including an eventual loss of speed and acceleration or rough idling.

Owners should inspect their fuel filters often to ensure they are not clogged, which can lead to fuel pump failure.

Replacing the stock fuel pump with an electric fuel pump has netted good results for owners.

Air Filter Clogging

The Rhino 660’s engine breathes in some serious air in order to operate.

In doing so, it also tends to suck up a good bit of dust and dirt along with this air which leads to the air filter clogging rather often.

Owners should consider upgrading to a UNI air filter, which tends to work the best in the Rhino 660, to help alleviate this. 

It’s a best practice for owners to clean their air filters every 100 miles or so and replace them as needed.

While the last Yamaha Rhino 660 was produced in 2012, well-cared-for used models are just as reliable as ever.

If you’re looking for a versatile utility vehicle, the Rhino 660 is right up there with some of the better models ever made.

For more on Yamaha UTVs and ATVs, check out the following guides before hitting the trail:

• Yamaha Raptor 700 Top Speed
• Yamaha RMAX 1000 Problems
• Yamaha YFZ 450 Top Speed

Your guide for All things off-road.

Follow us on social!

© Offroad official 2024

• Search forums

Follow along with the video below to see how to install our site as a web app on your home screen.

Note: This feature may not be available in some browsers.

• Rock Crawling Forums
• Tech & Fab

2004 Yamaha Rhino 660 Long Travel Build

• Thread starter Thread starter Dan_Goodwin
• Start date Start date Mar 23, 2020

Dan_Goodwin

Birmingham, al.

• Mar 23, 2020

Well-Known Member

One ton swap?  

• Mar 24, 2020
• F: NTN 6006LLU
• R: NTN 6206LLU
• F: SKF 6006-2rsj
• R: SKF 6206-2rsj
• F: Timken 6006rs
• R: Timken 6206rs

Attachments

onepieceatatime

I like turtles....

I dig it  

I've always been curious about the details of your Rhino. Thanks for posting up man, good luck with it and looking forward to more updates!  

Cool little machine, I was really hoping that this was going to have some good info on putting some better axles under this rig.  

Lil ugly said: Cool little machine, I was really hoping that this was going to have some good info on putting some better axles under this rig. Click to expand...

Glad you posted. I bought a Rhino a few years ago. They are good machines. Mine has a lonestar 6in kit with Gorilla axles. I dont beat on it too hard. Mostly a trail cruiser and backup rig. Look forward to your build and some videos if you have them.  

Active Member

• Mar 25, 2020

I too love the rhinos and still wheel them currently. My first was a 04 model and after breaking several axles I learned that the 04 had smaller cv joints than the later models. After learning this I bought axles for 07 model and had way better luck with the axles. Also summer brothers sells just the shafts for +6 long arm for I think $175 each  

• Mar 26, 2020

jason burt said: I too love the rhinos and still wheel them currently. My first was a 04 model and after breaking several axles I learned that the 04 had smaller cv joints than the later models. After learning this I bought axles for 07 model and had way better luck with the axles. Also summer brothers sells just the shafts for +6 long arm for I think $175 each Click to expand...

• Mar 27, 2020

Dan_Goodwin said: From what I've found, no axle using a stock/stock sized CV joint will work, 4130 or 300m doesn't matter. That leaves the only option to go custom, like Gorilla, Turner, RCV, Etc. Gorilla runs $450 per axle, last I checked. I have some SATV Rhino brand stock length axles I have considered getting custom axles made for, but haven't pursued that yet. Another option I'm looking into is the use of Type 1 VW axles. Back when R1 motor swaps were popular a lot of people used a Gear One kit that adapted allowed you to bolt up Type 1 axles. I happened to have one on my shelf. View attachment 117409 Since Facebook has all but killed forums (insert bitter comment here), finding some of this info has been tough. Click to expand...

• Jul 31, 2020

Not Rigless

Rhino is coming along nicely and good work on the home renovation.  

Dan_Goodwin said: My wife and I bought our house summer of 2017 and have been slowly putting our touch on it. It was built in 1960 and has been well taken care of, but hasn't been updated. Our hall bathroom was a beaut: View attachment 119564 View attachment 119565 Click to expand...

• Aug 3, 2020

MoparMan said: Holy ****! That looks just like the hall bathroom in my in-laws house!:****: Click to expand...

Does it have turf mode? Asking for a friend???  

Sonzabitches!

• Aug 4, 2020

Dan_Goodwin said: I was genuinely disappointed we didn't have the pink tub and toilet to match to really finish the look off. Click to expand...

poolman said: Does it have turf mode? Asking for a friend??? Click to expand...

Beerj said: I don't know anything about sxs's, but I actually have a pink tub and shitter in our main bathroom. Would love to redo the whole thing but the tub is the biggest thing holding me up. Click to expand...

Dan_Goodwin said: Purely arm chair quarterbacking here. The hardest part about my tub install was getting the drain installed to the tub itself - the install and removal wasn't bad at all. Click to expand...

Beerj said: I'd be okay with replacing it if it wasn't for the fact that I believe the walls were put up around the tub/shower unit. No way to fit it through the door and make the turn down the hallway. I think my best option would be to cut the old one to pieces and just put in a new tub, then tile up the walls to make the shower portion. Sorry for the derail but in my defense, you started it. Lol Edit* Just got to looking and they actually make ones where the tub and wall portions are separate pieces. That would probably work. Click to expand...

Latest posts

• Latest: midnight_f150
• Today at 1:49 PM

• Latest: bobbedrunner99
• Yesterday at 6:55 PM

• Latest: money_pit_yj
• Tuesday at 6:12 PM

• Latest: ridered3
• Tuesday at 1:29 PM
• Monday at 10:43 PM

Random media

Please keep lead times in mind! We are working hard to fulfill all orders in a timely manor! Thank you for your continued support & patience!

Item added to your cart

fireballracing.com

Yamaha Rhino 660/700 Long Travel Suspension

Fireball Racing Long Travel Suspension for Yamaha Rhino 660/700 models. This chromoly long travel kit adds 6" in width & utilizes high quality, high performance Elka shocks to give your rhino the best ride quality & handling.

Note: This kit comes powder coated 50% black . If you wish to get a different color please contact us at (559)324-9533

Couldn't load pickup availability

SUBSCRIBE TO OUR EMAILS

Be the first to know about new collections and exclusive offers.

• Choosing a selection results in a full page refresh.
• Opens in a new window.

Yamaha Rhino 660: The Ultimate Off-Road Utility Vehicle

The 2006 Yamaha Rhino 660, a technological marvel in the world of off-road vehicles, is a remarkable fusion of engineering prowess and cutting-edge innovation. This utility terrain vehicle (UTV) is more than just a machine; it’s a symbol of Yamaha’s engineering prowess and dedication to delivering exceptional performance. 

In this article, we embark on an extensive journey into the intricate technical details that define the Rhino 660, elevating it to a position of eminence in the world of off-road exploration.

Table of Contents

About yamaha rhino 660.

The Yamaha Rhino 660 was introduced in the mid-2000s and gained significant attention because of its off-road driving abilities Also it stayed strong even in tough situations. Its strong engine and powerful suspensions facilitate swift navigation through challenging terrains and provide a smooth riding experience. The vehicle was designed to accommodate two passengers side by side, making it a suitable choice for various applications, from ranch work to outdoor adventures. 

Yamaha Rhino 660 also faced some challenges in terms of safety because it could tip over, but Yamaha fixed that. In later years, Yamaha introduced newer models in the Rhino series, addressing some of the safety concerns and design changes for enhanced stability.

Regular and attentive maintenance was highlighted as pivotal in maximizing the vehicle’s longevity and performance.

Yamaha Rhino 660 Top Speed

The 2006 Yamaha Rhino 660 is an off-road utility vehicle renowned for its power and performance. When it comes to top speed, the Rhino 660 exhibits impressive capabilities that contribute to its reputation as a versatile off-road companion.

The top speed of the 2006 Yamaha Rhino 660 can vary based on several factors, including terrain conditions, load, altitude, and the vehicle’s overall condition. On average, the Rhino 660 can achieve a top speed of around 40 to 45 mph (64 to 72 km/h) under optimal conditions. This speed is well-suited for navigating a variety of off-road landscapes, from open trails to rough terrains.

Yamaha Rhino 660 Specfications:

Engine performance.

The 2006 Yamaha Rhino 660 derives its power from a liquid-cooled, 4-stroke single-cylinder SOHC engine. With a displacement of 660 cc (40.3 in³) and a compression ratio of 9.10:1, this engine delivers efficient combustion and reliable performance. A wet-sump lubrication system ensures durability during rugged off-road rides. The bore-stroke ratio of 100 x 84 mm (3.94 x 3.31 inches) mirrors the sporty Raptor, enhancing power delivery.

Paired with a BSR42 Mikuni carburetor and a wet-type air filtration system, the Rhino 660 achieves a power output of 23 to 31 horsepower (17.1 to 23.1 kW). Fuel efficiency is evident with an average of 18.7 mpg (12.6 L/100 km) and a tank range of 90 to 110 miles. This engine embodies a harmonious blend of power and reliability, fueling an off-road adventure like no other.

Transmission and Drivetrain

The Ultramatic V-belt automatic transmission offers a seamless transition between the Rhino 660’s high and low gear ratios. Its dual-range drive system contributes to its exceptional versatility. The On-Command 2WD/4WD system, controlled by a dash-mounted lever, empowers the Rhino 660 with the ability to shift between 2-wheel and 4-wheel drive modes as required, while the differential lock ensures optimum traction.

Fuel Efficiency

The 2006 Yamaha Rhino 660’s thirst for adventure is quenched by its 30-litre (7.93 US gallons) fuel tank. Optimal performance calls for unleaded gasoline with a RON 91 Octane rating, especially for EU units. The Rhino also embraces other fuel variants adhering to JASO T903 MA/MB standards, as long as they contain no more than 15% MBTE, 10% ethanol, or 5% methanol. With this choice, the Rhino’s engine comes alive, eager to tackle the unknown with gusto.

Lubrication 

The heart of the Rhino, its engine, thrives on the right lubrication. Filter replacement demands 1.9 liters (2.01 US quarts), while filter cartridge replacement hunger for 2.0 liters (2.11 US quarts). During disassembly or overhaul, a nourishing 2.8 liters (2.96 US quarts) keeps the engine’s rhythm steady. Meanwhile, the final gear case craves 250–280 ml (8.45 — 9.47 oz.) of oil, and the differential gear case yearns for 320–330 ml (10.82 — 11.16 oz.). 

The Rhino’s preferred engine oil is SAE 10W-40 Yamalube 4 Motor Oil, yet the flexibility extends to multigrade oils like SAE 5W-30, 10W-30, 15W-40, 20W-40, or 20W-50 (as mentioned in the owner’s manual). The only mandate is an API service classification of SJ or higher and a resolute refusal of “Energy Conserving II” or CD diesel engine oil labels. With precise fuel and attentive lubrication, the 2006 Yamaha Rhino 660 conquers trails and challenges with unwavering prowess.

Ignition system

The heartbeat of the 2006 Yamaha Rhino 660, its ignition system, is orchestrated by a DC-CDI (Capacitive Discharge Ignition) mechanism. This masterful system ignites the engine’s potential with a precise ignition timing of 12° BTDC (Before Top Dead Center) at an engine speed ranging from 1,450 to 1,550 RPM.

A triple-phase A.C. magneto, a true work of engineering artistry, takes center stage as the charging system. With a nominal output of 14V and 23A at 5,000 RPM, it breathes life into the Rhino’s electrical needs. The symphony continues with a 12V 28 Ah/(10 HR) battery that stands as a powerhouse for illuminating lights and empowering electronic accessories.

The role of sparking brilliance rests on the capable shoulders of an NGK DPR8EA-9 spark plug, with a spark gap of 0.8 to 0.9 mm (0.031 to 0.035 inches)—the catalyst for ignition.

The vibrant illumination ensemble is composed of the following wattages, forming a symphony of light:

Together, these ignition and lighting elements orchestrate a symphony of power and illumination for the 2006 Yamaha Rhino 660.

Suspension and Handling

Boasting an independent double-wishbone suspension on all four wheels, the Rhino 660 is primed for stability and agility. With a front suspension travel of 7.3 inches (185 mm) and a rear suspension travel of 7.3 inches (185 mm), this UTV conquers uneven terrain with remarkable ease. The vehicle’s impressive ground clearance of 12.1 inches (307 mm) adds to its off-road prowess.

Cargo Bed and Towing Capacity

A utilitarian marvel, the Rhino 660 features a tilting cargo bed with dimensions of 42.7 inches (1084 mm) in length, 32.7 inches (831 mm) in width, and 11.6 inches (295 mm) in depth. This bed boasts a carrying capacity of 400 lbs (181 kg) while its towing capacity reaches approximately 1,200 lbs (544 kg). These numbers underscore the Rhino 660’s versatile capacity to handle heavy loads with utmost ease.

Safety and Ergonomics

The Rhino 660’s Roll Over Protective Structure ( ROPS ) frame safeguards passengers in the event of a rollover incident. Coupled with 3-point seatbelts, this feature ensures optimal safety. The digital multi-function display keeps riders informed about vital parameters such as speed, fuel level, and trip distance. Additionally, the Rhino 660’s adjustable bucket seats, center console, and cup holders contribute to a comfortable and ergonomic riding experience.

Dimensions and Weight

The Rhino 660’s overall length of 113.6 inches (2885 mm), width of 54.5 inches (1384 mm), and height of 73.0 inches (1854 mm) emphasize its formidable stance. With a wheelbase of 75.2 inches (1910 mm) and a curb weight of 1,123 lbs (509 kg), this UTV strikes an optimal balance between stability and maneuverability.

More: Yamaha Raptor 125 Top Speed

Reliability and Longevity

The reliability and longevity of the Yamaha Rhino 660 is a crucial factor for potential buyers who are looking for a versatile and dependable off-road utility vehicle. When properly maintained, the Rhino 660 can be a reliable workhorse that can handle various tasks, from hauling heavy loads to traversing rough terrains. Regular maintenance is essential to ensure that the Rhino 660 continues to perform at its best, and potential buyers should be aware of some of the recommended maintenance tips to keep their vehicle in top condition.

In addition to regular maintenance, aftermarket upgrades can also improve the Rhino 660’s reliability and longevity. Some of the popular upgrades include upgrading the stock shocks to heavy-duty options, installing a better air filter, and replacing the stock fuel pump with a high-performance one. These upgrades can improve the Rhino 660’s durability, performance, and overall lifespan. Potential buyers should consider these upgrades when looking for a dependable off-road utility vehicle that can handle various tasks and terrain.

Pros of the 2006 Yamaha Rhino 660:

Powerful engine performance.

The 660cc liquid-cooled, 4-stroke engine delivers a hearty 35.0 horsepower, providing ample power for tackling a wide range of terrains and tasks.

Versatile Transmission

The Ultramatic V-belt automatic transmission with a dual-range drive system ensures smooth transitions between high and low gear ratios, enhancing adaptability to different conditions.

Responsive Drivetrain

The On-Command 2WD/4WD system, coupled with a differential lock, grants impressive traction and stability, allowing the Rhino 660 to navigate challenging terrain with ease.

Advanced Suspension System

Independent double-wishbone suspension on all four wheels, along with adjustable shock absorbers, provides a comfortable and controlled ride over rough terrains .

Robust Cargo and Towing Capacity

With a cargo bed capable of carrying up to 400 lbs and a towing capacity of approximately 1,200 lbs, the Rhino 660 is a versatile workhorse for hauling tools, equipment, and supplies.

Safety Features

The Rollover Protective Structure (ROPS) frame, combined with three-point seatbelts, prioritizes rider safety and protection, offering peace of mind during off-road adventures.

User-Friendly Display

The digital multi-function display keeps riders informed about essential information such as speed, fuel level, and trip distance, enhancing convenience and control.

Comfort-Oriented Design

Adjustable bucket seats, a center console, and cup holders contribute to rider comfort during extended rides, enhancing the overall experience.

Manoeuvrable Dimensions

With a balanced width, height, and wheelbase, the Rhino 660 strikes a harmonious balance between stability and agility, making it versatile for various terrains.

The Rhino 660’s fuel tank capacity of 7.9 gallons, paired with its efficient engine, allows for extended adventures without frequent refueling stops.

Cons of the 2006 Yamaha Rhino 660

Limited seating capacity.

The Rhino 660 typically seats two passengers, which may be a limitation for those seeking a larger capacity for group outings.

Noise and Vibration

Like many off-road vehicles , the Rhino 660 can produce considerable noise and vibration, potentially affecting rider comfort during prolonged rides.

Rough Ride on Uneven Terrain

While the advanced suspension system offers a comfortable ride, extremely rugged terrain might still transmit some bumps and jolts to the occupants.

Maintenance Requirements

Due to the nature of off-road usage, regular maintenance may be required to keep the Rhino 660 in optimal condition, which can translate to time and cost investment.

Lack of Enclosed Cabin

Unlike some other utility vehicles, the Rhino 660 lacks an enclosed cabin, which means riders are exposed to the elements during rides in adverse weather conditions.

More: Yamaha Raptor 1000 Top Speed

Pros and Cons of the 2006 Yamaha Rhino 660: A Quick Look

Yamaha rhino 660 price.

The 2006 Yamaha Rhino 660 made a significant impact with its powerful performance and versatility in the off-road market. Back in 2006, this utility terrain vehicle (UTV) had a starting price of around $9,199. This cost reflected its advanced features, including a robust 660cc engine, responsive drivetrain, and innovative safety measures like the Roll Over Protective Structure (ROPS) frame. 

Its ability to handle cargo, tow loads, and provide a comfortable ride contributed to its value. While prices might vary based on factors like location and optional features, the Rhino 660’s durable reputation justified its cost and held its resale value relatively well.

2006 Yamaha Rhino 660: Trim Levels and Values 

Common problems.

One of the challenges faced by Rhino 660 owners is the vehicle’s susceptibility to rolling due to its narrow width and heavy build. This issue can evoke feelings of uncertainty and danger while navigating difficult terrain. While the Rhino 660 has a solid ground clearance of 12 inches, its narrow width can make it prone to tipping over. To mitigate this issue, it is crucial to exercise caution while driving, especially on uneven terrain.

Another common problem that Rhino 660 owners encounter is carburetor issues. Backfiring, rough idling, and stalling are common signs of carburetor problems. The carburetor is responsible for mixing fuel and air before it enters the engine. A clogged carburetor or pilot jet can cause fuel to enter the engine unevenly, leading to the aforementioned symptoms. To avoid carburetor issues, it is essential to perform regular maintenance, such as cleaning the air filter and carburetor and using high-quality fuel. Additionally, it is recommended to replace the stock carburetor with an aftermarket one, which is more reliable and efficient.

The Rhino 660’s roll cage safety and carburetor issues are two common problems that owners should address to ensure a safe and enjoyable off-road experience.

FAQs Section

What is the 2006 yamaha rhino 660 .

The 2006 Yamaha Rhino 660 is a utility terrain vehicle (UTV) designed for off-road exploration, work tasks, and recreational activities. It’s known for its powerful engine, versatile transmission, and advanced suspension system.

What kind of engine does the Rhino 660 have? 

The Rhino 660 is powered by a 660cc liquid-cooled, 4-stroke single-cylinder engine. It produces 35.0 horsepower at 5,500 RPM and 39.8 lb-ft of torque at 4,500 RPM.

What is the top speed of the 2006 Yamaha Rhino 660? 

The 2006 Rhino 660 can achieve a top speed of around 40 to 45 mph (64 to 72 km/h) under optimal conditions. Actual top speeds can vary based on factors such as terrain and load.

What are the safety features of the Rhino 660? 

The Rhino 660 features a rollover protective Structure (ROPS) frame for occupant protection in rollover incidents. It also comes with three-point seatbelts to enhance safety during rides.

Can the Rhino 660 handle cargo and towing? 

Yes, the Rhino 660 is designed for utility as well. It has a cargo bed with a capacity of 400 lbs (181 kg) and can tow approximately 1,200 lbs (544 kg), making it suitable for hauling tools, equipment, and supplies.

What is the fuel economy of the Yamaha Rhino 660?

The fuel efficiency of the Yamaha Rhino 660 is approximately 10-12 miles per gallon. Regular maintenance is recommended, including cleaning the air filter every 100 miles and addressing common issues such as backfiring and fuel pump problems.

Can the Yamaha Rhino 660 be used for plowing snow?

Snow plowing with a Yamaha Rhino 660 requires the right attachments. Consider using a snow plow blade, winch, and tire chains. Clear snow in a straight line to prevent the vehicle from tipping, and avoid plowing steep inclines.

Does the Yamaha Rhino 660 have a winch installed?

The Yamaha Rhino 660 does not come with a winch installed, but it is winch compatible. Aftermarket options are available. This information is presented in an objective, technical, and knowledgeable style for an audience with a subconscious desire for serving others.

What is the maximum weight capacity for the passenger seat in the Yamaha Rhino 660?

The passenger seat weight capacity of the Yamaha Rhino 660 is 300 lbs. The vehicle provides safety features such as seat belts, roll cage, and side doors. Comfort and customization options include adjustable driver and passenger seats and a variety of roof and windshield options.

Is the Yamaha Rhino 660 street legal?

The Yamaha Rhino 660 is not street legal and should only be used off-road. Pros and cons include its excellent off-road capabilities, hauling/towing capacities, and compact size, but its lack of safety features and compliance with safety regulations make it unfit for public roads.

Final Verdicts

Yamaha Rhino 660, it’s evident that this UTV is more than just a machine—it’s a masterpiece of engineering. Every numerical detail, from its impressive horsepower and torque figures to its suspension travel, cargo capacity, and safety features, paints a vivid picture of a vehicle that transcends the boundaries of performance and utility. 

The Rhino 660 is a symphony of innovation, a vehicle that empowers riders to master the outdoors with finesse and confidence. In every aspect, the 2006 Yamaha Rhino 660 stands as a true testament to Yamaha’s unwavering commitment to excellence.

Share this post:

Leave a comment cancel reply.

• Forum Listing
• Marketplace
• Advanced Search
• Member's Marketplace
• Yamaha Rhino's & Rhino Parts For Sale

2007 660 Long Travel

• Add to quote

Bump... $9000 obo  

Alright, $7700...  

• ?            
• 118.2K posts
• 8.6K members

Top Contributors this Month

• Search forums

Follow along with the video below to see how to install our site as a web app on your home screen.

Note: This feature may not be available in some browsers.

• UTVUnderground 'Shop Talk'
• UTV Chassis & Suspension

Yamaha   Rhino 660 Long Travel +6 kit

• Thread starter JRLoos
• Start date Mar 7, 2013

• Mar 7, 2013

I've got arms and complete axles with CVs for a 660. All you need is shocks to complete this kit. $1100 plus shipping.  

CustomizedRhino13

Hot rod kool aid.

Did it not work out?  

• Mar 8, 2013

I can't find axles at a reasonable price.  

Put some together .. order axles sticks from a company that sells +6 l/t and use your stock cvs sent from a payphone  

Super atv has cheap axles Sent from my maverick using Tapatalk 2  

I don't think superatv makes +6axles for the rhino anymore.. last time I.spoke with them they said they quit making the kit so they quit making the axles... I would check with a few companies and see you can buy the axle sticks trainable and use stock CVS.. lot better than a heavy cv setup sent from a payphone  

• Mar 9, 2013

Well I ordered a complete Twisted LT kit minus shocks. So I need these other arms and axles gone!  

$1100 plus shipping...  

• Mar 13, 2013

Bump. My other kit will be here tomorrow...  

• Mar 14, 2013

View attachment 9450 View attachment 9451 View attachment 9452 $1000 plus shipping.  

Attachments

05rhinorider

• Apr 23, 2013

Do you still have it? Im interested.  

Sale pending.  

• Oct 10, 2016

I know is been a long time but u still got those rhino long travel arms?  

Similar threads

• utvwolfpack
• Apr 25, 2023
• UTV Wolfpack Store
• Buy and Sell

• Matt Martelli - CEO
• May 22, 2024
• General UTV Discussion
• Jan 16, 2024
• Sep 8, 2023
• Trips,Group Rides, & Events

Members online

Forum statistics, share this page.

• HONDA TRX450
• HONDA TRX250R & ATC250R
• HONDA 400EX
• HONDA 250X/300EX
• YFZ450R & YFZ450X (FUEL INJECTED)
• YFZ450 (CARB MODEL)
• WARRIOR 350
• RAPTOR 125 & 250
• SUZUKI LT250 & LT500
• SUZUKI Z400
• SUZUKI LTR450
• KAWASAKI KFX400
• KAWASAKI KFX450R
• POLARIS PREDATOR
• POLARIS OUTLAW 450MXR/525S
• CAN AM DS450
• CAN AM DS650
• KTM 450SX/505SX
• A-ARM REBUILD HARDWARE
• STEERING STEM REBUILD HARDWARE
• SWINGARM REBUILD HARDWARE
• BEARING HOUSING REBUILD HARDWARE
• AXCALIBAR PRO AXLE REBUILD HARDWARE
• NERF BAR REBUILD HARDWARE
• MAVERICK X DS TURBO
• Polaris PRO R / Turbo R
• POLARIS PRO XP
• POLARIS XPTURBO S
• POLARIS RZR XP TURBO
• POLARIS RZR XP1000
• POLARIS RZR XP900
• POLARIS RZR 800
• POLARIS RZR 570
• Polaris RZR 200
• POLARIS RZR 170
• POLARIS RS1
• YAMAHA YXZ1000R
• YAMAHA RHINO
• KAWASAKI TERYX
• LSR70 / ATC70
• Race Builds
• BUILD GALLERY
• INSTALL GUIDES
• WARRANTY INFORMATION
• DEALER APPLICATION
• CONTACT INFORMATION
• INTERNATIONAL DEALERS

Yamaha Rhino +6.5" XTR Suspension Kit

The Lone Star Racing XTR Suspension Kit for the Yamaha Rhino is 6.5" wider per side and extends the wheel base 2" forward and 2" rearward. The arms are made from 4130 chromoly for superior strength and feature quick caster adjustments on the front arms. The kit will use long travel shocks and will achieve 15.5" of wheel travel in the rear with 14.25" in the front.

• Comes with delron bushings and inner pivot tubes
• Uses stock ball joints on lower arms(not included)
• Uses OEM rear sway bar
• Might require some fender trimming
• OEM wheels will not work in rear

Instructions: XTR A-Arms 01.ai (shopify.com)

Quick Caster Setup: Rhino Quick Caster.ai (shopify.com)

You may also like

• Visit Our Blog about Russia to know more about Russian sights, history
• Check out our Russian cities and regions guides
• Follow us on Twitter and Facebook to better understand Russia
• Info about getting Russian visa , the main airports , how to rent an apartment
• Our Expert answers your questions about Russia, some tips about sending flowers

Russian regions

• Arkhangelsk oblast
• Kaliningrad oblast
• Karelia republic
• Komi republic
• Leningrad oblast
• Murmansk oblast
• Nenets okrug
• Novgorod oblast
• Pskov oblast
• Vologda oblast
• Map of Russia
• All cities and regions
• Blog about Russia
• News from Russia
• How to get a visa
• Flights to Russia
• Russian hotels
• Renting apartments
• Russian currency
• FIFA World Cup 2018
• Submit an article
• Flowers to Russia
• Ask our Expert

The Komi Republic, Russia

The capital city of Komi republic: Syktyvkar .

The Komi Republic - Overview

The Republic of Komi is a federal subject of Russia located in the north-east of the European part of the country, part of the North-West Federal District. Syktyvkar is the capital city of the republic.

The population of the Komi Republic is about 803,500 (2022), the area - 416,774 sq. km.

Komi republic flag

Komi republic coat of arms.

Komi republic anthem

Komi republic map, russia, komi republic latest news and posts from our blog:.

27 December, 2022 / Syktyvkar - the view from above .

17 June, 2021 / Frozen Abandoned Apartment Buildings in Vorkuta .

12 October, 2017 / Northern Urals: Manpupuner Plateau and Dyatlov Pass .

24 March, 2016 / Manpupuner rock formations - a natural wonder of Russia .

5 July, 2015 / Summer snow in Vorkuta .

More posts..

History of the Komi Republic

In the middle of the 3rd millennium BC, the Finno-Ugric tribes came to the territory of the European part of present Russia. In this land they lived about 3,000 years. During this long period of time, a lot of new ethnic groups appeared such as the Finns, Karelians, Veps, Estonians, Chud (Komi), and others.

Bjarmaland, known from the sagas and chronicles, was a historical region in the north of Eastern Europe that traded with the Vikings who discovered it at the end of the 9th century AD. But after a while the territory of Bjarmaland was greatly reduced due to the migration of the Slavs. The local population came under the influence of Russian principalities, the Novgorod Republic and Sweden.

In the 14th century, the most powerful of the Chud (Komi) tribes united and created the state of Great Perm. During its independence, Perm fought against the Volga Bulgars, the Moscow principality and the Novgorod Republic. At the end of the 15th century, after the Novgorod Republic ceased to exist, the strengthened Moscow principality destroyed the last independent state of the Komi people.

More historical facts…

The region became an important source of furs, one of the most valuable natural resources of the time. Due to the harsh climate and lack of year-round roads, this territory remained sparsely populated for a long time. In the middle of the 18th century, oil production started near the Ukhta River.

The revolutionary events of 1917 contributed to the development of national social movements. August 22, 1921, the Komi Autonomous Region was formed. Active development of Komi and population growth began in the 1930s-1950s in connection with the development of the Gulag (Soviet forced labour camp system).

In the early 1930s, large coal reserves were found in the region. Coal production began during the Second World War to compensate for the loss of coal mining in the Donbas occupied by the Germans. The railroad “Ukhta-Pechora-Inta-Vorkuta” was built by prisoners for transportation of coal, oil and timber. At the end of the 1950s, the Gulag was abolished but a number of camps for prisoners continued to exist in the region.

On January 12, 1993, Komi SSR became the Republic of Komi. On February 17, 1994, the Constitution of the Komi Republic was adopted. On June 6, 1994, the republic received its coat of arms, flag and hymn. The collapse of the USSR led to a crisis in the local industry. A lot of mines were closed resulting in a large outflow of population from the republic. In 1990-2007, the Republic of Komi lost about 22% of its population.

Beautiful nature of the Komi Republic

The Komi Republic landscape

Author: Nikolay Alexandrov

The Komi Republic scenery

Komi - the land of swamps and forests

Author: Starokozhko Denis

The Komi Republic - Features

The climate is temperate continental. Winters are long and cold, summers are short. The average temperature in January: -20 degrees Celsius (in the northern part) and -17 degrees Celsius (in the southern part), in July: +11 degrees C (in the northern part) and +15 … + 17 degrees C (in the southern part).

The Komi Republic is rich in mineral resources: coal (Pechora coal basin), oil and natural gas (Timan-Pechora oil and gas province), bauxite, gold, diamonds, titanium, sulfur. Forests cover about 65% of the territory.

The republic’s economy is based on the extraction and processing of minerals - oil, natural gas, coal, bauxite, gemstones, etc., wood processing and paper-making enterprises. The Komi Republic is one of the leading timber regions of Russia. Reindeer husbandry is an important traditional sector. In 2010, there were 82 thousand deer in the republic.

The national composition according to the 2010 Census: Russians (65.1%), Komi (23.7%), Ukrainians (4.2%), Tatars (1.3%), Belarussians (1%), Germans (0.6%).

Attractions of the Komi Republic

Pechora-Ilych Nature Reserve and National Park “Yugyd Va” united under the title “Virgin forests of Komi” are included in the list of World Cultural and Natural Heritage.

There are dozens of natural attractions in the Komi Republic. The most interesting ones are:

• “The ruins of an ancient town” on Torre-Porre-Iz Plateau;
• “Karst ravine of Iordanskiy” on the right bank of the Malaya Pechora River, 16 km up from where Bolshoi Shezhim flows into it;
• “Verkhniye Vorota” on the Bolshaya Synya River (55 km up the railway bridge);
• “Koltso” on the Sharyu River (30 km from Usinsk);
• Caves: “Kaninskaya” - 47 km up the mouth of the Unya River, on the right bank of the Pechora, “Unyinskaya” - 110 km from the Unya mouth, “Ledyanaya”, “Tufovaya” and “Medvezhya peschera” in “Karst ravine of Iordanskiy”, where one of the most northern sites of Paleolithic man was found. It is also the largest in northern Europe location of Pleistocene fauna - the bones of mammoth, woolly rhinoceros, cave bears.

The candidates for the title Seven Wonders of Russia from the Republic of Komi:

• Bogatyr-Shelye rock - a geological monument located on the Bolshaya Synya River;
• The Schugor River: “Verkhniye Vorota” (73 km from the mouth), “Sredniye Vorota” (9 km lower of “Verkhniye Vorota”), “Nizhniye Vorota” (the most picturesque place located 22 km from the mouth, on the right bank) and the waterfalls “Veldor-Kyrta-El”;
• Lyokiz rocks - a geological monument located on the right bank of the Ilych River in Pechora-Ilych Nature Reserve;
• Weathering Pillars on Manpupuner Plateau - a geological monument located between the rivers Ichotlyaga and Pechora, one of the winners of the contest “Seven Wonders of Russia”;
• The town of Inta. Kozhimsky and Syvyusky geological monuments, “Stone baba”, the rocks “Rif”, “Monakh”, “Kayuk-Nyrd”, “Nortnicha-el”;
• Yb - an ancient settlement located 50 km south of Syktyvkar, on the bank of the Sysola River. Due to hot and dry summers and low water level in the Sysola, a lot of remnants of pre-historical animals (ichthyosaurs and plesiosaurs) were found there.

Komi republic of Russia photos

Pictures of the komi republic.

Nature of the Komi Republic

Author: E.Groshevik

Forest lake in the Komi Republic

Author: Parkhomenko Konstantin

Snowy winter in the Komi Republic

Author: Ivan Pozdeev

Churches in the Komi Republic

Former church used as a boiler house in the Komi Republic

Author: Kiyanovsky Dmitry

Wooden church in the Komi Republic

Author: S. Shumilov

Abandoned wooden church in the Komi Republic

Author: Alexander Zlobin

The questions of our visitors

• Currently 2.85/5

Rating: 2.9 /5 (237 votes cast)

• Forum Listing
• Marketplace
• Advanced Search
• Technical Rhino Forums

+6 Long travel axle length

• Add to quote

I have a +6 long travel set up and need to know the common axle shaft length. I am not sure of the brand I bought it used. The front end keeps popping out and I am wondering if I have the right axles. I may need +6.5 axles. The shaft length I have is 22" just wondering if someone can tell me how long the shafts are for a +6 and +6.5. It acts like I need about another inch. I have not adjusted the camber/caster since I purchased the kit. I am going to run the adjustments in and see if I can get enough to make the axles work but would like to make it correct if possible. Thanks for your help.  

Our +6 front axles are 22-7/16  

THanks Jim. It seemed to work moving them in. I might have to give you a call if this doesn't work for some reason. Worked out today but the camber is off so I need to set it up and if they pop out then I will try yours.  

gorilla axels I was reading this post because i broke a driver side rear gorilla axel on my rhino. Researching on the internet it seems there are several different lengths of axels. I beleive I have a +6 kit on my rhino, bought the rhino used with the kit on it. I'm not sure who made the kit, the guy i bought it from said it may be a so cal fab kit, the axel length is 22 5/8". Is there someplace in Orange County where i might be able to get a new axel and other parts?  

hbmarc said: I was reading this post because i broke a driver side rear gorilla axel on my rhino. Researching on the internet it seems there are several different lengths of axels. I beleive I have a +6 kit on my rhino, bought the rhino used with the kit on it. I'm not sure who made the kit, the guy i bought it from said it may be a so cal fab kit, the axel length is 22 5/8". Is there someplace in Orange County where i might be able to get a new axel and other parts? Click to expand...

• ?            
• 751.6K posts
• 48K members

Top Contributors this Month