cruise control not working in expedition

2000 Ford Expedition Cruise Control Not Working [Quick And Easy Solutions]

Your 2000 Ford Expedition’s cruise control is a convenient feature that can help you save gas and reduce driver fatigue on long road trips. But when it stops working, it can be a major inconvenience.

In this guide, we’ll walk you through the steps to troubleshoot a 2000 Ford Expedition cruise control that’s not working. We’ll cover common causes of the problem, as well as how to diagnose and fix them.

We’ll also provide tips on how to prevent your cruise control from breaking down in the future.

So if your Expedition’s cruise control is acting up, read on for help!

Why 2000 Ford Expedition Cruise Control Not Working

Cruise control throttle position sensor.

The cruise control throttle position sensor (TPS) is a potentiometer that sends a signal to the cruise control computer. The computer uses this signal to determine the current throttle position and adjust the cruise control speed accordingly. If the TPS is faulty, the cruise control will not work.

Cruise Control Brake Switch

The cruise control brake switch is a switch that tells the cruise control computer when the brakes are applied. If the brake switch is faulty, the cruise control will not work.

Cruise Control Bypass Switch

The cruise control bypass switch is a switch that allows the driver to temporarily override the cruise control. If the bypass switch is faulty, the cruise control will not work.

Cruise Control Computer

The cruise control computer is the electronic control unit that manages the cruise control system. If the computer is faulty, the cruise control will not work.

Cruise Control Wiring

The cruise control system is wired to the vehicle’s electrical system. If there is a problem with the wiring, the cruise control will not work.

How to Troubleshoot: 2000 Ford Expedition Cruise Control Not Working

The cruise control on your 2000 Ford Expedition is a convenient feature that can help you maintain a steady speed on long road trips. However, if your cruise control isn’t working, it can be a major inconvenience.

There are a few different things that could cause your cruise control to stop working. In this article, we’ll walk you through the steps to troubleshoot the problem and get your cruise control up and running again.

Troubleshooting Steps

1. Check the cruise control switch: The first thing you should do is check the cruise control switch to make sure it’s turned on. The switch is located on the steering column, usually to the right of the steering wheel.

2. Check the cruise control fuse: If the cruise control switch is turned on, the next step is to check the cruise control fuse. The fuse is located in the fuse box under the hood. 3. Check the cruise control actuator: The cruise control actuator is a small motor that controls the throttle. It’s located under the hood, near the throttle body.

4. Check the cruise control wiring: The cruise control system is controlled by a series of wires. These wires can become damaged over time, which can cause the cruise control to stop working.

5. Take your vehicle to a qualified mechanic: If you’ve checked all of the above and your cruise control is still not working, it’s time to take your vehicle to a qualified mechanic. They will be able to diagnose the problem and make the necessary repairs.

The cruise control on your 2000 Ford Expedition is a valuable feature that can make long road trips more enjoyable. If your cruise control isn’t working, it can be a major inconvenience. However, by following the steps in this article, you can troubleshoot the problem and get your cruise control up and running again.

Additional Resources

[How to Use the Cruise Control on Your Ford Expedition](https://www.yourmechanic.com/article/how-to-use-the-cruise-control-on-your-ford-expedition) [How to Troubleshoot a Cruise Control](https://www.caranddriver.com/how-to/a15136088/how-to-troubleshoot-a-cruise-control/)

Also Read: 2000 Ford Expedition Driver Window Not Working

FAQs: 2000 Ford Expedition Cruise Control Not Working

Why is my 2000 ford expedition cruise control not working.

There are a few possible reasons why your 2000 Ford Expedition cruise control may not be working.

The cruise control switch may be faulty: This is the most common cause of a cruise control not working. The switch can be tested by disconnecting the cruise control wiring harness from the switch and using a multimeter to check for continuity between the terminals. If there is no continuity, the switch will need to be replaced.

The cruise control actuator may be faulty: The actuator is the motor that controls the throttle valve. It can be tested by disconnecting the cruise control wiring harness from the actuator and using a multimeter to check for voltage at the terminals. If there is no voltage, the actuator will need to be replaced.

The cruise control computer may be faulty: The computer is the electronic control unit that regulates the cruise control system. It can be tested by disconnecting the cruise control wiring harness from the computer and using a multimeter to check for power and ground. If there is no power or ground, the computer will need to be replaced.

The cruise control wiring may be damaged: The cruise control wiring can be damaged due to corrosion, wear and tear, or a rodent infestation. It can be tested by inspecting the wiring for damage. If the wiring is damaged, it will need to be repaired or replaced.

How do I fix my 2000 Ford Expedition cruise control?

To fix your 2000 Ford Expedition cruise control, you will need to identify the cause of the problem. Once you have identified the cause, you can take the appropriate steps to fix it.

If the cruise control switch is faulty, you will need to replace it. To do this, you will need to remove the steering wheel and the cruise control switch. Once the switch is removed, you can install the new switch.

If the cruise control actuator is faulty, you will need to replace it. To do this, you will need to remove the throttle body and the cruise control actuator. Once the actuator is removed, you can install the new actuator.

If the cruise control computer is faulty, you will need to replace it. To do this, you will need to remove the instrument cluster and the cruise control computer. Once the computer is removed, you can install the new computer.

If the cruise control wiring is damaged, you will need to repair or replace it. To do this, you will need to inspect the wiring for damage and make the necessary repairs or replacements.

How can I prevent my 2000 Ford Expedition cruise control from breaking down?

There are a few things you can do to prevent your 2000 Ford Expedition cruise control from breaking down.

Regularly inspect the cruise control system for damage: Look for signs of corrosion, wear and tear, or a rodent infestation. If you see any damage, have it repaired or replaced as soon as possible.

Don’t use the cruise control on rough roads: The cruise control can be damaged if it is used on rough roads. If you have to use the cruise control on a rough road, use it at a low speed and avoid sudden acceleration or deceleration.

Don’t use the cruise control in stop-and-go traffic: The cruise control can be damaged if it is used in stop-and-go traffic. If you have to use the cruise control in stop-and-go traffic, use it at a low speed and be prepared to take your foot off the gas pedal if necessary.

What are the symptoms of a bad cruise control on a 2000 Ford Expedition?

There are a few symptoms that may indicate that your 2000 Ford Expedition cruise control is bad.

The cruise control will not engage:

The cruise control will not disengage:

The cruise control will not maintain a constant speed:

The cruise control will accelerate or decelerate suddenly:

The cruise control will make a buzzing or whining noise:

If you experience any of these symptoms, you should have your cruise control system inspected by a qualified mechanic.

What are the risks of driving with a bad cruise control on a 2000 Ford Expedition?

There are a few risks associated with driving with a bad cruise control on a 2000 Ford Expedition.

You could lose control of your vehicle: If the cruise

Similar Posts

2003 Ford Expedition Rear Heat Not Working [Easy Steps]

2003 Ford Expedition rear heat not working. Possible causes include a faulty blower motor, resistor, or blend door actuator.

2008 Ford Expedition Blower Motor Not Working [How To Fix It]

2008 Ford Expedition blower motor not working Check the blower motor fuse, blower motor resistor, and blower motor relay. If all of these are good, the blower motor may need to be replaced.

Ford Expedition Power Running Boards Not Working? Here’s the Fix!

Expedition power running boards not working may be caused by a faulty wiring harness, a bad motor, or a tripped circuit breaker. Check the wiring harness for damage, disconnect and reconnect the motor, and reset the circuit breaker to troubleshoot the issue.

2003 Ford Expedition Automatic Lights Not Working [Causes & Proven Solutions]

The automatic lights on a 2003 Ford Expedition may not be working due to a faulty headlight switch, a problem with the wiring, or a bad ground. To troubleshoot the issue, start by checking the headlight switch and the wiring. If both are in working order, you may need to have the lights re-aligned or replaced.

Sync Not Working? Here’s the Fix!

Sync not working on Ford Expedition

If your Ford Expedition Sync system is not working, there are a few things you can check

Make sure that the system is turned on. Check the fuses for the Sync system. Make sure that the Bluetooth connection is properly configured. Reset the Sync system. If the problem persists, take your vehicle to a Ford dealer for service.

2015 Ford Expedition Blower Motor Not Working? Fix It Now!

2015 Ford Expedition blower motor not working

The blower motor in a 2015 Ford Expedition may not work due to a faulty blower motor resistor, a bad blower motor relay, or a wiring problem. To diagnose the issue, you will need to test the blower motor, the blower motor resistor, and the blower motor relay.

Leave a Reply Cancel reply

Your email address will not be published. Required fields are marked *

Save my name, email, and website in this browser for the next time I comment.

5 Reasons Why Your Cruise Control Stopped Working

• Updated: March 15, 2023

It would be difficult to find a vehicle on the road today without cruise control. This invaluable feature makes driving long distances easier but can also cause trouble when it malfunctions. Understanding the reasons your cruise control stopped working ensures that you can get the problem fixed quickly for a more enjoyable ride. 

While this fault can cause issues with the cruise control system itself, there could also be an effect on the acceleration of your vehicle. That’s why you want to have it looked at as soon as you notice a problem. Let’s take a quick look at the reasons your cruise control may have stopped working.

Reasons Why Your Cruise Control Stopped Working

The most common reason a cruise control stops working is due to a blown fuse or a defective brake pedal switch . It can also be caused by issues with the throttle control system or the ABS. In older cruise control systems, it can be caused by a broken vacuum line.

Here is a more detailed list of the possible reasons your cruise control is not working:

1. Blown Fuse

All electrical systems in the vehicle are controlled by fuses. Your cruise control system is attached to a fuse that can blow if there is a short circuit or fault. Without a good fuse, the cruise control system can’t work at all.

Thankfully, it’s not difficult to find and replace a blown fuse. Look in the owner’s manual to find the fuse that corresponds with the cruise control technology. 

2. Defective Brake Pedal Switch

The brake pedal switch is responsible for turning the brake lights on and off based on the pedal position. Cruise control systems are designed to disengage whenever your brake pedal gets pressed. 

Because the cruise control is wired into the brake pedal switch, any fault can cause it to stop working. When the brake pedal switch malfunctions, the car believes the brakes are engaged, causing the system to turn off automatically. Not only that, but your car’s brake light might also be stuck on, leaving confused drivers in your wake. 

3. Malfunctioning Speed Sensor

Speed sensors are located on every wheel or differential. The purpose of these sensors is to monitor the speed of the wheels to determine if traction control is needed. 

The speed sensors are also part of the cruise control system. When a sensor fails, the cruise control can stop working and the speedometer might act strange as well. 

If there is an issue with a speed sensor, it will often show with an ABS warning light or a check engine light on the dashboard.

RELATED: 3 Symptoms of a Bad ABS Wheel Speed Sensor

4. Electrical Issues

The cruise control system is electronic, with many components working together to make the system operate. If the cruise control fails to work, you want to check the wiring harness and associated connectors for a fault.

You also need to ensure that the voltage source is supplying enough power to the system. Even the smallest fault can cause defects with the cruise control. In many cases, there can be an issue with the cruise control lever or buttons causing the cruise control to not engage.

If your cruise control buttons are located on the steering wheel it could also be caused by a bad clock spring, which is located behind the steering wheel.

Check the system with an OBD2 scanner to look for any trouble codes related to the cruise control.

RELATED: 5 Symptoms of a Broken Clock Spring, Location & Replacement Cost

5. Damaged Vacuum Actuator, Hoses or Cable (Older cruise control)

If you drive an older vehicle with cruise control, you might have an issue with the vacuum actuator or the cable that connects to the throttle. If there has been damage done to the vacuum hoses or the actuator, the cruise control will stop working altogether.

Additionally, the cable linking the actuator to the throttle must be in good shape. If it has been broken, the cruise control will fail. 

What is Cruise Control?

Cruise control is a feature that is used when you are traveling at a consistent speed. Cruise control was first introduced for automobiles in the 1950s. However, it took many years before it became a staple in the modern vehicle.

This electrical system allows you to set a predetermined speed and take your foot off of the gas pedal. If you are on a long drive, there is less fatigue because you don’t have to try to maintain your speed. Cruise control can also benefit fuel economy because the vehicle uses less fuel when traveling steadily. 

In newer cars, you might be able to find adaptive cruise control , which is a smart technology. Adaptive cruise control allows you to travel at a predetermined speed, but it also helps to maintain a safe distance from the vehicles in front of you with the help of sensors. With conventional cruise control, you need to take over when the car in front of you slows down, but that’s not the case with adaptive cruise control. 

There are also vehicles nowadays with not only cruise control, but fully self-driving vehicles . We will most likely see much more of this in the future.

Cruise Control Repair Cost

The cost to repair your cruise control system depends on what caused it to fail. If you need to replace a cruise control or brake switch, you might spend between $125 and $350, including parts and labor. However, the cost to change a fuse is only a few dollars and you can perform the replacement yourself in just a matter of seconds. 

On the other hand, when something major fails, such as the actuator, you could be looking at a much higher repair bill. In some vehicles, the cost to replace a cruise control actuator can cost more than $700. These costs rise if you drive a luxury vehicle or one that is difficult to get parts for. 

It might not seem immediately important for you to fix the broken cruise control, but this defective system can affect other performance aspects. You could start to notice issues with acceleration or have trouble with the speedometer. To play it safe, it’s always best to have the cruise control repaired as soon as you notice a problem.

Is there a fuse for the cruise control?

Yes. If the cruise control is installed from the factory, you should check your car’s owner’s manual for the fuse location. If it’s an aftermarket cruise control, you’ll need to follow the wires to find the fuse.

Does the brake switch affect the cruise control system?

Yes. The brake switch affects the cruise control system. The brake switch sends a signal to the cruise control system to let it know when the brakes are being applied for the engine to know when it should stop accelerating.

Will the cruise control work if the check engine light is on?

The cruise control function will be disabled when the check engine light is on in most car models, even if the cause of the check engine light is not the cruise control itself. This is mainly due to safety reasons.

Can a vacuum leak affect cruise control?

Older vehicles use vacuum to control the throttle for the cruise control, and in this case a vacuum leak can heavily affect the cruise control. However, modern cruise controls are fully electric and in most cases will not be affected by a vacuum leak if the check engine light is not illuminated.

Although many people may think that the cruise control system is unimportant and not worth spending money to repair, the problem can be caused by a faulty part that will affect the engine’s performance or durability. Therefore, it is best not to ignore the problem if your cruise control is not working without first diagnosing the car properly.

If your cruise control still isn’t working after trying all the tips in this article, it’s probably time to take it in for a professional opinion from a mechanic. It may be a more serious problem that requires replacement parts or repairs. In the meantime, drive safe and enjoy the open road!

Learn more:

• Brake Lights Not Working But Tail Lights Are? (How to Fix)
• Tail Lights Not Working But Brake Lights Are? (How to Fix)
• Brake Lights Stay On? (5 Causes & How to Fix it)

Categories: Electric , Troubleshooting

Related Posts

Latest Posts

• The Best & Worst Years Of Ford Explorer
• Best & Worst Years Of Toyota Corolla
• Best & Worst Years of Toyota RAV4
• When Should Your Child Switch To A Forward-Facing Car Seat?
• The Best & Worst Years Of Toyota Camry
• I Accidentally Put Premium Gas In My Car, What To Do?

Truck of Mine

reliving the truck passion

Ford Cruise Control Troubleshooting & How-to Guide

Ford’s adaptive cruise control is a game-changer when it comes to safe driving. Not only does it help to maintain the approved safe distance from other cars, but it also helps you control your speed when on busy roads or the highways. This gives you a better driving experience overall and decreases your chances of getting into an accident.

How to activate cruise control on a Ford

• Press the ON/OFF button on the steering wheel.
• Then cruise to the speed you wish to be at and Press SET.
• Take your foot off the accelerator and press the car icon on the steering wheel to set the minimum desired gap.

Note: There are four different gap options from close to further away. The more lines on the screen, the further the distance.

• When the cruise control is active, green light with a clock, car, and arrow will appear on the dash.

How to use Ford cruise control with a start and stop

The adaptive cruise control makes driving easier because it eliminates the need to readjust cruise control speed constantly. It uses an intuitive system that automatically adjusts speed to maintain a set distance from slower-moving vehicles ahead. When traffic speed increases, the cruise control system resumes the designated speed.

Press the up and down arrows on your steering wheel cruise control switch to set a gap distance. Use the short, solid arrow above to decrease the following distance. Use the longer arrow below to increase the following distance.

You can cancel at any time by hitting the brake or pressing the cancel button on the steering wheel. They will then return the vehicle to its previously set speed and gap settings when pressing the Resume button.

Note: There are four gap distance settings. One bar indicates the shortest following distance available, while four bars indicates the longest distance.

How to Switch between Normal and Adaptive Cruise Control

• Use the arrow pad on your steering wheel to select “Driver Assist” on your vehicle’s information display.
• Select Cruise Control> Adaptive to enable Adaptive Cruise Control.
• Select Cruise Control> Normal to return to conventional cruise control.

How to deactivate Ford cruise control

Press the brake pedal or cancel on the steering wheel. Refer to the manual to locate the cruise control ON/OFF button.

What Ford models have adaptive cruise control?

Not all Ford vehicles come equipped with the Adaptive Cruise Control features. Additionally, the feature may have varying capabilities on different car models. Below is a list of Ford car models the have the cruise control either as a standard feature or an optional feature;

• Transit Connect
• F-150 Raptor
• F-250, F-350, F-450

How to safely test Ford cruise control

Press the cruise OFF button and hold it down. Then cycle the ignition key from RUN to OFF to RUN quickly without starting the engine. The cruise control indicator light will flash once to indicate that you have successfully entered the test mode.

Ford cruise control troubleshooting

The cruise control module can malfunction from time to time. When this happens, you should determine the issue before trying to fix it. This will enable you to figure out if the problem is as simple or a fuse or a vacuum leak.

Follow these steps to troubleshoot the cruise control;

Start by opening the fuse panel under the steering wheel. Pull up on the fuse panel release lever and then pull the fuse panel down.

Then check the brake lights and cruise control fuses. You can refer to the diagram on the fuse panel cover to locate these fuses. The cruise control system will not work if the cruise control module fuse is burnt or damaged. And the brake lights won’t work if the brake’s fuse is damaged.

Start the vehicle and monitor the vacuum lines on the intake and brake booster to check for a vacuum leak. This air leak will cause the cruise control system to malfunction as the cruise control will not control the vehicle speed efficiently. Also, check for a rough idle and a “sucking” sound coming from the engine bay while running. This is also an indication of a vacuum leak.

Then check to see if the throttle cable is damaged or frayed as this may also prevent the cruise control from working efficiently when controlling the throttle.

Finally, shut off the vehicle and disconnect the negative battery cable. Then loosen the retaining nut on the negative battery cable and slide the cable off the cable clamp. Remove the steering wheel column cover in place and pull the cover off the steering column with your fingers.

Unplug the electrical plug from the cruise control switch. And remove the screws holding the cruise control stalk to the steering column. Inspect the cruise control module and combination stalk. You use a working stalk to determine if the cruise control module or existing stalk is damaged.

Symptoms of a bad cruise control switch

This is the switch that controls various functions of the cruise control system. The switch is mounted on the steering wheel, and it houses all the other cruise control’s controls. When this switch is damaged, it may prevent the proper functioning of the cruise control. Here are the signs of a failing cruise control switch.

The cruise control light doesn’t illuminate

The light should light up immediately after activating the system to let the driver know that the cruise control system has been activated. If the light does not turn on, then the LED indicator controller may be damaged.

The vehicle cannot maintain set speed or acceleration

Irregular speed acceleration is a sign of a failing cruise control switch. The system is designed to control the vehicles speed at a predetermined speed. Lack of speed maintenance or speed acceleration beyond the set speed is a sign of a damaged cruise control switch.

Note: if your cruise control switch is damaged, have a trained professional fix or replace it. Running a self-diagnostic and fixing the switch may void the warranty. You may also end up damaging other components of the cruise control system.

Check this too: Popular 2017 Ford Escape Problems To Look Out For

Ford adaptive cruise control problems and their fixes

Here are some common cruise control issues and the most probable fixes when your vehicle is experiencing cruise control problems.

Issue: Your truck’s cruise control isn’t working at all

• Check the fuse, horn relay fuse, and cigarette lighter fuse to ensure they are not damaged.
• Inspect the throttle actuator cable to see if it is broken or disconnected from the throttle.
• Check the brake light bulbs to ensure they are not burnt out.

Issue: The cruise control won’t disengage when the pedal is pushed

Fix:  Check the brake light switch, fuse, and wiring.

Issue: Some switches work, and some don’t

Fix: Check the switches. They are the most likely culprit and need to be replaced.

Issue: The cruise control system loses speed up long or steep hills

• Turn off overdrive when going on up steep hills. It may help.
• Check the vacuum check valve in the Servo feed line if your truck loses speed on smaller hills.
• Check the vacuum reservoir tank for leaks.

Reasons Why the Cruise Control is Not Working

If your cruise control is not working, you can look at several items to verify the problem. This, in turn, makes it easy to repair. Below are the main reasons why your cruise control is not working;

Brake Light Switch – The cruise control system is automatically cancelled by depressing the brake. Some Ford vehicles can disengage cruise control if the brake light switch cannot be detected.

Brake Lights – The cruise control is designed to become disabled when the brake light is blown.

Fuses and Relays – A blown fuse or damaged relay will affect the cruise control.

Spiral Cable –A faulty spiral cable will prevent the switch from contacting the CCM.

Control Switch – If the internal contacts wear out, the cruise control switch may not contact the CCM. This might disable cruise control altogether, or it might not react to the cancel or accelerate functions.

Check Engine Light – This is an indicator of a failing engine or fuel pump, which may, in turn, affect acceleration while cruising.

Vacuum Leak – A vacuum leak may affect the vehicle’s ability to control the throttle body during cruise control operation. If there is a leak due to a cracked hose or tube, the cruise control system will not work.

Vehicle Speed Sensor – Ford vehicles are fitted with multiple vehicle speed sensors (VSS). The CCM might use a VSS feed from the ECM, instrument cluster, or transmission. If a speed sensor is damaged, the CCM can’t detect vehicle speed, thereby disabling the cruise control system.

Electrical Problems – Check for continuity to ensure power is remitted as it should.

Note: do not under any circumstance if it is faulty. If the cruise control system is defective, it may not cancel on demand, which will create a safety hazard for you or others on the road. Additionally, hire a trusted mechanic to carry out the diagnosis and repair of the cruise control system.

How do I know if my cruise control module is bad?

The most common sign is the inability to use it to activate cruise control. It may also fail to perform various adaptive cruise control functionalities such as distance and speed maintenance. The failure to deactivate cruise control is also a sign of a failing cruise control module.

Is it expensive to fix cruise control?

On average, it will cost you between $150 and $350 to repair the adaptive cruise control. This depends on the parts needed and the labour costs. The car model also affects the sot of the components required to fix your cruise control. The price may also vary depending on your location. Anticipate a higher price markup if you live in a big city.

Introduction

• About This Manual
• Symbols Glossary
• Data Recording
• Perchlorate
• Ford Credit
• Replacement Parts Recommendation
• Special Notices
• Mobile Communications Equipment
• Export Unique Options

Environment

• Protecting the Environment

At a Glance

• At a Glance - ST
• Instrument Panel

Child Safety

• General Information
• Installing Child Restraints
• Booster Seats
• Child Restraint Positioning
• Child Safety Locks
• Principle of Operation
• Fastening the Seatbelts
• Seatbelt Height Adjustment
• Seatbelt Warning Lamp and Indicator Chime
• Seatbelt Reminder
• Child Restraint and Seatbelt Maintenance
• Seatbelt Extensions
• Personal Safety System™

Supplementary Restraints System

• Driver and Passenger Airbags
• Front Passenger Sensing System
• Side Airbags
• Driver and Passenger Knee Airbags
• Safety Canopy™
• Crash Sensors and Airbag Indicator
• Airbag Disposal

Pedestrian Protection

• Pedestrian Alert System
• What Is 911 Assist
• Emergency Call Requirements
• Emergency Call Limitations

Keys and Remote Controls

• General Information on Radio Frequencies
• Remote Control
• Replacing a Lost Key or Remote Control
• Creating a MyKey
• Clearing All MyKeys
• Checking MyKey System Status
• Using MyKey With Remote Start Systems
• MyKey – Troubleshooting

Doors and Locks

• Locking and Unlocking
• Keyless Entry (If Equipped)
• Power Liftgate
• Passive Anti-Theft System
• Anti-Theft Alarm (If Equipped)

Steering Wheel

• Adjusting the Steering Wheel - Vehicles With: Manual Adjustable Steering Column
• Adjusting the Steering Wheel - Vehicles With: Power Adjustable Steering Column
• Audio Control
• Voice Control
• Cruise Control - Vehicles With: Lane Centering
• Cruise Control - Vehicles With: Cruise Control
• Cruise Control - Vehicles With: Stop and Go
• Information Display Control
• Heated Steering Wheel

Wipers and Washers

• Windshield Wipers
• Windshield Washers
• Rear Window Wiper and Washers
• Lighting Control
• Instrument Lighting Dimmer
• Headlamp Exit Delay
• Daytime Running Lamps - Vehicles With: Configurable Daytime Running Lamps
• Daytime Running Lamps - Vehicles With: Daytime Running Lamps (DRL)
• Front Fog Lamps (If Equipped)
• Adaptive Headlamps
• Direction Indicators
• Interior Lamps
• Ambient Lighting - Vehicles With: 8 Inch Center Display Screen (If Equipped)
• Ambient Lighting - Vehicles With: 10.1 Inch Center Display Screen (If Equipped)

Automatic High Beam Control

• What Is Automatic High Beam Control
• Switching Automatic High Beam Control On and Off
• Automatic High Beam Control Indicators
• Overriding Automatic High Beam Control

Windows and Mirrors

• Power Windows
• Global Opening (If Equipped)
• Exterior Mirrors - Excluding: ST
• Exterior Mirrors - ST
• Interior Mirror
• Moonroof (If Equipped)

Instrument Cluster

• Warning Lamps and Indicators
• Audible Warnings and Indicators

Information Displays

• Personalized Settings
• Information Messages

Climate Control

• Automatic Climate Control
• Hints on Controlling the Interior Climate
• Rear Passenger Climate Controls
• Heated Windshield
• Heated Rear Window
• Heated Exterior Mirrors
• Remote Start (If Equipped)

Interior Air Quality

• What Is the Cabin Air Filter
• Locating the Cabin Air Filter
• Replacing the Cabin Air Filter
• Sitting in the Correct Position
• Head Restraints
• Manual Seats
• Power Seats
• Memory Function
• Heated Seats
• Climate Controlled Seats (If Equipped)

Garage Door Opener

• Universal Garage Door Opener
• Auxiliary Power Points
• Wireless Accessory Charger (If Equipped)

Storage Compartments

• Cup Holders
• Center Console
• Overhead Console

Starting and Stopping the Engine

• Ignition Switch (If Equipped)
• Keyless Starting
• Starting a Gasoline Engine
• Starting a Hybrid Electric Vehicle System
• Engine Block Heater

Unique Driving Characteristics

• Auto-Start-Stop (If Equipped)
• Hybrid Vehicle Operation - 3.3L, Hybrid Electric Vehicle (HEV)
• Hybrid Vehicle Frequently Asked Questions - 3.3L, Hybrid Electric Vehicle (HEV)

Fuel and Refueling

• Safety Precautions
• Fuel Quality - E85
• Fuel Quality - Gasoline
• Fuel Filler Funnel Location
• Running Out of Fuel
• Refueling - Excluding: Hybrid Electric Vehicle (HEV)
• Refueling - Hybrid Electric Vehicle (HEV)
• Fuel Consumption

Engine Emission Control

• Emission Law
• Catalytic Converter

High Voltage Battery (If Equipped)

Transmission.

• Automatic Transmission

Four-Wheel Drive (If Equipped)

• Using Four-Wheel Drive
• Hints on Driving With Anti-Lock Brakes
• Electric Parking Brake
• Hill Start Assist

Reverse Brake Assist

• What Is Reverse Brake Assist
• Reverse Brake Assist Precautions
• Switching Reverse Brake Assist On and Off
• Overriding Reverse Brake Assist
• Reverse Brake Assist Indicators

Reverse Brake Assist – Troubleshooting

• Reverse Brake Assist – Information Messages
• Reverse Brake Assist – Frequently Asked Questions

Traction Control

• Using Traction Control

Stability Control

• Using Stability Control

Hill Descent Control

• What Is Hill Descent Control
• Switching Hill Descent Control On and Off
• Setting the Hill Descent Speed
• Hill Descent Control Indicator

Parking Aids

• Rear Parking Aid
• Front Parking Aid (If Equipped)
• Side Sensing System (If Equipped)
• Active Park Assist (If Equipped)
• Rear View Camera
• 360 Degree Camera (If Equipped)

Cruise Control

• What Is Cruise Control
• Switching Cruise Control On and Off
• Setting the Cruise Control Speed
• Canceling the Set Speed
• Resuming the Set Speed
• Cruise Control Indicators

Adaptive Cruise Control

• How Does Adaptive Cruise Control With Stop and Go Work
• What Is Adaptive Cruise Control With Lane Centering
• What Is Intelligent Adaptive Cruise Control
• Adaptive Cruise Control Precautions - Vehicles With: Lane Centering
• Adaptive Cruise Control Precautions - Vehicles With: Stop and Go
• Adaptive Cruise Control Limitations - Vehicles With: Lane Centering
• Adaptive Cruise Control Limitations - Vehicles With: Stop and Go
• Switching Adaptive Cruise Control On and Off
• Setting the Adaptive Cruise Control Speed
• Setting the Adaptive Cruise Control Gap
• Overriding the Set Speed
• Adaptive Cruise Control Indicators - Vehicles With: Intelligent Adaptive Cruise Control
• Adaptive Cruise Control Indicators - Vehicles With: Lane Centering
• Adaptive Cruise Control Indicators - Vehicles With: Stop and Go
• Switching From Adaptive Cruise Control to Cruise Control
• Switching Lane Centering On and Off
• Switching Intelligent Mode On and Off
• Adjusting the Set Speed Tolerance

Adaptive Cruise Control – Troubleshooting

• Adaptive Cruise Control – Information Messages - Vehicles With: Lane Centering
• Adaptive Cruise Control – Information Messages - Vehicles With: Intelligent Adaptive Cruise Control

Adaptive Cruise Control – Information Messages - Vehicles With: Stop and Go

Driving aids.

• Driver Alert
• Lane Keeping System
• Blind Spot Information System
• Cross Traffic Alert
• Traffic Sign Recognition
• Pre-Collision Assist

Drive Mode Control

• What Is Drive Mode Control
• Selecting a Drive Mode

Drive Modes

• Deep Snow/Sand

Load Carrying

• Rear Under Floor Storage (If Equipped)
• Luggage Covers (If Equipped)
• Roof Racks and Load Carriers
• Towing a Trailer
• Trailer Sway Control
• Recommended Towing Weights
• Essential Towing Checks
• Towing the Vehicle on Four Wheels

Driving Hints

• Reduced Engine Performance
• Economical Driving
• Cold Weather Precautions
• Breaking-In
• Driving Through Water

Roadside Emergencies

• Roadside Assistance
• Hazard Flashers
• Fuel Shutoff
• Jump Starting the Vehicle
• Collision, Damage or Fire Event
• Post-Crash Alert System
• Transporting the Vehicle

Customer Assistance

• Getting the Services You Need
• In California (U.S. Only)
• The Better Business Bureau (BBB) Auto Line Program (U.S. Only)
• Utilizing the Mediation/Arbitration Program (Canada Only)
• Getting Assistance Outside the U.S. and Canada
• Ordering Additional Owner's Literature
• Reporting Safety Defects (U.S. Only)
• Reporting Safety Defects (Canada Only)
• Fuse Specification Chart
• Changing a Fuse

Maintenance

• Opening and Closing the Hood
• Under Hood Overview - 2.3L EcoBoost™
• Under Hood Overview - 3.0L
• Under Hood Overview - 3.3L
• Engine Oil Dipstick - 2.3L EcoBoost™
• Engine Oil Dipstick - 3.0L
• Engine Oil Dipstick - 3.3L
• Engine Oil Check
• Oil Change Indicator Reset
• Changing the Engine Air Filter - 2.3L EcoBoost™
• Changing the Engine Air Filter - 3.0L
• Changing the Engine Air Filter - 3.3L
• Engine Coolant Check
• Automatic Transmission Fluid Check
• Brake Fluid Check
• Power Steering Fluid Check
• Changing the 12V Battery
• Adjusting the Headlamps
• Washer Fluid Check
• Fuel Filter
• Checking the Wiper Blades
• Changing the Front Wiper Blades
• Changing the Rear Wiper Blades
• Changing a Bulb

Vehicle Care

• Cleaning Products
• Cleaning the Exterior
• Cleaning the Engine
• Cleaning the Windows and Wiper Blades
• Cleaning the Interior
• Cleaning the Instrument Panel and Instrument Cluster Lens
• Cleaning Leather Seats
• Repairing Minor Paint Damage
• Cleaning the Wheels
• Vehicle Storage

Wheels and Tires

• Using Summer Tires
• Using Snow Chains
• Tire Pressure Monitoring System
• Changing a Road Wheel
• Technical Specifications

Capacities and Specifications

• Engine Specifications - 2.3L EcoBoost™
• Engine Specifications - 3.0L, ST
• Engine Specifications - 3.0L
• Engine Specifications - 3.3L, Gasoline
• Engine Specifications - 3.3L, Hybrid Electric Vehicle (HEV)
• Transmission Specifications - ST
• Motorcraft Parts - 2.3L EcoBoost™
• Motorcraft Parts - 3.0L
• Motorcraft Parts - 3.3L
• Vehicle Identification Number
• Vehicle Certification Label
• Transmission Code Designation
• Capacities and Specifications - 2.3L EcoBoost™
• Capacities and Specifications - 3.0L
• Capacities and Specifications - 3.3L, Gasoline
• Capacities and Specifications - 3.3L, Hybrid Electric Vehicle (HEV)
• Bulb Specification Chart

Connected Vehicle

• What Is a Connected Vehicle
• Connected Vehicle Requirements
• Connected Vehicle Limitations

Connecting the Vehicle to a Mobile Network

• What Is the Modem
• Enabling and Disabling the Modem
• Connecting FordPass to the Modem
• Connecting the Vehicle to a Wi-Fi Network - Vehicles With: SYNC 3
• Connected Vehicle – Troubleshooting - Vehicles With: Modem
• Connected Vehicle – Troubleshooting - Vehicles With: SYNC 3

Vehicle Wi-Fi Hotspot

• Creating a Vehicle Wi-Fi Hotspot
• Changing the Vehicle Wi-Fi Hotspot Name or Password

Audio System

• Digital Radio (If Equipped)
• Satellite Radio
• Using Voice Recognition
• Entertainment
• Navigation (If Equipped)
• Electric Vehicle Information
• SYNC™ 3 Troubleshooting
• Accessories
• Ford Protect

Scheduled Maintenance

• General Maintenance Information
• Normal Scheduled Maintenance
• Special Operating Conditions Scheduled Maintenance
• Scheduled Maintenance Record
• Electromagnetic Compatibility
• End User License Agreement
• Declaration of Conformity
• Declaration of Conformity - Vehicles With: SYNC 3
• Type Approvals

Adaptive Cruise Control – Troubleshooting - Adaptive Cruise Control – Information Messages - Vehicles With: Stop and Go

2020 Explorer Owner's Manual

• Search forums
• Check out FordLightningForums.com!
• Ford Expedition Forum
• 2nd Gen - 2003 - 2006

cruise control not working

• Thread starter josephmast94
• Start date Aug 6, 2015

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

• Aug 6, 2015

josephmast94

Active member.

I have an 05 e.b. that had no c.c. when I bought it, tring to find out why. It does nothing at all when I try to engage it, have checked a few fuses I read about online but they seem fine, although I'm not sure I'm even looking at the right one. Have also tried the self test but nothing happens (no blinks form the light).  

Full Access Members

there are two fuses in the circuit Fuse #5 and #2 You should be able to see their location if you have the owners manual if not let me know. You could be having a problem with the deactivator switch or the brake pedal position switch. How well can you read and understand wiring diagrams? When checking fuses use a meter Do not just look at them.  

Bedrck47 said: there are two fuses in the circuit Fuse #5 and #2 You should be able to see their location if you have the owners manual if not let me know. You could be having a problem with the deactivator switch or the brake pedal position switch. How well can you read and understand wiring diagrams? When checking fuses use a meter Do not just look at them. Click to expand...

I am sending you a private message  

• Aug 7, 2015

jt_armstrong

Would be interested to see if you have success in resolving. My CC has never worked since I owned the car. Fuses are good. Sent from my SM-G900T using Tapatalk  

I have an '05 as well, and when I bought it I couldn't get the CC to turn on. I used an MX OBDLink MX with FORScan on Windows to troubleshoot it, and it turned out that my ON switch on the steering wheel was bad. All switches worked, as I was able to see the inputs on the PCM with FORScan, but the ON switch would only register if I pressed hard in one corner.  

• Aug 12, 2015

I had to replace my cruise switches also.  

• Aug 13, 2015

My steering wheel switch was bad as well. As a matter of fact, most of the switches on the sterring wheel were bad. I'm a cheap SOB so instead of buying new switches, I took them off. I then used a metal pick (screwdriver looking thing with a pointy end) and placed it inside the switch. There are 2 metal pads that touch each other when you press the button. I scraped them both with the metal pick. Guess they get corroded. Worked like a champ.  

Well, it's definitely worth trying to fix the old switches, a new set of switches are 200-250 bucks!  

• Aug 14, 2015

I've found many steering wheel switches killed by people that drink sodas or coffee while driving and spill half of it onto the steering wheel and associated switches. Many times just spraying out the switches with contact cleaner will bring 'em back to life. Always my first go-to fix. -Mike  

Similar threads

• Creedmoor2644
• Aug 18, 2024

• SunnySunshine
• May 6, 2024
• 4th Gen - 2018 - 2024
• May 29, 2024
• Aug 13, 2024
• Mar 1, 2024

Latest posts

• Latest: duneslider
• 18 minutes ago
• Latest: jg8000
• 29 minutes ago

• Latest: LokiWolf
• Today at 1:30 PM

• Latest: BigOleFordFan
• Today at 12:09 PM

• Latest: 2018ExpyPlatinum
• Today at 10:50 AM

Members online

• GixxerJasen
• 2020FordRaptor
• tongwang1982
• nationalgallery

Forum statistics

Share this page.

• This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register. By continuing to use this site, you are consenting to our use of cookies. Accept Learn more…