tour ad di torque

Graphite Design Tour AD DI Shaft Review – Specs, Flex, Weight

We usually try to reserve judgment of a shaft until later in the review.

But this time, we’re breaking character by claiming in the introduction that the Graphite Design Tour AD DI is a truly remarkable shaft.

We’ll reserve the details for later in the review but we will say that we can clearly see why some of the most prolific Tour Pros game these shafts.

If you haven’t considered the Graphite Design Tour AD DI shaft for your woods you need to read this review and then go get a fitting.

Graphite Design Tour AD DI Shaft Overview

Let’s start with looks.

It appears as though Graphite design puts all their time and effort into engineering and saves money on their design department.

The shaft, which is available in a black or orange color scheme, looks busy. The midsection is lousy with logos and lettering.

We prefer the black and white finish to the gaudy orange and white color scheme.

The Graphite Design Tour AD DI is available in a dizzying array of weights and flexes.

The weight ranges from 54g to 97g. Graphite Design seemingly wanted to appeal to as many golfers as possible and they have succeeded.

No matter what your swing speed is, you can pick up a Graphite Design Tour AD DI shaft in a weight that works for you.

The feel of this shaft is definitely active. The kick point is advertised as mid; but we would actually say that it is a bit closer to the butt than true mid.

Why is the Graphite Design Tour AD DI So Popular?

When a shaft is used by players like Tiger Woods, it’s going to get some attention.

The Graphite Design Tour AD DI has been used by some of the biggest names in golf; but there are weights and flexes for us mortals too.

How Does the Graphite Design Tour AD DI Perform?

Depending on which weight class you choose, you’re either going to get a high or mid launch from this shaft.

The amazing thing about it though is that even the lightest version of the Graphite Design Tour AD DI can produce low spin rates.

In our test session, we never saw the spin rates exceed 2000 RPM’s. For the most part, spin was relegated to the 1800-1900 RPM range.

The stiff tip section also kept dispersion very tight. Our offline divergence never drifted into the double-digit (yards) range.

Carry distance was good too. After three swings each, we were averaging 268.8 yards. The Graphite Design Tour AD DI ticked nearly all of the boxes for us.

Graphite Design Tour AD DI Shaft Specs

What flexes are available what swing speeds do they suit.

Lite flex is suitable for 71-85 MPH swingers.

Regular flex is good for 86-95 MPH swingers. Players in the 92-98 MPH range should check out the Graphite Design Tour AD DI in stiff/regular flex.

Stiff flex may be suitable for players in the 96-105 MPH range. Extra stiff is for players in the 100-105 MPH range. Tour extra stiff should work for players swinging their driver 110+ MPH.

What Weights Are Available? What Swing Speeds Do They Suit?

The Graphite Design Tour AD DI is available in a wide variety of weights.

If you’re in the 70-85 MPH swing speed range, you’re probably going to want to stay between 54 and 64 grams.

86-95 MPH swingers will want to stay within the 75-85 gram weight class. For 96+ MPH swingers, there is the 86-97 gram weight class.

Why is it So Good?

The Graphite Design Tour AD DI is a rare combination of active profile, long carry distance, low spin rates and tight dispersion.

This is a combination that works for almost every kind of player.

The Graphite Design Tour AD DI is an amazing shaft because it will improve your drive distance while delivering a very smooth, satisfying feel.

And while it makes it easy to take your most powerful swing, it keeps the ball on-line.

Graphite Design Tour AD DI First Impressions

Our first impression of the Graphite Design Tour AD DI was that it felt very smooth.

While we wouldn’t say it is as smooth as the Mitsubishi Tensei shafts, it is still amazingly fluid for having such an active profile.

Key Features & Performance

The Graphite Design Tour AD DI utilizes aerospace-grade, high modulus 50-ton carbon fiber in order to stiffen the tip section.

While the mid and butt sections are of medium stiffness, the tip is stiff in order to promote acute club head control.

This is part of what produces such tight shot dispersion.

Graphite Design Tour AD DI Driver Review

When plugged into our driver, the Graphite Design Tour AD DI felt incredibly easy and smooth to swing.

It can stand up to a really heavy load and the release feels phenomenally fluid. The dispersion is tight enough to keep you out of the trees but there is also some workability for better players.

Graphite Design Tour AD DI Fairway Wood Review

When we plugged the Graphite Design Tour AD DI into a 3-wood, we still got tight dispersion whether we were swinging from the box or off the deck.

Graphite Design Tour AD DI Pros & Cons

Wide variety of weights
Good for fast or slow swingers
Tight dispersion
Mid/high launch
It’s very expensive

Overall Score: 98/100

Check out more reviews here:.

Who Should Buy it?

Firstly, you’ll need deep pockets to score the Graphite Design Tour AD DI.

We’ve not seen it retail for any less than $200 (new). But in this case, you get what you pay for. The Graphite Design Tour AD DI is a phenomenal shaft that can work for all swing speeds and tempos.

Project X Cypher Shaft Vs Riptide Even Flow Comparison

Nippon Modus 105 Vs Dynamic Gold Mid 100 Shaft Comparison

Project X Denali Blue 60TX Shaft Review - Specs, Flex, Weight

Fujikura 2024 Ventus Blue Shaft Review - Specs, Flex, Weight

Project X Cypher Vs HZRDUS Smoke Shaft Comparison

Mitsubishi Tensei Vs Project X Cypher Shaft Comparison

Tour AD DI Hybrid Shaft Review - Specs, Flex, Weight

Nippon Modus 105 Vs Project X 5.5 Shaft Comparison

Dynamic Gold X100 Vs Project X 6.5 Shaft Comparison

© 2022 Amazon Associates Program. Golf Blue Heron is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. *Amazon and the Amazon logo are trademarks of Amazon.com, Inc., or its affiliates.

Best Golf Products
Garmin s60 vs Garmin s40 vs Garmin s20
Golf Driver Comparisons
Golf Iron Comparisons
Home Of Golf
Putt-A-Bout Indoor Putting Mat Review

Ventus Blue vs Tour AD DI: What are the Differences?

Choosing the right golf shaft can significantly impact your performance on the course.

Among the high-end options, Fujikura’s Ventus Blue and Graphite Design’s Tour AD DI stand out as two of the most popular choices.

Both shafts are designed to enhance your game but also cater to different preferences and playing styles.

This guide provides a detailed comparison of the Ventus Blue and Tour AD DI, covering specifications, performance characteristics, and pricing to help you make an informed decision.

Overview of Ventus Blue

The Ventus Blue shaft by Fujikura is part of the Ventus line, which also includes Ventus Red and Ventus Black, designed to suit a variety of player profiles.

The Ventus Blue is known for its mid-launch and mid-spin characteristics, making it a versatile choice for a wide range of golfers.

Key Features

VeloCore Technology: The Ventus Blue incorporates Fujikura’s proprietary VeloCore technology, which enhances stability and energy transfer, leading to more consistent ball flights.
Multi-Material Construction: The shaft uses a combination of advanced materials to optimize performance, including high-modulus carbon fibers.
Torque and Flex: The Ventus Blue is available in various flexes (R, S, X) and weights (50g, 60g, 70g), with torque values varying by weight class to provide the desired feel and performance.

Specifications

Weight: 50g, 60g, 70g
Flex Options: Regular (R), Stiff (S), Extra Stiff (X)
Torque: 3.1° to 4.1° depending on weight
Launch: Mid

Overview of Tour AD DI

Graphite Design’s Tour AD DI (Deep Impact) shaft is renowned for its premium quality and performance, favored by many professional golfers.

It is designed to deliver a high launch and low to mid spin, making it ideal for players looking to maximize distance and control.

DI Technology: The Tour AD DI features a unique material technology that enhances the shaft’s energy transfer for greater distance and accuracy.
Premium Materials: It uses high-quality graphite and other composite materials to achieve its distinctive performance characteristics.
Torque and Flex: Available in multiple flexes (R, S, X) and weights (50g, 60g, 70g), the shaft’s torque values are fine-tuned for optimal feel and stability.
Torque: 3.2° to 4.4° depending on weight
Launch: High
Spin: Low to Mid

Performance Comparison

When comparing the Ventus Blue and Tour AD DI, it’s essential to understand how their distinct designs translate to on-course performance.

Here’s a detailed look at various performance aspects:

Launch Angle

Ventus Blue: Known for its mid-launch characteristics, the Ventus Blue is suitable for golfers seeking a balanced trajectory. It helps achieve a penetrating ball flight that can be beneficial in various playing conditions.

Tour AD DI: This shaft is designed for a high launch, which can be advantageous for golfers looking to maximize carry distance. The higher launch angle is also useful in achieving a softer landing on the green.

Ventus Blue: Offers mid-spin rates, providing a good blend of control and distance. This makes it versatile for different shot shapes and playing conditions.

Tour AD DI: Known for low to mid spin rates, the Tour AD DI helps reduce unwanted side spin, leading to straighter shots. The lower spin can also contribute to additional roll-out on the fairways.

Feel and Stability

Ventus Blue: The VeloCore technology in Ventus Blue enhances the feel and stability, particularly on off-center hits. Golfers often describe it as smooth and stable, offering consistent performance.

Tour AD DI: The Tour AD DI is celebrated for its smooth feel and responsiveness. It provides a more pronounced kick-through impact, which many golfers find beneficial for added distance.

Forgiveness

Ventus Blue: Thanks to its VeloCore technology, the Ventus Blue offers a higher level of forgiveness, helping to maintain ball speed and accuracy even on off-center hits.

Tour AD DI: While also forgiving, the Tour AD DI’s design focuses more on maximizing distance and control, with a slightly lower emphasis on forgiveness compared to the Ventus Blue.

Price Comparison

Pricing is crucial when choosing between the Ventus Blue and Tour AD DI. Both shafts are premium products with a higher price tag than standard offerings.

Ventus Blue: Typically priced around $350 to $400, Ventus Blue is positioned in the premium segment, reflecting its advanced technology and materials.

Tour AD DI: Often priced slightly higher, around $450 to $500, its cost reflects its popularity among professional golfers and its high-performance capabilities.

Choosing the Right Shaft

Selecting between the Ventus Blue and Tour AD DI depends on your specific needs and preferences as a golfer.

Player Profile

The Ventus Blue is deal for players looking for a balanced trajectory with mid-spin and high forgiveness. It suits a wide range of golfers, from mid-handicappers to professionals.

On the other hand, Tour AD DI is best for golfers seeking a high launch with low spin, prioritizing distance and control.

It’s particularly favored by skilled players who can benefit from its performance characteristics.

Swing Characteristics

Ventus Blue is suitable for players with moderate swing speeds who need a stable and forgiving shaft that provides a consistent ball flight.

Tour AD DI is great for players with higher swing speeds who want to maximize their distance through a higher launch and lower spin.

Course Conditions

The Ventus Blue is versatile enough for various conditions, providing a reliable mid-trajectory that performs well in wind and varying terrain while Tour AD DI is excellent for courses where high launch and distance are crucial, such as longer, more open layouts.

Both the Ventus Blue and Tour AD DI are exceptional golf shafts, each with unique features and performance benefits.

The Ventus Blue offers a balanced approach with mid-launch and mid-spin, enhanced by VeloCore technology for superior stability and forgiveness.

On the other hand, the Tour AD DI provides a high launch with low to mid spin, favored by professionals for its distance and control.

Understanding your own game, including your swing speed, launch preferences, and typical course conditions, will guide you in choosing the right shaft.

Both options come at a premium price, reflecting their advanced design and materials, ensuring that either choice will be a valuable addition to your equipment.

Want to Get Better at Golf?

Get "ben hogan's five lessons" and join thousands of others improving their golf skills..

Learn the Fundamentals: Stance and Posture > Golf Grip > The Swing.

This book has LOADS of positive reviews. THOUSANDS OF REVIEWS. A MILLION COPY SOLD. CHEAP!

Graphite Design Tour AD DI Shaft - Full Description

FULL DESCRIPTION

The Tour AD DI “DEEP IMPACT” is designed to provide golfers with more power and stability in a golf shaft. Designed and manufactured exclusively at the Graphite Design factory headquarters in Japan, the Tour AD DI shafts are available in 50g R2(Lite), R1(Regular) and S flex, 60g SR (Stiff Regular), S and X flex, 70g S, X and TX (Tour X-Stiff) flex, 80g S, X and TX flex and 90g X flex.

The Tour AD DI 5-R2, R1 and S flex, 6-SR, S and X flex, 7-S and X flex and 8-S and X are available in two color schemes of orange with white bands and green rings and a 2nd color option of black with white bands and silver rings. The Tour AD DI 7-TX, 8-TX and 9-X flex shafts are available only in the orange color scheme.

The Tour AD DI is our first shaft design that was integrated with Toray Company’s original NANOALLOY material technology in the tip section of the shaft. This material technology has now come to be known as “DI Technology”. This unique material technology promotes additionally shaft stability without the loss of feel and allows the player to create greater club head speed and thus greater ball speed while still providing exceptional feel and control.

TECHNOLOGY & FEATURES

DI TECHNOLOGY- Consisting of the advanced, 3rd generation of Toray Composites Nano-Alloy Material Technology for increased stability in the mid to tip region and unsurpassed feel.
50 ton premium, aerospace quality carbon fiber materials.
Graphite Design Proprietary Material Stiffness Integration (MSI) design philosophy.

BEND PROFILE

PERFORMANCE

Designed to promote Mid/High to High launch angles with Low to Low/Mid ball spin rates.

SPECIFICATIONS

Your cart is empty

Subtotal: $0.00 CAD

Visit our support center

Expert help & advice

Check your order status

Updates & tracking

Return Policy

All you need to know

Meet the Team

Some of us may have paws

Golf Insider

Fairway Woods
Range Finders
Training Aids
Reviews A-Z
Instruction
Performance
PGA Champions Tour

Graphite Design Tour AD DI Shaft Review

Introduction.

The 2024 Graphite Design Tour AD DI shaft is a high-performance golf shaft that is designed to help golfers hit the ball longer and straighter. It is made from high-quality materials, including Torayca T1100G carbon fiber and nanoalloy. These materials make the shaft strong, lightweight, and durable.

Table of Contents

The Tour AD DI shaft is available in a variety of weights and flexes to suit all types of golfers. It is also available in a variety of colors, including black, orange, and blue.

The Tour AD DI shaft is a popular choice among professional golfers and tour players. It is also a good choice for amateur golfers who are looking for a high-performance shaft that will help them to improve their driving distance and accuracy.

Which Type of Golfer Does It Cater To?

The Graphite Design Tour AD DI shaft is a versatile shaft that can be used by golfers of all skill levels. However, it is especially well-suited for players with faster swing speeds and/or those who are looking for a high launch and low spin. The DI shaft is also a good choice for players who are looking for a smooth and stable feel.

Model Breakdown

The Graphite Design Tour AD DI shaft is available in a variety of models, each with its own unique characteristics. The most popular models include:

The standard model, which is designed to provide a high launch and low spin, with a smooth and stable feel.

Tour AD DI-6

A stiffer version of the standard model, designed for players with faster swing speeds.

Tour AD DI-6X

The stiffest version of the DI shaft, designed for players with the fastest swing speeds.

The Graphite Design Tour AD DI shaft features a number of technologies that make it one of the most popular shafts on the market. These technologies include:

Torayca T1100G carbon fiber: This ultra-high modulus carbon fiber provides exceptional strength and stability.
Fast Taper Technology (FTT): This technology reduces the taper of the shaft in the midsection, which results in a smoother and more powerful release.
Nanoalloy: This material is added to the shaft to improve its durability and reduce vibration.

The Graphite Design Tour AD DI shaft is available in a variety of weights and flexes to suit all types of golfers. The following table shows the available specs:

Pros & Cons

The Graphite Design Tour AD DI shaft has a number of pros and cons, which are summarized below:

High launch and low spin
Smooth and stable feel
Durable and vibration-resistant
Available in a variety of weights and flexes
Can be expensive
Not suitable for all golfers, especially those with slower swing speeds

Player/User Comments

Here are some positive player/user comments about the Graphite Design Tour AD DI shaft:

“I love the Tour AD DI shaft! It gives me the high launch and low spin that I need to hit long, straight drives.” “The Tour AD DI shaft is the best shaft that I have ever used. It feels great and it helps me to hit my driver more consistently.” “I have been using the Tour AD DI shaft for a few months now and I am very impressed. It has helped me to improve my driving distance and accuracy.” “The Tour AD DI shaft is a bit expensive, but it is worth the investment. It is a high-quality shaft that will last for many years.” “I am a high handicapper, but I still find the Tour AD DI shaft to be very playable. It helps me to hit my driver more consistently and it has also helped me to improve my distance.”

The 2024 Graphite Design Tour AD DI shaft is one of the most popular shafts on the market for a reason. It is a versatile shaft that can be used by golfers of all skill levels and it offers a number of benefits, including a high launch, low spin, smooth feel, and durability. If you are looking for a new shaft for your driver, the Tour AD DI is definitely worth considering.

Mitsubishi MMT Iron Shaft Review

Aerotech SteelFiber Putter Shaft Review

Fujikura Ventus Black Driver Shaft Review

Graphite Design Tour Ad Di 6 vs. 7: Which Shaft to Choose?

When searching for one of the most popular and selling shafts, Graphite Design Tour will come up in the top position. Two of their popular shafts are Di 6 and 7. So, what is the difference between graphite design tour ad di 6 vs 7?

The first and one of the most key differences between these two shafts is the launch angle; Graphite Design Tour Ad di 6 have a high launch angle compared to the mid-high of the Di 7.

This is just one of the differences between these shafts, and there are a few more we need to talk about. So, keep on reading to learn about all the differences between them.

Overview Of graphite design tour ad di 6 shafts

More strength and stability are provided by the Tour AD DI 6 shaft. The shaft’s tip part was created by incorporating the latest nanomaterial tech from Toray .

Every player will be able to have an enormous influence on ball speed while still exhibiting excellent feel and control thanks to this innovation.

Read Also: Who Makes Kirkland Golf Clubs? Know The Hidden Truth!

Overview Of graphite design tour ad di 7 shafts

The Graphite Design Tour AD DI 7 shafts have a similar design lineup as other tour AD DI shafts.

But, the Tour AD DI 7’s mid bend shape enables optimum shaft loading while maintaining a stiff solid tip portion during impact.

This will produce the best possible low spin and mid to high launch characteristics. Additionally, the Graphite Design Tour AD DI will therefore take players’ shaft performance to a whole new level.

Graphite design tour ad di 6 vs 7: Comparison Table

In our comparison table below, you can see all the primary differences between the AD DI 6 and 7 shafts. Keep on reading to know more.

Read Also: Project X Hzrdus Smoke Green Vs Black: Which Golf Shaft Is Better?

What Are The Differences Between Graphite Design Tour AD DI 6 and 7

You have already seen the basic differences between these two shafts. Now, we will break down these differences in full detail. This complete comparison will help you make the final decision more quickly.

Flex Option

The first difference between the AD DI 6 and 7 shafts is the choice of flex. AD DI 6 offers three different types of flex; Regular, Stiff, and X-Stiff and AD DI 7 has two flex options: Stiff and X-Stiff.

The quicker your swing, the stronger the flex you require, as golf shafts bend according to how quick your club speed is. So, you should select the shaft based on the sort of swing you have.

AD DI 6 is required if you desire regular flex, which means you have a slower swing speed. However, you can pick either of the shafts if you need stiff or X-stiff.

Another common difference between these two shafts is the different weight options they offer.

The AD DI 6 shaft has lower weight options; of 64, 65, 67, and 68.5 grams, and the AD DI 7 shaft has comparatively higher weight options of 74, 75, and 77 grams.

Your swing path is improved with a heavier shaft and you use more muscle when you play with a heavier shaft.

The route of the shaft on the downswing should originate from within the aiming reticle for every 10 grams of weight.

However, using a heavier shaft might be challenging for beginners. Therefore, you should determine the shaft weight based on whether you are a beginner or a professional player.

Read Also: Dynamic Gold 105 Vs Modus 105: Which Is Better For Distance?

Even though the difference in the launch is not that significant between these two shafts. It is still important as even the slightest difference in launch can play a huge role in overall ball flight and distance.

There are Mid High launch angle choices for both AD DI 6 and AD DI 7. The Mid choice will keep the ball somewhat lower off the tee, while the Mid-High option will help gain a bit extra height underneath the ball.

However, the AD DI 6 also has a High option. While the AD DI 7 has a Mid option. Conversely, a high launch driver enables golfers with slower swings to produce soaring shots for maximal carry distance.

Therefore, you may choose the shaft that is best for you based on where you want the impact to be.

Spin is another important consideration while selecting the shaft. Different shafts offer different types of spin, and the same goes between AD DI 6 and AD DI 7.

The AD DI 6 shaft offers two different spin options; Low Mid and Low, and the AD DI 7 shaft offers low spin only. The low mid spin has a slightly higher spin than the low spin.

Generally, a low-spin driver can lower your spin rates resulting in a more piercing launching if your swing speed is quick and your ball rises in the air.

Read Also: Kirkland Putter vs Scotty Cameron: Here Is The Better One to Choose

A machine that measures shaft torque tracks how much a shaft will twist in response to a specific quantity of force and does so in degrees.

Depending on what type of flex you choose, these two shafts also have a difference in torque.

Graphite Design Tour AD DI 7 has torque in the range of 3.1-3.2 degrees compared to the 3.3-3.4 degrees of the AD DI 6 shaft. So, when playing shot, the AD DI 7 will have less twisting than the AD DI 6.

Graphite design tour ad di 6 or 7: Which Golf shaft To choose?

The Graphite Design Tour AD DI 6 and 7 are both excellent golf shafts and among the highest sold shafts worldwide.

Thus, selecting a clear winner between them isn’t an easy task. It all depends on what your requirements are.

If you are looking for a shaft with a heavier weight for more carry and low spin only, then the AD DI 7 is the one to go for.

However, if you want a shaft with more flex options, low mid and low spin, then the AD DI 6 shaft is the one to go for.

Read Also: Wedge Swing vs Iron Swing: Here Is The Difference You Need

Down below, we will discuss all the faqs related to our today’s discussion comparing AD DI 6 and 7 shafts.

Does AD DI 6 have a higher torque than AD DI 7?

The Graphite Design Tour AD DI 6 has a higher torque than the AD DI 7. So, it means that the AD DI 6 shaft will have more twisting than the DI 7 shaft under pressure. Generally, the lower the torque, the less amount of twisting will be faced by the shaft.

AD DI 6 Vs AD Di 7 which has a higher weight?

Both of these shafts come with different weight options; the AD DI 6 offers four different options, and AD DI 7 offers three different weight options. But in comparison, the AD DI 7 shaft has a higher weight range than the other option.

Are AD DI 6 and AD DI 7 both beginner friendly shafts

Both of these shafts are beginner friendly shafts as they are made from premium materials. They are very durable and less prone to breaking. However, as the AD DI 7 has a higher weight, it can be a bit difficult for beginners to control compared to the AD DI 6.

Meet Jalal, a passionate golf writer and the driving force behind Golfertroop.com, your go-to destination for all things golfing! Whether you’re a seasoned golfing veteran or a beginner taking your first swing, Jalal is here to assist you in making the most out of your golfing experience.

Lamkin vs. Golf Pride: The Ultimate Golf Grip Comparison!

A great golf grip is absolutely essential to your overall performance. One simple grip can distinguish between a perfect shot and a colossal blunder. Golf…

Scotty Cameron 009 Vs. Newport: Which Golf Putter to Choose?

Scotty Cameron has been creating one of the finest milled putters in the world for over 25 years. The circle T-009 and the Newport putter…

Can You Bring Your Own Golf Clubs To TopGolf? Know All Facts!

It sounds good to have fun with friends and sharpen your golfing skills at the same time at TopGolf. Thus, while planning a visit to…

When Do Golf Courses Close For The Season- including All USA States

As a golf enthusiast, knowing the availability of the golf course is very necessary. Golf can be a very seasonal sport all around the world….

Ping G400 Max Vs G425 Max: Which Golf Driver to Choose?

Have you been looking for an excellent driver to hit the maximum distance out of the golf shot? Ping’s G400 and G425 Max drivers might…

Where are Snell Golf Balls Made? Unveiling the Truth

Snell Golf is a name that has gained popularity in a very short period of time for making top-notch golf balls. They even appeared in…

Graphite Design Tour AD DI vs IZ: Which Shaft Wins?

Golfers are always on the lookout for equipment that can give them an edge on the course, and choosing the right shaft can make a big difference in their game. Two popular options on the market are the Graphite Design Tour AD DI and the Tour AD IZ shafts.

The main things that set apart the AD DI and Tour AD IZ shafts are weight ranges, torque ratings, and kickpoints. Tour AD DI is heavier with higher torque, resulting in mid-to-high kickpoint and ball flight. Where the Tour AD IZ has wider weight range, lower torque, and mid kickpoint, giving a mid-launch trajectory.

In this Tour AD DI vs IZ guide, we’ll take a closer look at these two shafts and help you determine which one might be the best fit for your game.

overview of Graphite Design Tour AD DI golf shaft

The Tour AD DI (Deep Impact) golf shaft is a high-performance aftermarket shaft designed and manufactured by Graphite Design, a renowned Japanese company known for producing premium golf shafts.

The Tour AD DI series is specifically engineered to provide golfers with exceptional performance, including improved distance, trajectory control, and shot-shaping capability. Some Key Features include:

The Tour AD DI shaft is made from high-quality carbon-fiber materials, featuring a combination of aerospace-quality 50t and 40t carbon-fiber pre-preg.

This results in a lightweight yet highly durable shaft that promotes optimal energy transfer for better ball speed and accuracy.

Graphite Design’s proprietary Material Stiffness Integration (MSI) technology is used to optimize the stiffness and torque of the shaft.

This technology helps to improve overall shaft performance, ensuring a consistent feel and enhanced shot control.

Bend Profile

The Tour AD DI shaft has a mid-bend profile with a slightly softer tip section, which promotes a higher launch angle and increased spin for maximum carry distance.

The mid to stiff butt section provides stability and control during the swing, reducing unwanted twisting and promoting accuracy.

Flex Options

The shaft is available in various flex options, ranging from R (Regular) to X (Extra Stiff), catering to golfers with different swing speeds and skill levels.

Customization

Graphite Design offers a variety of custom options, including length, tipping, and various colors, enabling golfers to personalize their shafts to fit their individual preferences and requirements.

Tour-proven performance

The Tour AD DI shaft has been used by numerous professional golfers worldwide, attesting to its high quality and performance capabilities.

overview of Graphite Design Tour AD IZ golf shaft

The Tour AD IZ (Into the Zone) golf shaft is another high-performance aftermarket shaft designed and manufactured by Graphite Design, a leading Japanese company known for producing top-quality golf shafts.

The Tour AD IZ series is specifically engineered to provide golfers with exceptional performance in terms of distance, accuracy, and shot consistency. Some Key Features include:

The Tour AD IZ shaft is made from premium carbon-fiber materials, utilizing a combination of high-modulus, aerospace-quality 50t and 40t carbon-fiber pre-preg.

This results in a lightweight and durable shaft that maximizes energy transfer for increased ball speed and accuracy.

Graphite Design’s proprietary Material Stiffness Integration (MSI) technology is employed to optimize the stiffness and torque of the shaft.

This technology enhances overall shaft performance, ensuring a consistent feel and improved shot control.

The Tour AD IZ shaft features a unique bend profile with a firm butt section, a firm center section, and a slightly softer tip section.

This design promotes a mid-launch angle with low to mid spin, providing golfers with a penetrating ball flight and optimal distance.

Graphite Design offers a range of custom options, including length, tipping, and a variety of colors, enabling golfers to personalize their shafts to fit their individual preferences and requirements.

The Tour AD IZ shaft has been adopted by numerous professional golfers worldwide, attesting to its high quality and performance capabilities.

Tour AD DI vs iZ: What are the differences?

Here’s a comparison table to give you an at-a-glance understanding of the differences and similarities between the Tour AD DI and Tour AD IZ shafts.

Now, let’s dive deeper into the comparison between the Tour AD DI and Tour AD IZ shafts in a more conversational tone.

Both the Tour AD DI and Tour AD IZ shafts are made with the same top-notch aerospace-grade carbon fiber materials. They’re lightweight, strong, and really durable.

Graphite Design, the company behind these shafts, also uses its special Material Stiffness Integration (MSI) technology to give these shafts their unique performance characteristics.

When it comes to flex, both the Tour AD DI and Tour AD IZ shafts have got you covered. They offer a wide range of flex options such as R2 (Senior), R1 (Regular), SR (Stiff Regular), S (Stiff), and X (Extra Stiff).

So, whatever your swing speed or playing style, there’s likely a flex option that’s perfect for you.

Now, this is where things get interesting. The Tour AD DI shafts have a weight range of 50 to 80 grams, depending on the flex you choose. On the other hand, the Tour AD IZ shafts weigh between 40 and 85 grams.

That difference in weight might not seem like much, but it can really affect the swing weight and feel of your golf club.

When it comes to length, both the Tour AD DI and Tour AD IZ shafts are available in the standard lengths you’d expect for drivers, fairway woods, and hybrids.

If you’re looking for something a little more customized, you might be able to get a custom length upon request.

If you’re wondering about torque, Tour AD DI shafts have a torque rating that ranges from 4.5 to 6.6 degrees.

The Tour AD IZ shafts, on the other hand, have a torque rating between 3.3 and 6.5 degrees. This difference in torque can impact the feel and stability of the shaft during your swing.

The kickpoint, or bend profile, of a shaft, is important because it affects the trajectory of your shots. The Tour AD DI shaft has a mid-to-high kickpoint, which promotes a mid-to-high ball flight.

In contrast, the Tour AD IZ shaft has a mid kickpoint, providing a mid-launch trajectory. Depending on your swing and desired ball flight, one of these profiles might suit you better.

Brand reputation

Graphite Design is a highly respected brand in the world of golf shafts, and both the Tour AD DI and Tour AD IZ shafts have garnered positive reviews and success on professional tours. You really can’t go wrong with either of these shafts when it comes to brand reputation.

As premium shafts, both the Tour AD DI and Tour AD IZ shafts come at a higher price point than some other options on the market. The exact price may vary depending on the retailer and specific model, but you can expect to pay a similar amount for both shafts.

Tip diameter

Both shafts come with a standard tip diameter of 0.335 inches for drivers and fairway woods and 0.370 inches for hybrids. This standard sizing allows for compatibility with most clubheads.

Butt diameter

The butt diameter differs slightly between the two shafts. The Tour AD DI has a butt diameter of 0.600 inches, while the Tour AD IZ has a slightly larger butt diameter of 0.602 inches. This small difference might affect the feel and grip of the shaft in your hands.

Tour AD IZ vs di: Which golf shaft wins?

Both the Tour AD DI and Tour AD IZ shafts are high-quality options made from aerospace-grade carbon fiber materials, designed to cater to a variety of player profiles. The differences between them lie mainly in their weight range, torque rating, and kickpoint.

The Tour AD DI shafts have a slightly heavier weight range and a higher torque rating, leading to a mid-to-high kickpoint for a mid to high ball flight.

On the other hand, the Tour AD IZ shafts have a wider weight range with a lower torque rating and a mid kickpoint for a mid-launch trajectory.

Ultimately, the choice between the Tour AD DI and Tour AD IZ shafts will depend on your individual swing characteristics, desired ball flight, and personal preferences.

It’s always a good idea to consult with a professional fitter or try out both shafts to find the one that best suits your specific needs and playing style.

That's me, Jerry Hall. Golf is my passion. I'm a researcher, blogger, and avid fan. My objective is to provide you with current information, advice, and resources to enhance your knowledge and enjoyment of golf.

Tour Ad DI Vs IZ; A Pro Golfer’s Comparison

Selecting the right golf shaft is crucial for achieving success on the golf course. The Tour AD DI and IZ shafts are two popular options that offer different characteristics. While both shafts have some similarities, there are significant differences that can affect a golfer’s game.

In this article, we will compare the Tour AD DI and IZ shafts and help golfers understand which shaft might be the best fit for their game.

A quick comparison table of tour ad di shaft vs tour ad iz shaft .

Note: The information in this table is based on general characteristics and may vary slightly depending on the specific model and flex of the shaft.

What to know about Tour AD DI shafts?

Tour AD DI shafts are high-performance golf shafts that are designed to provide mid-to-high launch and low spin characteristics. They are manufactured by Graphite Design, a company known for producing premium golf shafts that are popular among both amateur and professional golfers.

Characteristics of Tour AD DI shafts:

The Tour AD DI shafts have a unique bend profile that is designed to promote a smooth transition of energy and increase ball speed.

They are made from premium graphite materials and feature a low torque, high modulus design that offers superior stability and control.

The Tour AD DI shafts also have a mid-bend profile that offers a soft feel at impact and helps golfers achieve a higher launch angle.

Benefits of using Tour AD DI shafts:

The Tour AD DI shafts are an excellent choice for golfers who need help achieving a higher launch angle and lower spin. They offer a smooth feel and excellent control, allowing golfers to shape shots and control ball flight.

The Tour AD DI shafts are also suitable for players with a moderate to fast swing speed and can help increase ball speed and distance. Overall, Tour AD DI shafts are a great option for golfers looking for a high-performance shaft that can help improve their game.

Tour AD DI shafts specs

Note: The Tour AD DI shafts come in a limited range of flex options, but the mid-bend profile and tip stiffness can be customized for specific swing characteristics. Additionally, the recommended grip is a suggestion and golfers may prefer different grips based on personal preference.

What to know about Tour AD IZ shafts?

Tour AD IZ shafts are high-performance golf shafts that are designed to provide a low launch and low spin for golfers with moderate to fast swing speeds. They are also manufactured by Graphite Design, a company known for producing premium golf shafts that are popular among both amateur and professional golfers.

Characteristics of Tour AD IZ shafts:

The Tour AD IZ shafts have a unique bend profile that is designed to promote a low launch angle and low spin for golfers with higher swing speeds.

They are made from high modulus graphite materials and feature a low torque design that provides excellent stability and control. The Tour AD IZ shafts also have a mid-to-tipped bend profile that offers a more penetrating ball flight and increased distance.

Benefits of using Tour AD IZ shafts:

The Tour AD IZ shafts are an excellent choice for golfers who need help achieving a low launch angle and low spin. They offer superior stability and control, allowing golfers to shape shots and control ball flight.

The Tour AD IZ shafts are also suitable for players with a moderate to fast swing speed and can help increase ball speed and distance. Overall, Tour AD IZ shafts are a great option for golfers looking for a high-performance shaft that can help improve their game.

Tour AD IZ shafts specs

Note: The Tour AD IZ shafts come in a limited range of flex options, but the mid-to-tipped bend profile and tip stiffness can be customized for specific swing characteristics. Additionally, the recommended grip is a suggestion and golfers may prefer different grips based on personal preference.

Comparison of Tour AD DI and IZ shafts:

When it comes to golf shafts, the Tour AD DI and IZ shafts are two popular options from Graphite Design that offer different characteristics for different types of golfers. Here’s a comparison of these two shafts:

Similarities between Tour AD DI and IZ shafts:

Both the Tour AD DI and IZ shafts are made from high-modulus carbon fiber materials, which provide excellent strength, stability, and responsiveness.
Both shafts are available in a limited range of flex options (regular, stiff, extra stiff, and XX) and come in a standard length of 46 inches.
Both shafts have a butt diameter of 0.600 inches and a tip diameter of 0.335 inches.
Both shafts are designed to deliver maximum energy transfer from the golfer’s swing to the golf ball, resulting in increased distance and accuracy.

Differences between Tour AD DI and IZ shafts:

The Tour AD DI shafts have a mid bend point with a stiff tip section, while the Tour AD IZ shafts have a mid-to-tipped bend profile with a stiff tip section. This makes the Tour AD DI shafts more suitable for golfers who want a mid-high launch with low spin, while the Tour AD IZ shafts are better for golfers who need a low launch with low spin.
The torque values of the Tour AD DI and IZ shafts differ. The Tour AD DI shafts have a torque range of 3.0-1.6 degrees, while the Tour AD IZ shafts have a torque range of 3.6-2.6 degrees. This makes the Tour AD DI shafts more stable and less prone to twisting during the swing, while the Tour AD IZ shafts offer more feel and feedback.
The weight ranges of the Tour AD DI and IZ shafts also differ. The Tour AD DI shafts weigh between 50-80 grams, while the Tour AD IZ shafts weigh between 40-80 grams. This makes the Tour AD IZ shafts more suitable for golfers with moderate to fast swing speeds, while the Tour AD DI shafts are better for golfers with slower swing speeds.

Which shaft is better for which type of golfer?

Choosing between the Tour AD DI and IZ shafts depends on a golfer’s swing characteristics and personal preferences.

The Tour AD DI shafts are better suited for golfers with slower swing speeds who need help achieving a mid-high launch with low spin.

The Tour AD IZ shafts, on the other hand, are ideal for golfers with moderate to fast swing speeds who require a low launch with low spin.

Performance differences between Tour AD DI and IZ shafts:

The Tour AD DI and IZ shafts perform differently on the course due to their different characteristics. The Tour AD DI shafts tend to produce a mid-high launch with low spin, resulting in a more penetrating ball flight and increased distance. The Tour AD IZ shafts, on the other hand, deliver a low launch with low spin, which provides a flatter ball flight and increased roll out.

How Tour AD DI and IZ shafts affect ball flight and spin:

The Tour AD DI shafts produce a mid-high launch with low spin, which makes them suitable for golfers who need help achieving a more penetrating ball flight. The Tour AD IZ shafts, on the other hand, deliver a low launch with low spin, resulting in a flatter ball flight and increased roll out.

Which shaft is more forgiving on off-center hits?

Both the Tour AD DI and IZ shafts offer forgiveness on off-center hits, but the Tour AD DI shafts are

slightly more forgiving due to their mid bend point and stiffer tip section. This helps to reduce the amount of twisting or bending that occurs on off-center hits, resulting in more consistent ball flight and accuracy. However, the Tour AD IZ shafts still offer a good level of forgiveness on off-center hits, thanks to their high-modulus carbon fiber materials and stiff tip section.

In conclusion, the Tour AD DI and IZ shafts are two excellent options for golfers looking to improve their performance on the course. The Tour AD DI shafts offer a mid-high launch with low spin, making them ideal for golfers with slower swing speeds, while the Tour AD IZ shafts provide a low launch with low spin, which is better suited for golfers with moderate to fast swing speeds. Ultimately, choosing between these two shafts comes down to a golfer’s personal preference, swing characteristics, and the type of ball flight they are looking to achieve.

Discover the meticulous and expert-driven process behind our product reviews at Sportic Media. Our comprehensive guide, led by industry veterans, ensures you get the most reliable and detailed insights into golf equipment. Dive into our methodical approach by visiting How We Test Products at Sportic Media: A Comprehensive Guide .

Dustin Johnson is the founder of Sportic Media, a company focused on the golf industry. Through Sportic Media, Dustin provides marketing and public relations services to golf courses, country clubs, and golf-related businesses.

Dustin is a certified golf course superintendent, having graduated from the Golf Course Management Certification Program through the Golf Course Superintendents Association of America (GCSAA). He has worked at multiple private golf clubs, managing golf course maintenance and agronomy programs. Through Sportic Media, Dustin aims to help golf businesses thrive by providing strategic marketing and communication services. His experience as a golf course superintendent and his passion for the sport of golf fuel his mission to help grow the game he loves.

Troubleshooting Guide: Resolving Bushnell Tour V4 Rangefinder Stuck in Setup Mode

The Bushnell Tour V4 rangefinder is a golfer’s trusted companion on the course, providing accurate distance readings for precision shots. However, encountering setup mode issues can be frustrating and may hinder your golfing experience. In this comprehensive guide, we will walk you through the steps to troubleshoot and resolve the “stuck in setup mode” problem….

Scotty Cameron Newport Vs Newport 2: A Comprehensive Comparison

Scotty Cameron is a renowned brand in the world of golf, known for producing high-quality putters. The Newport and Newport 2 are two of the most popular putters in the Scotty Cameron range, and in this article, we will provide a detailed comparison of the Scotty Cameron Newport vs Newport 2. We will analyze the…

Mizuno MP 33 Specs By Sportic Media

The MP-33 had a slightly lower center of gravity compared to other blade models to help get the ball in the air a little bit easier, which is what made it so popular among better players across the board and not just touring professionals. These blades are still entirely intended for workability rather than forgiving…

Mitsubishi Tensei 1K Black Shaft Review: Unleashing Power and Precision

Let’s talk about the Mitsubishi Tensei 1K Black Shaft for golf. This quick review is here to break down the cool stuff about this golf stick. We’ll keep it simple so you can see if it’s the right fit for your game. If you like golf, you might find something interesting about the Mitsubishi Tensei…

Mizuno Pro 223 Vs JPX 921 Forged; By Sportic Media

Both the Mizuno Pro 223 and JPX 921 Forged are top-notch iron sets, but they differ in some significant ways. The Mizuno Pro 223 is a traditional muscle back iron made for expert players who value control and maneuverability. For maximum feedback and shot-shaping ability, it has a small head size, a thin topline, and…

KBS Tour 120 Vs. S300; Comparison By Sportic Media

What is the difference between the KBS Tour 120 and the S300? If we compare the KBS Tour 120 to the S300s, KBS will launch higher and have better dispersion. The S300s are weaker at 5.8, and KBS S is stronger at 6.0. The S300s would be more comparable to the KBSs at 6.1 if…

Pin It on Pinterest

Tour AD DI Hybrid Shafts

The Tour AD DI “ D EEP I MPACT” Hybrid shafts are designed to provide golfers with more power and stability in a hybrid golf shaft. Designed and manufactured exclusively at the Graphite Design factory headquarters in Japan, the Tour AD DI hybrid shafts are available are available four weight categories of 75g, 85g, 95g and 105g. The 75g and 85g shafts are available in R, S and X Flex and the 95g and 105g shafts are available in S and X Flex.

The Tour AD DI Hybrid is designed with the same performance characteristics as the Tour AD DI shafts for a mid/high trajectory with low/mid to mid spin and pin point accuracy. Players of all skill levels will benefit from the exceptional control, workability and superior performance of the Tour AD DI Hybrid shafts. The result, the Tour AD DI hybrid shaft delivers players to the next level of superior distance with consistent trajectory control and will create a “ D EEP I MPACT” on your game!

Revolutionary technology, design and the most advanced materials are trademarks in all Graphite Design shafts, making them the highest quality premium golf shafts on the market today. Validating the company’s “Tour AD” logo, all of Graphite Design’s PGA Tour-proven shafts are specifically designed to promote a gain in A ccuracy and D istance.

Features & Technology:

High modulus, premium, aerospace quality carbon fiber materials.
Graphite Design proprietary M aterial S tiffness I ntegration ( MSI ) design philosophy and technology.

Bend Profile:

Performance:

Designed to promote Mid launch angles with Low/Mid to Mid ball spin rates.

Tip Trimming for Standard Bore:

Pro’s Choice encourages consulting a PGA Professional or qualified club builder to help you determine the correct shaft and length for your swing profile and to meet your goals.
Always leave a minimum of 0.5″ of the parallel tip section of the shaft above the hosel to maintain shaft durability and prevent shaft failure/breakage. For example, if the head has a hosel bore depth of 1.5″ and the shaft has a parallel tip length of 3.0″, the tip trim length should not exceed 1.0
Improper installation may affect the intended performance of the shaft. Warranty is for material and workmanship of our products. Improper installation voids warranty of product.

Specifications:

Where to buy (click here or on map to view store locations).

Click on the map to find a location near you

Fairway Woods
Left-Hand Clubs
Alpha Headcovers
Weights/Accessories
SD Headcovers
CNC-Milled Putters
WILSON PUTTERS
2Thumb Grips
Flat Cat Putter
Garsen Putter Grips
Gravity Grip
Iomic Grips
JumboMax Grips
Lamkin Grips
Secret Grip
Star Grip (360)
Super Stroke Grips
Tacki-Mac Grips
Taylormade Grips
TourMark Putter Grips
Oversize / Jumbo
Long Putter Grips
58 Core Size
Putter Grips
360 No Logo Grips
Arthritic Grips
Belly Putter Grips
Bubble Grips
Counter Balance Grips
Hybrid Grips
Non-Tapered Grips
Ribbed / Reminder Grips
Training Grips
Wedge Grips
Aerotech Shafts
Aldila Shafts
Alpha Shafts
Apollo Shafts
Fujikura Shafts
Grafalloy Shafts
Graphite Design
Mitsubishi Shafts
Nippon Shafts
Project X Shafts
True Temper
WOOD SHAFTS
0.355" TIP SHAFTS
0.370" TIP SHAFTS
HYBRID SHAFTS
PUTTER SHAFTS
GPS / Launch Monitors
ALL RE-GRIPPING SUPPLIES
GRIP SOLVENT
SHAFT INSTALLATION
RATTLE STOP
OEM SHAFT ADAPTERS/TIP
SHAFT EXTENSIONS
Marketing Banner
4YardsMore Tees
Bionic Gloves
Check Go Pro
FootJoy Gloves
Frogg Togg/Chilly Pad
GolfDotz Ball Markers
GreenKeepers
KentWool Socks
ProPlay Wipes
Shot Navi GPS
Simarki Tees
SoftSpikes Cleats
Sunfish Headcovers
Alignment Tools
Ball Retriever
Counter Balance Weights
Cleaning Tools/Supplies
Golf Gloves
Golf Towels
On-Course Accessories
Training Tools
Golf Compression

Graphite Design Tour AD DI Hybrid Shaft

WHAT YOU NEED TO KNOW

Performance hybrid shaft
Launch trajectory range: Mid
Spin range: Low-mid to Mid
Medium firm mid section with stiff tip
Speed recommendation: 86-105+ mph

SHAFT COMPARISON

Download: Graphite Design hybrid shaft bend profile comparison
High modulus ultra premium carbon fiber