trek madone slr 7 p1

Trek Madone SLR 7 Gen 7 review - very fast and very expensive

The latest Madone may have a hole through the seat tube but we couldn't find any in its performance

• Sign up to our newsletter Newsletter

The Trek Madone is an absolute speed weapon. The deep-section tubes with the radical-looking cutout help, as does the newly designed handlebar, which is narrow and provides good wrist support for the ‘aero-hoods’ position. And then there are the 51mm deep Bontrager Aeolus Pro wheels. The handling is incredibly fast, responding to the smallest shift in weight and the tiniest tweaks of the bars, and ride quality is so impressive that it’s almost possible to overlook things like the narrow tires and ungenerous clearance - but you can’t ignore the price. If you have the budget and want a WorldTour-level race machine with exceptional handling and ride feel, this is the bike.

Super smooth ride

Light for an aero bike

Striking aesthetics

Limited adjustability

No power meter

You can trust Cycling Weekly. Our team of experts put in hard miles testing cycling tech and will always share honest, unbiased advice to help you choose. Find out more about how we test.

• Construction

Value and conclusion

For this latest Gen 7 version of the Madone, Trek’s aero bike, the US brand removed the IsoSpeed Decoupler of the previous Gen 6 model and left, in its place, a big hole.

OK, it’s not the crude, reductionist approach it sounds like.

The old bike’s micro-adjustable suspension system at the top tube/seat tube juncture added weight and was mostly redundant since Trek discovered most riders would ‘set and forget’.

And by radically reengineering the frame Trek claims to have saved 300g, and says the new bike is almost 20 watts faster than its predecessor, which equates to 60 seconds per hour when ridden at 45kph. It looks radical, too - always a good thing for a new bike.

In our 2023 Race Bike of the Year grouptest we awarded the Madone 'best aero bike' against competition that included the Cervélo S5, the Canyon Aeroad and the Giant Propel.

However, over $9K / £10K for an Ultegra bike has to be unchartered territory - so how does it compare overall to the best road bikes ?

Trek Madone 7 Gen 7: construction

Let’s peer a bit more closely into that hole or, to give it its real name, IsoFlow. The aerodynamic explanation for it is: “It’s a way to direct some high energy flow into a low energy region of the bike.” What that means is that the seat tube area creates a disproportionate amount of drag and the hole helps to dissipate this by adding what Trek calls a “jet of fast moving air.”

It turns out that only half of the claimed watt saving comes from the IsoFlow hole. Trek has entered the integrated cockpit wars (along with Colnago, Canyon, Cervélo et al) with a completely new and very slick-looking design but it’s neither adjustable nor V-shaped: according to Trek it saves watts by changing rider position rather than via the aerodynamic properties of the cockpit itself.

A standard 42cm bar becomes 39cm at the hoods and 42cm at the drops and there’s a backsweep so that a flat-forearms aero position on the hoods becomes very aero indeed.

There are 14 different combinations available and, since the backsweep gives the bar a shorter reach, it’s important to get the right one - if you’re like those of us who rode this bike, you’ll need a longer stem. You can change this at point of purchase at no extra cost, Trek told us, or the 1 1/8in steerer is compatible with a non-integrated stem and bar (though the frame is electronic groupset only).

The same goes for the seatmast. The cutout in the seat tube leaves less room for a long seatpost and less adjustability (around 6cm minimum to maximum) so if you are long-legged but prefer a smaller frame you may need the tall version that comes with the size 56 upwards (as I ideally would have done). There are also two offsets available.

Our size 54 with a standard short mast could only manage a maximum saddle height of 74cm and the reach felt very short with the 90mm stem cockpit it comes with.

The latest geometry is called H1.5 (halfway between the old H1 race and H2 endurance). The reduced reach combined with the shorter reach of the swept-back bar works very well for that super aero hoods position, but it does feel surprisingly short. The kamm-tailed rear of the stem is much closer to your knees than you’d expect.

The new SLR bikes are all made from Trek’s 800 OCLV carbon - from the 105-equipped SLR 6 up to the flagship SLR 9 - and are impressively light, especially compared with other aero bikes such as the Cervelo S5. Trek says this is its lightest ever disc Madone.

There’s clearance for 28mm tires max, which is tight by modern standards. This model comes with Bontrager Aeolus Pro 51 tubeless-ready wheels, set up with Bontrager R3 Hard-Case Lite 25mm tires and inner tubes - again, surprisingly narrow.

Despite the fact that the fit wasn’t optimal - I could have done with the size up - the ride quality of the Madone is absolutely incredible. That’s the first thing that strikes you, or rather doesn’t strike you.

Aero bikes used to supply a harsher ride simply because deep, bladed tubing doesn’t flex like round tubing. This was undoubtedly the reason why Trek bolted the IsoSpeed decoupler onto the Madone two iterations ago. So you might expect that with its suspension system gone, the latest bike might have gone backwards in comfort. Not a bit of it.

It feels like a coiled carbon spring - full of potential energy and floating over bad road surfaces seemingly without any effect on its speed. And this is on 25mm tires that aren’t even the best (at this price they really ought to be).

The handling is also exactly right. The shortish 90mm stem section of the cockpit could have made it a little twitchy, but thanks to the sweeping shape I found my weight sufficiently over the front wheel in the hoods position, and steering was fast but balanced on descents and tight corners.

So it passes ‘comfortable’ and ‘fast’ with flying colors (actually Deep Smoke for this one).

At 7.5kg it’s light for an aero bike - or any disc brake bike - and it leaps up hills as if it weighs even less. I was so impressed with its performance that I kept forgetting Trek also has the Emonda climbing bike. The next Emonda has its work cut out (pun intended).

Finally, stability in crosswinds. There’s one particular gateway on my test loop where any bike not designed for big yaw angles will be gusted and the Trek was indeed blown sideways slightly - but not alarmingly considering the deep wheels and frame tubes.

This bike is incredibly good but it’s also incredibly expensive. It’s a full $1,000 / £1,000 more than the equivalent outgoing Gen 6 Madone SLR 7, and you’d have to look hard to find a more expensive Ultegra Di2-equipped bike from the other mainstream brands. 

The Canyon Aeroad CFR with Dura-Ace costs $8,999 / £8,799, while the Cervelo S5 with SRAM Force AXS costs $9,000 / £9,200. The Giant Propel Advanced SL1 also with SRAM Force costs $8,000 / £8,999.

You might also reasonably expect a power meter at this price - those three bikes all come with them - but it’s just the regular Ultegra crankset here.

So the price is stratospheric but compared with the current aero bikes I’ve ridden so far including the Colnago V4RS , Canyon Aeroad SLX , Cervelo S5, Tarmac SL7 and Pinarello Dogma F, the ride quality is superior.

• Frame: 800 Series OCLV carbon
• Fork: KVF carbon, tapered steerer
• Groupset: Shimano Ultegra Di2
• Wheels : Bontrager Aeolus Pro 51
• Tires : Bontrager R3 Hard-Case Lite 25mm
• Cockpit: Madone integrated
• Seatpost : Madone aero internal
• Saddle: Bontrager Aeolus Elite
• Weight: 7.5kg
• Contact: www.trekbikes.com

Thank you for reading 20 articles this month* Join now for unlimited access

Enjoy your first month for just £1 / $1 / €1

*Read 5 free articles per month without a subscription

Join now for unlimited access

Try first month for just £1 / $1 / €1

Get The Leadout Newsletter

The latest race content, interviews, features, reviews and expert buying guides, direct to your inbox!

Simon Smythe is a hugely experienced cycling tech writer, who has been writing for Cycling Weekly since 2003. Until recently he was our senior tech writer. In his cycling career Simon has mostly focused on time trialling with a national medal, a few open wins and his club's 30-mile record in his palmares. These days he spends most of his time testing road bikes, or on a tandem doing the school run with his younger son.

The opening stage takes the riders from Venaria Reale to Turin

By Joseph Lycett Last updated 4 May 24

British rider remembers his victory at Paris-Roubaix juniors

By Tom Thewlis Published 4 May 24

Peloton aims to reduce annual expenses by $200 million; workforce and retail strategy most impacted

By Anne-Marije Rook Published 3 May 24

Useful links

• Tour de France
• Giro d'Italia
• Vuelta a España

Buyer's Guides

• Best road bikes
• Best gravel bikes
• Best smart turbo trainers
• Best cycling computers
• Editor's Choice
• Bike Reviews
• Component Reviews
• Clothing Reviews
• Contact Future's experts
• Terms and conditions
• Privacy policy
• Cookies policy
• Advertise with us

Cycling Weekly is part of Future plc, an international media group and leading digital publisher. Visit our corporate site . © Future Publishing Limited Quay House, The Ambury, Bath BA1 1UA. All rights reserved. England and Wales company registration number 2008885.

• Madone SLR 7 Gen 7

"Every inch an aero race bike"

"One of the most visually striking and competent aero bikes available today...More aero, less weight, less complication."

"Revolutionary"

"The brand new Trek Madone comes with a revolutionary design, but retains the neat and powerful look of its previous iterations."

"Ticks all of the boxes"

"The new design ticks all of the requisite boxes for top-tier road racing machines: Lighter-weight, more aerodynamic, and more integration."

"Lighter than ever"

"The most significant new bike to be seen [at the Tour de France] thanks to its radical aero design"

Which generation is right for you? 

Keep speed smooth with Madone Gen 6’s IsoSpeed vibration-damping tech, or go next-level with Gen 7’s aero and comfort-boosting IsoFlow.

Service manual

Time to bust out the repair stand for some maintenance? Find a detailed breakdown of your bike with part numbers, torque values, and platform-specific tech instructions below.

Madone goes green at La Vuelta

After three grueling weeks (and three stage wins), Mads Pederson wins the green jersey aboard a custom-painted Madone SLR at Vuelta.

Designing for speed

Trek's lead aerodynamicist breaks down the science behind our fastest road race bike ever.

World Champ Pedigree

Madone is the bike of choice for Mads Pedersen, UCI Road World Champion.

The always-on team

Research shows the single most impactful measure you can take to stand out to motorists is to use front and rear Daytime Running Lights. The team uses them on every training ride, any time of day—and they’ve found that these lights truly make a difference.

Product features

Unprecedented aerodynamics.

All-new aerodynamic Kammtail frame shapes, bar/stem design, and rider position make Madone SLR our fastest road race bike yet.

Exclusive IsoFlow technology

Never before seen IsoFlow technology specifically designed for the 7th generation Madone SLR shaves weight, improves aerodynamics, and smooths your ride.

Our lightest Madone disc ever

Super lightweight 800 Series OCLV Carbon and a new lightweight design make this our lightest Madone disc ever.

New ergonomic bar/stem

A newly optimized bar/stem that’s 3cm narrower in the hoods than the drops offers a more comfortable and ergonomic riding position for faster racing, improved aerodynamics, and ultimate control. Use the same bar/stem size you’re used to – if you normally ride with a 42cm bar/stem, opt for 42cm in the drops and 39cm in the hoods.

Refined integration

Every element of this bike is part of a greater whole. It has invisible cable routing, aero cockpit, hidden seatmast, and more.

Shimano Ultegra Di2

Ultegra Di2 R8100 is Shimano's most inspired drivetrain, packed with innovative, game-changing features. HYPERGLIDE+ technology allows for crisp, seamless shifts both up and down the gear range, even during maximal efforts. The new Di2 shifting system introduces Shimano's exclusive wireless integrated circuit, and the move to a 12 speed cassette ensures you have all the gearing you need. Ergonomics and aerodynamics have been enhanced at every turn, and you can set up the drivetrain just the way you like it via Shimano’s user-friendly E-Tube app.

Don’t forget your pedals

This bike doesn’t come with pedals because you’ll have a better time on your new bike if you choose your own. See the pedal guide to find the best pedals for your riding style. We recommend clipless road pedals for control and efficiency.

Invisible cable routing

The brake and shift cables of the most aerodynamic bike are routed through the frame for the ultimate in sleek, aerodynamic performance.

Carbon Care Wheel Loyalty Program

Every set of Bontrager carbon wheels is backed by the Carbon Care Wheel Loyalty Program. In the unlikely event that you damage your Bontrager carbon wheels within the first two years of ownership, we’ll repair or replace them for free.

Project One

Don't settle for anyone else's bike. Create your very own with Project One, Trek's custom bike program.

Blendr stem

Bontrager stem technology lets you clip your gear directly to the stem for clean looks, maximum user friendliness.

H1.5 geometry, developed with Trek-Segafredo pro cycling teams, puts the rider in the optimal aero race position. It’s the sweet spot for what our racers want.

Warrantied for life

Carbon wheels can lighten your ride and improve your performance—and when you ride Bontrager, your investment is protected. All Bontrager carbon wheels are backed by a lifetime warranty for the original owner.

• Go! E-bikes
• Accessories
• Find a retailer

ABOUT ELECTRA

• Electra history
• Flat Foot Technology
• Brand partners
• Electra Funbassadors
• Work at Electra
• Customer care
• Bike registration
• Manuals & user guides
• Shipping & delivery
• Newsletter signup
• Global distributors
• How to shop safely
• Privacy policy & terms of use
• Accessibility
• Cookie policy
• California Transparency Act

United States / English

• © Electra Bicycle Company 2024

• Rider Notes

2020 Trek Madone SLR 7 Disc

A carbon frame aero bike with high-end components and hydraulic disc brakes. Compare the full range

Manufacturer Price

For This Bike

View more similar bikes →

Based on frame geometry and build specs.

A bike with lower gearing will be easier to ride up steep hills, while a higher top end means it will pedal faster down hills.

Madone SLR 7 Disc

Similar Bikes

(descending)

Add custom gearing

5'1" – 5'5"

5'3" – 5'7"

5'5" – 5'9"

5'7" – 6'0"

5'10" – 6'2"

6'0" – 6'4"

6'2" – 6'6"

• 5'11", size 56cm, Fits small
• 5'7", size 52cm, Just right

What’s better than Trek’s Madone SLR? How about a Madone SLR that’s lighter? Or one with a different bottom bracket? If either of those sound good to you, then you’ll want to check out the 2021 Madone SLR. The SLR addition to the Madone name gives the indication that this isn’t your average Trek. In […]

Read Review

Dec 2019 · Symon Lewis

Cycling Weekly has shown that the Trek Madone is one of the fastest aero bikes available today, but has the update with discs made it even better? I certainly think so

Ride quality

Performance

Aug 2019 · Stu Bowers

Trek proves hands down that disc brakes, true-aero race geometry, light weight and sublime comfort no longer need to be conflicting

Incredibly comfy rear end that’s adjustable to suit rider preference

With handling to back it up

You may need to sell a kidney or remortgage the house to afford one

Jun 2019 · David Arthur @davearthur

Seriously fast aero race bike with great handling, but not the smoothest and not the ultimate spec it should be

Mar 2019 · Warren Rossiter

Winner of best superbike in our annual Bike of the Year awards is the latest evolution of Trek’s flagship aero bike

Groundbreaking comfort, stunning handling and seriously rapid

Five-figure price tag

Nov 2018 · Manuel Buck

Das Beste. The Best. Le Meilleur. The latest generation of the Trek Madone SLR 9 Disc promises to be even faster, more aerodynamic and lighter.

Jul 2018 · Dan Cavallari

Trek has fine-tuned its IsoSpeed Decoupler, improved the fit, and added disc brakes, making this edition of the Madone even better.

It might look the same on the outside, but underneath it's an all new Madone

Last updated January 28 Not listed for 1,191 days

• Road Overview
• MTB Overview
• E-Bikes Overview
• Browse by Category
• Browse by Brand
• Jackets & Vests
• Glasses & Goggles
• Protection/Armour
• Bottles & Cages
• Brakes & accs
• Drivetrain Parts
• General Accessories
• Indoor trainers/Rollers
• Lube & Cleaning products
• Panniers & Racks
• Recreational Rides
• Opening Hours
• Coffee On Pinks
• About Studio19

2024 Trek Madone SLR 7 Gen 7 (P1 Now)

• Regular price $13,799.99

The Madone SLR 7 is the ultimate race machine. An 800 Series OCLV Carbon frame with exclusive IsoFlow technology adds an aerodynamic advantage, cuts weight and smooths the road ahead. It's built up with the ultra-fast precision shifting of Shimano's wireless electronic Ultegra Di2 drivetrain and deep carbon wheels that cut through the wind.

It's right for you if...

Speed is your top priority, and you want our best aero road racing frame with all-new aero IsoFlow comfort tech to shed grams and watts. You care about the finer things, like a Shimano Ultegra Di2 electronic drivetrain that's incredibly fast and consistent in all conditions.

The tech you get

A lightweight frame with our highest-level 800 Series OCLV Carbon, new Kammtail Virtual Foil aerodynamic tube shaping, aerodynamic and road-smoothing IsoFlow technology and invisible cable routing. A wireless electronic 2x12 Shimano Ultegra Di2 drivetrain and flat-mount hydraulic disc brakes, tubeless-ready Bontrager Aeolus Pro 51 carbon wheels and an integrated OCLV Carbon bar/stem combo.

The final word

The Madone SLR is our best and lightest aero road frame, but it's the all-new IsoFlow technology that really sets this bike apart. It adds compliance for a more comfortable ride with impressive aerodynamics.

Why you'll love it

• IsoFlow technology helps the seat mast flex for a more comfortable ride while also improving frame aerodynamics and shaving weight
• Wireless Ultegra Di2 delivers fast smooth and responsive shifts
• 800 Series OCLV Carbon is the lightest laminate we’ve ever made, and it makes the Madone faster on any terrain, in any condition
• Madone Project One ICON paint schemes make the ultimate race bike a true work of art

Colour Options:

- Satin Quicksilver

- Axinite Flip/Black

- Viper Red

- Metallic Red Smoke to Red Carbon Smoke

*Please note – spec applies to all sizes unless listed separately

We reserve the right to make changes to the product information contained on this site at any time without notice, including with respect to equipment, specifications, models, colours, materials and pricing. Due to supply chain issues, compatible parts may be substituted at any time without notice.

Bike and frame weights are based on pre-production painted frames at time of publication. Weights may vary in final production.

Trek Madone 7-Series Project One - long-term review

Latest madone flagship walks a fine line between aerodynamics, stiffness and comfort.

You can trust Cyclingnews Our experts spend countless hours testing cycling tech and will always share honest, unbiased advice to help you choose. Find out more about how we test.

This article originally published on BikeRadar

Gallery: Trek Factory Racing reveal new kit design

We shared our first impressions of Trek's revamped 2014 Madone 7-Series Project One road racing flagship back in July and were generally quite happy with the experience. As always, the handling manners were impeccable, it was fairly comfortable and suitably quick under power – all while supposedly offering greatly improved aerodynamic performance over a round-tubed bike.

Several months later, our initial opinions haven't changed - if anything, they've only been reinforced. The latest Madone is Trek's best in many ways but the controversial rear brake placement hasn't won us over.

Ride and handling: telepathic handling, unflappably predictable

Our Madone reviews are starting to sound like broken records when it comes to describing the handling but given that it's so perennially exceptional, that's hardly a bad thing. When it comes to neutral handing, this really is the quintessential sweet spot between stability and agility. Calm high-speed manners inspire supreme confidence when bombing descents and yet the Madone is still amply quick to turn in when the corners start coming fast and furious. Simply lean it over, set an edge and rail through – often with no need to hit the brakes either.

Fit and rider positioning is still spot-on as well. We went with the more aggressive H1 geometry here with its lower front end and longer top tube, and found it just right when going hard. We've sampled the slightly more relaxed H2 version too, and found it provided a noticeably more upright ride but without compromising the superb handling.

As claimed, ride quality has improved over last year's version. It's a subtle change that many might not even notice, however, and we still wouldn't characterize the latest Madone's feel as pillowy smooth. It's exceptionally well damped and glides across good road surfaces without feeling overly isolating but neither end gives much on bumps of any size.

That being said, it rides quite well for a top-end machine whose primary intent is racing, particularly compared to other aero road machines that can sometimes be downright harsh. At least on the generally good roads we used during testing, the Madone is an easy machine to ride all day.

Overall stiffness is what we've come to expect from the Madone. Excellent front triangle rigidity lends extra precision and confidence to the handling traits, plus it makes for a solid feel when muscling the bars during out-of-the-saddle sprints and climbs. Rear end stiffness can't quite keep up with the front end but it's very good nonetheless and contributes to a generally sprightly and eager feel overall.

And have we mentioned yet that the new Madone is also light? Our complete test sample came with a custom Project One spec that includes a Shimano Dura-Ace 9000 mechanical group, Bontrager Aeolus 3 D3 carbon clinchers, and carbon fibre Bontrager finishing kit. The total weight for a 52cm size without pedals is a wispy 6.32kg (13.93lb). Actual weight of our 52cm frame is similarly svelte at 840g (with rear derailleur hanger and bolt-on housing stops) and the matching fork adds just 340g (195mm steerer, no plug).

Trek even claims some impressive aerodynamic savings over the previous round-tubed Madone: 25 watts at 40km/h, or about two minutes per hour.

So the latest Madone is stout under power, handles supremely well, reasonably comfortable, very light, more aerodynamic than before and puts its rider in a perfect position. What's not to like?

Unfortunately, it's that pesky rear brake.

Trek believes putting the rear brake caliper under the chainstays has multiple benefits. We're not convinced

Trek says the relocation of the rear caliper beneath the chainstays provides several benefits. For one, the chainstays are far bigger and stiffer than the seatstays so in theory, they should make for a more solid foundation and increased braking power. Moving the brake down below also frees up designers to slim down the seatstays for improved ride comfort, plus it cleans up the shape for supposedly reduced aerodynamic drag.

Despite the bridgeless seat stay design and their relatively slim profile, the Madone isn't appreciably more comfortable than other top competitors. The down-below location is also prone to road spray and debris kicked off of the front wheel, plus it's a very awkward location for maintenance. And while we didn't notice any unusual brake rub during our first few rides during the summer, we ultimately got several different wheelsets (including the stock Bontrager ones) to consistently contact the pads under hard efforts, even with relatively generous pad rim clearances.

The revamped brake location may very well over some measurable benefits but even so, we remain unconvinced that they outweigh the real-world drawbacks.

Frame: lightweight with proven OCLV construction

The Madone may not fit the mould of what many expect to see in a supposedly aerodynamic road bike but that's due to its Kamm tail design. Instead of complete airfoil sections, the Madone instead uses clipped profiles that are said to offer similar aerodynamic benefits while still maintaining more traditional aspect ratios for good stiffness and ride qualities – both of which the Madone has in good quantities.

As is the trend with most modern carbon road frames these days, there are no abrupt profile changes, overly sharp edges or wacky shapes built into the design. Instead, Trek has maintained a more engineering-centric philosophy with gentle transitions throughout. Also present are the company's long-standing Madone frame features, such as the extra-wide BB90 bottom bracket shell with drop-in bearings, correspondingly wide down tube and chain stay spacing, a tapered 1 1/8 to 1 1/2in head tube (again, with bearing seats moulded directly into the structure to save weight), and an integrated no-cut seatmast topped by a Bontrager moulded carbon fibre head.

Other niceties include a built-in chain catcher, the Duotrap integrated optional wireless speed and cadence sensor, carbon fork tips and rear dropouts, and internal cable routing that's convertible for mechanical or electronic drivetrains. None of the internal paths are fully guided but even so, we found servicing to be a pretty straightforward process as long as you're careful to first run a section of housing through before pulling out the old inner wires. More importantly, the paths are straight and direct so there's no penalty in friction as compared to an external setup.

The built-in chain catcher is a nice touch

We did encounter one unfortunate manufacturing related hiccup during our time with the Madone: a fork tip that was a touch too long, which kicked the front wheel off-axis if we pulled the axle completely in – not a lot, mind you, but enough that we noticed. We ended up having to ship our test bike back to Trek, where 0.5mm was ground off of one dropout to correct the misalignment. All was good afterward but this is not exactly what you want to see on a bike costing upward of US$10,000.

Equipment: flawless Shimano Dura-Ace 9000 group and fantastic Bontrager bits

Whatever gripes we can air on the rear brake position and fork tip alignment, we have nothing but positive things to say in regards to the new Shimano Dura-Ace 9000 group . It's utterly brilliant in every way that matters and corrects every mis-step of the previous 7900 package.

Shift quality is superb, with smooth and dependable changes under full power – especially up front, which is still best in class. Lever action is light, enviably precise, and silky smooth, plus Shimano has given back the ability to downshift three rear gears in a sweep. Lever ergonomics are also fantastic, with a smooth shape that falls naturally in your hands and a reach adjustment that's usable without detracting from the keen aesthetics.

Despite the unusual rear caliper placement and uncommon direct mount fitment, brake performance is excellent with ample power, a solid-feeling lever, and good control – provided you take the time to resurface the stock carbon-specific Bontrager cork pads. The rear quick-release that's built into the head tube stop is a little awkward to use during a wheel change but thankfully, we never really had to since the Bontrager Aeolus 3 D3 rims are roughly the same width as the 25mm tyres we used primarily during testing.

We had excellent luck overall with Bontrager's latest 35mm-deep carbon clinchers, which are admirably rigid, lightweight, reasonably stable in crosswinds, and seemingly durable thanks in part to well proven DT Swiss star ratchet rear hub internals. Tubeless compatibility would be the icing on the cake but in fairness, it's still a rarity in the road world.

We have plenty of praise for the rest of Bontrager finishing kit too. The Race X Lite IsoZone carbon handlebar does a fantastic job of sucking of road buzz and the matching carbon stem is impressively solid. Despite the minimal padding, the Paradigm XXX Carbon saddle is nevertheless comfortable and supportive for long days on the road too, thanks to its smart shape and generous central cutout.

Price: £10,311 BikeRadar says: "Overall, the latest Madone faithfully carries forward the range's hallmarks of brilliant handling, spot-on rider positioning, very good stiffness and good ride quality. Aero shaping and continuing weight losses only further improve the stock. However, the unusual rear brake position and the associated inconveniences mar what is otherwise a great bike." BikeRadar verdict: 3 1/2 stars More information: www.trekbikes.com

Complete bike specifications

Frame: Trek Madone 7-Series Project One (52cm tested) Fork: Trek Madone KVF full carbon Headset: Cane Creek IS8, 1 1/8-to-1 1/2in tapered Stem: Bontrager Race XXX Lite Handlebars: Bontrager Race X Lite IsoZone Tape/grips: Bontrager Gel Grip Front brake: Shimano Dura-Ace BR-9000 w/ Bontrager carbon-specific cork pads Rear brake: Shimano Dura-Ace BR-9000 w/ Bontrager carbon-specific cork pads Brake levers: Shimano Dura-Ace STI Dual Control ST-9000 Front derailleur: Shimano Dura-Ace FD-9000 Rear derailleur: Shimano Dura-Ace RD-9000 Shift levers: Shimano Dura-Ace STI Dual Control ST-9000 Cassette: Shimano Dura-Ace CS-9000 Chain: Shimano Dura-Ace CN-9000 Crankset: Shimano Dura-Ace FC-9000 Bottom bracket: Trek BB90 integrated Pedals: n/a Wheelset: Bontrager Aeolus 53 D3 clincher Front tyre: Bontrager R4, 700x25c Rear tyre: Bontrager R4, 700x25c Saddle: Bontrager Paradigm RXXXL Seatpost: Bontrager Ride Tuned Carbon seatmast Weight: 6.32kg (13.93 lbs) w/o pedals

Thank you for reading 5 articles in the past 30 days*

Join now for unlimited access

Enjoy your first month for just £1 / $1 / €1

*Read any 5 articles for free in each 30-day period, this automatically resets

After your trial you will be billed £4.99 $7.99 €5.99 per month, cancel anytime. Or sign up for one year for just £49 $79 €59

Try your first month for just £1 / $1 / €1

New Bianchi Infinito endurance bike gets internal cable routing, purple colour option

New woes for Peloton as CEO resigns, workforce cut by 400

'His training is producing really good numbers' – Roglič recovered from Itzulia injuries, builds toward Tour de France

Most Popular

• MAGAZINE OFFERS
• BIKE INSURANCE
• Best Products
• Maintenance
• Accessories
• Long-Term Reviews
• BikeRadar Podcast
• First Look Friday
• Bike of the Week
• Tech Features
• Routes and Rides
• Bike Galleries
• BikeRadar Bargains
• Buyer's Guides
• Fitness & Training
• Sizing & Fit
• Mountain Biking UK
• Cycling Plus

Trek Madone 7-Series Project One - long-term review

Latest Madone flagship walks a fine line between aerodynamics, stiffness and comfort

James Huang/Future Publishing

James Huang

We shared our first impressions of Trek's revamped 2014 Madone 7-Series Project One road racing flagship back in July and were generally quite happy with the experience. As always, the handling manners were impeccable, it was fairly comfortable and suitably quick under power – all while supposedly offering greatly improved aerodynamic performance over a round-tubed bike.

Several months later, our initial opinions haven't changed - if anything, they've only been reinforced. The latest Madone is Trek 's best in many ways but the controversial rear brake placement hasn't won us over.

• Highs: Fantastic geometry, spot-on rider positioning, good ride quality, admirably efficient
• Lows: Awkward rear brake position, rear wheel pad rub, out-of-spec fork tip

Ride and handling: telepathic handling, unflappably predictable

Our Madone reviews are starting to sound like broken records when it comes to describing the handling but given that it's so perennially exceptional, that's hardly a bad thing. When it comes to neutral handing, this really is the quintessential sweet spot between stability and agility. Calm high-speed manners inspire supreme confidence when bombing descents and yet the Madone is still amply quick to turn in when the corners start coming fast and furious. Simply lean it over, set an edge and rail through – often with no need to hit the brakes either.

Fit and rider positioning is still spot-on as well. We went with the more aggressive H1 geometry here with its lower front end and longer top tube, and found it just right when going hard. We've sampled the slightly more relaxed H2 version too, and found it provided a noticeably more upright ride but without compromising the superb handling.

The H1 geometry has lower front end and longer top tube than the more relaxed G2 geometry

As claimed, ride quality has improved over last year's version. It's a subtle change that many might not even notice, however, and we still wouldn't characterize the latest Madone's feel as pillowy smooth. It's exceptionally well damped and glides across good road surfaces without feeling overly isolating but neither end gives much on bumps of any size.

That being said, it rides quite well for a top-end machine whose primary intent is racing, particularly compared to other aero road machines that can sometimes be downright harsh. At least on the generally good roads we used during testing, the Madone is an easy machine to ride all day.

Overall stiffness is what we've come to expect from the Madone. Excellent front triangle rigidity lends extra precision and confidence to the handling traits, plus it makes for a solid feel when muscling the bars during out-of-the-saddle sprints and climbs. Rear end stiffness can't quite keep up with the front end but it's very good nonetheless and contributes to a generally sprightly and eager feel overall.

The custom spec included Bontrager Aeolus 3 D3 carbon clincher wheels

And have we mentioned yet that the new Madone is also light? Our complete test sample came with a custom Project One spec that includes a Shimano Dura-Ace 9000 mechanical group, Bontrager Aeolus 3 D3 carbon clinchers, and carbon fiber Bontrager finishing kit. The total weight for a 52cm size without pedals is a wispy 6.32kg (13.93lb). Actual weight of our 52cm frame is similarly svelte at 840g (with rear derailleur hanger and bolt-on housing stops) and the matching fork adds just 340g (195mm steerer, no plug).

Trek even claims some impressive aerodynamic savings over the previous round-tubed Madone: 25 watts at 40km/h, or about two minutes per hour.

So the latest Madone is stout under power, handles supremely well, reasonably comfortable, very light, more aerodynamic than before and puts its rider in a perfect position. What's not to like?

Unfortunately, it's that pesky rear brake.

Trek believes putting the rear brake caliper under the chain stays has multiple benefits. We're not convinced

Trek says the relocation of the rear caliper beneath the chain stays provides several benefits. For one, the chain stays are far bigger and stiffer than the seat stays so in theory, they should make for a more solid foundation and increased braking power. Moving the brake down below also frees up designers to slim down the seat stays for improved ride comfort, plus it cleans up the shape for supposedly reduced aerodynamic drag.

Despite the bridgeless seat stay design and their relatively slim profile, the Madone isn't appreciably more comfortable than other top competitors. The down-below location is also prone to road spray and debris kicked off of the front wheel, plus it's a very awkward location for maintenance. And while we didn't notice any unusual brake rub during our first few rides during the summer, we ultimately got several different wheelsets (including the stock Bontrager ones) to consistently contact the pads under hard efforts, even with relatively generous pad rim clearances.

The revamped brake location may very well over some measurable benefits but even so, we remain unconvinced that they outweigh the real-world drawbacks.

Putting the brake calipers here leaves them open to road spray and debris

Frame: lightweight with proven OCLV construction

The Madone may not fit the mold of what many expect to see in a supposedly aerodynamic road bike but that's due to its Kamm tail design. Instead of complete airfoil sections, the Madone instead uses clipped profiles that are said to offer similar aerodynamic benefits while still maintaining more traditional aspect ratios for good stiffness and ride qualities – both of which the Madone has in good quantities.

As is the trend with most modern carbon road frames these days, there are no abrupt profile changes, overly sharp edges or wacky shapes built into the design. Instead, Trek has maintained a more engineering-centric philosophy with gentle transitions throughout. Also present are the company's long-standing Madone frame features, such as the extra-wide BB90 bottom bracket shell with drop-in bearings, correspondingly wide down tube and chain stay spacing, a tapered 1 1/8 to 1 1/2in head tube (again, with bearing seats molded directly into the structure to save weight), and an integrated no-cut seatmast topped by a Bontrager molded carbon fiber head.

Other niceties include a built-in chain catcher, the Duotrap integrated optional wireless speed and cadence sensor, carbon fork tips and rear dropouts, and internal cable routing that's convertible for mechanical or electronic drivetrains. None of the internal paths are fully guided but even so, we found servicing to be a pretty straightforward process as long as you're careful to first run a section of housing through before pulling out the old inner wires. More importantly, the paths are straight and direct so there's no penalty in friction as compared to an external setup.

The built-in chain catcher is a nice touch

We did encounter one unfortunate manufacturing related hiccup during our time with the Madone: a fork tip that was a touch too long, which kicked the front wheel off-axis if we pulled the axle completely in – not a lot, mind you, but enough that we noticed. We ended up having to ship our test bike back to Trek, where 0.5mm was ground off of one dropout to correct the misalignment. All was good afterward but this is not exactly what you want to see on a bike costing upward of US$10,000.

Equipment: flawless Shimano Dura-Ace 9000 group and fantastic Bontrager bits

Whatever gripes we can air on the rear brake position and fork tip alignment, we have nothing but positive things to say in regards to the new Shimano Dura-Ace 9000 group . It's utterly brilliant in every way that matters and corrects every mis-step of the previous 7900 package.

Shift quality is superb, with smooth and dependable changes under full power – especially up front, which is still best in class. Lever action is light, enviably precise, and silky smooth, plus Shimano has given back the ability to downshift three rear gears in a sweep. Lever ergonomics are also fantastic, with a smooth shape that falls naturally in your hands and a reach adjustment that's usable without detracting from the keen aesthetics.

The Shimano Dura-Ace 9000 group provides superbly smooth shifting

Despite the unusual rear caliper placement and uncommon direct mount fitment, brake performance is excellent with ample power, a solid-feeling lever, and good control – provided you take the time to resurface the stock carbon-specific Bontrager cork pads. The rear quick-release that's built into the head tube stop is a little awkward to use during a wheel change but thankfully, we never really had to since the Bontrager Aeolus 3 D3 rims are roughly the same width as the 25mm tires we used primarily during testing.

We had excellent luck overall with Bontrager's latest 35mm-deep carbon clinchers, which are admirably rigid, lightweight, reasonably stable in crosswinds, and seemingly durable thanks in part to well proven DT Swiss star ratchet rear hub internals. Tubeless compatibility would be the icing on the cake but in fairness, it's still a rarity in the road world.

We have plenty of praise for the rest of Bontrager finishing kit too. The Race X Lite IsoZone carbon handlebar does a fantastic job of sucking of road buzz and the matching carbon stem is impressively solid. Despite the minimal padding, the Paradigm XXX Carbon saddle is nevertheless comfortable and supportive for long days on the road too, thanks to its smart shape and generous central cutout.

BikeRadar says: "Overall, the latest Madone faithfully carries forward the range's hallmarks of brilliant handling, spot-on rider positioning, very good stiffness and good ride quality. Aero shaping and continuing weight losses only further improve the stock. However, the unusual rear brake position and the associated inconveniences mar what is otherwise a great bike."

Complete bike specifications

• Frame: Trek Madone 7-Series Project One
• Fork: Trek Madone KVF full carbon
• Headset: Cane Creek IS8, 1 1/8-to-1 1/2in tapered
• Stem: Bontrager Race XXX Lite
• Handlebars: Bontrager Race X Lite IsoZone
• Tape/grips: Bontrager Gel Grip
• Front brake: Shimano Dura-Ace BR-9000 w/ Bontrager carbon-specific cork pads
• Rear brake: Shimano Dura-Ace BR-9000 w/ Bontrager carbon-specific cork pads
• Brake levers: Shimano Dura-Ace STI Dual Control ST-9000
• Front derailleur: Shimano Dura-Ace FD-9000
• Rear derailleur: Shimano Dura-Ace RD-9000
• Shift levers: Shimano Dura-Ace STI Dual Control ST-9000
• Cassette: Shimano Dura-Ace CS-9000
• Chain: Shimano Dura-Ace CN-9000
• Crankset: Shimano Dura-Ace FC-9000
• Bottom bracket: Trek BB90 integrated
• Pedals: n/a
• Wheelset: Bontrager Aeolus 53 D3 clincher
• Front tire: Bontrager R4, 700x25c
• Rear tire: Bontrager R4, 700x25c
• Saddle: Bontrager Paradigm RXXXL
• Seatpost: Bontrager Ride Tuned Carbon seatmast

Share this article

• Terms & Conditions
• Subscribe to our magazines
• Manage preferences

• New comments
• Military Photos
• Russian Military
• Anti-Aircraft
• SA-21/S-400 Triumf

96L6E Radar, S-400

• Oct 18, 2010

Trains Moscow to Elektrostal: Times, Prices and Tickets

• Train Times
• Seasonality
• Accommodations

Moscow to Elektrostal by train

The journey from Moscow to Elektrostal by train is 32.44 mi and takes 2 hr 7 min. There are 71 connections per day, with the first departure at 12:15 AM and the last at 11:46 PM. It is possible to travel from Moscow to Elektrostal by train for as little as or as much as . The best price for this journey is .

Get from Moscow to Elektrostal with Virail

Virail's search tool will provide you with the options you need when you want to go from Moscow to Elektrostal. All you need to do is enter the dates of your planned journey, and let us take care of everything else. Our engine does the hard work, searching through thousands of routes offered by our trusted travel partners to show you options for traveling by train, bus, plane, or carpool. You can filter the results to suit your needs. There are a number of filtering options, including price, one-way or round trip, departure or arrival time, duration of journey, or number of connections. Soon you'll find the best choice for your journey. When you're ready, Virail will transfer you to the provider's website to complete the booking. No matter where you're going, get there with Virail.

How can I find the cheapest train tickets to get from Moscow to Elektrostal?

Prices will vary when you travel from Moscow to Elektrostal. On average, though, you'll pay about for a train ticket. You can find train tickets for prices as low as , but it may require some flexibility with your travel plans. If you're looking for a low price, you may need to prepare to spend more time in transit. You can also often find cheaper train tickets at particular times of day, or on certain days of the week. Of course, ticket prices often change during the year, too; expect to pay more in peak season. For the lowest prices, it's usually best to make your reservation in advance. Be careful, though, as many providers do not offer refunds or exchanges on their cheapest train tickets. Unfortunately, no price was found for your trip from Moscow to Elektrostal. Selecting a new departure or arrival city, without dramatically changing your itinerary could help you find price results. Prices will vary when you travel from Moscow to Elektrostal. On average, though, you'll pay about for a train ticket. If you're looking for a low price, you may need to prepare to spend more time in transit. You can also often find cheaper train tickets at particular times of day, or on certain days of the week. Of course, ticket prices often change during the year, too; expect to pay more in peak season. For the lowest prices, it's usually best to make your reservation in advance. Be careful, though, as many providers do not offer refunds or exchanges on their cheapest train tickets.

How long does it take to get from Moscow to Elektrostal by train?

The journey between Moscow and Elektrostal by train is approximately 32.44 mi. It will take you more or less 2 hr 7 min to complete this journey. This average figure does not take into account any delays that might arise on your route in exceptional circumstances. If you are planning to make a connection or operating on a tight schedule, give yourself plenty of time. The distance between Moscow and Elektrostal is around 32.44 mi. Depending on the exact route and provider you travel with, your journey time can vary. On average, this journey will take approximately 2 hr 7 min. However, the fastest routes between Moscow and Elektrostal take 1 hr 3 min. If a fast journey is a priority for you when traveling, look out for express services that may get you there faster. Some flexibility may be necessary when booking. Often, these services only leave at particular times of day - or even on certain days of the week. You may also find a faster journey by taking an indirect route and connecting in another station along the way.

How many journeys from Moscow to Elektrostal are there every day?

On average, there are 71 daily departures from Moscow to Elektrostal. However, there may be more or less on different days. Providers' timetables can change on certain days of the week or public holidays, and many also vary at particular times of year. Some providers change their schedules during the summer season, for example. At very busy times, there may be up to departures each day. The providers that travel along this route include , and each operates according to their own specific schedules. As a traveler, you may prefer a direct journey, or you may not mind making changes and connections. If you have heavy suitcases, a direct journey could be best; otherwise, you might be able to save money and enjoy more flexibility by making a change along the way. Every day, there are an average of 18 departures from Moscow which travel directly to Elektrostal. There are 53 journeys with one change or more. Unfortunately, no connection was found for your trip from Moscow to Elektrostal. Selecting a new departure or arrival city, without dramatically changing your itinerary could help you find connections.

Book in advance and save

If you're looking for the best deal for your trip from Moscow to Elektrostal, booking train tickets in advance is a great way to save money, but keep in mind that advance tickets are usually not available until 3 months before your travel date.

Stay flexible with your travel time and explore off-peak journeys

Planning your trips around off-peak travel times not only means that you'll be able to avoid the crowds, but can also end up saving you money. Being flexible with your schedule and considering alternative routes or times will significantly impact the amount of money you spend on getting from Moscow to Elektrostal.

Always check special offers

Checking on the latest deals can help save a lot of money, making it worth taking the time to browse and compare prices. So make sure you get the best deal on your ticket and take advantage of special fares for children, youth and seniors as well as discounts for groups.

Unlock the potential of slower trains or connecting trains

If you're planning a trip with some flexible time, why not opt for the scenic route? Taking slower trains or connecting trains that make more stops may save you money on your ticket – definitely worth considering if it fits in your schedule.

Best time to book cheap train tickets from Moscow to Elektrostal

The cheapest Moscow - Elektrostal train tickets can be found for as low as $35.01 if you’re lucky, or $54.00 on average. The most expensive ticket can cost as much as $77.49.

Find the best day to travel to Elektrostal by train

When travelling to Elektrostal by train, if you want to avoid crowds you can check how frequently our customers are travelling in the next 30-days using the graph below. On average, the peak hours to travel are between 6:30am and 9am in the morning, or between 4pm and 7pm in the evening. Please keep this in mind when travelling to your point of departure as you may need some extra time to arrive, particularly in big cities!

Moscow to Elektrostal CO2 Emissions by Train

Anything we can improve?

Frequently Asked Questions

Go local from moscow, trending routes, weekend getaways from moscow, international routes from moscow and nearby areas, other destinations from moscow, other popular routes.

• Phone: +90 (212) 875 19 08
• E-Mail: [email protected]

• Company Profile
• Company Policy
• Mission and Vision
• Certificates
• Aluminium Windows
• Aluminium Doors

Aluminium Sliding Elements

• Aluminium Curtain Walls
• Aluminium Skylight Elements
• Aluminium Frames for Safety and Security
• Aluminium Conservatories
• Metal Panel Sheet Claddings
• Aluminium Entrance Frames
• Glass Structures
• Complementary Items
• Lightweight Steel Structures
• Human Resources OPEN

Thermally Sliding Elements

Non-thermally sliding elements.