2016 dodge journey jump start

How to Jump Start a Dodge Journey: A Complete Guide to Reviving Your Car

There may come a time when your Dodge Journey experiences a dead battery and you need to jump start it. Knowing how to jump start your vehicle can save you time and money, and get you back on the road quickly. In this guide, we’ll walk you through the step-by-step process of jump-starting a Dodge Journey.

What You’ll Need:

• A set of jumper cables
• Another vehicle with a functioning battery
• Safety gloves and goggles (optional but recommended)

Step 1: Find a Good Samaritan

If your Dodge Journey’s battery has died, you’ll need another vehicle with a functioning battery to jump-start it. Ask a friend, family member, or a kind stranger nearby who is willing to help you out.

Step 2: Position the Vehicles

Park the vehicle with the functioning battery close to your Dodge Journey, allowing enough space between the hood of both vehicles to easily access the batteries. Both vehicles should be turned off, with their parking brakes engaged.

Step 3: Identify the Battery Terminals

Open the hood of both vehicles and locate the battery terminals. They should be labeled as positive (+) and negative (-). The positive terminal is usually red, while the negative terminal is often black.

Step 4: Connect the Jumper Cables

Now it’s time to connect the jumper cables:

Step 5: Start the Vehicles

Once the jumper cables are securely connected, start the vehicle with the functioning battery and let it run for a few minutes. This will allow the dead battery to gain some charge.

Step 6: Start the Dead Vehicle

Now, try starting your Dodge Journey. If the battery was the underlying issue, it should start up. If it doesn’t, double-check the connections and let the vehicles sit for a few more minutes before attempting again.

Step 7: Disconnect the Jumper Cables

Once your Dodge Journey is running, carefully disconnect the jumper cables in the reverse order of how they were connected:

• Disconnect the negative (-) cable from the engine block of your Dodge Journey.
• Disconnect the negative (-) cable from the good battery.
• Disconnect the positive (+) cable from the good battery.
• Disconnect the positive (+) cable from the dead battery (Dodge Journey).

Final Thoughts

Jump-starting a Dodge Journey is a simple process as long as you follow the proper steps and take necessary precautions. Remember to always wear safety gloves and goggles when working with batteries. If your Dodge Journey continues to experience battery issues, it’s recommended to have the battery and charging system checked by a qualified mechanic.

Hopefully, this guide has helped you become more confident in jump-starting your Dodge Journey in case of a dead battery. Stay safe on the road!

Frequently Asked Questions On How To Jump Start A Dodge Journey: A Complete Guide To Reviving Your Car

How do you jump start a dodge journey.

To jump start a Dodge Journey, you’ll need a set of jumper cables and another vehicle with a fully charged battery. Connect the positive terminals, negative terminals, then start the Dodge Journey’s engine.

Can I Use A Portable Jump Starter To Jump Start My Dodge Journey?

Yes, a portable jump starter is a great alternative to using another vehicle. Connect the jump starter to the Dodge Journey’s battery, then start the engine.

What Should I Do If My Dodge Journey Doesn’t Start After A Jump?

If your Dodge Journey doesn’t start after a jump, double-check the connections, let the battery charge for a few minutes, and try again. If it still doesn’t start, you may need to replace the battery.

How Often Should I Jump Start My Dodge Journey?

Ideally, you should only jump start your Dodge Journey when the battery is dead. However, if you frequently jump start it, it may be time to have the battery and electrical system checked by a professional.

Related posts:

• How to Reset Nissan Rogue Radio: Easy Guide for Reviving Your Sound System
• Can a Subaru Jump Start Another Car: The Complete Guide
• How to Easily Reset Dodge Journey Oil Change Light: Complete Guide
• How to Easily Program Key Fob for Push Start Dodge Journey: Step-by-Step Guide

Leave a Comment Cancel reply

Save my name, email, and website in this browser for the next time I comment.

How to Jump a Dodge Journey

If your Dodge Journey’s battery is out of juice, a jump start may be the only way to get it up and running. However, if you’ve got no experience of jump-starting a car battery, you may not know how to start. This process isn’t too tricky, but needs to be carried out with care and precision to avoid any mistakes or risks. This guide will cover exactly how to jump a Dodge Journey, step by step. We’ll also cover what to do when your Journey is up and running again.

How to Jump Start a Journey: Step 1 – Preparation

First, before popping the hood or hooking up the cables, there are a few preparatory steps to follow. Prep really matters when it comes to jump-starting a Dodge Journey (or any other car) as it reduces the risk of any accidents or unwanted side effects from the process.

First, you’ll need to make sure you’ve got a good quality set of jumper cables to use. You’ll also need a secondary vehicle (a “donor” vehicle) with a fully-functional battery. Alternatively, you can use a portable battery booster to jump your Journey if another vehicle isn’t available. Safety gloves and glasses are also recommended.

Make sure the parking brake is engaged and shift your car into “Park,” with the ignition on “Lock.” Additionally, switch off all electrical systems, like the heater, the radio, and any in-car entertainment screens or GPS devices.

You’ll also want to make sure that, if you’re using a secondary vehicle to jump your Journey, it’s parked close by. Ideally, the two vehicles should be parked facing one another, so you can easily pop the hoods on both and connect the cables without running out of room.

Step 2. Pop the Hood

Find the hood release lever, which is typically below and to the left of the steering wheel, and pull it. Then step out of the vehicle, release the safety catch, and lift the hood. Use the hood prop to hold the hood in place while you work. Do the same for the secondary vehicle.

Step 3. Locate the Terminals

Next, you’ll want to locate the car battery and the positive (+) and negative (-) terminals, where you’ll be connecting the jumper cables. Make sure to put on your safety glasses and gloves before this stage, if you have them.

The positive terminal is red and marked by a + sign. Find it and remove its cover. If you have any trouble with this, look for the little locking tab. Push on that, then pull the cover upward, and it should come away freely.

You’ll also need a negative ground. For this, you can use any unpainted metal surface around the engine. Find a spot that is easy to access and keep it in mind when attaching the negative cables in the next step.

This is also a good time to inspect the batteries in both vehicles. Look for any signs of damage, such as cracks, acid leaks, corrosion, or even swelling of the battery itself. If the battery looks damaged or is leaking, it’s best to avoid attempting a jump start and call a mechanic instead.

Step 4. Connect the Cables

This is the most important step, and arguably the trickiest, too. You’ll need to hook up the jumper cables to the two car batteries, and there’s a very precise order to follow. If you do anything out of order or connect to the wrong locations, you could endanger yourself or damage the vehicles.

To begin, take the red (positive) jumper cable and connect one of the clamps to the positive terminal on the Dodge Journey. After that, connect the other end to the positive terminal on your secondary vehicle.

Take the black (negative) cable and connect one clamp to the negative terminal on the secondary vehicle, or your portable booster. Continue by attaching the other end to your negative ground (an unpainted metal section) on the Journey.

Step 5. Turn On the Secondary Vehicle

Turn on the engine of the secondary vehicle. Let it run for a few minutes to transfer energy from the donor battery to the dead Dodge Journey battery. You can also rev the engine in the secondary vehicle to help speed up the process.

After a few minutes, try starting the Dodge Journey. If it starts, disconnect the cables in the following order:

• The negative ground from the Dodge Journey.
• The negative cable from the donor vehicle.
• The positive clamp on the donor vehicle.
• The positive clamp from the Dodge Journey.

If the Dodge Journey still won’t turn over, leave it for another few minutes and try again. It may just need some more time. If it still won’t start, even after several attempts, there may be an underlying issue with either the battery or the alternator, and you might have to call a mechanic to fix it.

Step 6. Drive the Dodge Journey

Once your Dodge Journey fires up, it’s important to drive it around for a little while. This helps to recharge the battery. Aim to drive for at least 10 minutes, if not longer. The longer you can keep your car running, the more the battery will charge. Also, try to avoid using any electrical systems during this time, like the radio, as this will put extra stress on the battery and use power unnecessarily.

You may now want to visit a dealership or local garage to get your Dodge Journey looked at. Expert technicians can diagnose unexplained battery issues. However, you might already be able to figure out what went wrong on your own. For example, if you left the headlights on for a while, that’s most likely why the battery drained and needed to be jumped.

Why do you need a jump-start?

There are multiple potential reasons why a car might need a jump-start, including a dying battery, issues with the charging system, or a faulty alternator. In many cases, it’s because the car hasn’t been driven in a long time, causing the battery to gradually lose charge.

Jump Your Journey in a Few Easy Steps

As you can see, jumping a Dodge Journey is pretty similar to jumping any other car. It’s a relatively simple process, once you know how, but it still requires caution. Make sure to wear the proper safety equipment, take your time, and follow the correct clamping order to avoid any problems along the way.

Related posts:

No related posts.

Leave a Comment Cancel reply

• Dodge Manuals
• 2016 JOURNEY
• User manual

Dodge 2016 JOURNEY User Manual

• Owner's manual (664 pages)
• page of 140 Go / 140

Table of Contents

Introduction/welcome.

• Welcome from Fca Us Llc

Controls at a Glance

• Driver Cockpit
• Electronic Vehicle Information Center (EVIC) Display
• Speedometer

Getting Started

• Remote Start
• Keyless Enter-N-Go - if Equipped
• Engine Start/Stop Button
• Vehicle Security Alarm
• Seat Belt Systems
• Supplemental Restraint System (Srs) - Air Bags
• Child Restraints
• Head Restraints
• Front Seats
• Heated Seats
• Heated Steering Wheel
• Tilt/Telescoping Steering Column

Operating Your Vehicle

• Engine Break-In Recommendations
• Turn Signal/Light Lever
• Headlight Switch
• Electronic Speed Control
• Climate Control
• Parkview Rear Back-Up Camera
• Power Sunroof
• Wind Buffeting

Electronics

• Your Vehicle's Sound System
• Identifying Your Radio
• Uconnect 4.3 & 4.3S at a Glance
• Uconnect 8.4 & 8.4N at a Glance
• Siriusxm SATELLITE RADIO
• Ipod/CD/Aux CONTROLS
• Garmin Navigation
• Siriusxm TRAVEL LINK
• PLAYING Ipod/Usb/Mp3 DEVICES
• Uconnect Phone
• UCONNECT Voice Command (8.4 & 8.4N ONLY)
• Video Entertainment System (Ves)
• Steering Wheel Audio Controls
• Electronic Vehicle Information Center (EVIC) Controls
• Programmable Features
• UNIVERSAL GARAGE DOOR OPENER (Homelink)
• Power Inverter
• Power Outlets
• Trailer Towing Weights (Maximum Trailer Weight Ratings)
• Recreational Towing (Behind Motorhome, Etc.)

What to Do in Emergencies

• Roadside Assistance
• Instrument Cluster Warning Lights
• Instrument Cluster Indicator Lights
• If Your Engine Overheats
• Jacking and Tire Changing
• Jump-Starting
• Shift Lever Override
• Towing a Disabled Vehicle
• Freeing a Stuck Vehicle
• Enhanced Accident Response System (Ears)
• Event Data Recorder (Edr)

Maintaining Your Vehicle

• Opening the Hood
• Engine Compartment - 2.4L
• Engine Compartment - 3.6L
• Fluid Capacities
• Fluids, Lubricants, and Genuine Parts
• Flexible Fuel (3.6L Engine Only) - if Equipped
• Maintenance Procedures
• Maintenance Schedule
• Tires - General Information
• Replacement Bulbs
• Consumer Assistance
• Fca Us Llc Customer Center
• Fca Canada Inc. Customer Center
• Assistance for the Hearing Impaired
• Publications Ordering
• Reporting Safety Defects in the United States
• Mopar® Accessories
• Authentic Accessories by Mopar
• Frequently Asked Questions

Advertisement

Quick Links

• Download this manual

Related Manuals for Dodge 2016 JOURNEY

Summary of Contents for Dodge 2016 JOURNEY

• Page 1 2016 J O U R N E Y USER GUIDE...
• Page 2 I M P O R T A N T T hi s U s e r G u i d e is in ten d e d to familiarize you with the im p ortant fe atures o f yo u r v eh ic l e. Th e D VD e nc lo s e d contai ns yo ur Owne r’s Man ual , N av i g a t i o n / U co n n ect Ma nuals , Warranty B ooklets, Tir e Warra nty and R o a ds i d e A ss i st a n ce (n e w v e hic le s purc has e d in the U.

Page 3: Table Of Contents

Page 4: introduction/welcome.

• Page 5 I N T R O D U C T I O N / W E L C O M E VEHICLES SOLD IN CANADA With respect to any vehicles sold in Canada, the name FCA US LLC shall be deemed to be deleted and the name FCA Canada Inc.

Page 6: Controls At A Glance

• Page 7 C O N T R O L S A T A G L A N C E 9. Switch Panel • Hazard Switch • Rear Defroster pg. 44 • Electronic Stability Control (ESC) OFF Indicator Light pg. 93 • Air Recirculation pg. 45 10.

Page 8: Instrument Cluster

Page 9: speedometer, page 10: getting started, page 11: remote start, page 12: keyless enter-n-go - if equipped.

• Page 13 G E T T I N G S T A R T E D To Lock The Vehicle: • Both front door handles have buttons located on the outside of the handle. With one of the vehicle’s Keyless Enter-N-Go Key Fobs located outside the vehicle and within 5 ft (1.5m) of the driver's or passenger front door handle, push the door handle button to lock all four doors and liftgate.

Page 14: Engine Start/Stop Button

• Page 15 G E T T I N G S T A R T E D Stopping • Place the shift lever in PARK. • Push the ENGINE START/STOP button once. The ignition switch will return to the OFF position. • If the shift lever is not in PARK, the ENGINE START/STOP button must be held for two seconds and vehicle speed must be above 5 MPH (8 km/h) before the engine will shut off.

Page 16: Vehicle Security Alarm

Page 17: supplemental restraint system (srs) - air bags.

• Page 18 G E T T I N G S T A R T E D Advanced Front Air Bags • This vehicle has Advanced Front Air Bags for both the driver and front passenger as a supplement to the seat belt restraint systems. The Advanced Front Air Bags will not deploy in every type of collision.
• Page 19 G E T T I N G S T A R T E D Supplemental Knee Air Bags This vehicle is equipped with a Supplemental Driver Knee Air Bag mounted in the instrument panel below the steering column. The Supplemental Driver Knee Air Bag provides enhanced protection during a frontal impact by working together with the seat belts, pretensioners, and Advanced Front Air Bags.
• Page 20 G E T T I N G S T A R T E D WARNING! • Side Air Bags need room to inflate. Do not lean against the door or window. Sit upright in the center of the seat. • Being too close to the Side Air Bags during deployment could cause you to be severely injured or killed.
• Page 21 G E T T I N G S T A R T E D Air Bag Warning Light • The air bags must be ready to inflate for your protection in a collision. The Occupant Restraint Controller (ORC) monitors the internal circuits and interconnecting wiring associated with air bag system electrical components.

Page 22: Child Restraints

• Page 23 G E T T I N G S T A R T E D Locating LATCH Anchorages The lower anchorages are round bars that are found at the rear of the seat cushion where it meets the seatback. They are just visible when you lean into the rear seat to install the child restraint.
• Page 24 G E T T I N G S T A R T E D Center Seat LATCH The center seating position in this vehicle has a single dedicated anchorage. Use an- chorages B and C to install a child seat in the center position.
• Page 25 G E T T I N G S T A R T E D Installing The Child Restraint Using The Vehicle Seat Belts The seat belts in the outboard passenger seating positions are equipped with a Switchable Automatic Locking Retractor (ALR). The center seating positions are equipped with a cinching latch plate.
• Page 26 G E T T I N G S T A R T E D To Install A Child Seat Using A Cinching Latch Plate: 1. Place the child seat in the center of the seating position. 2. Next, pull enough of the seat belt webbing from the retractor to pass it through the belt path of the child restraint.
• Page 27 G E T T I N G S T A R T E D Integrated Child Booster Seat — If Equipped The Integrated Child Booster Seat is located in each outboard second-row passenger seat. Refer to the Integrated Child Booster Seat information label located on the front lower panel of the opened Booster Seat for child height and weight specifications.

Page 28: Head Restraints

• Page 29 G E T T I N G S T A R T E D To raise the head restraint, pull upward on the head restraint. To lower the head restraint, push the adjustment button, located at the base of the head restraint, and push downward on the head restraint.
• Page 30 G E T T I N G S T A R T E D Head Restraints — Second Row Seats The second row seats are equipped with adjustable and removable head restraints. To raise the head restraint, pull upward on the head restraint. To lower the head restraint, push the adjustment button located on the base of the head restraint, and push downward on the head restraint.

Page 31: Front Seats

• Page 32 G E T T I N G S T A R T E D Manual Seat Adjustment Forward/Rearward • Lift up on the adjusting bar located at the front of the seat near the floor and release it when the seat is at the desired position.
• Page 33 G E T T I N G S T A R T E D Flip 'n Stow Front Passenger Seat Storage • The seat latch release-loop is located in the center of the seat cushion between the seat cushion and the seatback. Pull the loop upward to release the latch and then forward to open the seat to the detent position.

Page 34: Rear Seats

• Page 35 G E T T I N G S T A R T E D STADIUM Tip ’n Slide (EASY ENTRY/EXIT SEAT) — SEVEN PASSENGER MODELS To Move The Second-Row Passenger Seat Forward NOTE: Raise the 20% seatback/armrest before moving the 60% seat to allow for full seat travel. •...

Page 36: Heated Seats

Page 37: heated steering wheel, page 38: tilt/telescoping steering column, page 39: operating your vehicle, page 40: turn signal/wiper/washer/high beam lever, page 41: headlight switch, page 42: electronic speed control.

• Page 43 O P E R A T I N G Y O U R V E H I C L E To Decrease Speed When the Electronic Speed Control is set, you can decrease speed by pushing the SET - button. The drivers preferred units can be selected through the instrument panel settings if equipped.

Page 44: Climate Control

• Page 45 O P E R A T I N G Y O U R V E H I C L E Uconnect 8.4 Automatic Climate Controls Uconnect 8.4 Automatic Climate Controls 1 — A/C Button 8 — SYNC Button 2 — Air Recirculation Button 9 —...
• Page 46 O P E R A T I N G Y O U R V E H I C L E Climate Control Knobs Climate Control Knobs 1 — A/C Button 6 — Rotate Blower Control Knob 2 — Air Recirculation Button 7 —...

Page 47: Parkview Rear Back-Up Camera

Page 48: power sunroof, page 49: wind buffeting, page 50: electronics.

• Page 51 E L E C T R O N I C S 7. Uconnect Radio pg. 50 8. Tune/Scroll Knob/Browse/Enter Button 9. SD Card Slot (push in to insert/eject) pg. 68 10. CD Slot 11. Front Power Outlet pg. 84 12. Aux Jack (located inside center console) pg. 67 13.

Page 52: Identifying Your Radio

Page 53: uconnect 4.3 & 4.3s at a glance.

• Page 54 E L E C T R O N I C S Audio Settings • Push the SETTINGS button on the faceplate on the right side of the unit. • Then scroll down and press the “Audio” button on the touchscreen to get to the Audio menu.

Page 55: Uconnect 8.4 & 8.4N At A Glance

• Page 56 E L E C T R O N I C S Setting The Time • Model 8.4N synchronizes time automatically via GPS, so should not require any time adjustment. If you do need to set the time manually, follow the instructions below for Model 8.4.

Page 57: Radio

• Page 58 E L E C T R O N I C S Models 8.4 & 8.4N Uconnect 8.4 Radio 1 — Radio Station Presets 5 — Seek Down Button 2 — Toggle Presets 1–6 and 7–12 6 — Direct Tune To A Radio Station 3 —...

Page 59: Siriusxm Satellite Radio

• Page 60 E L E C T R O N I C S Selecting SiriusXM Satellite Channels Seek Up/Seek Down • Press the “Seek arrow” buttons on the touchscreen for less than two seconds to seek through channels in SAT mode. • Press and hold either “arrow” button on the touchscreen for more than two seconds to bypass channels without stopping.
• Page 61 E L E C T R O N I C S Browse • Lets you browse the SiriusXM Satellite Radio channel listing, Favorites, Genres, Game Zone, and Weather channels. Jump setting, and also provides the SiriusXM Satellite Radio channel list. Browse contains many sub-menus. Browse Sub-Menu Description Sub-Menu...

Page 62: Ipod/Cd/Aux Controls

• Page 63 E L E C T R O N I C S Models 8.4 & 8.4N Models 8.4 & 8.4N 1 — Music Source: Disc, iPod, SD Card, AUX Or Bluetooth 2 — Repeat Track 3 — Shuffle Music Tracks 4 — Music Track Information 5 —...

Page 64: Garmin Navigation

• Page 65 E L E C T R O N I C S Acquiring Satellites • The GPS Satellite strength bars indicate the strength of your satellite reception. • Acquiring satellite signals can take a few minutes. When at least one of the bars is green, your device has acquired satellite signals.
• Page 66 E L E C T R O N I C S Go Home • A Home location must be saved in the system. From the Main Navigation menu, press “Where To?” then press “Go Home.” Following Your Route Following Your Route 1 —...
• Page 67 E L E C T R O N I C S Adding A Via Point • To add a stop between your current location and your end destination, you must be navigating a route. • Press the “back arrow” multiple times to return to the Main Navigation menu. •...

Page 68: Siriusxm Travel Link

Page 69: playing ipod/usb/mp3 devices, page 70: uconnect phone.

• Page 71 E L E C T R O N I C S Pairing A Phone • To use the Uconnect Phone feature, you must first pair your Bluetooth phone with the Uconnect system. Start Pairing Procedure On The Radio • Models 4.3, 4.3S: Push the MORE button on the faceplate, then press the “Phone” button on the touchscreen.
• Page 72 E L E C T R O N I C S Start Pairing Procedure On Mobile Phone • Search for available devices on your Bluetooth enabled mobile phone. This is usually within Settings or Options under “Bluetooth.” See your mobile phone’s manual for details.
• Page 73 E L E C T R O N I C S Select The Mobile Phone's Priority Level • When the pairing process has successfully completed, the system will prompt you to choose whether or not this is your favorite phone. Selecting “Yes” will make this phone the highest priority.
• Page 74 E L E C T R O N I C S Phone Menu Screen — Models 8.4 & 8.4N 1 — Favorite Phonebook Entries 9 — SMS (text messaging) 2 — Phone Battery Level 10 — Direct Dial 3 — Current Phone 11 —...
• Page 75 E L E C T R O N I C S Transfer Ongoing Call Between Handset And Vehicle During an on-going call, press the “Transfer” button on the touchscreen to transfer an on-going call between handset and vehicle. Common Phone Commands (Examples) •...

Page 76: Uconnect Voice Command (8.4 & 8.4N Only)

• Page 77 E L E C T R O N I C S Changing The Volume • Start a dialogue by pressing the Voice Command button , then say a command (for example, “help”). • Use the radio ON/OFF VOLUME rotary knob to adjust the volume to a comfortable level while the Voice Command system is speaking.
• Page 78 E L E C T R O N I C S Common Navigation Voice Commands • To access the navigation voice commands, press the Uconnect Voice Command button while in any mode and say “Navigation.” • Once in the Navigation feature, you can simply Say What You See on the touchscreen to give a navigation voice command.

Page 79: Video Entertainment System (Ves)

Page 80: steering wheel audio controls, page 81: programmable features, page 82: universal garage door opener (homelink).

• Page 83 E L E C T R O N I C S NOTE: Erasing all channels should only be performed when programming HomeLink for the first time. Do not erase channels when programming additional buttons. If you have any problems, or require assistance, please call toll-free 1-800-355-3515 or, on the Internet at HomeLink.com for information or assistance.
• Page 84 E L E C T R O N I C S Programming A Non-Rolling Code NOTE: For programming Garage Door Openers manufactured before 1995. 1. Turn the ignition switch to the ON/RUN position. 2. Place the hand-held transmitter 1 to 3 inches (3 to 8 cm) away from the HomeLink button you wish to program while keeping the HomeLink indicator light in view.

Page 85: Power Inverter

Page 86: power outlets.

• Page 87 E L E C T R O N I C S NOTE: • Do not exceed the maximum power of 160 Watts (13 Amps) at 12 Volts. If the 160 Watt (13 Amp) power rating is exceeded, the fuse protecting the system will need to be replaced.

Page 88: Utility

• Page 89 U T I L I T Y Recreational Towing — Front-Wheel Drive (FWD) Models Recreational towing is allowed ONLY if the front wheels are OFF the ground. This may be accomplished using a tow dolly or vehicle trailer. If using a tow dolly, follow this procedure: 1.

Page 90: What To Do In Emergencies

• Page 91 W H A T T O D O I N E M E R G E N C I E S - Air Bag Warning Light This light will turn on for four to eight seconds as a bulb check when the ignition switch is first turned to the ON/RUN position.
• Page 92 W H A T T O D O I N E M E R G E N C I E S Please note that the TPMS is not a substitute for proper tire maintenance, and it is the driver’s responsibility to maintain correct tire pressure, even if under-inflation has not reached the level to trigger illumination of the TPMS low EVIC or DID display.
• Page 93 W H A T T O D O I N E M E R G E N C I E S WARNING! A hot engine cooling system is dangerous. You or others could be badly burned by steam or boiling coolant. –...
• Page 94 W H A T T O D O I N E M E R G E N C I E S The light also will turn on when the parking brake is applied with the ignition switch in the ON/RUN position. NOTE: This light shows only that the parking brake is applied.

Page 95: Instrument Cluster Indicator Lights

Page 96: if your engine overheats, page 97: jacking and tire changing.

• Page 98 W H A T T O D O I N E M E R G E N C I E S 5. Turn OFF the ignition. 6. Block both the front and rear of the wheel diagonally opposite of the jacking position. For example, if changing the right front tire, block the left rear wheel.
• Page 99 W H A T T O D O I N E M E R G E N C I E S 2. Fit the assembled jack-handle over the winch drive nut located in the jack storage area. Rotate the jack-handle assembly counterclockwise until the spare tire is on the ground with enough cable slack to allow you to pull the spare tire out from underneath the vehicle.
• Page 100 W H A T T O D O I N E M E R G E N C I E S Jacking Instructions 1. Remove the spare tire, jack, and jack- handle from stowage. 2. Loosen, but do not remove, the wheel nuts on the wheel with the flat tire.
• Page 101 W H A T T O D O I N E M E R G E N C I E S 3. Place the jack underneath the lift area that is closest to the flat tire. Turn the jack screw clockwise to firmly engage the jack saddle with the lift area of the sill flange.
• Page 102 W H A T T O D O I N E M E R G E N C I E S 6. Install the spare tire. NOTE: For vehicles so equipped, do not attempt to install a center cap or wheel cover on the compact spare.
• Page 103 W H A T T O D O I N E M E R G E N C I E S Road Tire Installation Vehicles Equipped With Wheel Covers 1. Mount the road tire on the axle. 2. To ease the installation process for steel wheels with wheel covers, install two lug nuts on the mounting studs which are on each side of the valve stem.
• Page 104 W H A T T O D O I N E M E R G E N C I E S Vehicles Without Wheel Covers 1. Mount the road tire on the axle. 2. Install the remaining lug nuts with the cone shaped end of the nut toward the wheel. Lightly tighten the lug nuts.
• Page 105 W H A T T O D O I N E M E R G E N C I E S WARNING! • Do not attempt to change a tire on the side of the vehicle close to moving traffic. Pull far enough off the road to avoid the danger of being hit when operating the jack or changing the wheel.

Page 106: Jump-Starting

• Page 107 W H A T T O D O I N E M E R G E N C I E S Once the engine is started, remove the jumper cables in the reverse sequence: 1. Disconnect the negative (-) end of the jumper cable from the remote negative (-) post of the vehicle with the discharged battery.

Page 108: Shift Lever Override

Page 109: towing a disabled vehicle, page 110: enhanced accident response system (ears), page 111: maintaining your vehicle, page 112: engine compartment - 2.4l.

• Page 113 M A I N T A I N I N G Y O U R V E H I C L E 6. Transmission Dipstick (4 speed only) 7. Brake Fluid Reservoir 8. Remote Jump Start Positive Terminal 9. Power Distribution Center (Fuses) 10.

Page 114: Engine Compartment - 3.6L

• Page 115 M A I N T A I N I N G Y O U R V E H I C L E 6. Air Cleaner Filter 7. Washer Fluid Reservoir 8. Engine Oil Dipstick 9. Engine Oil Fill 10. Engine Coolant Pressure Cap...

Page 116: Fluid Capacities

• Page 117 M A I N T A I N I N G Y O U R V E H I C L E CAUTION! • Mixing of engine coolant (antifreeze) other than specified Organic Additive Tech- nology (OAT) engine coolant (antifreeze), may result in engine damage and may decrease corrosion protection.

Page 118: Flexible Fuel (3.6L Engine Only) - If Equipped

• Page 119 M A I N T A I N I N G Y O U R V E H I C L E Severe Duty All Models Change Engine Oil at 4,000 miles (6,500 km) if the vehicle is operated in a dusty and off road environment or is operated predominately at idle or only very low engine RPM’s.
• Page 120 M A I N T A I N I N G Y O U R V E H I C L E...
• Page 121 M A I N T A I N I N G Y O U R V E H I C L E...
• Page 122 M A I N T A I N I N G Y O U R V E H I C L E...

Page 123: Fuses

• Page 124 M A I N T A I N I N G Y O U R V E H I C L E Cavity Cartridge Fuse Mini-Fuse Description F124 – 10 Amp Red Mirrors F125 – 10 Amp Red Steering Column Control Module F126 –...
• Page 125 M A I N T A I N I N G Y O U R V E H I C L E Cavity Cartridge Fuse Mini-Fuse Description F153 – 20 Amp Yellow Fuel Pump Brake/Electronic Stability Control F156 – 10 Amp Red Module Power Transfer Unit Module –...

Page 126: Tires - General Information

• Page 127 M A I N T A I N I N G Y O U R V E H I C L E SPARE TIRES — IF EQUIPPED NOTE: For vehicles equipped with Tire Service Kit instead of a spare tire, please refer to “Tire Service Kit”...
• Page 128 M A I N T A I N I N G Y O U R V E H I C L E Full Size Spare — If Equipped The full size spare is for temporary emergency use only. This tire may look like the originally equipped tire on the front or rear axle of your vehicle, but it is not.

Page 129: Replacement Bulbs

Page 130: consumer assistance, page 131: reporting safety defects in the united states, page 132: mopar® accessories, page 133: frequently asked questions, page 134: index.

• Page 135 I N D E X Disposal Of Used Coolant ..116 Malfunction Indicator Drain, Flush, And Refill ..116 (Check Engine) ...92 Inspection ... . .116 Oil .
• Page 136 I N D E X General Maintenance ..116 Lock/Unlock ..10, 11, 12 Glass Cleaning ... . .116 Passive Entry .
• Page 137 I N D E X Checking ....116 Rocking Vehicle When Stuck ..107 Disposal ....116 Filter .
• Page 138 I N D E X Tilt Steering Column...36 Underhood Fuses ...122 Tires ....124, 125 Universal Garage Door Opener Air Pressure .
• Page 139 , v i s i t www.mopar.com (U.S.), www.mopar.ca (Canada) or your local Dodge dealer.
• Page 140 D O W N L O A D A F R E E E L E C T R O N I C C O P Y O F T H E O W N E R ’ S M A N U A L A N D W A R R A N T Y B O O K L E T B Y V I S I T I N G : W W W .

Rename the bookmark

Delete bookmark, delete from my manuals, upload manual.

Home » Troubleshooting » Dodge Journey won’t start – causes and how to fix it

Dodge Journey won’t start – causes and how to fix it

Dodge Journey is a reliable road companion, but its a machine with hundreds of interconnected parts, and like any other machine it sometimes fail to deliver normal operation. In this article we go through most common causes of Journey breakdown and how you can fix the problem.

The most common causes that hinders normal starting operation of your Journey are dead 12v battery, corrosion on battery terminals, and dead key fob battery. However, bad alternator, clogged fuel filter, broken starter, blown fuse, empty gas tank, immobilizer error, or any fault in the electrical system can also cause your vehicle not to start.

1. Weak Battery

If your Journey’s engine won’t crank or cranks very slowly, then the most likely culprit is weak or dead 12v battery. Investigating more closely and doing a battery voltage test will clarify whether the starting problem is due to the battery. A test can be done to measure the voltage between the battery poles, check the acid level and assess the condition of the starter battery.

If a new car battery has been installed, the battery may not have yet reached its full capacity. There is nothing to worry about. A new battery only develops its full capacity over time.

Test 12v battery

The voltage of the battery on your Dodge Journey can be measured precisely with a multimeter. Before the test, the multimeter is set to the voltage range of the battery and connected to its plus and minus poles. Successful testing of the car battery, i.e. checking the voltage, usually results in values ​​of approx. 12 to 13 volts. Values ​​above 14 or below 11.5 volts require an expert assessment of the condition of the car battery. Because the battery may have a defect with these measured values ​​and must be replaced.

Jump start Dodge Journey

If dead battery is the reason for the breakdown of your Journey, you can easily jump start it using jumper cables and a healthy battery from another vehicle, or using a battery booster if available.

First connect red cable to the positive terminal of your Journey’s dead battery, then to the positive terminal of donor battery. Next connect black cable to the negative terminal of donor battery, then to the bare metal in the engine bay of your Journey. Start the donor vehicle and then your Journey. Remove the cables in reverse order.

2. Corrosion on battery

Corrosion on the contacts of your car battery leads to loss of contact and reduced current flow, which means that your engine can no longer start properly.

To know if your Journey’s starting problems are from dirty battery contacts, you need to investigate them. If you lift the rubber covers over the two battery terminals, you can check the terminals for corrosion. If you discover white deposits or silvery-green deposits, but no further cracks or damage, you do not have to replace the battery, just clean it.

Clean battery corrosion

To clean the battery on your Dodge Journey, you have to remove the pole cables first, which requires no special knowledge, just a little concentration, as the order is very important. First remove the black cable from the negative pole. If the pole clamp is very tight, you can open it with pliers. We advise against using metal pliers, but if you use them, you must make sure that you do not touch any other parts of the body. Next you can unplug the red positive pole cable. Once the battery has been removed from the circuit, you can start cleaning the corroded battery. After cleaning, reconnect the terminals.

3. Weak key fob battery

If your Journey has push start/stop button, then its possible that your vehicle may not start due to weak key fob battery. Don’t worry, you can still start your vehicle – the battery is only used to send the signal for locking/unlocking. If the key fob battery is empty, the door no longer locks or unlocks at the push of a button. The doors must then be opened manually. The immobilizer is controlled by a passive transponder. Passive means, among other things, that the transponder in the key does not need its own power source.

How to start Dodge Journey with dead key fob battery

If you have a model of Journey which only has a key fob with start/stop button and no place to insert a key, then try placing your key fob as close to the start/stop button as you can and then start the vehicle.

Tip: You can try starting your Journey with its second key. It will also rule out any other problem with the first key, for example, water damage.

4. Broken starter motor

A starter is a motor for starting the engine of your Journey. The average life of a starter motor is about 100,000 to 150,000 miles, and the life will be shortened if the engine is started more frequently. In any case, since the starter motor also has a limited life, it will break down after using the car for a long time, and if the starter motor breaks down, the engine will not start.

Symptom: When you turn the key to start the engine of your Journey, you will hear a clicking sound, which is the sound of a bad starter motor. And if the starter motor does not work with a healthy battery, suspect a malfunction of the starter.

If the starter fails, it usually needs to be replaced with a new one.

Temporary fix for starter

If the engine does not start due to the starter, the engine may start if you turn the key while hitting the starter motor with something like a stick or metal tool. This workaround is effective when the parts inside the starter are stuck together or the gears are slightly out of alignment.

However, it is possible that the starter is nearing the end of its life, so it is recommended that you have it inspected at a dealer or maintenance shop.

5. Defective alternator

An alternator is a generator that produces electricity. If your Journey’s alternator fails, it will not be able to produce electricity and the battery will not be able to charge. Therefore, even if you think that the cause of the engine not starting is a battery failure and replace the battery, the battery will soon run out and the engine will not start.

Alternators rarely break down. In particular, modern cars have improved performance, so it is said that they will last 200,000 to 300,000 miles. Still, it can break down depending on how you use it, and in the case of a used car, the alternator may be quite old. Don’t let your guard down.

If the alternator breaks down, it must be replaced with a new alternator.

6. Clogged fuel filter

The fuel filter of your Journey does not wear out like a mechanical part, but it gets clogged by dirt and airborne particles and clogs over time. The permeability of the filter drops, and so does the fuel pressure. To a certain extent this doesn’t matter, but if the fuel filter is too dirty, the engine will no longer perform at full capacity and in some instance may not start at all. Cleaning is not possible, you can only change the filter.

7. Fuel pump failure

If your Journey’s fuel pump fails, then the engine won’t start. The pump normally ensures that the necessary amount of fuel is passed from the tank to the injection system of the engine with sufficient pressure.

Before your fuel pump stops working, it usually becomes noticeable: if your car’s engine breaks down from time to time, the car is difficult to start, the engine jerks a little or the engine performance drops, you should have your pump checked.

Wear or contamination of the pump can be the reason for this. If the pump is leaking, a power contact is broken, a line or a pump lever is broken, the fuel pump is usually also noticeable before failure. You can have a defective fuel pump replaced in your workshop.

8. Blown fuse

In rare cases, a blown fuse could also be the culprit in the breakdown of your Journey. Check all fuses in the fuse box essential for starting the engine. But, be careful when lending a hand yourself to the fuse box! The box is under power and repairs or tests should always be done in a workshop.

9. Defective spark plugs

Without functioning spark plugs, the engine will not start. The spark plugs themselves are often not affected by a defect. Instead, plug connections on the ignition system come loose. If only one plug is actually loose, you can fix the problem yourself on site. If a spark plug has failed, it must be replaced in the workshop.

10. Rodent damage

Rodent damage can be another reason why your Dodge Journey won’t start. The animals crawl under the vehicle and bite through cables and wires. In principle, this can affect all vehicle systems such as the fuel supply, the oil supply or the power supply.

The rodent damage can usually be seen quickly by looking into the engine compartment. The damage caused by the rodent bite can be repaired in the workshop. Be prepared for relatively high costs here.

11. Engine failure

Although very rare, but it can also be the cause of the breakdown of your Journey. If a vehicle has an engine failure, then nothing works anymore. It is not uncommon for the driver of a vehicle to be responsible for such damage. Typical causes include tearing of the timing belt, incorrect fueling, insufficient oil, hydrolock, overheating of the engine, or continuous driving in an excessive speed range.

Only an experienced mechanic can diagnose engine failure in a workshop.

Use OBD2 scanner for diagnosis

Since Dodge Journey is equipped with on-board diagnostics (OBD), a fault diagnosis can provide initial indications of where the malfunction is located.

To begin troubleshooting, you must first connect the diagnostic tool to your Journey. The OBDII connector is usually located under the dashboard. With the wire connected, you should turn the ignition on. But be careful not to start the engine. Most diagnostic devices then ask for some information about the vehicle. It is important that you enter this 100% correctly, otherwise the result of the search may be falsified. In addition to the vehicle manufacturer and model, you usually also have to type in the engine and vehicle ID number. For exact troubleshooting, always check whether the information is correct.

There are many reasons why your Journey may not start. When looking for the trigger, you should always start with the most obvious cause, the empty battery.

In any case, it is advisable for laypersons to call a breakdown service or a workshop. In the event of a defect, the latter can directly initiate the repair.

4 thoughts on “ Dodge Journey won’t start – causes and how to fix it ”

My Dodge Journey will not start after driving a short time, and then stopping about 20 minutes, then try to start, press lock unlock wait 10 minutes, car will then start every time.

This is a problem I am having with my Dodge Journey as well. I haven’t had this SUV 3 years and I am still paying on it.

My 2017 Dodge Journey ran fine in the morning yesterday, was totally dead last night – no locks, no dash lights, no power button. Long story short – disconnected + positive cable under hood to reset computer. Put cables back on after 10 min wait – got feeble spark while attaching wires. Entered car, found 4-way flashers indicating on dash. Button was accidentally depressed after morning drive. Charged battery for 1 hour with battery charger. Started fine, but needed to be driven extensively to fully charge 69-month old battery. Buying new battery tomorrow.

My dodge journey 2014 is not starting. It was stripped for overheating but now after the reassemble it’s not starting, VIN initialising and press clutch to start engine are showing on the clock

• Lexus ES makes clicking noise and won’t start – causes and how to fix it
• Cadillac SRX shakes at highway speeds – causes and how to fix it
• Renault Scenic makes grinding noise when starting – common causes
• How to remote start Hyundai Elantra with key fob or mobile device
• Audi A6 key fob not working – causes and how to fix it
• Infiniti QX50 steering wheel controls not working – causes and how to fix it
• Is Chevy HHR key fob waterproof?
• VW Jetta windshield washer not working – causes and how to fix it
• Ram ProMaster door makes a squeaking noise when opening or closing
• Range Rover Velar low AC refrigerant symptoms, how to recharge
• Dodge Charger airbag light is on – causes and how to reset
• Jaguar XJ airbag light is on – causes and how to reset
• Fiat 124 Spider shakes at highway speeds – causes and how to fix it
• Nissan Maxima makes humming noise at high speeds – causes and how to fix it
• Volvo S60 steering wheel controls not working – causes and how to fix it
• Chevy Blazer heater not working – causes and diagnosis
• How to operate climate control on BMW 3-Series
• Maserati Quattroporte burning smell causes and how to fix it
• VW Jetta dirty cabin air filter symptoms, when to replace
• Buick Encore ABS light is on – causes and how to reset

How to Jumpstart a 2011 Dodge Journey Mainstreet 3.6L V6 FlexFuel

Dodge journey model years - 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019.

How to properly jump start a car with the correct cable order

Hans Angermeier is an ASE certified Maintenance and Light Repair Technician and has produced over 100,000 videos showing drivers how to fix things on their cars. He has broad expertise on basic repair procedures covering the majority of cars on the road. Over the past 10 years, Hans has been focused on building CarCareKiosk, which is visited by millions of drivers each month.

Power steering fluid is easy to check and many people (mechanics included) often forget about - learn how here

If your brake fluid is a little low, learn how to add some here. Ignoring a low level leads to big problems

If your transmission is running low on fluid, be sure to add some - find out how to do this here!

Small bulbs that burn out regularly - did you know you can replace these with LED lights?

• Lake Ford helped make these videos
• Download Dodge owners manuals

This video shows you how to use jumper cables to jump start a dead battery in your 2011 Dodge Journey. If you get into your Journey, turn the key, and your car doesn't start (you may hear nothing or a clicking sound from the engine bay), you have a dead battery and need a jump-start. Check to see if you left your headlights or an interior light on and turn the switch off. Assuming that you have a pair of jumper cables, a pair of safety glasses and a friend to give you a jumpstart, the video above will show you where to connect the cables (and in what order!) for your Journey.

So what's up with the safety glasses? There is a small possibility of a battery exploding during the charging process if you don't connect the cables properly (causing a spark) and there is a bunch of hydrogen gas around the battery (car batteries emit hydrogen gas when they discharge) - this is much more of an issue with cars that haven't been driven for a long time than if you drive your Journey regularly and simply forgot to turn your lights off.

• Advance Auto coupon for 20% off entire order: KIOSK20

jump start DODGE JOURNEY 2016 1.G Owners Manual

Page 311 of 664.

Page 430 of 664

Page 529 of 664

Page 548 of 664

Page 550 of 664

Page 551 of 664

Page 552 of 664

Page 561 of 664

Page 571 of 664

Page 645 of 664

• Load next 10 pages

DODGE Owners Manuals

• 2008 DODGE GRAND CARAVAN 5.G Owners Manual
• 2008 DODGE RAM 3500 DIESEL 3.G Owners Manual
• 2010 DODGE CHALLENGER SRT 3.G Owners Manual
• 2020 DODGE DURANGO Owners Manual
• 2001 DODGE TOWN AND COUNTRY Owners Manual
• 2008 DODGE RAM 3500 CHASSIS CAB 3.G Owners Manual
• 2009 DODGE GRAND CARAVAN 5.G Owners Manual
• 2007 DODGE RAM 1500 GAS 3.G Owners Manual
• 2011 DODGE DURANGO 3.G Owners Manual
• 2004 DODGE RAM 2500 DIESEL 3.G Owners Manual
• 2008 DODGE CHALLENGER Owners Manual
• 2019 DODGE CHARGER Owners Manual

View, print and download for free: jump start - DODGE JOURNEY 2016 1.G Owners Manual, 664 Pages. Search in DODGE JOURNEY 2016 1.G Owners Manual online. CarManualsOnline.info is the largest online database of car user manuals. DODGE JOURNEY 2016 1.G Owners Manual PDF Download. Charging System Warning Light Red TelltaleLight What It Means Charging System Warning Light This light shows the status of the electrical charging system. If th

All product names, logos, and brands are property of their respective owners.

Privacy Policy | About Us & Contact

How to Jump-Start a Car

• 11/23/2000 (updated 2/6/2024 )

A dead car battery can leave you stranded and be a real headache. But if you carry jumper cables or a battery jump box in your trunk and know how to use them properly, you can get back on the road in a few minutes.

We go more into detail below , but if you need a quick solution, here is how to jump-start a car. If you're using jumper cables, connect the red clamp to the positive (+) post on the dead battery. There's often a red plastic cover near it. Connect the red clamp on the other end of the cable to the positive post on the working battery. Next, connect the black clamp to the negative post (-) on the working battery. Finally, you'll want to attach the last black clamp to an unpainted metal surface under the hood of the car with the dead battery, then start up both cars with the donor car going first.

If you're using a jump-starter battery pack, make sure the cords are connected to the box, then connect the red clamp on the positive (+) post and the black clamp to the negative (-) post. Make sure the jumper box is turned on. Some will have a green confirmation light to indicate that the connection is good. Start the car and it should do the trick. If not, try again and if that fails, your battery is likely completely drained.

Once your engine is running — and if the battery is still good — the alternator will recharge the battery. If the car battery dies again or the jump start does nothing, we recommend either calling roadside assistance or taking it to an auto parts store to buy a replacement battery. Often, stores will install a car battery for free, but call ahead to make an appointment if possible.

Take precautions

Jump-starting a car is relatively easy, but you should do it with caution. Since the car battery is often located in the engine compartment, where flammable gases may be present, a spark could set off a fire. The goal is to hook up the weak battery to the live battery in the booster car without creating any sparks. Connecting the jumper cables in the right order will minimize the chance of sparking.

It's important to make sure the metal ends of the jumper cables do not touch each other or any metal surfaces on the car until they are connected to the correct battery terminals. This can be more difficult than it sounds. Most areas under the hood are metal. If two people are available to jump-start a car, one person can simply hold the ends of the jumper cables safely separated, while the other person moves between the cars and makes the proper connections. One person can safely jump-start a car, but it does require close attention. With this in mind, here is a step-by-step guide to jump-starting a car.

10 steps for how to jump-start a car

It is always a good idea to consult your owner's manual for the correct order to connect the jumper cables. There may be variation among different car makes. Below is the most universally accepted method for jump-starting cars:

• Choose a good pair of jumper cables or a portable jump starter Keep them in the trunk for easy access. The cables should be thick, with adequate insulation and clean metal clamps. In some cases, the cables themselves will come with a chart reminding you of the proper order in which to connect them. If you have a jumper box, make sure the battery is fully charged before storing it in your car.
• Open the hood of each car to locate each battery and its terminals In some cases, the battery may be hidden or in the trunk, with remote positive terminal (+) and negative terminal (-) posts provided for jump-starting instead. Some vehicles may have a remote negative connection even if you can access the battery. This is for the final connection that we'll learn about later. Those with a portable jump starter can skip to step four.
• Park the vehicle with the good battery close to the one with the dead battery Leave yourself just enough room to walk between them. As you are hooking up the jumper cables, make sure the metal ends of the cables don't dangle into the engine compartment, where they could get caught on moving parts such as a belt or a fan, or on the outside of the car, where they could scratch the paint. Turn off the ignition in both vehicles, set the parking brakes, and make sure that the vehicles are in either park or neutral, depending on whether they have automatic or manual transmissions. Turn off all accessories, such as the lights, climate control and radio. If the vehicles are parked in a safe area, turn off the hazard flashers too.
• Clamp one of the red positive (+) jumper cable ends to the dead battery's positive terminal Be sure the clamp "bites" onto the battery terminal to provide a strong electrical connection. If there is corrosion on the terminal, twist the jaws of the clamp until it cuts through the corrosion and into the metal. Before moving on to the other car to make connections, make sure the matching black cable clamp is not touching any metal surfaces. Now clamp the other end of the positive jumper cable to the positive terminal in the booster car. Again, confirm that a plus sign is next to the battery terminal. Those with a portable jump starter can skip to step seven.
• Connect the black negative cable end to the negative (-) battery terminal in the booster car Now that the negative cable is connected to the battery terminal, you can attach the other end to an unpainted metal surface on the engine of the car with the dead battery. If a labeled remote negative terminal is available, use it. Otherwise, find an unpainted bolt or bracket that is at least several inches away from the dead battery. This will provide a solid electrical grounding and further reduce the possibility of sparking.
• Confirm that the jumper cables are not near any moving engine parts and start the booster car Let it idle for several minutes to build up a sufficient charge to start the other car's dead battery. If the dead battery is new and was drained by the car lights being left on for an extended time, it will probably start quickly. If the battery is old or if the car sat parked for a long time (about a month or more), it may take longer for the battery to charge and start. It sometimes helps to rev the engine in the booster car a little to hurry the process along.
• Start the vehicle with the dead battery and let it idle for a few minutes Those with a jumper box should make sure the unit is turned on first and a confirmation light appears. If the vehicle won't start but it does crank quickly, then look for other problems, such as an empty gas tank.
• Carefully disconnect the jumper cables, reversing the connection order The first cable you remove (the negative terminal on the formerly dead battery) is the most critical. Make sure your helper holds the cable away from any metal or the other cable ends while you disconnect the others.
• Drive the jump-started car for at least 20 minutes so its alternator can recharge the battery Make sure you are somewhere safe and the car is in an easy-to-access location before shutting off the engine. The car might need to be jump-started again depending on the battery's condition or the health of the alternator.
• If the battery that you've jump-started is more than 3 years old, consider having it tested at an auto parts store If other problems in the car caused the dead battery, such as a bad alternator or starter, take the vehicle to a mechanic for an inspection.

What is the correct order to attach jumper cables? Check your owner's manual for the proper order of attaching jumper cables, but in general, the order should be: red to the plus terminal on the dead battery, red to the plus on the working battery, black to the negative terminal on the working battery, and black to an unpainted piece of metal under the hood of the dead car.

What is the "mnemonic" for jump-starting a car? The rhyming reminder, or "mnemonic," for jump-starting a car goes something like this:

"Red from the dead to red on the good. Black from the good, to under the hood."

This is an easy way to learn the order to get started, but it doesn't address the clamps to remove first. Here's our mnemonic for this step: "When the battery's not dead, remove black then red."

What should you always remember when jump-starting a car? Important things to remember when jumpstarting a car are to know the proper order of attaching the cables and make sure that the second black clamp is grounded to an unpainted piece of metal. You also want to avoid the clamps making contact with each other (or other parts of the engine) when connected to a live battery.

What do you take off first when jumping a car? The first item to remove when jumping a car is the black clamp, attached to the negative post, on the vehicle being jumped. Have someone hold that cable, or set it on the ground, making sure it does not touch the red cable or anything else under the hood. Do the same for the black clamp of the donor vehicle, then remove the red clamp from the positive post on the formerly dead car battery, ensuring the clamps do not make contact with each other.

See Edmunds pricing data

Has Your Car's Value Changed?

Used car values are constantly changing. Edmunds lets you track your vehicle's value over time so you can decide when to sell or trade in.

Ronald Montoya has worked in the automotive industry since 2008. He has written over a thousand car related articles and bought and sold over 100 vehicles over the course of his career. Ronald is a senior consumer advice editor and content strategy at Edmunds and has also contributed to the Associated Press. He has also been featured on ABC, NBC and NPR on a number of car shopping topics. He got his start in the auto industry by taking a part-time job at a car dealership, where he worked in the service and accounting department.

2024 Acura ZDX

Other research topics

What shoppers are searching for, popular new cars.

• New Acura MDX
• New Chevrolet Bolt EUV
• New Chevrolet Bolt EV
• New Chevrolet Trailblazer
• New Ford Bronco
• New Ford Maverick
• New Ford Mustang Mach-E
• New Honda Accord
• New Honda Civic
• New Honda CR-V
• New Honda HR-V
• New Honda Odyssey
• New Honda Passport
• New Honda Pilot
• New Hyundai Palisade
• New Hyundai Santa Cruz
• New Hyundai Santa Fe
• New Hyundai Tucson
• New Kia Sportage
• New Kia Sportage Hybrid
• New Kia Telluride
• New Lexus NX 350h
• New Lexus RX 350
• New Lexus RX 350h
• New Mazda CX-30
• New Mazda CX-5
• New Mazda CX-50
• New Nissan Rogue
• New Subaru Crosstrek
• New Subaru Forester
• New Subaru Outback
• New Tesla Model 3
• New Tesla Model Y
• New Toyota 4Runner
• New Toyota bZ4X
• New Toyota C-HR
• New Toyota Camry
• New Toyota Camry Hybrid
• New Toyota Corolla
• New Toyota Corolla Cross
• New Toyota Highlander
• New Toyota Highlander Hybrid
• New Toyota Prius
• New Toyota RAV4
• New Toyota RAV4 Hybrid
• New Toyota RAV4 Prime
• New Toyota Sienna
• New Toyota Tacoma
• New Toyota Tundra
• New Toyota Venza
• New Volkswagen Atlas
• New Volkswagen Taos
• New Volkswagen Tiguan

Popular Used Sedans

• Used BMW 5 Series
• Used Chevrolet Impala
• Used Chevrolet Malibu
• Used Chrysler 200
• Used Dodge Charger
• Used Ford Fusion
• Used Ford Taurus
• Used Honda Accord
• Used Honda Civic
• Used Hyundai Elantra
• Used Hyundai Sonata
• Used Tesla Model S
• Used Toyota Camry
• Used Toyota Corolla
• Used Volkswagen Jetta

Popular Used SUVs

• Used Acura MDX
• Used Acura RDX
• Used Ford Edge
• Used Ford Explorer
• Used Honda CR-V
• Used Honda Pilot
• Used Hyundai Santa Fe
• Used Jeep Compass
• Used Lincoln Navigator
• Used Mazda CX-5
• Used Nissan Rogue
• Used Subaru Crosstrek
• Used Subaru Forester
• Used Tesla Model X
• Used Volvo XC90

Popular Used Pickup Trucks

• Used Ford F-150
• Used Nissan Titan
• Used Toyota Tacoma

Popular Used Hatchbacks

• Used Chevrolet Cruze
• Used Ford Focus
• Used Mazda 3
• Used Mazda 6
• Used Subaru Impreza

Popular Used Minivans

• Used Honda Odyssey
• Used Toyota Sienna

Popular Used Coupes

• Used BMW 3 Series
• Used Dodge Challenger
• Used Nissan Altima

Popular Used Wagons

• Used Kia Soul

Join Edmunds

Receive pricing updates, shopping tips & more!

Dodge Journey Won’t Start – What Could Be Wrong?

• July 10, 2023
• Journey Maintenance/Troubleshooting

It can be tough to make it to your destination if your Dodge Journey doesn't start. But, unless you are savvy with vehicle mechanics, it can be frustrating to figure out what could be wrong on your own. That's why we have researched the Dodge Journey for you in this article to help pinpoint the culprit!

If your Dodge Journey doesn't start, it could be due to one or more of the following issues:

• Dead battery
• Faulty alternator
• Dead key fob
• Bad starter motor
• Faulty starter solenoid
• Bad starter relay
• Bad computer
• Worn spark plugs
• Bad fuel pump
• Clogged fuel filter
• Bad fuel injectors
• Faulty immobilizer

We get it; that is an intimidating list of possible reasons why your Journey isn't starting! However, to help troubleshoot the issue, it is essential to understand the functions of each part and how they play a part in starting your vehicle. In this article, we will take a detailed look at each car part and its purposes. In addition, we will discuss how much a new starter will cost and the warning signs of a failing alternator, so read on!

Dodge Journey Won't Start—What Could Be Wrong?

The Dodge Journey is no different from any vehicle makes and model that you will have issues with at some point. Vehicles are depreciated machines, which means parts will break and need to be replaced as they are used.

With that being said, what could be wrong with your Dodge Journey causing it not to start? Let's take the most common causes of this problem:

Dead Battery

A dead battery is a principal reason why a Dodge Journey won't start. The battery in the car provides the initial spark to get your car going, and if it dies, there will be no hope of getting your vehicle running again until you charge up the battery with jumper cables.

In addition, check to see if your battery terminals are corroded. If they are, then they will need to be cleaned and then reconnect the battery cables. While doing this, make sure the cables are secure on the terminals and not loose.

If you try charging and jumpstarting the battery but still can't get the Journey to start, then take the battery out and take it to an auto parts store. They will be able to test the battery and determine if you need to replace it.

Dead Key Fob

A faulty key fob will also keep your Journey from starting. If the essential fob battery dies, it cannot emit the signals to start the car. If the battery and alternator are fine, take out the key fob battery and replace it. The batteries for these key fobs aren't expensive and are an easy way to fix the problem!

Bad Starter Motor

A bad starter motor is another common reason why your Dodge Journey won't start. Again, this can be due to lack of maintenance, but the starter will wear out and stop working correctly or entirely fail over time.

Usually, bad starters will make a clicking or a grinding noise. However, if the three parts mentioned above are working correctly, it could be a starter motor issue.

Faulty Starter Solenoid

A starter solenoid is a small box that connects to the starter. It has two parts – one part attaches to the car's battery, and the other end attaches to the starter motor.

The job of a starter solenoid is to pass power from the battery to the starter motor when you turn your key in the ignition switch. When a starter solenoid fails, it will cause starting problems that generally include the car not starting when hot or even when cold.

Bad Starter Relay

A starter relay is part of the starting system. It receives a signal from the ignition switch to initiate power to the solenoid so that it can start your Journey. But, just like the starter solenoid, when it fails, it will not send power to the solenoid, and thus your Journey won't start.

Bad Computer

A computer is also known as the ECM (electronic control module) or PCM (powertrain control module). You can take these parts for granted, but they are essential to your vehicle. A computer helps run all the systems in your car, and without it, you won't be able to get very far.

The computer controls things like fuel injection, ignition timing, idle control, and more! If the problem is with the computer, your car will have many issues, including a bad idle or a lack of power.

Worn Spark Plugs

If your spark plugs are worn out, they cannot send the electric charge to the engine, and it won't start. To check if you need new spark plugs, disconnect them from their electrical connectors and clean them with a wire brush.

Visually inspect for any damage, such as cracks in the ceramic or carbon build-up on the electrodes. If you notice that the plugs are bad, then you will need to replace them.

A blown a fuse is another common cause for a car not starting. A blown a fuse will not let the power flow between the battery and fuel pump, so your Journey won't start without gas!

Bad Fuel Pump

Your fuel pump sends gasoline from the gas tank to the engine so that it can run. If your fuel pump is broken, you won't have any fuel going into the engine and, therefore, no start to test if it's a bad pump, press down on your gas pedal a few times to see if it starts up.

Clogged Fuel Filter

A fuel filter filters the gasoline before it reaches your engine to clean and safe for combustion. If you have a clogged fuel filter, then there won't be enough pressure in the system to start up the car.

Bad Fuel Injectors

Fuel injectors are small parts in your engine that spray gasoline into the engine to make it run. If one of these is clogged or broken, there won't be enough gas going through and, therefore, no start!

Faulty Immobilizer System

An immobilizer system is a computerized security device in your car that prevents it from starting without the proper key.

If the immobilizer system does not receive a valid code, then your Journey will not start. You can determine if this is an issue by checking if the doors open and close appropriately with both fob keys.

How do I Know if my Alternator is Bad on my Dodge Journey?

An alternator takes the energy stored in a battery and converts it into a form that the car can run. A car will not start if its alternator is not producing electricity. You can jumpstart the battery, but you will find that it won't be long before the battery dies again.

I tell sign that your alternator is going bad is if you charge the battery and start driving again only for components such as the air conditioner, radio, and other parts to turn off slowly. Suppose this starts to happen; pull over to the side of the road and get the vehicle towed to a mechanic shop.

A car's alternator usually runs quietly and only makes noise when it is going bad, so before you take your Dodge Journey to the shop, make sure you check the alternator first as this could be the problem.

How Do you Start a Dodge Journey with a Dead Key Fob?

If you know for a fact that your key fob battery is dead , then you may think you are out of luck. However, you may be able to start the Journey still if the battery is dead. First, try starting the Journey by pressing the push to start button with the key fob itself. Sometimes this will help the vehicle recognize the key fob and start the vehicle!

How Much Does a Dodge Journey Starter Cost?

The cost to replace a Dodge Journey starter can vary depending on the model year. In addition, different mechanics in different regions may charge a different hourly labor price. However, you can expect to pay on average $180 to $250 for a full starter replacement. It never hurts to get different price quotes from certified mechanics in your area, including a Dodge dealer themselves.

Can you Jumpstart Dodge Journey?

You can jumpstart a Journey with the help of another vehicle or with a charged jump box. First, you have to connect the red cable to the positive terminal and the black cable to the negative terminal. Then, start the car you are using for the jump or turn on the jump box.

Give the battery a few minutes to charge before trying to start the Dodge Journey. If the Journey seems like it is trying to start but struggling, then resecure the battery cables and give it another try.

Final Thoughts

Overall, if your Dodge Journey isn't starting, then start with the basics. Check your key fob battery and try jumpstarting the battery. These are inexpensive troubleshoot options and usually the most common reason why your vehicle won't start. If those don't work, you may have a more significant issue and need to see a mechanic for a diagnosis.

For more articles, check these out:

Is The Dodge Journey A Van Or SUV?

How Much Does A Dodge Journey Cost?

Here's What The Dodge Grand Caravan Interior Is Like

Related posts:

• Is the Dodge Journey a Van or SUV?
• How Much Weight Can A Dodge Journey Carry?
• Hyundai Veloster Won’t Start—What Could Be Wrong?
• How Much Does a Dodge Journey Cost?

Leave a Reply Cancel Reply

Your email address will not be published. Required fields are marked *

Name  *

Email  *

Add Comment  *

Post Comment

Dodge Journey Not Starting: Causes + How to Fix

If your Dodge Journey doesn’t start, you’ve found the right article.  Many different issues can cause the problem.  We cover all the likely ones in an order that makes sense when diagnosing the issue at home.

This article is written with the assumption that you are looking for a way to get your Dodge Journey started now, and is meant to provide you with practical advice to help aid in the diagnosis.

First, is your Journey cranking over at all (the engine spins when you turn the key?  Or is the starter not engaging (you may hear a clicking sound)?

Table of Contents

Engine Not Cranking

Engine cranking, no start.

Here are the most common reasons why the Dodge Journey won’t start when the engine is not cranking .

1.  Battery Cables

Start by taking a look at the battery posts.  If they are loose or corroded, it acts as a barrier that can keep the starter from getting the voltage it needs to crank the engine.

If there appears to be green or white on them or the terminals, cleaning them may be what your Journey needs to get back on the road.

Here’s a good article from Napa on properly cleaning a battery terminal.

2.  Low Battery Voltage

As your vehicle’s battery ages, its cranking amperage decreases, leaving it with a diminished capacity for starting the engine.  Your Journey needs 12+ volts to start its engine .  

You can take your battery to the local parts store or even Walmart and have it tested to see if it still holds a charge.  

Alternatively, you can test the battery yourself with a voltage meter.  If the battery is in the vehicle and it’s under 12 volts, it’s likely bad unless your vehicle has been sitting for a while or something is drawing current.

If the battery is dead, it either isn’t storing enough voltage or it isn’t charging enough.

A bad alternator can cause your battery to drain to the point it can’t turn your Journey over. Suspect the alternator if the battery light stays on after charging your vehicle’s battery or jumping it.

3.  Starter Motor

The next thing to look at when your Journey isn’t starting would be the starter itself.  When the starter isn’t functioning, it is impossible to start your vehicle. 

A bad starter can make a clicking noise, no noise, or it can grind.  

When a starter goes bad, they will usually not give you much warning at first. Try repeatedly turning the key. Sometimes you’ll get lucky and it’ll “catch”.  

Or, you can beat the starter with a hammer. It really can get that one last start out of it.

Here are the common issues that can cause your Journey to crank but not start.  Your vehicle’s engine needs air, fuel, and a spark to run.

It is highly likely that if the engine is cranking but not starting that it has thrown an OBDII code. Use an OBDII scanner to check and see if the engine has thrown any trouble codes.  

The codes will likely be related to the potential issues listed below.  When applicable, we’ve listed the common trouble code(s) associated with the cause.

1.  Low Fuel Pressure

If your Journey isn’t getting enough fuel, or any fuel at all, it may have a bad fuel filter or a bad fuel pump .  Without the proper amount of fuel entering the combustion chamber, the Journey will crank but not start.

2.  Ignition Issues

One of the most significant issues that will cause a vehicle to crank but not start are ignition issues.  When there is no spark, the engine will not start.  You’ll probably have a misfire-related code such as P0300 , P0301, etc…

Many things, including bad spark plugs, bad coil packs, bad plug wires, computer issues, and more, can cause ignition issues. It’s likely your Journey had a rough idle before

3.  Engine Timing

If the engine’s ability to fire the spark plug at the right time is called “timing”.  If the spark plugs are firing at the wrong time, or something has happened to cause the camshaft to no longer be in sync with the crankshaft, your Journey won’t start.

There will usually be OBDII codes associated with timing-related problems, but not always.  P0013 is a common camshaft position-related code.  The crankshaft sensor can go bad as well.  When these sensors go bad, it can be impossible for your Journey to start.

4. Security

Most modern vehicles come with smart keys that have electronic protection built in.  This makes it more challenging for thieves to steal them.  

There are occasions where this security system will cause the Journey not to start, such as the key fob not working.  You’ll see a security warning when trying to crank the engine, though. 

5. Metering

MAF or MAP sensors measure the air entering your Journey’s engine.  If one of them has gone bad, it can cause the air-fuel mixture to be off enough to cause the vehicle not to start.

6.  Other Issues

There are a lot of issues that can cause your Journey not to start.  That’s why it is so important to check everything.  Here’s a great diagnostic chart that can walk you through diagnosing why a vehicle won’t start. 

Conclusion:  Dodge Journey Not Starting

There are many reasons that your Journey may not start.  Simple tests such as checking the battery with a voltage meter or scanning it with an OBD II scanner can really narrow down your list of potential causes.