2016 dodge journey awd service light

What Does Service Awd Mean on a Dodge Journey : Unveiling the Power Within

If you own a Dodge Journey, you may have come across the term “Service AWD” at some point. But what does it actually mean and why is it important? In this blog post, we will delve into the meaning and significance of Service AWD on a Dodge Journey.

The Basics of AWD

Before we dive into the “Service AWD” message, let’s briefly touch upon what AWD stands for. AWD stands for All-Wheel Drive, which is a drivetrain configuration that aims to provide power to all four wheels of the vehicle simultaneously. Unlike traditional two-wheel drive systems, AWD offers enhanced traction and stability, making it ideal for various driving conditions such as snow, ice, and off-road terrains.

Now that we have a basic understanding of AWD, let’s move on to decoding the “Service AWD” message on your Dodge Journey.

What Does “Service AWD” Mean?

“Service AWD” is an indication that there is an issue or fault with the All-Wheel Drive system in your Dodge Journey. When this message appears on your vehicle’s dashboard, it means that the AWD system has detected a problem and requires attention from a qualified technician.

The issues that can trigger the “Service AWD” message can vary, ranging from minor concerns to more significant problems. Although it can be tempting to ignore the message or dismiss it as a temporary glitch, it is crucial to take immediate action and address the underlying issue.

Possible Causes for the “Service AWD” Message

There are several potential reasons why your Dodge Journey’s AWD system may be signaling a “Service AWD” message. Some of the common causes include:

Malfunctioning wheel speed sensors
Problems with the AWD control module
Issues with the differential or transfer case
Worn-out or damaged drivetrain components
Electrical or wiring problems

It is important to note that diagnosing the exact cause of the “Service AWD” message requires proper diagnostics equipment and expertise. Therefore, it is advisable to take your Dodge Journey to an authorized service center or dealership where trained technicians can accurately diagnose and resolve the issue.

Consequences of Ignoring the “Service AWD” Message

While it may be tempting to ignore the “Service AWD” message, it is not recommended. Ignoring this message can lead to further damage and negatively impact the performance and safety of your Dodge Journey.

Continuing to drive with a faulty AWD system can result in decreased traction, poor handling, and ultimately compromise the vehicle’s ability to navigate adverse road conditions. Additionally, ignoring the “Service AWD” message may lead to more expensive repairs down the line.

Frequently Asked Questions For What Does Service Awd Mean On A Dodge Journey : Unveiling The Power Within

What does service awd mean on a dodge journey.

Service AWD refers to the maintenance required on the all-wheel drive system of your Dodge Journey. It ensures optimal performance and reliability.

In summary, the “Service AWD” message on your Dodge Journey indicates an issue with the All-Wheel Drive system, which requires attention from a qualified technician. Ignoring this message can have adverse effects on your vehicle’s performance and safety.

If you encounter the “Service AWD” message, it is recommended to schedule an appointment with a certified service center or dealership as soon as possible. They have the necessary expertise and equipment to diagnose and resolve the issue, ensuring your Dodge Journey continues to perform optimally in all driving conditions.

Is a Dodge Journey All Wheel Drive? Unveiling the Ultimate AWD Potential
What Does Service Advancetrac Mean on a Ford F150 : Unlocking the Power Within
How to Turn off Awd Lock on Nissan Rogue : Ultimate Guide for Disengaging AWD Lock
What is Service Shifter Dodge Charger? Unleashing the Power Within!

Service All Wheel Drive System Message: Causes and Fixes

A ‘service all-wheel drive system’ message is a sign of an issue with the all-wheel drive system. The issue could have been set off by something as little as installing an incorrect tire size or a low battery. A worn or contaminated rear differential fluid is also something you should check. A bad control module and corroded terminals are also possible culprits.

All-Wheel Drive System and “Service AWD System” Warning

The AWD system transfers power between all four wheels to maintain vehicle traction. It uses a driveshaft to distribute the engine power between the front and rear wheels.

A ‘service all-wheel drive system’ warning indicates that the AWD system is disabled. And only the front wheels will be powering the vehicle.

The warning could stay on or flash intermittently. But it is usually accompanied by a beeping sound. And it is common but not limited to General Motors vehicles.

Causes and Possible Fixes of the ‘Service All Wheel Drive System’ Message

The AWD warning is often activated because of an issue with the rear differential system. But, the breakdown of other components could also set off the warning.

Low battery

You should start by inspecting the battery power whenever you notice the AWD warning. The AWD system relies on the battery charge to stay operational. And anytime the battery voltage drops below 9 volts, the AWD system disables the rear wheels. It also activates the “service all wheel drive system” warning to alert the driver.

And if a defective or low battery indeed triggered the warning, a system scan will reveal a C0550 error code. The system will record the diagnostic code either as a stored or pending DTC.

Solving this problem is quite straightforward. If the battery is bad, replacing it will solve the problem. But if it is still in good condition, you should inspect your electrical system for a parasitic draw.

Something as minute as the tire can also turn on the “service all wheel drive system” warning. Installing an incorrect tire size or not replacing all four tires simultaneously can prompt the message. Both instances confuse the traction control system, causing premature wear of the drivetrain.

The AWD system will trigger the “service all wheel drive system” message to alert the driver. Thus, the correct tire size must be installed at all times. And when replacing any tire, you must change all four, so you don’t confuse the traction control system.

Corroded connectors

A corroded rear differential harness or control module connector could activate the warning. The rear differential system has a control module in charge of the system’s operation. The rear differential harness connects to the control module connector.

Exposing the wiring harness or control module connector to water creates corrosion. The corrosion gradually eats away the connector pins causing the breakdown in connection.

The break in transmission triggers the AWD system warning. A good preventive measure is to slather some di-electric grease on the connectors. But if the corrosion has done the damage, you’ll have to replace the connectors.

Faulty control module

The bad control module is another culprit that can set off the “service all wheel drive system” light. Like the connectors, exposing the control module to liquid can short it.

Clean the control module immediately after it comes in contact with water. And slather some di-electric grease on it to prevent it from shorting out. Once the control module goes bad, the only solution is to replace the module.

Overheated clutch control assembly

An overheated rear differential clutch assembly can also trigger the warning. The clutch control assembly transfers torque to the rear axle. The clutch assembly has a sensor that monitors the temperature to ensure it is within the range of -40°C to +120°C.

The AWD system disables the rear wheels anytime the clutch assembly overheats. This triggers the “Service All Wheel Drive System” on the dashboard. The rear wheels will reactivate when the temperature is back within range. The warning will also go away after a couple of drive cycles.

Contaminated rear differential fluid

The rear differential is divided into the clutch assembly and the ring gear segment. A seal separates both segments and prevents their different fluids from mixing.

General Motors recommends replacing the fluids every 150,000 miles. The AWD warning may pop up when the fluids become dirty after an extended period of use.

You will also get a warning if the seal separating both segments fails. The seal’s failure allows the fluid from both segments to mix. This disrupts the proper functioning of the rear differential system.

Replacing the fluids at the recommended interval will help keep the system running. Moreover, servicing the fluid is much cheaper than replacing warped components. For the rear differential seal, you’ll have to replace it once it fails.

How to Tackle the ‘Service All-Wheel Drive System’ Warning

You should scan your vehicle for error codes to narrow down the source when you get the warning. A basic OBD scanner cannot pull up trouble codes for a ‘service all-wheel drive system’ warning.

You’ll need a scanner that can communicate with the AWD system. Once you detect the cause of the problem, you can proceed to solve it. But you should know that dealing with an AWD system issue can be complex, even for a regular DIYer. So. you may want to use the services of a mechanic to avoid causing more damage to the system.

Final thoughts

The vehicle switches to two-wheel drive the instant the AWD warning pops up on the dashboard. The warning is often set off because of an issue with the rear differential system. But other factors, such as using incorrect tire size or a low battery, can also trigger the warning.

Honda F-Can Malfunction: Causes and Fixes

6 Reasons Why Adaptive Cruise Control Unavailable

Dodge AWD Warning Light

The Dodge AWD warning light is a system that helps indicate when there is a problem with the all-wheel drive system. This system is essential because it helps to keep the car from getting stuck in snow or mud. When this light comes on, it is essential to take the car to a mechanic so they can check the system and make sure everything is working correctly. Sometimes, the light may come on due to a sensor needing replacement.

👀Look at this: Dodge Gas Cap Warning Light

What is the Dodge AWD Warning Light?

If you see the Dodge AWD warning light , it means that there is a problem with the all-wheel drive system. This could be something as simple as a loose connection or something more serious like a broken component. Either way, you should have the vehicle checked by a qualified mechanic as soon as possible to avoid further damage.

See also: Dodge Dakota Dashboard Warning Lights

What Does the Dodge AWD Warning Light Mean?

The Dodge AWD warning light indicates that the all-wheel drive system is not functioning correctly. This could be due to a number of factors, such as low fluid levels, a faulty sensor, or a problem with the transfer case or driveshaft. If the light comes on, it's essential to have the vehicle checked by a qualified technician as soon as possible to avoid further damage.

💥See also: Dodge Charger Dashboard Lights Meaning

How to Fix the Dodge AWD Warning Light?

If your Dodge AWD warning light is on, it means that there is a problem with the all-wheel drive system. Several things can cause the light to come on, and you'll need to diagnose the problem to know how to fix it.

One common reason for the light to come on is that there is low fluid in the all-wheel drive system. You can check the fluid level by looking at the dipstick under the hood. If it's low, add more fluid until it reaches the proper level.

See also: Dodge Dart Dashboard Warning Lights

Another possibility is that one of the sensors in the all-wheel drive system is faulty. The sensors tell the system when to engage and disengage the all-wheel drive, so if one isn't working correctly, it can cause the light to come on. You'll need to have a mechanic check and replace the sensor if necessary.

There are other potential causes of the Dodge AWD warning light coming on, but these are two of the most common. If you're not sure what's causing your light to come on, take your car to a mechanic so they can diagnose and fix the problem.

If you ever see the AWD warning light come on in your Dodge vehicle, don't panic. It's most likely just a sensor that needs to reset, and you can easily do this yourself. However, if the light doesn't go off after resetting the sensor, it's time to take your vehicle to a qualified mechanic for further diagnosis.

💥See also: Dodge Airbag Warning Light

FAQs About Dodge AWD Warning Light

What would cause the awd light to come on.

A few different things could cause the AWD light to come on. One possibility is that there is an issue with the AWD system itself. Another possibility is an issue with one of the sensors that tell the system when to engage. Finally, there is also possibly an electrical issue somewhere in the system.

Is it OK to drive with the AWD light on?

No, driving with the AWD light on is not OK. This indicates a problem with the AWD system and needs to be checked by a mechanic as soon as possible.

What does AWD Lock light mean?

If your car has an AWD Lock light on the dash, the All Wheel Drive system is locked and engaged. This is usually used when driving in low traction conditions, such as snow or mud.

Can I drive with the SH-AWD light on?

No, it would be best if you did not drive with the SH-AWD light on. This indicates a problem with the vehicle's all-wheel-drive system, which needs to be serviced.

Do Dodge Journeys have issues?

This car model has seen some issues with its engine and transmission, making it a risky purchase for those searching for their next vehicle. While there are some years with faults, finding an updated version of this reliable model that doesn't come with expensive repair bills could be worth considering as a potential option.

What's the best year to buy a Dodge Journey?

The 2015 to 2019 Dodge Journey models are considered the best years, while earlier models should be avoided due to repeated reports of interior accessory troubles and water leaks.

What is the problem with the 2014 Dodge Journey?

Chrysler (FCA US LLC) is initiating a recall of certain 2011-2015 Dodge Journey vehicles. An issue has been identified where the driver's frontal air bag may unexpectedly deploy if the air bag wiring harness gets chafed within the steering wheel and short circuits. If necessary, affected vehicle owners should contact their local dealers for further information and arrange an inspection and repair.

How long do Dodge Journeys last?

Maintaining a 2016 Dodge Journey can provide long-term use, with an expected lifespan of up to 200,000 miles. This is significantly less than the top-rated Toyota Highlander's average mileage capacity. Repair Pal's data indicates that annual maintenance costs for this midsize SUV are slightly above the industry standard at $500 per year.

Was this page helpful?

Code P1693 on Dodge Cummins: Turbo Charge Control Circuit Malfunction

Dodge dakota years to avoid, warning lights in dodge caravan, dodge charger years to avoid - 6 worst years, dodge avenger dashboard warning lights and symbols, leave a comment cancel reply.

Save my name, email, and website in this browser for the next time I comment.

Tips and Advice

Tractor Dashboard Symbols And Meanings

Suzuki sx4 years to avoid - 5 worst years, cummins isx years to avoid and why, car with key symbol on dashboard, electronic throttle control warning light on - why, how many lamborghinis are there in the world - 2023 data.

Dodge Manuals
2016 JOURNEY
Owner's manual

Dodge 2016 Journey Owner's Manual

User manual (140 pages)
page of 664 Go / 664

Troubleshooting
Introduction
Introduction 3
How to Use this Manual
Warnings and Cautions
Vehicle Identification Number
Vehicle Modifications/Alterations

Things to Know before Starting Your Vehicle

Keyless Push Button Ignition
Things to Know before Starting Your Vehicle 9
Ignition or Accessory on Message
General Information
Replacement Keys
Customer Key Programming
Rearming of the System
To Arm the System
To Disarm the System
Security System Manual Override
Illuminated Entry
To Unlock the Doors and Liftgate
To Lock the Doors and Liftgate
Using the Panic Alarm
Programming Additional Transmitters
Transmitter Battery Replacement
How to Use Remote Start
Remote Start Abort Message on Electronic Vehicle Information Center (EVIC) - if Equipped
To Enter Remote Start Mode
To Exit Remote Start Mode Without Driving the Vehicle
To Exit Remote Start Mode and Drive the Vehicle
Remote Start Comfort Systems - if Equipped
Manual Door Locks
Power Door Locks
Child-Protection Door Lock System - Rear Doors
Power Windows
Wind Buffeting
Important Safety Precautions
Seat Belt Systems
Supplemental Restraint System (SRS)
Child Restraints
Transporting Pets
Engine Break-In Recommendations
Transporting Passengers
Exhaust Gas
Safety Checks You Should Make Inside the Vehicle
Periodic Safety Checks You Should Make Outside the Vehicle

Understanding the Features of Your Vehicle

Inside Day/Night Mirror - if Equipped
Automatic Dimming Mirror - if Equipped
Outside Mirrors
Power Mirrors
Power Folding Mirrors - if Equipped
Manual Folding Mirrors - if Equipped
Heated Mirrors - if Equipped
Illuminated Vanity Mirrors - if Equipped
Uconnect 4.3
Phone Call Features
Uconnect Phone Features
Advanced Phone Connectivity
Uconnect Phone
Uconnect 8.4/8.4Nav
Things You Should Know about Your Uconnect Phone
Uconnect 8.4/8.4 Nav
Uconnect Voice Commands
Driver's Power Seat - if Equipped
Power Lumbar - if Equipped
Front Heated Seats - if Equipped
Manual Front Seat Adjustments
Recliner Adjustment
Driver's Seat Height Adjustment - if Equipped
Fold-Flat Front Passenger Seat - if Equipped
Head Restraints
Third Row Passenger Seats - Seven Passenger Models
60/40 Split Second-Row Passenger Seats
50/50 Split Third-Row Passenger Seats with Fold-Flat Feature - Seven Passenger Models
To Open and Close the Hood
Headlight Switch
Automatic Headlights - if Equipped
Headlights on with Wipers (Available with Automatic Headlights Only)
Headlight Time Delay
Daytime Running Lights (DRL) - if Equipped
Lights-On Reminder
Fog Lights - if Equipped
Multifunction Lever
Turn Signals
Lane Change Assist
High/Low Beam Switch
Flash-To-Pass
Interior Lights
Map/Reading Lights
Intermittent Wiper System
Windshield Wiper Operation
Windshield Washers
Mist Feature
Tilt/Telescoping Steering Column
Heated Steering Wheel - if Equipped
To Activate
To Set a Desired Speed
To Deactivate
To Resume Speed
To Vary the Speed Setting
To Accelerate for Passing
Parksense Sensors
Parksense Warning Display
Parksense Display
Enabling and Disabling Parksense
Service the Parksense Rear Park Assist System
Cleaning the Parksense System
Parksense System Usage Precautions
Parkview Rear Back up Camera - if Equipped
Courtesy/Reading Lights
Sunglasses Storage
Interior Observation Mirror
Power Sunroof Switch - if Equipped
Before You Begin Programming Homelink
Programming a Rolling Code
Programming a Non-Rolling Code
Canadian/Gate Operator Programming
Using Homelink
Troubleshooting Tips
Opening Sunroof - Express
Opening Sunroof - Manual Mode
Closing Sunroof - Express
Closing Sunroof - Manual Mode
Pinch Protect Feature
Venting Sunroof - Express
Sunshade Operation
Sunroof Maintenance
Ignition off Operation
Power Outlets
Power Inverter Operation
Glove Compartment
Floor Console Storage
Center Console Storage
Flip 'N Stow Front Passenger Seat Storage - if Equipped
Second-Row Map Pocket and Grocery Retainers - if Equipped
In-Floor Storage bin with Removable Liner
Rechargeable Flashlight - if Equipped
Cargo Management System
Rear Window Wiper/Washer
Rear Window Defroster
Roof Luggage Rack - if Equipped

Understanding Your Instrument Panel

Instrument Panel Features
Instrument Cluster
Red Telltale Indicator Lights
Yellow Telltale Indicator Lights
Green Telltale Indicator Lights
White Telltale Indicator Light
Blue Telltale Indicator Light
Electronic Vehicle Information Center (Evic)
Electronic Vehicle Information Center (EVIC) Displays
Oil Change Due
Fuel Economy
Vehicle Speed
Tire Pressure
Vehicle Info (Customer Information Features)
Turn Menu off
Buttons on the Faceplate
Buttons on the Touchscreen
Customer Programmable
Features - Uconnect 4.3 Settings
Customer Programmable Features - Uconnect System 8.4 Settings
Getting Started
Single Video Screen
Play Video Games
Listen to an Audio Source on Channel 2 While a Video Is Playing on Channel 1
Important Notes for Single Video Screen System
Play a DVD Using the Touchscreen Radio
VES Remote Control - if Equipped
Remote Control Storage
Locking the Remote Control
Replacing the Remote Control Batteries
VES Headphones Operation
Replacing the Headphone Batteries
Unwired Stereo Headphone Lifetime Limited Warranty
System Information
Ipod/Usb/Mp3 CONTROL
Right-Hand Switch Functions
Left-Hand Switch Functions for Radio Operation
Left-Hand Switch Functions for Media (I.e., CD) Operation
CD/DVD Disc Maintenance
Radio Operation and Mobile Devices
Climate Controls
Manual Three Zone Climate Controls with
Touchscreen - if Equipped
Rear Manual Temperature Control (MTC) - if Equipped
Automatic Three Zone Temperature Control (ATC) with Touchscreen - if Equipped
Rear Automatic Temperature Control (ATC) - if Equipped

Starting and Operating

Automatic Transmission
Keyless Enter-N-Go
Normal Starting
Extreme Cold Weather (below -22°F or −30°C)
If Engine Fails to Start
After Starting
Key Ignition Park Interlock
Brake/Transmission Shift Interlock System
Four-Speed or Six-Speed Automatic Transmission
Gear Ranges
Engine Block Heater - if Equipped
All Wheel Drive (Awd) - if Equipped
Acceleration
Flowing/Rising Water
Shallow Standing Water
Power Steering Fluid Check
Parking Brake
Brake System
Electronic Brake Force Distribution (EBD)
Brake System Warning Light
Anti-Lock Brake System (ABS)
Anti-Lock Brake Warning Light
Brake Assist System (BAS)
Hill Start Assist (HSA)
Traction Control System (TCS)
Electronic Stability Control (ESC)
Trailer Sway Control (TSC)
Electronic Roll Mitigation (ERM)
Tire Markings
Tire Identification Number (TIN)
Tire Terminology and Definitions
Tire Loading and Tire Pressure
Tire Inflation Pressures
Tire Pressures for High Speed Operation
Radial Ply Tires
Run Flat Tires - if Equipped
Spare Tires - if Equipped
Tire Spinning
Tread Wear Indicators
Life of Tire
Replacement Tires
Tire Chains (Traction Devices)
Tire Rotation Recommendations
Premium System
Reformulated Gasoline
Gasoline/Oxygenate Blends
E-85 Usage in Non-Flex Fuel Vehicles
MMT in Gasoline
Materials Added to Fuel
Fuel System Cautions
Carbon Monoxide Warnings
Flexible Fuel (3.6L Engine Only) - if Equipped
E-85 General Information
Ethanol Fuel (E-85)
Fuel Requirements
Selection of Engine Oil for Flexible Fuel Vehicles (E-85) and Gasoline Vehicles
Cruising Range
Replacement Parts
Maintenance
Fuel Filler Cap (Gas Cap)
Loose Fuel Filler Cap Message
Vehicle Certification Label
Gross Vehicle Weight Rating (GVWR)
Gross Axle Weight Rating (GAWR)
Overloading
Common Towing Definitions
Trailer Hitch Classification
Trailer Towing Weights (Maximum Trailer Weight Ratings)
Trailer and Tongue Weight
Towing Requirements
Towing Tips

Related Manuals for Dodge 2016 Journey

Automobile Dodge 2016 JOURNEY User Manual

Summary of Contents for Dodge 2016 Journey

Page 1 Journey 2 0 1 6 O W N E R ’ S M A N U A L...
Page 2 This manual illustrates and describes the operation of VEHICLES SOLD IN CANADA With respect to any Vehicles Sold in Canada, the name FCA features and equipment that are either standard or op- US LLC shall be deemed to be deleted and the name FCA tional on this vehicle.

Page 3: Introduction 3

Page 5: table of contents, page 6: introduction.

Page 7 INTRODUCTION 5...

Page 8: Vehicle Identification Number

Page 9: vehicle modifications/alterations.

Page 11 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE CONTENTS A WORD ABOUT YOUR KEYS ... . .12 VEHICLE SECURITY ALARM — IF EQUIPPED ......18 ▫...
Page 12 10 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE ▫ Using The Panic Alarm ....23 ▫ Remote Start Comfort Systems — If Equipped ......29 ▫...
Page 13 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 11 OCCUPANT RESTRAINT SYSTEMS ..46 SAFETY TIPS ......107 ▫...

Page 14: A Word About Your Keys

Page 15: key fob, page 16: ignition or accessory on message, page 17: general information, page 18: sentry key, page 19: replacement keys, page 20: customer key programming, page 21: to arm the system, page 22: security system manual override, page 23: illuminated entry, page 24: to unlock the doors and liftgate, page 25: to lock the doors and liftgate, page 26: programming additional transmitters.

Page 27 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 25 Emergency Key Removal Separating RKE Transmitter Case 2. Insert the tip of the emergency key or a #2 flat blade 3. Remove the battery by turning the back cover over screwdriver into the slot and gently pry the two halves (battery facing downward) and tapping it lightly on a of the RKE transmitter apart.

Page 28: General Information

Page 29: how to use remote start, page 30: to enter remote start mode, page 31: to exit remote start mode and drive the vehicle, page 32: door locks, page 33: power door locks.

Page 34 32 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE If you push the power door lock switch, with the ignition in the ON/RUN or ACC position and any front door is open, the power locks will not operate. This prevents you from accidentally locking the Key Fob in the vehicle.

Page 35: Child-Protection Door Lock System - Rear Doors

Page 36 34 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Child-Protection Door Lock Location Child-Protection Door Lock Function 3. Repeat steps 1 and 2 for the opposite rear door. NOTE: When the Child-Protection Door Lock system is engaged, the door can be opened only by using the outside door handle even though the inside door lock is in the unlocked position.
Page 37 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 35 To Disengage The Child-Protection Door Lock WARNING! System Avoid trapping anyone in a vehicle in a collision. 1. Open the rear door. Remember that the rear doors can only be opened 2. Insert the tip of the emergency key (or alike) into the from the outside when the Child-Protection locks are child lock control and rotate it to the UNLOCK engaged.

Page 38: Keyless Enter-N-Go

Page 39 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 37 To Unlock From The Driver’s Side: NOTE: If “Unlock All Doors 1st Press” is programmed all doors will unlock when you grab hold of the driver’s With a valid Passive Entry RKE transmitter within 5 ft front door handle.
Page 40 38 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Preventing Inadvertent Locking Of Passive Entry RKE To Enter The Liftgate: Transmitter In Vehicle: With a valid Passive Entry RKE transmitter within 3 ft To minimize the possibility of unintentionally locking a (1.0 m) of the liftgate, push the button underneath the left Passive Entry RKE transmitter inside your vehicle, the side of the accent bar, which is located on the liftgate...
Page 41 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 39 To Lock The Vehicle’s Doors: Do NOT grab the door handle, when pushing the door handle button. This could unlock the door(s). With one of the vehicle’s Passive Entry RKE transmitters within 5 ft (1.5 m) of the driver or passenger front door handle, push the door handle LOCK button to lock all four doors and liftgate.

Page 42: General Information

Page 43: windows.

Page 44 42 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Auto-Up Feature With Anti-Pinch Protection WARNING! (Continued) On some models, the driver and front passenger power particularly unattended children, can become en- window switches have an Auto-up feature. Pull the trapped by the windows while operating the power window switch up to the second detent, release, and the window switches.
Page 45 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 43 • Any impact due to rough road conditions may trigger 2. Push the window switch down firmly to the second the auto-reverse function unexpectedly during auto- detent to open the window completely and continue closure.

Page 46: Wind Buffeting

Page 47 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 45 NOTE: The liftgate cannot be unlocked or locked with the manual door lock plungers on the door trim panels or the door lock cylinder on the driver’s door. To open the unlocked liftgate, squeeze the handle and pull the liftgate toward you.

Page 48: Occupant Restraint Systems

Page 49 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 47 restraints or belt-positioning booster seats. Older chil- side air bags will inflate forcefully into the space dren who do not use child restraints or belt- between occupants and the door and occupants could positioning booster seats should ride properly buckled be injured.

Page 50: Seat Belt Systems

Page 51 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 49 and the driver or outboard front seat passenger is un- The outboard front passenger seat BeltAlert is not active buckled (if equipped with outboard front passenger seat when the outboard front passenger seat is unoccupied. BeltAlert).
Page 52 50 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Lap/Shoulder Belts WARNING! (Continued) All seating positions in your vehicle are equipped with • In a collision, you and your passengers can suffer lap/shoulder belts. much greater injuries if you are not properly buck- led up.
Page 53 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 51 WARNING! (Continued) WARNING! (Continued) • Wearing your seat belt incorrectly could make your • A twisted seat belt may not protect you properly. In injuries in a collision much worse. You might a collision, it could even cut into you.
Page 54 52 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! (Continued) WARNING! (Continued) • A seat belt that is worn under your arm is danger- frays, or loose parts. Damaged parts must be re- ous. Your body could strike the inside surfaces of placed immediately.
Page 55 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 53 Pulling Out Lap/Shoulder Belt Inserting Latch Plate Into Buckle 3. When the seat belt is long enough to fit, insert the latch 4. Position the lap belt so that it is snug and lies low plate into the buckle until you hear a “click.”...
Page 56 54 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE position. If necessary, slide the latch plate down the webbing to allow the seat belt to retract fully. Lap/Shoulder Belt Untwisting Procedure Use the following procedure to untwist a twisted lap/ shoulder belt. 1.
Page 57 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 55 Adjustable Upper Shoulder Belt Anchorage In the driver and front passenger seats, the top of the shoulder belt can be adjusted upward or downward to position the seat belt away from your neck. Push or squeeze the anchorage button to release the anchorage, and move it up or down to the position that serves you best.
Page 58 56 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: The adjustable upper shoulder belt anchorage is WARNING! equipped with an Easy Up feature. This feature allows • ONLY use a Seat Belt Extender if it is physically the shoulder belt anchorage to be adjusted in the upward position without pushing or squeezing the release but- required in order to properly fit the original seat ton.
Page 59 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 57 Seat Belts And Pregnant Women Position the lap belt snug and low below the abdomen and across the strong bones of the hips. Place the shoulder belt across the chest and away from the neck. Never place the shoulder belt behind the back or under the arm.
Page 60 58 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE The pretensioners are triggered by the Occupant Re- Restraints Using The Vehicle Seat Belt” under the “Child straint Controller (ORC). Like the air bags, the preten- Restraints” section of this manual. The table below sioners are single use items.
Page 61 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 59 If the passenger seating position is equipped with an WARNING! ALR and is being used for normal usage, only pull the • Never place a rear-facing child restraint in front of seat belt webbing out far enough to comfortably wrap around the occupant’s mid-section so as to not activate an air bag.
Page 62 60 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE How To Disengage The Automatic Locking Mode WARNING! (Continued) Unbuckle the combination lap/shoulder belt and allow it only used to install rear-facing or forward-facing to retract completely to disengage the Automatic Locking child restraints that have a harness for restraining Mode and activate the vehicle sensitive (emergency) the child.
Page 63 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 61 the Active Head Restraints (AHR) to deploy. If a rear impact requires deployment, both the driver and front passenger seat AHRs will be deployed. When AHRs deploy during a rear impact, the front half of the head restraint extends forward to minimize the gap between the back of the occupant’s head and the AHR.
Page 64 62 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! WARNING! (Continued) as loose cargo could contact the Active Head Re- • All occupants, including the driver, should not straint during sudden stops. Failure to follow this operate a vehicle or sit in a vehicle’s seat until the warning could cause personal injury if the Active head restraints are placed in their proper positions Head Restraint is deployed.

Page 65: Supplemental Restraint System (Srs)

Page 66 64 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • Supplemental Side Air Bags • Supplemental Knee Air Bags • Front and Side Impact Sensors • Seat Belt Pretensioners • Seat Belt Buckle Switch • Seat Track Position Sensors Advanced Front Air Bags This vehicle has Advanced Front Air Bags for both the driver and front passenger as a supplement to the seat Advanced Front Air Bag And Knee Bolster Locations...
Page 67 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 65 output appropriate to the severity and type of collision as WARNING! determined by the Occupant Restraint Controller (ORC), • Being too close to the steering wheel or instrument which may receive information from the front impact sensors or other system components.
Page 68 66 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! WARNING! (Continued) some collisions, air bags won’t deploy at all. Al- • No objects should be placed over or near the air ways wear your seat belts even though you have air bag on the instrument panel or steering wheel, bags.
Page 69 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 67 Because air bag sensors measure vehicle deceleration Knee Impact Bolsters over time, vehicle speed and damage by themselves are The Knee Impact Bolsters help protect the knees of the not good indicators of whether or not an air bag should driver and front passenger, and position the front occu- have deployed.
Page 70 68 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE provides enhanced protection during a frontal impact by working together with the seat belts, pretensioners, and Advanced Front Air Bags. Supplemental Side Air Bags Your vehicle is equipped with two types of side air bags: 1.
Page 71 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 69 through the seat seam into the space between the occupant and the door. The SAB moves at a very high speed and with such a high force that it could injure occupants if they are not seated properly, or if items are positioned in the area where the SAB inflates.
Page 72 70 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE injury reduction potential provided by the seat belts and WARNING! body structure. • Your vehicle is equipped with left and right The SABICs deploy downward, covering the side win- Supplemental Side Air Bag Inflatable Curtains dows.
Page 73 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 71 The SABICs and SABs (“Side Air Bags”) are designed to help keep you in position, away from inflating Side Air activate in certain side impacts and certain rollover Bags. To get the best protection from the Side Air Bags, events.
Page 74 72 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE The Side Air Bags will not deploy in all side collisions, WARNING! (Continued) including some collisions at certain angles, or some side properly. In some collisions, Side Air Bags won’t collisions that do not impact the area of the passenger deploy at all.
Page 75 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 73 faster-developing event may deploy the seat belt preten- deploy and unfold. The abrasions are similar to fric- sioners as well as the Side Air Bags on both sides of the tion rope burns or those you might get sliding along a vehicle.
Page 76 74 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Do not drive your vehicle after the air bags have de- Enhanced Accident Response System ployed. If you are involved in another collision, the air In the event of an impact, if the communication network bags will not be in place to protect you.
Page 77 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 75 Enhanced Accident Response System Reset the OFF position or in the ACC position, the air bag Procedure system is not on and the air bags will not inflate. In order to reset the Enhanced Accident Response System The ORC contains a backup power supply system that functions after an event, the ignition switch must be may deploy the air bags even if the battery loses power or...
Page 78 76 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE While the air bag system is designed to be maintenance WARNING! free, if any of the following occurs, have an authorized dealer service the air bag system immediately. Ignoring the Air Bag Warning Light in your instrument panel could mean you won’t have the air bags to •...
Page 79 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 77 WARNING! (Continued) WARNING! (Continued) authorized dealer. Only manufacturer approved wiring, including adding any kind of badges or seat accessories may be used. If it is necessary to stickers to the steering wheel hub trim cover or the modify the air bag system for persons with dis- upper right side of the instrument panel.

Page 80: Child Restraints

Page 81 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 79 Before buying any restraint system, make sure that it has WARNING! a label certifying that it meets all applicable Safety Standards. You should also make sure that you can install In a collision, an unrestrained child can become a it in the vehicle where you will use it.
Page 82 80 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Summary Of Recommendations For Restraining Children In Vehicles Child Size, Height, Weight Or Age Recommended Type Of Child Restraint Infants and Children who are two years old or Either an Infant Carrier or a Convertible Toddlers younger and who have not reached the Child Restraint, facing rearward in the rear...
Page 83 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 81 Infants And Child Restraints carrier but are still less than at least two years old. Children should remain rear-facing until they reach the Safety experts recommend that children ride rear-facing highest weight or height allowed by their convertible in the vehicle until they are two years old or until they child seat.
Page 84 82 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Older Children And Child Restraints WARNING! Children who are two years old or who have outgrown Do not install a rear-facing car seat using a rear support their rear-facing convertible child seat can ride forward- leg in this vehicle.
Page 85 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 83 seat. The child and belt-positioning booster seat are held WARNING! (Continued) in the vehicle by the seat belt. • When your child restraint is not in use, secure it in the vehicle with the seat belt or LATCH anchor- WARNING! ages, or remove it from the vehicle.
Page 86 84 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE To position a child into the Integrated Child Booster Seat follow these steps: 1. Slide the second row seat to the full rear position to use the Integrated Child Booster Seat. NOTE: The second row bench with Integrated Child Booster Seat must remain in the full rear position during use.
Page 87 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 85 6. Slide the latch plate up the webbing as far as necessary to allow the seat belt to go around the child’s lap. NOTE: The lap portion of the seat belt should be low on the hips and as snug as possible.
Page 88 86 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! Securely lock the seat cushion into position before using the seat. Otherwise, the seat will not provide the proper stability for child seats and/or passengers. An improperly latched seat cushion could cause serious injury or death.
Page 89 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 87 2. Do the child’s knees bend comfortably over the front position. If the shoulder belt contacts the face or neck, of the vehicle seat – while they are still sitting all the move the child closer to the center of the vehicle, or use way back? a booster seat to position the seat belt on the child...
Page 90 88 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Recommendations For Attaching Child Restraints Restraint Type Combined Use any attachment method shown with an “X” Below Weight of the LATCH – Seat Belt Only LATCH – Seat Belt + Top Child + Child Lower Anchors Lower Anchors Tether Anchor...
Page 91 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 89 Lower Anchors And Tethers For CHildren seating position. These anchorages are used to install (LATCH) Restraint System LATCH-equipped child seats without using the vehicle’s seat belts. Some seating positions may have a top tether anchorage but no lower anchorages.
Page 92 90 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE LATCH Positions For Installing Child Restraints In This Vehicle Lower Anchor / Top Tether Locations (Third Row Shown – If Equipped) • Lower Anchorage Symbol 2 anchorages per seating position • Top Tether Anchorage Symbol...
Page 93 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 91 Child Restraint LATCH Positions Frequently Asked Questions About Installing Child Restraints With LATCH What is the weight limit (child’s weight + 65 lbs (29.5 kg) Use the LATCH anchorage system until the weight of the child restraint) for using the combined weight of the child and the child LATCH anchorage system to attach the child...
Page 94 92 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Frequently Asked Questions About Installing Child Restraints With LATCH Can the rear-facing child restraint touch the The child seat may touch the back of the back of the front passenger seat? front passenger seat if the child restraint manufacturer also allows contact.
Page 95 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 93 Locating LATCH Anchorages The lower anchorages are round bars that are found at the rear of the seat cushion where it meets the seatback. They are just visible when you lean into the rear seat to install the child restraint.
Page 96 94 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE tether strap. The tether strap will have a hook at the end to attach to the top tether anchorage and a way to tighten the strap after it is attached to the anchorage. Center Seat LATCH This vehicle has 5 lower LATCH anchorages in the rear seat.
Page 97 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 95 and buckle, the center seat belt can be used to restrain an occupant or child restraint in the center seating position. 2. Left outboard and center seating positions (3 and 2): Install the first child seat in the left outboard seating position using lower anchorages D and E.
Page 98 96 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Always follow the directions of the child restraint manu- WARNING! (Continued) facturer when installing your child restraint. Not all child child restraint using anchorages C and D. This is restraint systems will be installed as described here. not a LATCH-compatible position in your vehicle.
Page 99 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 97 forward and rearward in the vehicle, you may wish to 6. Test that the child restraint is installed tightly by move it to its rear-most position to make room for the pulling back and forth on the child seat at the belt child seat.
Page 100 98 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE the seat belt tight around the child restraint so that it is WARNING! not necessary to use a locking clip. The ALR retractor can • Improper installation of a child restraint to the be “switched”...
Page 101 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 99 Lap/Shoulder Belt Systems For Installing Child Restraints In This Vehicle Third Row Shown – If Equipped • ALR - Switchable Automatic Locking Retractor • CINCH = Cinching Latchplate...
Page 102 100 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Frequently Asked Questions About Installing Child Restraints With Seat Belts What is the weight limit (child’s weight + Weight limit of Always use the tether anchor when using weight of the child restraint) for using the the Child the seat belt to install a forward facing child Tether Anchor with the seat belt to attach a...
Page 103 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 101 Installing A Child Restraint With A Switchable 5. To lock the seat belt, pull down on the shoulder part of Automatic Locking Retractor (ALR) the belt until you have pulled all the seat belt webbing out of the retractor.
Page 104 102 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE strap. See the section “Installing Child Restraints rear-most position to make room for the child seat. Using the Top Tether Anchorage” for directions to You may also move the front seat forward to allow attach a tether anchor.
Page 105 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 103 strap. See the section “Installing Child Restraints If the belt still cannot be tightened after you shorten the Using the Top Tether Anchorage” for directions to buckle, disconnect the latch plate from the buckle, turn attach a tether anchor.
Page 106 104 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! (Continued) (LATCH) Restraint System” for the location of ap- proved tether anchorages in your vehicle. 1. Look behind the seating position where you plan to install the child restraint to find the tether anchorage. Seat Track Release Lever You may need to move the seat forward to provide 2.
Page 107 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 105 between the two posts. If not possible, lower the head 4. Remove slack in the tether strap according to the child restraint and pass the tether strap around the outboard restraint manufacturer’s instructions. side of the head restraint.

Page 108: Transporting Pets

Page 109: safety tips, page 110: exhaust gas, page 111: safety checks you should make inside the vehicle.

Page 112 110 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Floor Mat Safety Information WARNING! (Continued) Always use floor mats designed to fit the footwell of your • Never place or install floor mats or other floor vehicle. Use only floor mats that leave the pedal area coverings in the vehicle that cannot be properly unobstructed and that are firmly secured so that they secured to prevent them from moving and interfer-...

Page 113: Periodic Safety Checks You Should Make Outside The Vehicle

Page 115 UNDERSTANDING THE FEATURES OF YOUR VEHICLE CONTENTS ▫ Uconnect 4.3 ......124 MIRRORS ......119 ▫...
Page 116 114 UNDERSTANDING THE FEATURES OF YOUR VEHICLE ▫ Operation ......151 ▫ Front Heated Seats — If Equipped ..202 ▫...
Page 117 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 115 ▫ Flash-To-Pass ......229 LIGHTS ......224 ▫...
Page 118 116 UNDERSTANDING THE FEATURES OF YOUR VEHICLE ▫ Service The ParkSense Rear Park Assist ELECTRONIC SPEED CONTROL — IF EQUIPPED ......238 System .
Page 119 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 117 ▫ Programming A Non-Rolling Code ..259 ▫ Sunshade Operation....267 ▫...
Page 120 118 UNDERSTANDING THE FEATURES OF YOUR VEHICLE ▫ Flip ’n Stow Front Passenger Seat Storage — If ▫ Cargo Management System ....283 Equipped ......279 REAR WINDOW FEATURES .

Page 121: Mirrors

Page 122 120 UNDERSTANDING THE FEATURES OF YOUR VEHICLE left, and right for various drivers. The mirror should be adjusted to center on the view through the rear window. This mirror automatically adjusts for headlight glare from vehicles behind you. NOTE: • The Automatic Dimming Mirror feature is disabled when the vehicle is in reverse gear to improve rear view viewing.

Page 123: Outside Mirrors

Page 124: power folding mirrors - if equipped, page 125: manual folding mirrors - if equipped, page 126: uconnect phone (4.3).

Page 127 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 125 • View Call logs on screen (“Show incoming calls,” • Pairing up to 10 phones/audio devices for easy access “Show Outgoing calls,” “Show missed Calls,” “Show to connect to them quickly Recent Calls”) Your mobile phone’s audio is transmitted through your •...
Page 128 126 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Uconnect Phone allows you to transfer calls between the works no matter where you stow your mobile phone (be system and your mobile phone as you enter or exit your it your purse, pocket, or briefcase), as long as your phone vehicle and enables you to mute the system’s microphone is turned on and has been paired to the vehicle’s for private conversation.

Page 129: Operation

Page 130 128 UNDERSTANDING THE FEATURES OF YOUR VEHICLE say each part of the command when you are asked for The system handles multiple inputs in the same phrase it. For example, you can use the compound command or sentence such as “make a phone call” and “to Kelly form voice command “Search for John Smith,”...
Page 131 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 129 Help Command Pair (Link) Uconnect Phone To A Mobile Phone If you need assistance at any prompt, or if you want to To begin using your Uconnect Phone, you must pair your know your options at any prompt, say “Help” following compatible Bluetooth enabled mobile phone.
Page 132 130 UNDERSTANDING THE FEATURES OF YOUR VEHICLE b. Push the MORE button on the faceplate, then press this phone the highest priority. This phone will take the “Phone” button on the touchscreen and you precedence over other paired phones within range. will go to the Uconnect Phone main screen.
Page 133 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 131 this device the highest priority. This device will take 2. Press the “Phone/Bluetooth” button on the touch- precedence over other paired devices within range. screen. NOTE: If No is selected, device priority is determined by 3.
Page 134 132 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 5. Press the “X” to exit out of the Settings screen. 3. Select a different Phone or Audio Device then the currently connected device. Deleting A Phone Or Audio Device 4. At the Options pop-up screen press the “Make Favor- 1.
Page 135 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 133 • Automatic download and update of a phone book, if edited on the mobile phone. The changes are trans- supported, begins as soon as the Bluetooth wireless ferred and updated to Uconnect Phone on the next phone connection is made to the Uconnect Phone, for phone connection.

Page 136: Phone Call Features

Page 137 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 135 3. The Uconnect Phone will dial the number associated Touch-Tone Number Entry with John Doe, or if there are multiple numbers it will 1. Press the “Phone” button on the touchscreen. ask which number you want to call for John Doe. 2.
Page 138 136 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • Outgoing Calls Ignore. Press the Answer button on the touchscreen or push the Phone button on the steering wheel to • Missed Calls accept the call. • All Calls Answer Or Reject An Incoming Call — Call These can be accessed by touching the recent calls button Currently In Progress on the touchscreen on the Phone main screen.
Page 139 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 137 Making A Second Call While Current Call Is In hold at a time. Also you can press the “Swap” button Progress on the touchscreen, on the Phone main screen. To make a second call while you are currently on a call, Join Calls push the Voice Command button and say “Dial”...

Page 140: Uconnect Phone Features

Page 141 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 139 NOTE: Roadside Assistance/Towing Assistance • The emergency number dialed is based on the country If you need roadside/towing assistance: where the vehicle is purchased (911 for the U.S. and • Push the Phone button to begin.
Page 142 140 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Working With Automated Systems numbers, is also to be used for navigating through an automated customer service center menu structure, This method is used in instances where one generally has and to leave a number on a pager. to push numbers on the mobile phone keypad while navigating through an automated telephone system.
Page 143 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 141 • You may not hear all of the tones due to mobile phone Say the full name” you could push the Voice Com- network configurations. This is normal. mand button and say, “John Smith” to select that option without having to listen to the rest of the voice •...

Page 144: Advanced Phone Connectivity

Page 145: uconnect phone.

Page 146 144 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • You can say “O” (letter “O”) for “0” (zero). NOTE: • Even though the system is designed for users speaking • Even though international dialing for most number in North American English, French, and Spanish ac- combinations is supported, some shortcut dialing cents, the system may not always work for some.
Page 147 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 145 • Performance, such as audio clarity, echo, and loudness Power-Up to a large degree rely on the phone and network, and After switching the ignition key from OFF to either the not the Uconnect Phone ON or ACC position, or after a language change, you •...
Page 148 146 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Voice Tree...

Page 149: General Information

Page 150: uconnect phone (8.4/8.4n).

Page 151 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 149 • Setting Favorite Contact Phone numbers so they are NOTE: Your phone must be capable of SMS messaging easily accessible on the Main Phone screen. via Bluetooth for messaging features to work properly. Your mobile phone’s audio is transmitted through your •...
Page 152 150 UNDERSTANDING THE FEATURES OF YOUR VEHICLE The Uconnect Phone allows up to ten mobile phones or WARNING! audio devices to be linked to the system. Only one linked (or paired) mobile phone and one audio device can be Any voice commanded system should be used only used with the system at a time.

Page 153: Operation

Page 154 152 UNDERSTANDING THE FEATURES OF YOUR VEHICLE form voice command “Search for John Smith,” or you Smith.” For multiple inputs in the same phrase or sen- can break the compound command form into two tence, the system identifies the topic or context and voice commands: “Search Contact”...
Page 155 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 153 To activate the Uconnect Phone from idle, simply push NOTE: the Phone button on your steering wheel and say a • You must have Bluetooth enabled on your mobile command or say “help.” All Uconnect Phone sessions phone to complete this procedure.
Page 156 154 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • Press the “Add Device” button on the touchscreen. • Search for available devices on your Bluetooth en- abled mobile phone. When prompted on the phone, enter the name and PIN shown on the Uconnect screen.
Page 157 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 155 Pair Additional Mobile Phones 1. Press the “Settings” button from the Phone main screen. 2. Press the “Add Device” button on the touchscreen. 3. Search for available devices on your Bluetooth enabled mobile phone. When prompted on the phone, enter the name and PIN shown on the Uconnect screen.
Page 158 156 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: For phones which are not made a favorite, the NOTE: If there is no device currently connected with the phone priority is determined by the order in which it was system, a pop-up will appear. paired.
Page 159 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 157 You can also use the following VR command to bring up 4. Press the “X” to exit out of the Settings screen. a list of paired audio devices: Disconnecting A Phone Or Audio Device •...
Page 160 158 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 2. Press the “Pair Phones” or “Paired Audio Devices” 5. Press the “Make Favorite” button on the touchscreen; button on the touchscreen. you will see the chosen device move to the top of the list.
Page 161 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 159 • Automatic download and update of a phone book, if edited on the mobile phone. The changes are trans- supported, begins as soon as the Bluetooth wireless ferred and updated to Uconnect Phone on the next phone connection is made to the Uconnect Phone, for phone connection.
Page 162 160 UNDERSTANDING THE FEATURES OF YOUR VEHICLE record. Select an empty entry and press the “+” on that selected entry. When the Options pop-up appears, press “Add from Mobile.” You will then be asked which contact and number to choose from your mo- bile phonebook.
Page 163 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 161 To Remove A Favorite 1. To remove a Favorite, select phonebook from the Phone main screen. 2. Next select Favorites on the left side of the screen and then press the “+” Options button on the touchscreen. 3.
Page 164 162 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Emergency And Towing Assistance The Emergency and Towing Assistance Favorite numbers can only be altered. These cannot be deleted and the names cannot be changed. To change the Emergency or Towing Assistance numbers follow these steps.

Page 165: Phone Call Features

Page 166 164 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 3. The Uconnect Phone will dial the number associated Touch-Tone Number Entry with John Doe, or if there are multiple numbers it will 1. Press the “Phone” button on the touchscreen. ask which number you want to call for John Doe. 2.
Page 167 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 165 • Missed Calls Recent Calls • All Calls You may browse up to 34 of the most recent of each of the following call types: These can be accessed by pressing the “recent calls” button on the touchscreen on the Phone main screen.
Page 168 166 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Push the Phone button on the steering wheel to Making A Second Call While Current Call Is In accept the call. You can also press the “answer” button Progress on the touchscreen or press the caller ID box. You can place a call on hold by pressing the “Hold”...
Page 169 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 167 Toggling Between Calls Redial If two calls are in progress (one active and one on hold), Press the “Redial” button on the touchscreen, or push the press the “Swap” button on the Phone main screen. Only Phone button and after the “Listening”...

Page 170: Uconnect Phone Features

Page 171 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 169 NOTE: The roadside/towing assistance number dialed is WARNING! based on the country where the vehicle is purchased (1-800-521-2779 for the U.S./Canada, 55-14-3454 for Your phone must be turned on and connected to the Mexico City and 1-800-712-3040 for outside Mexico City Uconnect Phone to allow use of this vehicle feature in Mexico).
Page 172 170 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Working With Automated Systems numbers, is also to be used for navigating through an automated customer service center menu structure, This method is used in instances where one generally has and to leave a number on a pager. to push numbers on the mobile phone keypad while navigating through an automated telephone system.
Page 173 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 171 • You may not hear all of the tones due to mobile phone Say the full name” you could push the Voice Com- network configurations. This is normal. mand button and say, “John Smith” to select that option without having to listen to the rest of the voice •...
Page 174 172 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Phone And Network Status Indicators NOTE: Certain brands of mobile phones do not send the dial ring to the Uconnect Phone to play it on the vehicle Uconnect Phone will provide notification to inform you audio system, so you will not hear it.

Page 175: Advanced Phone Connectivity

Page 176 174 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Performance is maximized under: Even though the system is designed for many languages and accents, the system may not always work for some. • Low-To-Medium Blower Setting NOTE: It is recommended that you do not store names in •...
Page 177 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 175 • Smooth Road Surface Your phone must support SMS over Bluetooth to use this feature. If the Uconnect Phone determines your phone is • Fully Closed Windows not compatible with SMS messaging over Bluetooth the •...
Page 178 176 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: Uconnect Phone SMS is only available when the vehicle is not moving. Read Messages: If you receive a new text message while your phone is connected to Uconnect Phone, an announcement will be made to notify you that you have a new text message.
Page 179 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 177 Send Messages Using Buttons On The Touchscreen: You can send messages using Uconnect Phone. To send a new message: 1. Press the “Phone” button on the touchscreen. 2. Press the “messaging” button on the touchscreen then “New Message.”...
Page 180 178 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Send Messages Using Voice Commands: 1. Push the Phone button. 2. After the “Listening” prompt and the following beep, say “Send message to John Smith mobile.” 3. After the system prompts you for what message you want to send, say the message you wish to send or say “List.”...
Page 181 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 179 4. I can’t talk right now. 17. I’m lost. 5. Call me. 18. See you later. 6. I’ll call you later. Bluetooth Communication Link Mobile phones have been found to lose connection to the 7.
Page 182 180 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Voice Tree...
Page 183 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 181 NOTE: 6. Send dial tones for automated systems is available while a call is active. This is an example that uses a 1. You can replace “John Smith” with any name in your Phonebook Record named “Voicemail Password.”...
Page 184 182 UNDERSTANDING THE FEATURES OF YOUR VEHICLE...
Page 185 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 183 NOTE: 6. You can replace “4” with any message number shown on the screen. 1. You can replace “John Smith” with any name in your mobile or favorite phone book. You can also say “Send 7.
Page 186 184 UNDERSTANDING THE FEATURES OF YOUR VEHICLE...

Page 187: General Information

Page 188 186 UNDERSTANDING THE FEATURES OF YOUR VEHICLE If no command is spoken the system will say one of two WARNING! responses: Any voice commanded system should be used only • I didn’t understand in safe driving conditions following all applicable •...
Page 189 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 187 Pushing the Uconnect Voice Command button while The system will best recognize your speech if the win- the system is speaking is known as “barging in.” The dows are closed, and the heater/air conditioning fan is system will be interrupted, and after the beep, you can set to low.

Page 190: Uconnect Voice Commands

Page 191 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 189 Changing The Volume Starting Voice Recognition (VR) Session In Radio/Player Modes 1. Start a dialogue by pushing the Voice Command In this mode, you can say the following commands: button. NOTE: The commands can be said on any screen when 2.
Page 192 190 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Voice Tree...
Page 193 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 191 NOTE: • You can replace “950 AM” with any other AM or FM frequency, such as “98.7 FM.” • You can replace “80’s on 8” with any other satellite station name received by the radio. •...
Page 194 192 UNDERSTANDING THE FEATURES OF YOUR VEHICLE...
Page 195 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 193 NOTE: • You can replace the album, artist, song, genre, playlist, podcast and audio book names with any correspond- ing names on the current device that is playing. • You can replace “8” with any track on the CD that is currently playing.
Page 196 194 UNDERSTANDING THE FEATURES OF YOUR VEHICLE...
Page 197 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 195 NOTE: • You can replace “NFL” with any league shown on the sports league screen. For example you can say “Show MLB headlines” or “Show PGA headlines.” • You can replace “Headlines” with any menu items shown on a league screen.
Page 198 196 UNDERSTANDING THE FEATURES OF YOUR VEHICLE...
Page 199 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 197 NOTE: • Only available with Navigation equipped vehicles. • You can replace “Player” with “Radio,” “Navigation,” “Phone,” “Climate,” “More” or “Settings.” • Navigation commands only work if equipped with Navigation. • Available Voice Commands are shown in bold face and shaded grey.
Page 200 198 UNDERSTANDING THE FEATURES OF YOUR VEHICLE...

Page 201: Seats

Page 202 200 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Adjusting The Seat Up Or Down The height of the seats can be adjusted up or down. Pull upward or push downward on the seat switch. The seat will move in the direction of the switch. Release the switch when the desired position is reached.

Page 203: Power Lumbar - If Equipped

Page 204: front heated seats - if equipped, page 205: manual front seat adjustments, page 206: recliner adjustment, page 207: driver's seat height adjustment - if equipped, page 208: fold-flat front passenger seat - if equipped, page 209: head restraints.

Page 210 208 UNDERSTANDING THE FEATURES OF YOUR VEHICLE When AHRs deploy during a rear impact, the front half of the head restraint extends forward to minimize the gap between the back of the occupant’s head and the AHR. This system is designed to help prevent or reduce the extent of injuries to the driver and front passenger in certain types of rear impacts.
Page 211 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 209 Active Head Restraint (Normal Position) Active Head Restraint (Tilted) NOTE: • The head restraints should only be removed by quali- fied technicians, for service purposes only. If either of the head restraints require removal, see your autho- rized dealer.
Page 212 210 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • In the event of deployment of an Active Head Re- WARNING! (Continued) straint, refer to “Occupant Restraints/Supplemental • Active Head Restraints may be deployed if they are Active Head Restraints (AHR)/Resetting Active Head struck by an object such as a hand, foot or loose Restraints (AHR)”...
Page 213 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 211 WARNING! A loose head restraint thrown forward in a collision or hard stop could cause serious injury or death to occupants of the vehicle. Always securely stow re- moved head restraints in a location outside the occu- pant compartment.

Page 214: Third Row Passenger Seats - Seven Passenger Models

Page 215: 60/40 split second-row passenger seats.

Page 216 214 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! To prevent personal injury or damage to objects, keep your head, arms, and objects out of the folding path of the seatback. 4. Gently guide the seatback into the folded position. To Unfold The Seat Raise the seatback and lock it in place.
Page 217 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 215 Forward And Rearward Adjustment The control lever is on the outboard side of the seat. Lift the lever to move the seat forward or rearward. Release the lever once the seat is in the desired position. Then, using body pressure, move forward and rearward on the seat to be sure that the seat adjusters have latched.
Page 218 216 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! (Continued) cause you to lose control. The seat belt might not be adjusted properly and you could be injured. Adjust any seat only while the vehicle is parked. Recliner Adjustment The recline lever is on the outboard side of the seat. To recline the seatback, lean back, lift the lever, position the seatback as desired, and then release the lever.
Page 219 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 217 WARNING! (Continued) adjusted properly and you could be injured. Adjust the seat only while the vehicle is parked. • Do not ride with the seatback reclined so that the shoulder belt is no longer resting against your chest.
Page 220 218 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Move the control lever on the upper outboard side of the WARNING! seatback forward. Then, in one fluid motion, the seat cushion flips upward and the seat moves forward on its Keep the latch clean and free of objects and be tracks.
Page 221 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 219 WARNING! Do not drive the vehicle with the seat in this posi- tion, as it is only intended for entering and exiting the third row seats. Failure to follow this warning may result in personal injury. To Unfold And Move The Second-Row Passenger Seat Rearward Move the seatback rearward until it locks in place and...

Page 222: 50/50 Split Third-Row Passenger Seats With Fold-Flat Feature - Seven Passenger Models

Page 223 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 221 To Unfold The Seatback The seatback can also be locked in the reclined position. To do so, pull the latch release-loop located at the top of Grasp the assist strap loop on the seatback and pull it the seatback upward, allow the seatback to recline, and toward you to raise the seatback.

Page 224: To Open And Close The Hood

Page 225 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 223 Underhood Safety Latch Hood Prop Rod 3. Use the hood prop rod to secure the hood in the open CAUTION! position. Place the upper end of the prop rod in the hole on the underside of the hood. To prevent possible damage: •...

Page 226: Lights

Page 227: automatic headlights - if equipped, page 228: headlight time delay, page 229: lights-on reminder, page 230: multifunction lever, page 231: lane change assist.

Page 232 230 UNDERSTANDING THE FEATURES OF YOUR VEHICLE light. To restore interior light operation, either place the ignition in the ON/RUN position or cycle the light switch. Dimmer Controls The dimmer control is part of the headlight switch and is located on the left side of the instrument panel. Rotating the dimmer control upward with the parking lights or headlights on will increase the brightness of the instru- ment panel lights, door map pockets and cupholders (if...

Page 233: Map/Reading Lights

Page 234: intermittent wiper system, page 235: windshield wiper operation, page 236: windshield washers, page 237: mist feature, page 238: tilt/telescoping steering column, page 239: heated steering wheel - if equipped, page 240: understanding the features of your vehicle, page 241: to activate, page 242: to deactivate, page 243: to accelerate for passing, page 244: parksense rear park assist - if equipped, page 245: parksense sensors.

Page 246 244 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Park Assist Ready Park Assist System Off The system will indicate a detected obstacle by showing three solid arcs and will produce a one-half second tone. As the vehicle moves closer to the obstacle, the EVIC display will show fewer arcs and the sound tone will change from slow, to fast, to continuous.
Page 247 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 245 Slow Tone Fast Tone...
Page 248 246 UNDERSTANDING THE FEATURES OF YOUR VEHICLE The vehicle is close to the obstacle when the warning display shows one flashing arc and sounds a continuous tone. The following chart shows the warning alert opera- tion when the system is detecting an obstacle: Continuous Tone...

Page 249: Enabling And Disabling Parksense

Page 250: cleaning the parksense system.

Page 251 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 249 • When you move the shift lever to the REVERSE PARK ASSIST SYSTEM” message to be displayed in position and ParkSense is turned off, the EVIC will the EVIC. display the “PARK ASSIST SYSTEM OFF” message for as long as the vehicle is in REVERSE.

Page 252: Parkview Rear Back Up Camera - If Equipped

Page 253 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 251 When the vehicle is shifted out of REVERSE, the rear vehicle to assist with parking or aligning to a hitch/ camera mode is exited and the last selected touchscreen receiver. The static grid lines will show separate zones appears again.

Page 254: Overhead Console

Page 255: courtesy/reading lights, page 256: sunglasses storage, page 257: power sunroof switch - if equipped.

Page 258 256 UNDERSTANDING THE FEATURES OF YOUR VEHICLE HomeLink Buttons/Overhead Consoles HomeLink Buttons/Sunvisor/Headliner NOTE: HomeLink is disabled when the Vehicle Security Alarm is active.

Page 259: Before You Begin Programming Homelink

Page 260 258 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 2. Place the hand-held transmitter 1 to 3 inches (3 to 8 cm) away from the HomeLink button you wish to program while keeping the HomeLink indicator light in view. 3. Push and hold the HomeLink button you want to program while you push and hold the hand-held transmitter button.

Page 261: Programming A Non-Rolling Code

Page 262 260 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • To program the two remaining HomeLink buttons, 2. Place the hand-held transmitter 1 to 3 inches (3 to 8 cm) away from the HomeLink button you wish to repeat each step for each remaining button. DO NOT program while keeping the HomeLink indicator light erase the channels.

Page 263: Canadian/Gate Operator Programming

Page 264: using homelink, page 265: troubleshooting tips, page 266: general information.

Page 267 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 265 WARNING! (Continued) accessible to children. Do not leave the ignition of a vehicle equipped with Keyless Enter-N-Go in the ACC or ON/RUN mode. Occupants, particularly unattended children, can become entrapped by the power sunroof while operating the power sunroof switch.

Page 268: Opening Sunroof - Express

Page 269: venting sunroof - express, page 270: ignition off operation.

Page 271 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 269 A second 12 Volt (13 Amp) power outlet is located inside A third fused 12 Volt power outlet is located on the back the center console storage area. Power is available with of the center console. This power outlet has power the ignition is in the ON/RUN, ACC or LOCK position.
Page 272 270 UNDERSTANDING THE FEATURES OF YOUR VEHICLE A fourth fused 12 Volt power outlet is located on the left NOTE: To ensure proper operation a MOPAR knob and quarter trim panel in the cargo area. This power outlet element must be used. has power available when the ignition is in the ON or ACC position.
Page 273 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 271 WARNING! To avoid serious injury or death: • Only devices designed for use in this type of outlet should be inserted into any 12 Volt outlet. • Do not touch with wet hands. •...

Page 274: Power Inverter - If Equipped

Page 275 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 273 may have to be reset manually. To reset the inverter manually press the power inverter button OFF and ON. To avoid overloading the circuit, check the power ratings on electrical devices prior to using the inverter. NOTE: Due to built-in overload protection, the power outlet will shut down if the 115 Volt AC (150 Watt maximum) power rating is exceeded.

Page 276: Power Inverter Operation

Page 277 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 275 For passengers in the second row there are two cuphold- For vehicles equipped with third row seating, there are ers, located in the center armrest between the two seats. additional cupholders located in the trim panels. When the armrest is folded flat the cupholders are in the In addition to cupholders, vehicles may also be equipped back of the Head Restraint.

Page 278: Storage

Page 279: floor console storage.

Page 280 278 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Center Console Storage Tray Center Console Storage Compartment The storage tray can be slid forward and rearward or WARNING! removed to access the center console storage compart- ment. Do not operate this vehicle with a console compart- ment lid in the open position.

Page 281: Flip 'N Stow Front Passenger Seat Storage - If Equipped

Page 282: second-row map pocket and grocery retainers - if equipped, page 283: in-floor storage bin with removable liner, page 284: cargo area features, page 285: cargo management system.

Page 286 284 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Seven Passenger System Features Cargo Tie-Downs • A large built-in storage bin with a hinged hardcover WARNING! located in the floor behind the third-row passenger seats. Cargo tie-downs are not safe anchors for a child seat tether strap.
Page 287 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 285 WARNING! (Continued) handling. To avoid loss of control resulting in per- sonal injury, follow these guidelines for loading your vehicle: • Do not carry loads that exceed the load limits de- scribed on the label attached to the left door or left door center pillar.
Page 288 286 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • To help protect against personal injury, passengers The cover rolls away neatly inside its housing when not should not be seated in the rear cargo area. The rear in use. You can also remove the cover from the vehicle to cargo space is intended for load carrying purposes make more room in the cargo area.
Page 289 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 287 the trim panels. Lower the cover to position the posts into the bottom of the notches and release the handle. Installing Retractable Cargo Area Cover Insert the spring-loaded post on the opposite end of the cover housing into the attachment point on the opposite Positioning Retractable Cargo Area Cover side of the vehicle.

Page 290: Rear Window Features

Page 291 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 289 pump will continue to operate as long as the switch is wiper will resume function at whichever position the held. Upon release, the wiper will cycle three times switch is set at. before returning to the set position. CAUTION! •...

Page 292: Rear Window Defroster

Page 293 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 291 cross rails. In addition, the roof rack does not increase the total load carrying capacity of the vehicle. Be sure the total load of cargo inside the vehicle plus that on the roof rack does not exceed the maximum vehicle load capacity.
Page 294 292 UNDERSTANDING THE FEATURES OF YOUR VEHICLE crossbar and four rearward marks for the rear cross- Check the straps frequently to be sure that the load bar. Make sure the crossbars remain equally spaced or remains securely attached. parallel at any position for proper function. CAUTION! 3.
Page 295 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 293 CAUTION! (Continued) WARNING! 150 lb (68 kg). Always distribute heavy loads as Cargo must be securely tied before driving your evenly as possible and secure the load appropri- vehicle. Improperly secured loads can fly off the ately.
Page 297 UNDERSTANDING YOUR INSTRUMENT PANEL CONTENTS ▫ Electronic Vehicle Information Center (EVIC) INSTRUMENT PANEL FEATURES ..298 Displays ......329 INSTRUMENT CLUSTER .
Page 298 296 UNDERSTANDING YOUR INSTRUMENT PANEL ▫ Important Notes For Single Video Screen UCONNECT SETTINGS ....336 System ......367 ▫...
Page 299 UNDERSTANDING YOUR INSTRUMENT PANEL 297 ▫ Manual Three Zone Climate Controls With STEERING WHEEL AUDIO CONTROLS ..385 Touchscreen — If Equipped ....388 ▫...

Page 300: Instrument Panel Features

Page 301: instrument cluster.

Page 302 300 UNDERSTANDING YOUR INSTRUMENT PANEL 1. Tachometer 5. Temperature Gauge • Indicates the engine speed in revolutions per minute • The temperature gauge shows engine coolant tem- (RPM x 1000). perature. Any reading within the normal range indi- cates that the engine cooling system is operating 2.

Page 303: Warning And Indicator Lights

Page 304: red telltale indicator lights.

Page 305 UNDERSTANDING YOUR INSTRUMENT PANEL 303 Air Bag Warning Light Red Telltale What It Means Light Air Bag Warning Light This light will turn on for four to eight seconds as a bulb check when the ignition switch is first turned to ON/RUN. If the light is either not on during starting, stays on, or turns on while driving, have the system inspected at an authorized dealer as soon as possible.
Page 306 304 UNDERSTANDING YOUR INSTRUMENT PANEL Brake Warning Light Red Telltale What It Means Light Brake Warning Light This light monitors various brake functions, including brake fluid level and parking brake ap- plication. If the brake light turns on it may indicate that the parking brake is applied, that the brake fluid level is low, or that there is a problem with the anti-lock brake system reservoir.
Page 307 UNDERSTANDING YOUR INSTRUMENT PANEL 305 The light will remain on until the cause is corrected. Brake Warning Light will turn on along with the ABS Light. Immediate repair to the ABS system is required. NOTE: The light may flash momentarily during sharp cornering maneuvers, which change fluid level condi- Operation of the Brake Warning Light can be checked by tions.
Page 308 306 UNDERSTANDING YOUR INSTRUMENT PANEL Vehicle Security Warning Light — If Equipped Red Telltale What It Means Light Vehicle Security Warning Light This light will flash at a fast rate for approximately 15 seconds when the vehicle security alarm is arming, and then will flash slowly until the vehicle is disarmed.
Page 309 UNDERSTANDING YOUR INSTRUMENT PANEL 307 Engine Temperature Warning Light Red Warning What It Means Light Engine Temperature Warning Light This light warns of an overheated engine condition. As engine coolant temperatures rise and the gauge approaches H, this indicator will illuminate and a single chime will sound after reaching a set threshold.
Page 310 308 UNDERSTANDING YOUR INSTRUMENT PANEL Transmission Temperature Warning Light Red Telltale What It Means Light Transmission Temperature Warning Light This light indicates that the transmission fluid temperature is running hot. This may occur with severe usage. If this light turns on, safely pull over and stop them vehicle. Then, shift the trans- mission into NEUTRAL and run the engine at idle or faster until the light turns off.
Page 311 UNDERSTANDING YOUR INSTRUMENT PANEL 309 Charging System Warning Light Red Telltale What It Means Light Charging System Warning Light This light shows the status of the electrical charging system. If the light stays on or comes on while driving, turn off some of the vehicle’s nonessential electrical devices or increase engine speed (if at idle).
Page 312 310 UNDERSTANDING YOUR INSTRUMENT PANEL Oil Pressure Warning Light Red Telltale What It Means Light Oil Pressure Warning Light This light indicates low engine oil pressure. If the light turns on while driving, stop the ve- hicle and shut off the engine as soon as possible. A chime will sound when this light turns Do not operate the vehicle until the cause is corrected.
Page 313 UNDERSTANDING YOUR INSTRUMENT PANEL 311 Electronic Throttle Control (ETC) Warning Light Red Telltale What It Means Light Electronic Throttle Control (ETC) Warning Light This light informs you of a problem with the Electronic Throttle Control (ETC) system. If a problem is detected while the engine is running, the light will either stay on or flash de- pending on the nature of the problem.
Page 314 312 UNDERSTANDING YOUR INSTRUMENT PANEL Electric Power Steering Fail Warning — If Equipped Red Telltale What It Means Light Electric Power Steering Fail Warning This light is used to manage the electrical warning of the EPS (Power Steering System). Re- fer to “Power Steering”...
Page 315 UNDERSTANDING YOUR INSTRUMENT PANEL 313 Liftgate Open Warning Light Red Telltale What It Means Light Liftgate Open Warning Light This indicator will turn when the liftgate is open. NOTE: If the vehicle is moving there will also be a single chime.

Page 316: Yellow Telltale Indicator Lights

Page 317 UNDERSTANDING YOUR INSTRUMENT PANEL 315 CAUTION! WARNING! Prolonged driving with the Malfunction Indicator A malfunctioning catalytic converter, as referenced Light (MIL) on could cause damage to the engine above, can reach higher temperatures than in normal control system. It also could affect fuel economy and operating conditions.
Page 318 316 UNDERSTANDING YOUR INSTRUMENT PANEL Electronic Stability Control (ESC) Indicator Light — If Equipped Yellow Telltale What It Means Light Electronic Stability Control (ESC) Indicator Light The “ESC Indicator Light” in the instrument cluster will come on when the ignition switch is turned to the ON/RUN position.
Page 319 UNDERSTANDING YOUR INSTRUMENT PANEL 317 Electronic Stability Control (ESC) OFF Indicator Light — If Equipped Yellow Telltale What It Means Light Electronic Stability Control (ESC) OFF Indicator Light This light indicates the Electronic Stability Control (ESC) is off. With Drive Modes the ESC OFF indicator will be lit any time the Traction modes is set to Sport, Track or Full OFF.
Page 320 318 UNDERSTANDING YOUR INSTRUMENT PANEL Tire Pressure Monitoring Indicator Light Yellow Telltale What It Means Light Tire Pressure Monitoring Indicator Light The warning light switches on and a message is displayed to indicate that the tire pressure is lower than the recommended value and/or that slow pressure loss is occurring. In these cases, optimal tire duration and fuel consumption may not be guaranteed.
Page 321 UNDERSTANDING YOUR INSTRUMENT PANEL 319 on the vehicle placard or tire inflation pressure label, you Your vehicle has also been equipped with a TPMS should determine the proper tire inflation pressure for malfunction indicator to indicate when the system is not those tires.
Page 322 320 UNDERSTANDING YOUR INSTRUMENT PANEL CAUTION! CAUTION! (Continued) type, and/or style. Aftermarket wheels can cause The TPMS has been optimized for the original sensor damage. Using aftermarket tire sealants may equipment tires and wheels. TPMS pressures and cause the Tire Pressure Monitoring System (TPMS) warning have been established for the tire size sensor to become inoperable.
Page 323 UNDERSTANDING YOUR INSTRUMENT PANEL 321 Anti-Lock Brake (ABS) Indicator Light Yellow Telltale What It Means Light Anti-Lock Brake (ABS) Indicator Light This light monitors the Anti-Lock Brake System (ABS). The light will turn on when the igni- tion switch is placed in the ON/RUN position and may stay on for as long as four seconds. If the ABS light remains on or turns on while driving, then the Anti-Lock portion of the brake system is not functioning and service is required.
Page 324 322 UNDERSTANDING YOUR INSTRUMENT PANEL Low Fuel Indicator Light Yellow Telltale What It Means Light Low Fuel Indicator Light When the fuel level reaches approximately 3.0 gal (11.0 L) this light will turn on, and remain on until fuel is added. Low Washer Fluid Indicator Light —...

Page 325: Green Telltale Indicator Lights

Page 326 324 UNDERSTANDING YOUR INSTRUMENT PANEL Turn Signal Indicator Lights Green Tell- What It Means tale Light Turn Signal Indicator Lights The instrument cluster arrow will flash independently for the LEFT or RIGHT turn signal as se- lected, as well as the exterior turn signal lamp(s) (front and rear) as selected when the multi- function lever is moved down (LEFT) or up (RIGHT).

Page 327: White Telltale Indicator Light

Page 328: blue telltale indicator light, page 329: electronic vehicle information center (evic).

Page 330 328 UNDERSTANDING YOUR INSTRUMENT PANEL • DOWN Arrow Button The system allows the driver to select information by pushing the following buttons mounted on the steering Push and release the DOWN button to scroll wheel: downward through the main menus and submenus.

Page 331: Electronic Vehicle Information Center (Evic) Displays

Page 332 330 UNDERSTANDING YOUR INSTRUMENT PANEL • Unstored Messages Until RUN When the appropriate conditions exist, the EVIC displays the following messages: These messages deal primarily with the Remote Start • Remote Start aborted — Door ajar feature. This message type is displayed until the ignition is in the RUN state.

Page 333: Oil Change Due

Page 334: fuel economy.

Page 335 UNDERSTANDING YOUR INSTRUMENT PANEL 333 show dashes for two seconds. Then, the history informa- determined by a weighted average of the instantaneous tion will be erased, and the averaging will continue from and average fuel economy, according to the current fuel the last fuel average reading before the reset.

Page 336: Vehicle Speed

Page 337: tire pressure, page 338: messages, page 339: buttons on the touchscreen.

Page 340 338 UNDERSTANDING YOUR INSTRUMENT PANEL setting buttons on the touchscreen or by selecting any point on the scale between the “+” and “–” buttons on the touchscreen. Then press the back arrow button on the touchscreen. • Mode Press the “Mode” button on the touchscreen to change this display.
Page 341 UNDERSTANDING YOUR INSTRUMENT PANEL 339 • Touchscreen Beep the language preferred. Then press the back arrow button on the touchscreen. As you continue, the information will Press the “Touchscreen Beep” button on the touchscreen display in the selected language. to turn on or shut off the sound heard when a button on •...
Page 342 340 UNDERSTANDING YOUR INSTRUMENT PANEL • Show Time Status Safety & Driving Assistance • Park Assist — If Equipped Press the “Show Time Status” button on the touchscreen to change this display. When in this display, you may Press the “Park Assist” button on the touchscreen to turn on or shut off the digital clock in the status bar.
Page 343 UNDERSTANDING YOUR INSTRUMENT PANEL 341 • Headlights With Wipers Brake Control System” in “Starting And Operating” for system function and operating information. To make Press the “Headlights With Wipers” button on the touch- your selection, press the “Hill Start Assist” button on the screen to change this display.
Page 344 342 UNDERSTANDING YOUR INSTRUMENT PANEL touchscreen. Refer to “Automatic Headlights — If the “Steering Directed Lights” button on the touchscreen Equipped” in “Understanding The Features Of Your and select “ON” or ‘OFF.” Then press the back arrow Vehicle” for further information. button on the touchscreen.
Page 345 UNDERSTANDING YOUR INSTRUMENT PANEL 343 • Flash Lamps With Lock Doors & Locks • Auto Unlock On Exit Press the “Flash Lamps With Lock” button on the touch- screen to change this display. When this feature is se- Press the “Auto Unlock On Exit” button on the touch- lected, the exterior lamps will flash when the doors are screen to change this display.
Page 346 344 UNDERSTANDING YOUR INSTRUMENT PANEL • Sounds Horn With Lock passenger’s doors. When Unlock All Doors On 1st Press is selected, all of the doors will unlock on the first press Press the “Sounds Horn With Lock” button on the of the RKE transmitter UNLOCK button.
Page 347 UNDERSTANDING YOUR INSTRUMENT PANEL 345 • Passive Entry (Keyless Enter-N-Go) — If Equipped Seats” button on the touchscreen and select “ON” or “OFF.” Then press the back arrow button on the touch- Press the “Passive Entry” button on the touchscreen to screen.
Page 348 346 UNDERSTANDING YOUR INSTRUMENT PANEL equipped), power sunroof (if equipped), and power NOTE: Keep magnetic materials away from the top of the outlets will remain active for up to 10 minutes after the instrument panel, such as iPod’s, Mobile Phones, Lap- ignition is cycled to OFF.
Page 349 UNDERSTANDING YOUR INSTRUMENT PANEL 347 • Calibration Audio • Equalizer Press the “Calibration” button on the touchscreen to change this setting. This compass is self-calibrating, Press the “Equalizer” button on the touchscreen to which eliminates the need to manually reset the compass. change this display.
Page 350 348 UNDERSTANDING YOUR INSTRUMENT PANEL • Speed Adjusted Volume “Surround Sound” button on the touchscreen and select “ON” or “OFF.” Then press the back arrow button on the Press the “Speed Adjusted Volume” button on the touch- touchscreen. screen to change this display. This feature increases or decreases volume relative to vehicle speed.

Page 351: Customer Programmable Features - Uconnect System 8.4 Settings

Page 352 350 UNDERSTANDING YOUR INSTRUMENT PANEL • Display Brightness With Headlights ON Once the setting is complete press the Back Arrow button on the touchscreen to return to the previous menu or When in this display, you may select the brightness with press the “X”...
Page 353 UNDERSTANDING YOUR INSTRUMENT PANEL 351 functions and the navigation system (if equipped). Press Length, press the “Brief” or “Detailed” button on the the “Set Language” button on the touchscreen and then touchscreen until a check-mark appears next to the press the desired language button on the touchscreen setting, showing that setting has been selected.
Page 354 352 UNDERSTANDING YOUR INSTRUMENT PANEL • Sync With GPS Time — If Equipped Cluster” button on the touchscreen, until a check-mark appears next to the setting, showing that setting has been When in this display, you may automatically have the selected.
Page 355 UNDERSTANDING YOUR INSTRUMENT PANEL 353 • Set Time Minutes • Show Time In Status Bar — If Equipped When in this display, you may adjust the minutes. The When in this display, you may turn on or shut off the “Sync with GPS Time”...
Page 356 354 UNDERSTANDING YOUR INSTRUMENT PANEL Assist status, press and release the “OFF,” “Sound Only” setting, showing that setting has been selected. Press the or “Sounds and Display” button. Then press the back back arrow button on the touchscreen to return to the arrow button on the touchscreen.
Page 357 UNDERSTANDING YOUR INSTRUMENT PANEL 355 • Headlights Off Delay • Headlights With Wipers — If Equipped When this feature is selected, it allows the adjustment of When this feature is selected, and the headlight switch is the amount of time the headlights remain on after the in the AUTO position, the headlights will turn on ap- engine is shut off.
Page 358 356 UNDERSTANDING YOUR INSTRUMENT PANEL to the previous menu. Refer to “Automatic Headlights — to setting, showing that setting has been selected. Press If Equipped” in “Understanding The Features Of Your the back arrow button on the touchscreen to return to the Vehicle”...
Page 359 UNDERSTANDING YOUR INSTRUMENT PANEL 357 • Auto Unlock On Exit • Flash Headlights With Lock When this feature is selected, all doors will unlock when When this feature is selected, the signal lights will flash the vehicle is stopped and the transmission is in the when the doors are locked with the Remote Keyless PARK or NEUTRAL position and the driver’s door is Entry (RKE) transmitter.
Page 360 358 UNDERSTANDING YOUR INSTRUMENT PANEL • Sound Horn With Remote Start NOTE: If the vehicle is programmed to Unlock All Doors 1st Press, all doors will unlock no matter which Passive When this feature is selected, the horn will sound when Entry equipped door handle is grasped.
Page 361 UNDERSTANDING YOUR INSTRUMENT PANEL 359 • Auto-On Driver Heated Seat With Vehicle Start — If arrow button on the touchscreen to return to the previous menu. Refer to “Keyless Enter-N-Go” in “Things To Equipped Know Before Starting Your Vehicle.” When this feature is selected the driver’s heated seat will Auto-On Comfort &...
Page 362 360 UNDERSTANDING YOUR INSTRUMENT PANEL • Variance after the ignition is cycled to OFF. Opening either front door will cancel this feature. To change the Engine Off Compass Variance is the difference between Magnetic Power Delay status press the “0 seconds,” “45 seconds, North and Geographic North.
Page 363 UNDERSTANDING YOUR INSTRUMENT PANEL 361 the compass by pressing the “ON” button on the touch- screen and completing one or more 360-degree turns (in an area free from large metal or metallic objects) until the CAL indicator displayed in the EVIC turns off. The compass will now function normally.
Page 364 362 UNDERSTANDING YOUR INSTRUMENT PANEL point on the scale between the “+” and “–” buttons on the Phone/Bluetooth touchscreen. Then press the back arrow button on the After pressing the “Phone/Bluetooth” button on the touchscreen. touchscreen the following settings will be available. NOTE: Bass/Mid/Treble allow you to simply slide your •...

Page 365: Equipped

Page 366: single video screen, page 367: play video games, page 368: listen to an audio source on channel 2 while a video is playing on channel 1, page 369: important notes for single video screen system, page 370: play a dvd using the touchscreen radio, page 371: ves remote control - if equipped.

Page 372 370 UNDERSTANDING YOUR INSTRUMENT PANEL – In radio modes, push to seek the next tunable 10. PROG Up/Down – When listening to a radio mode, station. In disc modes, push and hold to fast forward pushing PROG Up selects the next preset and push- through the current audio track or video chapter.

Page 373: Remote Control Storage

Page 374: locking the remote control, page 375: ves headphones operation, page 376: replacing the headphone batteries, page 377: unwired stereo headphone lifetime limited warranty.

Page 378 376 UNDERSTANDING YOUR INSTRUMENT PANEL INCIDENTAL, CONSEQUENTIAL, EXEMPLARY, PU- EXCLUSIVE REMEDY REGARDING DEFECTIVE NITIVE OR OTHER DAMAGES OF ANY KIND OR PRODUCTS, AND IS IN LIEU OF ALL OTHER WAR- NATURE WHATSOEVER. Some states and jurisdictions RANTIES (EXPRESS OR IMPLIED), INCLUDING ANY may not allow the exclusion or limitation of incidental or WARRANTY OR MERCHANTABILITY OR FITNESS consequential damages, so the above limitation may not...

Page 379: System Information

Page 380 378 UNDERSTANDING YOUR INSTRUMENT PANEL 4. Channel 2 Mode — Displays the current source for Numeric Keypad Menu Channel 2. 5. Remote Locked Out — When the icon is displayed, the remote control functions are disabled. 6. Clock — Displays the time. 7.
Page 381 UNDERSTANDING YOUR INSTRUMENT PANEL 379 1. Push the remote control’s navigation buttons ( , , , Disc Menu ) to navigate to the desired digit. When listening to a CD Audio or CD Data disc, pushing the remote control’s MENU button displays a list of all 2.
Page 382 380 UNDERSTANDING YOUR INSTRUMENT PANEL on the screen. The factory default settings are already set for optimum viewing, so there is no need to change these settings under normal circumstances. To change the settings, push the remote control’s naviga- tion buttons to select an item, then push the remote control’s navigation buttons to change the value for the currently selected item.
Page 383 UNDERSTANDING YOUR INSTRUMENT PANEL 381 • CD Data discs with MP3 and WMA compressed audio 3. To change the current audio mode, push the remote control’s MODE button. This will automatically select format files the next available audio mode without using the •...
Page 384 382 UNDERSTANDING YOUR INSTRUMENT PANEL • For multi-session CDs that contain only multiple CD- increase the volume level to account for this change in level, remember to lower the volume before changing the Audio sessions, the player will renumber the tracks so disc or to another mode.
Page 385 UNDERSTANDING YOUR INSTRUMENT PANEL 383 The recommended method for labeling recordable discs “.m4a”. To prevent incorrect playback, do not use (CD-R, CD-RW, DVD-R and DVD-RW) is with a perma- these extensions for any other types of files. nent marker. Do not use adhesive labels as they may •...
Page 386 384 UNDERSTANDING YOUR INSTRUMENT PANEL between 64 and 192Kbps. Variable bit rates are also If a disc has a damaged track which results in audible or supported. For both formats, the recommended visible errors that persists for 2.0 seconds, the DVD sample rate is either 44.1kHz or 48kHz.

Page 387: Ipod/Usb/Mp3 Control

Page 388: right-hand switch functions, page 389: cd/dvd disc maintenance, page 390: climate controls.

Page 391 UNDERSTANDING YOUR INSTRUMENT PANEL 389 Uconnect 4.3 Manual with Touchscreen Climate Button Manual Temperature Controls — Buttons On The On The Faceplate Faceplate Buttons On The Touchscreen Buttons on the touchscreen are accessible on the Uconnect system screen.
Page 392 390 UNDERSTANDING YOUR INSTRUMENT PANEL Uconnect 4.3 Manual 3 — Zone Temperature Controls — Uconnect 8.4 Manual 3 — Zone Temperature Controls — Buttons On The Touchscreen Buttons On The Touchscreen...
Page 393 UNDERSTANDING YOUR INSTRUMENT PANEL 391 Button Descriptions (Applies To Both Buttons On The 4. Front Defrost Button Faceplate And Buttons On The Touchscreen) Press and release to change the current airflow setting to 1. MAX A/C Button Defrost mode. The indicator illuminates when this fea- ture is ON.
Page 394 392 UNDERSTANDING YOUR INSTRUMENT PANEL 6. Rear Climate Button — If Equipped CAUTION! Press and release this button to turn on the rear climate Failure to follow these cautions can cause damage to controls. The indicator will illuminate when the rear the heating elements: climate controls are ON.
Page 395 UNDERSTANDING YOUR INSTRUMENT PANEL 393 NOTE: Pressing this button while in Sync mode will Blower Control Knob On The Faceplate automatically exit Sync. The blower speed increases as you turn the blower control knob clockwise from the lowest blower setting. 9.
Page 396 394 UNDERSTANDING YOUR INSTRUMENT PANEL • Panel Mode • Floor Mode Air comes from the outlets in the instrument Air comes from the floor outlets. A slight panel. Each of these outlets can be individu- amount of air is directed through the defrost ally adjusted to direct the flow of air.
Page 397 UNDERSTANDING YOUR INSTRUMENT PANEL 395 NOTE: In Sync mode, this button will also automatically temperatures. Driver and passenger have independent adjust the passenger temperature setting at the same temperature control if Sync mode is not illuminated. time. Climate Control Functions 14.
Page 398 396 UNDERSTANDING YOUR INSTRUMENT PANEL • If fog or mist appears on the windshield or side glass, In MAX A/C, the blower level and mode position can be select Defrost mode and adjust blower speed if adjusted to desired user settings. Pressing other settings needed.

Page 399: Rear Manual Temperature Control (Mtc) - If Equipped

Page 400 398 UNDERSTANDING YOUR INSTRUMENT PANEL Uconnect 4.3 Manual Rear Climate Buttons On The Uconnect 8.4 Manual Rear Climate Button On The Touchscreen Controls Screen Touchscreen Controls Screen 1 — Blower Up Button 5 — Done Button 1 — Rear Lock Button 5 —...
Page 401 UNDERSTANDING YOUR INSTRUMENT PANEL 399 Controlling The Rear Climate Controls From The a lock symbol in the rear display. The rear temperature Front Uconnect Touchscreen and air source are controlled from the front Uconnect system. The Three-Zone climate control system allows for adjust- •...
Page 402 400 UNDERSTANDING YOUR INSTRUMENT PANEL to high. This allows the rear seat occupants to control the volume of air circulated in the rear of the vehicle. CAUTION! Interior air enters the Rear Automatic Temperature Control System through an intake grille, located in the right side trim panel.

Page 403: Automatic Three Zone Temperature Control (Atc) With Touchscreen - If Equipped

Page 404 402 UNDERSTANDING YOUR INSTRUMENT PANEL Uconnect 4.3 Automatic Climate Button On The Automatic Temperature Controls — Buttons On The Faceplate Faceplate Buttons On The Touchscreen Buttons On The Touchscreen are accessible on the Uconnect system screen.
Page 405 UNDERSTANDING YOUR INSTRUMENT PANEL 403 Uconnect 4.3 Automatic 3 — Zone Temperature Controls Uconnect 8.4 Automatic 3 — Zone Temperature Controls — Buttons On The Touchscreen — Buttons On The Touchscreen...
Page 406 404 UNDERSTANDING YOUR INSTRUMENT PANEL Button Descriptions (Applies To Both Buttons On The 4. AUTO Operation Button Faceplate And Buttons On The Touchscreen) Automatically controls the interior cabin temperature by 1. MAX A/C Button adjusting airflow distribution and amount. Performing this function will cause the ATC to switch between Press and release to change the current setting, the manual mode and automatic modes.
Page 407 UNDERSTANDING YOUR INSTRUMENT PANEL 405 6. Rear Defrost Button CAUTION! (Continued) Press and release this button to turn on the rear window • Do not use scrapers, sharp instruments, or abrasive defroster and the heated outside mirrors (if equipped). window cleaners on the interior surface of the An indicator will illuminate when the rear window window.
Page 408 406 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: Pressing this button while in Sync mode will 11. Blower Control automatically exit Sync. Blower control is used to regulate the amount of air forced 9. Passenger Temperature Control Down Button through the climate system. There are seven blower speeds (Uconnect 8.4) available.
Page 409 UNDERSTANDING YOUR INSTRUMENT PANEL 407 12. Modes NOTE: BI-LEVEL mode is designed under comfort con- ditions to provide cooler air out of the panel outlets and The airflow distribution mode can be adjusted so air warmer air from the floor outlets. comes from the instrument panel outlets, floor outlets •...
Page 410 408 UNDERSTANDING YOUR INSTRUMENT PANEL 14. Driver Temperature Control Down Button (Uconnect the passenger compartment. Moving the temperature bar 8.4) into the red area, indicates warmer temperatures. Mov- ing the temperature bar into the blue area indicates cooler Provides the driver with independent temperature con- temperatures.
Page 411 UNDERSTANDING YOUR INSTRUMENT PANEL 409 NOTE: If fog or mist appears on the windshield or side Recirculation Control glass, select Defrost mode and adjust blower speed if needed. When outside air contains smoke, odors, or high humidity, or if rapid cooling is desired, MAX A/C you may wish to recirculate interior air by MAX A/C sets the control for maximum cooling perfor-...
Page 412 410 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: In cold weather, use of Recirculation mode may 2. Next, adjust the temperature you would like the lead to excessive window fogging. The recirculation system to maintain by adjusting the driver and pas- feature may be unavailable (soft button greyed out) if senger temperature buttons on the touchscreen or conditions exist that could create fogging on the inside of buttons on the faceplate.

Page 413: Rear Automatic Temperature Control (Atc) - If Equipped

Page 414 412 UNDERSTANDING YOUR INSTRUMENT PANEL Uconnect 4.3 Automatic Rear Climate Buttons On The Uconnect 8.4 Automatic Rear Climate Buttons On The Touchscreen Touchscreen 1 — Blower Up Button 5 — Done Button 1 — Rear Auto Button 6 — Blower Up Button 2 —...
Page 415 UNDERSTANDING YOUR INSTRUMENT PANEL 413 Controlling The Rear Climate Controls From The Rear second row occupants can only adjust the rear ATC Front ATC Panel control when the Rear Temperature Lock button is turned off. The Three-Zone ATC system allows for adjustment of the rear climate controls from the front ATC panel.
Page 416 414 UNDERSTANDING YOUR INSTRUMENT PANEL level, it is not necessary to change the settings. You will experience the greatest efficiency by simply allowing the system to function automatically. NOTE: It is not necessary to move the temperature settings for cold or hot vehicles. The system automati- cally adjusts the temperature, mode and fan speed to provide comfort as quickly as possible.
Page 417 UNDERSTANDING YOUR INSTRUMENT PANEL 415 to high. This allows the rear seat occupants to control the the temperature, and clockwise to increase the tempera- volume of air circulated in the rear of the vehicle. ture. The rear temperature settings are displayed in the Uconnect system.
Page 418 416 UNDERSTANDING YOUR INSTRUMENT PANEL Bi-Level Mode A solution of 50% OAT (Organic Additive Technology) coolant that meets the requirements of FCA Material Air comes from both the headliner outlets and the Standard MS.90032 and 50% water is recommended. floor outlets. Refer to “Maintenance Procedures”...
Page 419 UNDERSTANDING YOUR INSTRUMENT PANEL 417 Window Fogging Outside Air Intake Interior fogging on the windshield can be quickly re- Make sure the air intake, located directly in front of the moved by turning the mode selector to Defrost. The windshield, is free of obstructions such as leaves. Leaves Defrost/Floor mode can be used to maintain a clear collected in the air intake may reduce airflow, and if they windshield and provide sufficient heating.
Page 420 418 UNDERSTANDING YOUR INSTRUMENT PANEL Manual Control Setting Suggestions For Various Weather Conditions...
Page 421 STARTING AND OPERATING CONTENTS ▫ Key Ignition Park Interlock....431 STARTING PROCEDURES ....424 ▫...
Page 422 420 STARTING AND OPERATING ▫ Traction ......442 ▫ Brake Assist System (BAS) ....453 ▫...
Page 423 STARTING AND OPERATING 421 ▫ Tire Pressure ......475 TIRE PRESSURE MONITOR SYSTEM (TPMS) . .490 ▫ Tire Inflation Pressures ....476 ▫...
Page 424 422 STARTING AND OPERATING ▫ E-85 General Information ....502 ▫ Vehicle Certification Label ....508 ▫...
Page 425 STARTING AND OPERATING 423 ▫ Towing This Vehicle Behind Another RECREATIONAL TOWING (BEHIND MOTORHOME, ETC.) ....523 Vehicle ......523...

Page 426: Starting Procedures

Page 427: keyless enter-n-go.

Page 428 426 STARTING AND OPERATING 4. If you wish to stop the cranking of the engine prior to position. If the shift lever/gear selector is not in PARK the engine starting, push the button again. and the ENGINE START/STOP button is pushed once, the EVIC (if equipped) will display a “Vehicle NOTE: Normal starting of either a cold or a warm engine Not In Park”...

Page 429: Extreme Cold Weather (Below -22°F Or −30°C)

Page 430 428 STARTING AND OPERATING Clearing A Flooded Engine (Using ENGINE WARNING! (Continued) START/STOP Button) • Do not attempt to push or tow your vehicle to get it If the engine fails to start after you have followed the started. Vehicles equipped with an automatic trans- “Normal Starting”...

Page 431: After Starting

Page 432 430 STARTING AND OPERATING WARNING! (Continued) WARNING! (Continued) • Unintended movement of a vehicle could injure • Never leave children alone in a vehicle, or with those in or near the vehicle. As with all vehicles, access to an unlocked vehicle. Allowing children to you should never exit a vehicle while the engine is be in a vehicle unattended is dangerous for a running.

Page 433: Key Ignition Park Interlock

Page 434 432 STARTING AND OPERATING out of PARK (refer to “Brake/Transmission Shift Inter- (-/+) position (below the Drive position) activates lock System” in this section). To drive, move the shift Autostick mode, providing manual shift control and lever from PARK or NEUTRAL to the DRIVE position. displaying the current gear in the instrument cluster.

Page 435: Gear Ranges

Page 436 434 STARTING AND OPERATING WARNING! (Continued) WARNING! (Continued) • It is dangerous to shift out of PARK or NEUTRAL or the manual transmission into REVERSE. Always if the engine speed is higher than idle speed. If make sure the keyless ignition node is in the “OFF” your foot is not firmly pressing the brake pedal, the mode, remove the Key Fob from the vehicle and vehicle could accelerate quickly forward or in re-...
Page 437 STARTING AND OPERATING 435 • When shifting into PARK, firmly move the shift lever WARNING! (Continued) all the way forward and to the left until it stops and is leave the ignition in the ACC or ON/RUN mode. A fully seated. child could operate power windows, other controls, •...
Page 438 436 STARTING AND OPERATING DRIVE (D) WARNING! This range should be used for most city and highway Do not coast in NEUTRAL and never turn off the driving. It provides the smoothest upshifts and down- ignition to coast down a hill. These are unsafe shifts, and the best fuel economy.
Page 439 STARTING AND OPERATING 437 transmission shift schedule and expand the range of Transmission Limp Home Mode torque converter clutch engagement. This is done to Transmission function is monitored electronically for prevent transmission damage due to overheating. abnormal conditions. If a condition is detected that could result in transmission damage, Transmission Limp Home During cold temperatures, transmission operation may Mode is activated.
Page 440 438 STARTING AND OPERATING 3. Turn the ignition switch to the OFF position. Overdrive Operation The automatic transmission includes an electronically 4. Wait approximately 10 seconds. controlled Overdrive (top gear). The transmission will 5. Restart the engine. automatically shift into Overdrive if the following con- ditions are present: 6.

Page 441: Autostick

Page 442 440 STARTING AND OPERATING • The transmission will automatically upshift when nec- • Transmission shifting will be more noticeable when essary to prevent engine over-speed. AutoStick is engaged. • The transmission will automatically downshift as the • The system may revert to automatic shift mode if a vehicle slows (to prevent engine lugging) and will fault or overheat condition is detected.

Page 443: All Wheel Drive (Awd) - If Equipped

Page 444: traction, page 445: flowing/rising water, page 446: power steering, page 447: power steering fluid check, page 448: parking brake.

Page 449 STARTING AND OPERATING 447 NOTE: • When the parking brake is applied and the transmis- sion is placed in gear, the “Brake Warning Light” will flash. If vehicle speed is detected, a chime will sound to alert the driver. Fully release the parking brake before attempting to move the vehicle.
Page 450 448 STARTING AND OPERATING WARNING! WARNING! (Continued) • Be sure the parking brake is fully disengaged • Never use the PARK position as a substitute for the before driving; failure to do so can lead to brake parking brake. Always apply the parking brake failure and a collision.

Page 451: Brake System

Page 452: electronic brake control system.

Page 453 STARTING AND OPERATING 451 • A slight drop of the brake pedal at the end of the stop. braking conditions. The system automatically prevents wheel lock, and enhances vehicle control during braking. These are all normal characteristics of ABS. The ABS performs a self-check cycle to ensure that the ABS is working properly each time the vehicle is started WARNING! and driven.

Page 454: Anti-Lock Brake Warning Light

Page 455: brake assist system (bas).

Page 456 454 STARTING AND OPERATING does not apply the throttle before this time expires, the is in PARK or NEUTRAL. For vehicles equipped with system will release brake pressure and the vehicle will a manual transmission if the clutch is pressed HSA will roll down the hill as normal.
Page 457 STARTING AND OPERATING 455 Towing With HSA WARNING! (Continued) HSA will also provide assistance to mitigate roll back • Failure to follow these warnings can result in a while towing a trailer. collision or serious personal injury. WARNING! Disabling And Enabling HSA •...

Page 458: Traction Control System (Tcs)

Page 459: electronic stability control (esc).

Page 460 458 STARTING AND OPERATING WARNING! (Continued) WARNING! (Continued) ESC performance. Improperly inflated and un- accidents, including those resulting from excessive evenly worn tires may also degrade ESC perfor- speed in turns, driving on very slippery surfaces, or hydroplaning. ESC also cannot prevent accidents mance.
Page 461 STARTING AND OPERATING 459 Partial Off NOTE: • When in “Partial Off” mode, the TCS functionality of The “Partial Off” mode is intended for times when a more spirited driving experience is desired. This mode ESC, (except for the limited slip feature described in may modify TCS and ESC thresholds for activation, the TCS section), has been disabled and the “ESC Off which allows for more wheel spin than normally al-...
Page 462 460 STARTING AND OPERATING speeds greater than 30 mph (48 km/h), see your autho- WARNING! (Continued) rized dealer as soon as possible to have the problem accidents, including those resulting from excessive diagnosed and corrected. speed in turns, driving on very slippery surfaces, or The “ESC Activation/Malfunction Indicator Light”...

Page 463: Trailer Sway Control (Tsc)

Page 464: electronic roll mitigation (erm), page 465: tire safety information.

Page 466 464 STARTING AND OPERATING NOTE: tires is the same as for P-Metric tires except for the letters “LT” that are molded into the sidewall preced- • P (Passenger) — Metric tire sizing is based on U.S. ing the size designation. Example: LT235/85R16. design standards.
Page 467 STARTING AND OPERATING 465 Tire Sizing Chart EXAMPLE: Example Size Designation: P215/65R15XL 95H, 215/65R15 96H, LT235/85R16C, T145/80D18 103M, 31x10.5 R15 LT P = Passenger car tire size based on U.S. design standards, or ..blank..= Passenger car tire based on European design standards, or LT = Light truck tire based on U.S.
Page 468 466 STARTING AND OPERATING EXAMPLE: Service Description: 95 = Load Index – A numerical code associated with the maximum load a tire can carry H = Speed Symbol – A symbol indicating the range of speeds at which a tire can carry a load corresponding to its load index under certain operating conditions –...

Page 469: Tire Identification Number (Tin)

Page 470: tire terminology and definitions.

Page 471 STARTING AND OPERATING 469 Term Definition Maximum Inflation Pressure The maximum inflation pressure is the maximum permissible cold tire inflation pressure for this tire. The maximum inflation pressure is molded into the sidewall. Recommended Cold Tire Inflation Pres- Vehicle manufacturer’s recommended cold tire inflation pressure sure as shown on the tire placard.

Page 472: Tire Loading And Tire Pressure

Page 473 STARTING AND OPERATING 471 Tire And Loading Information Placard Example Tire Placard Location (B-Pillar) Tire And Loading Information Placard This placard tells you important information about the: 1. Number of people that can be carried in the vehicle. 2. Total weight your vehicle can carry.
Page 474 472 STARTING AND OPERATING 3. Tire size designed for your vehicle. To determine the maximum loading conditions of your vehicle, locate the statement “The combined weight of 4. Cold tire inflation pressures for the front, rear, and occupants and cargo should never exceed XXX lbs or spare tires.
Page 475 STARTING AND OPERATING 473 4. The resulting figure equals the available amount of NOTE: cargo and luggage load capacity. For example, if • If your vehicle will be towing a trailer, load from your “XXX” amount equals 1,400 lbs (635 kg) and there will trailer will be transferred to your vehicle.
Page 476 474 STARTING AND OPERATING...

Page 477: Tires - General Information

Page 478: tire inflation pressures.

Page 479 STARTING AND OPERATING 477 At least once a month: mile (1.6 km) after sitting for a minimum of three hours. The cold tire inflation pressure must not exceed the • Check and adjust tire pressure with a good quality maximum inflation pressure molded into the tire side- pocket-type pressure gauge.

Page 480: Tire Pressures For High Speed Operation

Page 481: tire types.

Page 482 480 STARTING AND OPERATING Summer tires do not contain the all season designation or Snow Tires mountain/snowflake symbol on the tire sidewall. Use Some areas of the country require the use of snow tires Summer tires only in sets of four; failure to do so may during the Winter.

Page 483: Run Flat Tires - If Equipped

Page 484 482 STARTING AND OPERATING Spare Tire Matching Original Equipped Tire And T, S = Temporary Spare Tire Wheel — If Equipped Since this tire has limited tread life, the original equip- Your vehicle may be equipped with a spare tire and ment tire should be repaired (or replaced) and reinstalled wheel equivalent in look and function to the original on your vehicle at the first opportunity.
Page 485 STARTING AND OPERATING 483 limited-use spare wheel. This label contains the driving WARNING! (Continued) limitations for this spare. This tire may look like the replaced. Be sure to follow the warnings, which original equipped tire on the front or rear axle of your apply to your spare.

Page 486: Tire Spinning

Page 487: life of tire, page 488: replacement tires.

Page 489 STARTING AND OPERATING 487 you may have on tire specifications or capability. Failure WARNING! (Continued) to use equivalent replacement tires may adversely affect • Never use a tire with a smaller load index or the safety, handling, and ride of your vehicle. capacity, other than what was originally equipped on your vehicle.

Page 490: Tire Chains (Traction Devices)

Page 491: tire rotation recommendations, page 492: tire pressure monitor system (tpms).

Page 493 STARTING AND OPERATING 491 The TPMS will continue to warn the driver of low tire For example, your vehicle may have a recommended cold pressure as long as the condition exists, and will not turn (parked for more than three hours) placard pressure of 33 off until the tire pressure is at or above the recommended psi (227 kPa).
Page 494 492 STARTING AND OPERATING NOTE: CAUTION! (Continued) • The TPMS is not intended to replace normal tire care warnings have been established for the tire size and maintenance, or to provide warning of a tire equipped on your vehicle. Undesirable system op- failure or condition.

Page 495: Premium System

Page 496 494 STARTING AND OPERATING • Various Tire Pressure Monitoring System messages, which display in the Electronic Vehicle Information Center (EVIC) • Tire Pressure Monitoring Telltale Light Tire Pressure Monitoring Low Pressure Warnings The “Tire Pressure Monitoring Telltale Light” will illuminate in the instrument cluster and a chime will sound when tire pressure is low in one or more of the four active road tires.
Page 497 STARTING AND OPERATING 495 update, the graphic display in the EVIC will change color seconds and then display dashes (- -) in place of the back to the original color, and the “Tire Pressure Moni- pressure value to indicate which sensor is not being toring Telltale Light”...
Page 498 496 STARTING AND OPERATING • If you install the compact spare tire in place of a road 4. Using tire chains on the vehicle. tire that has a pressure below the low-pressure warn- 5. Using wheels/tires not equipped with TPMS sensors. ing limit, upon the next ignition switch cycle, the “Tire The EVIC will also display a SERVICE TPM SYSTEM Pressure Monitoring Telltale Light”...

Page 499: General Information

Page 500: fuel requirements, page 501: gasoline/oxygenate blends, page 502: mmt in gasoline, page 503: fuel system cautions, page 504: carbon monoxide warnings, page 505: ethanol fuel (e-85), page 506: selection of engine oil for flexible fuel vehicles (e-85) and gasoline vehicles, page 507: cruising range.

Page 508 506 STARTING AND OPERATING WARNING! • Never have any smoking materials lit in or near the vehicle when the gas cap is removed or the tank is being filled. • Never add fuel to the vehicle when the engine is running.

Page 509: Loose Fuel Filler Cap Message

Page 510: vehicle loading, page 511: overloading, page 512: trailer towing.

Page 513 STARTING AND OPERATING 511 Gross Axle Weight Rating (GAWR) is 10% to 15% of the vehicle’s GTW for a conventional hitch. You must consider this as part of the load on your The GAWR is the maximum capacity of the front and rear vehicle.

Page 514: Trailer Hitch Classification

Page 515 STARTING AND OPERATING 513 Trailer Hitch Classification Definitions Class Max. Trailer Hitch Industry Standards Class I - Light Duty 2,000 lbs (907 kg) Class II - Medium Duty 3,500 lbs (1 587 kg) Class III - Heavy Duty 5,000 lbs (2 268 kg) Class IV - Extra Heavy Duty 10,000 lbs (4 540 kg) Refer to the “Trailer Towing Weights (Maximum Trailer Weight Ratings)”...

Page 516: Trailer Towing Weights (Maximum Trailer Weight Ratings)

Page 517: trailer and tongue weight, page 518: towing requirements.

Page 519 STARTING AND OPERATING 517 information. When towing a trailer, never exceed the WARNING! (Continued) GAWR, or GCWR, ratings. • When hauling cargo or towing a trailer, do not overload your vehicle or trailer. Overloading can WARNING! cause a loss of control, poor performance, or dam- Improper towing can lead to a collision.
Page 520 518 STARTING AND OPERATING “Tires – General Information” in “Starting And Oper- WARNING! (Continued) ating” for proper tire inflation procedures. • Total weight must be distributed between the tow • Check the trailer tires for proper tire inflation pres- vehicle and the trailer such that the following four sures before trailer usage.
Page 521 STARTING AND OPERATING 519 Towing Requirements — Trailer Brakes WARNING! • Do not interconnect the hydraulic brake system or • Do not connect trailer brakes to your vehicle’s vacuum system of your vehicle with that of the trailer. hydraulic brake lines. It can overload your brake This could cause inadequate braking and possible system and cause it to fail.
Page 522 520 STARTING AND OPERATING CAUTION! (Continued) could lead to accelerated brake lining wear, higher brake pedal effort, and longer stopping distances. Towing Requirements — Trailer Lights And Wiring Whenever you pull a trailer, regardless of the trailer size, stoplights and turn signals on the trailer are required for motoring safety.

Page 523: Towing Tips

Page 524 522 STARTING AND OPERATING or frequent trailer towing”. Refer to the “Maintenance AutoStick Schedule” for the proper maintenance intervals. • When using the AutoStick shift control, select the NOTE: Check the four-speed automatic transmission highest gear that allows for adequate performance and fluid level before towing.
Page 525 STARTING AND OPERATING 523 Cooling System Highway Driving To reduce potential for engine and transmission over- Reduce speed. heating, take the following actions: Air Conditioning City Driving Turn off temporarily. When stopped for short periods, shift the transmission into NEUTRAL and increase engine idle speed. RECREATIONAL TOWING (BEHIND MOTORHOME, ETC.) Towing This Vehicle Behind Another Vehicle Towing Condition...
Page 526 524 STARTING AND OPERATING Recreational Towing — Front-Wheel Drive (FWD) CAUTION! Models • DO NOT flat tow this vehicle. Damage to the Recreational towing is allowed ONLY if the front wheels drivetrain will result. If this vehicle requires tow- are OFF the ground. This may be accomplished using a ing, make sure the drive wheels are OFF the tow dolly or vehicle trailer.
Page 527 STARTING AND OPERATING 525 Recreational Towing — All-Wheel Drive (AWD) CAUTION! Models Towing this vehicle with ANY of its wheels on the Recreational towing (with all four wheels on the ground, ground can cause severe transmission and/or power or using a towing dolly) is NOT ALLOWED. The only transfer unit damage.
Page 529 WHAT TO DO IN EMERGENCIES CONTENTS ▫ Spare Tire Removal ....534 HAZARD WARNING FLASHERS ...529 ▫...
Page 530 528 WHAT TO DO IN EMERGENCIES ▫ Front-Wheel Drive (FWD) Models ..555 TOWING A DISABLED VEHICLE ...552 ▫ All-Wheel Drive (AWD) Models ...554...

Page 531: Hazard Warning Flashers

Page 532: 2.4l engine - if equipped, page 533: torque specifications, page 534: jacking and tire changing, page 535: jack location, page 536: preparations for jacking.

Page 537 WHAT TO DO IN EMERGENCIES 535 NOTE: Assemble components 2 and 3 by seating the small ball at the end of component 2 in the small hole at the end of component 3. This will lock these components together. Assemble components 1 and 2 so that the wheel nut socket at the end of component 1 faces upward when seated on component 2.

Page 538: Spare Tire Stowage

Page 539: jacking instructions.

Page 540 538 WHAT TO DO IN EMERGENCIES Jack Warning Label CAUTION! Do not attempt to raise the vehicle by jacking on locations other than those indicated in the Jacking Instructions for this vehicle. Jacking Locations 1. Remove the spare tire, jack, and jack-handle from stowage.
Page 541 WHAT TO DO IN EMERGENCIES 539 3. Place the jack in the notches underneath the lift area that is closest to the flat tire. Center the jack saddle between the drain flute formations on the sill flange. Turn the jack screw clockwise to firmly engage the jack saddle with the lift area of the sill flange.
Page 542 540 WHAT TO DO IN EMERGENCIES Rear Jacking Location Rear Jack Engaged With Jack Handle 4. Raise the vehicle by turning the jack screw clockwise with the jack handle. Raise the vehicle until the tire just clears the road surface and enough clearance is obtained to install the spare tire.
Page 543 WHAT TO DO IN EMERGENCIES 541 WARNING! CAUTION! Raising the vehicle higher than necessary can make Be sure to mount the spare tire with the valve stem the vehicle less stable. It could slip off the jack and facing outward. The vehicle could be damaged if the hurt someone near it.
Page 544 542 WHAT TO DO IN EMERGENCIES NOTE: 8. Lower the vehicle by turning the jack screw counter- clockwise with the jack handle. • For vehicles so equipped, do not attempt to install a center cap or wheel cover on the compact spare. 9.

Page 545: Road Tire Installation

Page 546 544 WHAT TO DO IN EMERGENCIES snapping the cover over the two lug nuts. Do not use a hammer or excessive force to install the cover. 4. Install the remaining lug nuts with the cone shaped end of the nut toward the wheel. Lightly tighten the lug nuts.
Page 547 WHAT TO DO IN EMERGENCIES 545 nut torque refer to Torque Specifications in this sec- WARNING! tion. If in doubt about the correct tightness, have them checked with a torque wrench by your authorized To avoid the risk of forcing the vehicle off the jack, dealer or service station.

Page 548: Jump-Starting

Page 549 WHAT TO DO IN EMERGENCIES 547 WARNING! • Take care to avoid the radiator cooling fan when- ever the hood is raised. It can start anytime the ignition switch is ON. You can be injured by moving fan blades. • Remove any metal jewelry such as rings, watch bands and bracelets that could make an inadvertent electrical contact.

Page 550: Jump-Starting Procedure

Page 551 WHAT TO DO IN EMERGENCIES 549 3. Connect the negative end (-) of the jumper cable to the 6. Once the engine is started, remove the jumper cables negative (-) post of the booster battery. in the reverse sequence: Disconnecting The Jumper Cables 4.

Page 552: Freeing A Stuck Vehicle

Page 553: shift lever override.

Page 554 552 WHAT TO DO IN EMERGENCIES 3. Open the center console and remove the shift lever 4. Push and maintain firm pressure on the brake pedal. override access cover (located in the front lower right 5. Insert a screwdriver or similar small tool into the corner of the console storage bin).
Page 555 WHAT TO DO IN EMERGENCIES 553 Towing Condition Wheel OFF the Ground FWD MODELS AWD MODELS Flat Tow NONE IF transmission is oper- NOT ALLOWED able: Wheel Lift Or Dolly Tow Rear NOT ALLOWED • Transmission in NEU- TRAL • 25 mph (40 km/h) max speed •...
Page 556 554 WHAT TO DO IN EMERGENCIES If the key fob is unavailable, or the vehicle’s battery is All-Wheel Drive (AWD) Models discharged, refer to “Shift Lever Override” in this section The manufacturer requires towing with all four wheels for instructions on shifting the transmission out of PARK OFF the ground.
Page 557 WHAT TO DO IN EMERGENCIES 555 Front-Wheel Drive (FWD) Models CAUTION! The manufacturer recommends towing your vehicle with Towing faster than 25 mph (40 km/h) or farther than all four wheels OFF the ground using a flatbed. 15 mi (24 km) with front wheels on the ground can If flatbed equipment is not available, and the transmis- cause severe transmission damage.
Page 559 MAINTAINING YOUR VEHICLE CONTENTS ▫ Engine Oil Filter ..... .568 ENGINE COMPARTMENT — 2.4L ..559 ▫...
Page 560 558 MAINTAINING YOUR VEHICLE ▫ Brake System ......585 REPLACEMENT BULBS ....606 ▫...

Page 561: Engine Compartment - 2.4L

Page 562: engine compartment - 3.6l, page 563: onboard diagnostic system - obd ii, page 564: emissions inspection and maintenance programs, page 565: replacement parts, page 566: maintenance procedures, page 567: engine oil.

Page 568 566 MAINTAINING YOUR VEHICLE Change Engine Oil American Petroleum Institute (API) Engine Oil Identification Symbol The oil change indicator system will remind you that it is time to take your vehicle in for scheduled maintenance. Refer to the “Maintenance Schedule” for further informa- This symbol means that the oil has tion.
Page 569 MAINTAINING YOUR VEHICLE 567 Engine Oil Viscosity — 2.4L Engine equivalent is recommended for all operating tempera- tures. This engine oil improves low temperature starting MOPAR SAE 5W-20 engine oil or equivalent Pennzoil or and vehicle fuel economy. Shell Helix is recommended for all operating tempera- tures.

Page 570: Engine Oil Filter

Page 571: engine air cleaner filter.

Page 572 570 MAINTAINING YOUR VEHICLE To access the battery, turn the steering wheel fully to the WARNING! (Continued) right and remove the access panel from the inner fender • Battery posts, terminals, and related accessories shield. contain lead and lead compounds. Wash hands after handling.

Page 573: Air Conditioner Maintenance

Page 574: a/c air filter - if equipped, page 575: body lubrication, page 576: windshield wiper blades.

Page 577 MAINTAINING YOUR VEHICLE 575 3. Grab the bottom of the wiper blade and rotate it forward to unsnap the blade pivot pin from the wiper blade holder. 1 — Wiper Arm 2 — Pivot Cap NOTE: The rear wiper arm cannot be raised fully up- 1 —...

Page 578: Adding Washer Fluid

Page 579: exhaust system.

Page 580 578 MAINTAINING YOUR VEHICLE Under normal operating conditions, the catalytic con- CAUTION! verter will not require maintenance. However, it is im- • The catalytic converter requires the use of un- portant to keep the engine properly tuned to assure proper catalyst operation and prevent possible catalyst leaded fuel only.

Page 581: Cooling System

Page 582 580 MAINTAINING YOUR VEHICLE applicable). If the engine coolant (antifreeze) is dirty or If the engine coolant (antifreeze) is dirty or contains rusty in appearance, the system should be drained, visible sediment, have an authorized dealer clean and flushed, and refilled with fresh engine coolant (anti- flush with OAT coolant (antifreeze) (conforming to freeze).
Page 583 MAINTAINING YOUR VEHICLE 581 CAUTION! (Continued) CAUTION! (Continued) • This vehicle has not been designed for use with Organic Additive Technology (OAT) engine cool- propylene glycol-based engine coolant (antifreeze). ant is different and should not be mixed with Use of propylene glycol-based engine coolant (an- Hybrid Organic Additive Technology (HOAT) en- tifreeze) is not recommended.
Page 584 582 MAINTAINING YOUR VEHICLE that meets the requirements of FCA Material Standard Please note that it is the owner’s responsibility to main- MS.90032. When adding engine coolant (antifreeze): tain the proper level of protection against freezing ac- cording to the temperatures occurring in the area where •...
Page 585 MAINTAINING YOUR VEHICLE 583 Cooling System Pressure Cap WARNING! (Continued) The cap must be fully tightened to prevent loss of engine pressure cap while the system is hot or under coolant (antifreeze), and to ensure that engine coolant pressure. (antifreeze) will return to the radiator from the coolant •...
Page 586 584 MAINTAINING YOUR VEHICLE Coolant Level additional engine coolant (antifreeze) is needed to main- tain the proper level, it should be added to the coolant 2.4L Engine — The coolant bottle provides a quick visual bottle. Do not overfill. method for determining that the coolant level is ad- equate.

Page 587: Brake System

Page 588 586 MAINTAINING YOUR VEHICLE Fluid level can be expected to fall as the brake pads wear. WARNING! (Continued) Brake fluid level should be checked when pads are high brake temperatures, excessive lining wear, and replaced. However, low fluid level may be caused by a possible brake damage.

Page 589: Automatic Transmission

Page 590 588 MAINTAINING YOUR VEHICLE CAUTION! CAUTION! Using a transmission fluid other than the manufac- Do not use chemical flushes in your transmission as turer’s recommended fluid may cause deterioration the chemicals can damage your transmission compo- in transmission shift quality and/or torque converter nents.
Page 591 MAINTAINING YOUR VEHICLE 589 4. Place the shift lever momentarily into each gear posi- 7. Wipe the dipstick clean and reinsert it until seated. tion (allowing time for the transmission to fully en- Then, remove the dipstick and note the fluid level on gage in each position), ending with the transmission in both sides.
Page 592 590 MAINTAINING YOUR VEHICLE NOTE: If it is necessary to check the transmission below CAUTION! the operating temperature, the fluid level should be • Using a transmission fluid other than the manufac- between the two COLD (lower) holes on the dipstick with the fluid at approximately 80°F (27°C).

Page 593: Rear Drive Assembly (Rda) - Awd Models Only

Page 594: power transfer unit (ptu) - awd models only.

Page 595 MAINTAINING YOUR VEHICLE 593 The following maintenance recommendations will enable Washing you to obtain maximum benefit from the corrosion • Wash your vehicle regularly. Always wash your ve- resistance built into your vehicle. hicle in the shade using MOPAR Car Wash, or a mild car wash soap, and rinse the panels completely with What Causes Corrosion? clear water.
Page 596 594 MAINTAINING YOUR VEHICLE • If you detect any stone chips or scratches in the paint, CAUTION! touch them up immediately. The cost of such repairs is • Do not use abrasive or strong cleaning materials considered the responsibility of the owner. such as steel wool or scouring powder that will •...
Page 597 MAINTAINING YOUR VEHICLE 595 Wheel And Wheel Trim Care CAUTION! • All wheels and wheel trim, especially aluminum and Do not use scouring pads, steel wool, a bristle brush, chrome plated wheels, should be cleaned regularly or metal polishes. Do not use oven cleaner. These with a mild soap and water to prevent corrosion.
Page 598 596 MAINTAINING YOUR VEHICLE • For tough stains, apply MOPAR Total Clean, or a mild can act as an abrasive and damage the leather upholstery soap solution to a clean, damp cloth and remove stain. and should be removed promptly with a damp cloth. Use a fresh, damp towel to remove soap residue.
Page 599 MAINTAINING YOUR VEHICLE 597 Cleaning Headlights CAUTION! Your vehicle is equipped with plastic headlights and fog Direct contact of air fresheners, insect repellents, lights that are lighter and less susceptible to stone break- suntan lotions, or hand sanitizers to the plastic, age than glass headlights.
Page 600 598 MAINTAINING YOUR VEHICLE cleaner. Use caution when cleaning the inside rear win- Seat Belt Maintenance dow equipped with electric defrosters or windows Do not bleach, dye, or clean the belts with chemical equipped with radio antennas. Do not use scrapers or solvents or abrasive cleaners.

Page 601: Cleaning The Cupholders

Page 602 600 MAINTAINING YOUR VEHICLE Cavity Cartridge Fuse Mini-Fuse Description F100 30 Amp Pink – 110V AC Inverter – If Equipped F101 – 10 Amp Red Interior Lights F102 – 20 Amp Yellow Cigar Lighter in Instrument Panel/Left Rear Power Outlet F103 –...
Page 603 MAINTAINING YOUR VEHICLE 601 Cavity Cartridge Fuse Mini-Fuse Description F116 30 Amp Pink – Rear Defroster (EBL) F117 – 10 Amp Red Heated Mirrors F118 – 10 Amp Red Occupant Restraint Controller F119 – 10 Amp Red Steering Column Control Module F120 –...

Page 604: Underhood Fuses (Power Distribution Center)

Page 605 MAINTAINING YOUR VEHICLE 603 Cavity Cartridge Fuse Mini-Fuse Description F101 60 Amp Yellow – Interior Power Distribution Center Rail F102 60 Amp Yellow – Interior Power Distribution Center Rail F103 60 Amp Yellow – Interior Power Distribution Center Rail F105 60 Amp Yellow –...
Page 606 604 MAINTAINING YOUR VEHICLE Cavity Cartridge Fuse Mini-Fuse Description F147 30 Amp Pink – Spare F148 40 Amp Green – Radiator Fan Motor F149 30 Amp Pink – Starter Solenoid F150 – 25 Amp Clear Powertrain Control Modules F151 30 Amp Pink –...
Page 607 MAINTAINING YOUR VEHICLE 605 Cavity Cartridge Fuse Mini-Fuse Description F163 50 Amp Red – Cabin Heater #2 – If Equipped F164 – 25 Amp Clear Powertrain Auto Shutdown F165 – 20 Amp Yellow Powertrain Shutdown F166 – 20 Amp Yellow Spare F167 –...

Page 608: Replacement Bulbs

Page 609 MAINTAINING YOUR VEHICLE 607 Exterior Bulbs Bulb Number Low Beam Headlamp 9006 High Beam Headlamp 9005 Front Park/Turn Signal 3757AK Side Marker Lamp Front Fog Lamp PSX24W or 2504 Center High Mounted Stop Lamp (CHMSL) LED (Serviced at Authorized Dealer) License Lamp Exterior Bulbs –...

Page 610: Bulb Replacement

Page 611: front fog lamp, page 612: rear turn signal and backup lamp.

Page 613 MAINTAINING YOUR VEHICLE 611 Changing The Rear Turn Signal Lamp 3. Carefully insert a trim stick (plastic flat-blade tool) between the body panel and the outboard side of the 1. Open the liftgate. tail lamp housing with one hand and grasp the flange 2.
Page 614 612 MAINTAINING YOUR VEHICLE Changing The Backup Lamp 3. Carefully insert a trim stick (plastic flat-blade tool) between the tail lamp housing and the liftgate. Use the 1. Open the liftgate. trim stick and hand pressure together to disengage the 2.

Page 615: License Plate Lamp

Page 616: fluid capacities.

Page 617 MAINTAINING YOUR VEHICLE 615 U.S. Metric Cooling System* 2.4L Engine and Single or Dual-Zone Climate Control System 10.7 Quarts 10.1 Liters (MOPAR Antifreeze/Engine Coolant 10 Year/150,000 Mile For- mula) 2.4L Engine and Three-Zone Climate Control System (MOPAR 11.6 Quarts 11 Liters Antifreeze/Engine Coolant 10 Year/150,000 Mile Formula) 3.6L Engine and Single or Dual-Zone Climate Control System 13.1 Quarts...

Page 618: Fluids, Lubricants, And Genuine Parts

Page 619 MAINTAINING YOUR VEHICLE 617 CAUTION! CAUTION! (Continued) • Do not use water alone or alcohol-based engine • Mixing of engine coolant (antifreeze) other than coolant (antifreeze) products. Do not use additional specified Organic Additive Technology (OAT) en- rust inhibitors or antirust products, as they may not gine coolant (antifreeze), may result in engine be compatible with the radiator engine coolant and damage and may decrease corrosion protection.

Page 620: Chassis

Page 621: maintenance schedules.

Page 622 620 MAINTENANCE SCHEDULES MAINTENANCE SCHEDULE scheduled oil change is performed by someone other than your authorized dealer, the message can be reset by Your vehicle is equipped with an automatic oil change referring to the steps described under “Electronic Vehicle indicator system.
Page 623 MAINTENANCE SCHEDULES 621 Once A Month Or Before A Long Trip: At Every Oil Change Interval As Indicated By Oil • Check engine oil level. Change Indicator System: • Change oil and filter. • Check windshield washer fluid level. • Rotate the tires. Rotate at the first sign of irregu- •...
Page 624 622 MAINTENANCE SCHEDULES Maintenance Chart Refer to the Maintenance Schedules on the following pages for the required maintenance intervals. Mileage or time passed (whichever comes first) Or Years: Or Kilometers: Additional Inspections Inspect the CV joints. Inspect front suspension, tie rod ends, and replace if necessary.
Page 625 MAINTENANCE SCHEDULES 623 Mileage or time passed (whichever comes first) Or Years: Or Kilometers: Additional Maintenance Replace engine air filter. Replace air conditioning filter. Replace spark plugs (2.4L En- gine). ** Replace spark plugs (3.6L En- gine). ** Flush and replace the engine coolant at 10 years or 150,000 miles (240,000 km) whichever comes first.
Page 626 624 MAINTENANCE SCHEDULES Mileage or time passed (whichever comes first) Or Years: Or Kilometers: Change the automatic transmis- sion fluid and filter. Change the automatic transmis- sion fluid and filter if using your vehicle for any of the following: police, taxi, fleet, or frequent trailer towing.
Page 627 MAINTENANCE SCHEDULES 625 ** The spark plug change interval is mileage based only, yearly intervals do not apply. WARNING! • You can be badly injured working on or around a motor vehicle. Do only service work for which you have the knowledge and the right equipment. If you have any doubt about your ability to perform a service job, take your vehicle to a competent me- chanic.
Page 629 IF YOU NEED CONSUMER ASSISTANCE CONTENTS ▫ Customer Assistance For The Hearing Or SUGGESTIONS FOR OBTAINING SERVICE FOR YOUR VEHICLE ..... . .629 Speech Impaired (TDD/TTY) .
Page 630 628 IF YOU NEED CONSUMER ASSISTANCE ▫ Traction Grades ..... . .635 DEPARTMENT OF TRANSPORTATION UNIFORM TIRE QUALITY GRADES ....635 ▫...

Page 631: Suggestions For Obtaining Service For Your Vehicle

Page 632: fca us llc customer center, page 633: in mexico contact.

Page 634 632 IF YOU NEED CONSUMER ASSISTANCE Warranty expires. The manufacturer stands behind only We appreciate that you have made a major investment the manufacturer’s service contracts. If you purchased a when you purchased the vehicle. An authorized dealer manufacturer’s service contract, you will receive Plan has also made a major investment in facilities, tools, and Provisions and an Owner Identification Card in the mail training to assure that you are absolutely delighted with...

Page 635: Warranty Information

Page 636: publication order forms, page 637: department of transportation uniform tire quality grades, page 638: temperature grades.

Page 639 INDEX...
Page 640 638 INDEX About Your Brakes .....446, 449 Knee Impact Bolsters .....67 Adding Engine Coolant (Antifreeze) .
Page 641 INDEX 639 Alterations/Modifications, Vehicle ....7 Special Additives ..... . .588 Antifreeze (Engine Coolant).
Page 642 640 INDEX Body Mechanism Lubrication ....573 Caps, Filler B-Pillar Location ......470 Fuel .
Page 643 INDEX 641 Chains, Tire ......488 Seating Positions ......88 Changing A Flat Tire .
Page 644 642 INDEX Cooling System......579 Dealer Service......563 Adding Coolant (Antifreeze) .
Page 645 INDEX 643 Remote Keyless Entry (RKE) ....30 Electronic Throttle Control Warning Light ..311 Door Locks, Automatic ..... .32 Electronic Vehicle Information Center Door Opener, Garage.
Page 646 644 INDEX Compartment Identification ....560 Entry System, Illuminated ....21 Coolant (Antifreeze) .
Page 647 INDEX 645 Flexible Fuel Vehicles Fog Lights ......227, 609 Cruising Range ......505 Fog Light Service .
Page 648 646 INDEX Tank Capacity ......614 GVWR ....... . .508 Fuel, Flexible .
Page 649 INDEX 647 Heated Mirrors ......123 Instrument Panel Lens Cleaning ....598 Heater, Engine Block .
Page 650 648 INDEX Key-In Reminder ......14 Lights ......111, 224 Keyless Enter-N-Go .
Page 651 INDEX 649 High Beam ......229, 608 Service ......606, 608 High Beam/Low Beam Select .
Page 652 650 INDEX Luggage Rack (Roof Rack) ....290 Exterior Folding ......123 Lug Nuts .
Page 653 INDEX 651 Oil, Engine ......565, 616 Operating Precautions ..... .561 Capacity .
Page 654 652 INDEX Distribution Center (Fuses) ....602 Pretensioners Door Locks ......31 Seat Belts .
Page 655 INDEX 653 Rear Window Features .....288 Remote Starting Rear Wiper/Washer......288 Exit Remote Start Mode .
Page 656 654 INDEX Safety Checks Inside Vehicle ....109 Seat Belts ......48, 109 Safety Checks Outside Vehicle .
Page 657 INDEX 655 Rear Folding ..... . .213, 220 Snow Tires ......480 Reclining .
Page 658 656 INDEX Steering Taillights .......610 Column Controls ..... . .228 Telescoping Steering Column .
Page 659 INDEX 657 Pressure Monitor System (TPMS) ... .490 Guide .......514 Pressure Warning Light .
Page 660 658 INDEX Transmission Screen Activated Features ....22, 336 Automatic ......429, 587 Things You Should Know About Your Filter .
Page 661 INDEX 659 Making A Second Call While Current Call Is In Vanity Mirrors ......123 Progress .
Page 662 660 INDEX Water Windshield Washers ....231, 234 Driving Through ......442 Fluid .
Page 663 INSTALLATION OF RADIO TRANSMITTING EQUIPMENT Special design considerations are incorporated into this The antenna cable should be as short as practical and vehicle’s electronic system to provide immunity to radio routed away from the vehicle wiring when possible. Use frequency signals. Mobile two-way radios and telephone only fully shielded coaxial cable.

This manual is also suitable for:

Rename the bookmark, delete bookmark, delete from my manuals, upload manual.

Forum Listing
Marketplace
Advanced Search
Dodge Charger Models (2011 - Up)
Charger Problems/Assistance (2011 +)

SERVICE AWD Light - c147b code

Add to quote

2011 R/T Plus AWD with about 89000 miles. SERVICE AWD light has come on periodically and most recently last night after making a left-hand turn while using the auto stick. When the SERV AWD light comes on the AWD system does not work - rear-wheel drive only. When I turn the car off and restart the light is off and the system seems to reset - until the next event that triggers the SERV AWD light. Just had it in the shop last week for the same issue. The system had stored code c147b - front axle disconnect circuit. Techs at the shop were unable to duplicate the error while there after driving 15 miles with auto stick. They did check the associated wiring and connections and said everything looked ok. They cleared the code and then it came back on last night. I also had it come on once when I turned on the wipers in a rain storm. So the question is how do I fix this error code problem? Replace the sensor? Replace the drive train control module (DTCM)? And by the way - where the heck is the sensor and DTCM actually located? Is this something a DIY can do or does it need a flash of some kind? Not critical right now but want to fix the issue before winter. Any TSB related to this in Chargers? I found some references to RAM trucks with similar issues pre-2009. Coming up with little to no useful information after an Internet search. Anyone? Sent from AutoGuide.com Free App

SneakyRT said: 2011 R/T Plus AWD with about 89000 miles. SERVICE AWD light has come on periodically and most recently last night after making a left hand turn while using the auto stick. When the SERV AWD light comes on the AWD system does not work - rear wheel drive only. When I turn the car off and restart the light is off and the system seems to reset - until the next event that triggers the SERV AWD light. Just had it in the shop last week for same issue. System had stored code c147b - front axle disconnect circuit. Techs at the shop unable to duplicate the error while there after driving 15 miles with auto stick. They did check the associated wiring and connections and said everything looked ok. They cleared the code and then it came back on last night. I also had it come on once when I turned on the wipers in a rain storm. So the question is how do I fix this error code problem? Replace the sensor? Replace the drive train control module (DTCM)? And by the way - where the heck are the sensor and DTCM actually located? Is this something a DIY can do or does it need a flash of some kind? Not critical right now but want to fix the issue before winter. Any TSB related to this in Chargers? I found some references to RAM trucks with similar issues pre-2009. Coming up with little to no useful information after Internet search. Anyone? Sent from AutoGuide.com Free App Click to expand...

GROUP: Transmission and
Transfer Case
DATE: June 24, 2011
Flash: Service 4WD Light Illuminated With C1078 Stored
This bulletin involves flash reprogramming the Drive Train Control Module (DTCM) with new software.
2011 (LD) Charger
2011 (LX) 300
NOTE: This Service Bulletin applies to vehicles equipped with All Wheel Drive (sales code DKB).
Some customers may get a “Service 4WD” light in the Cabin Compartment Node (CCN). Upon further investigation the Technician may find that C1078 -Tire Revolutions Range Performance diagnostic trouble code (DTC) is set in the DTCM. This condition may occur when driving on a slippery road and the AWD system is monitoring for slipping wheels. Under these conditions the AWD system may incorrectly determining that one wheel is spinning too much. When the AWD system detects this, it shuts down the AWD capability for the remainder of the drive cycle. The system is overly sensitive to wheel slip and may set this DTC when no issue is present. The system was re-calibrated to allow more wheel slip before setting this DTC. This condition is not monitored when operating in 2WD mode. Updating the DTCM software will correct the conditions above."

Kori, Thanks, this seems related. My car has been into the dealer many times since that bulletin was released so I'm thinking that flash would have already been done at some point, except that I had not indicated this issue before. I have a note indicating the c147b but I'll have to ask them if the C1078 showed up in the stored DTCs. It wasn't mentioned to me. The bulletin describes conditions that seem to follow my situation right now. The description looks to be on target. Going by the shop tomorrow and will see what they pull up this time. Thank you. Closest I've seen to an explanation yet.

Great! I hope it helps! Keep me posted and let me know if you'd like me to follow up with the dealership as well. Kori Dodge Social Care Specialist

Update - Shop got the chance to read an active code for the "SERV AWD" light that came up on Wed. Still comes up as a c147b code - Front axle disconnect sensor circuit performance. Relay test, wires and related components checked and appear to be ok. Warning reset when I restarted the car. No DTC last two days but I haven't used the auto stick last 2 trips. I fully expect it will come up again next time I use the auto stick. Kori - No C1078 codes in the history.

Most recent update: Culprit seems to be the "front axle disconnect solenoid". Took multiple trips to shop to figure that out. So I guess I need one of these: ACTUATOR. Axle Locker. For your 2011 Dodge Charger R/T Part Number: 68052258AA Includes Axle Disconnect Actuator and Solenoid. Not sure I need the actuator - just the solenoid. Not sure if that comes separate or not.

SneakyRT said: Most recent update: Culprit seems to be the "front axle disconnect solenoid". Took multiple trips to shop to figure that out. So I guess I need one of these: ACTUATOR. Axle Locker. For your 2011 Dodge Charger R/T Part Number: 68052258AA Includes Axle Disconnect Actuator and Solenoid. Not sure I need the actuator - just the solenoid. Not sure if that comes separate or not. Click to expand...

Not sure I need the actuator - just the solenoid. Not sure if that comes separate or not. Click to expand...

Yup, that's it. Replaced on Friday. Part made by Warn. So far so good. No more SERV AWD light. After I got back home I received a Recall notice in the mail from the factory for the alternator diode malfunction - but no parts available........SMH

Did they have to flash anything with the replacement?? I have the new solenoid in my trunk but leery of them in the computer...I get 29 hwy and 22 city so awd isn't high on the priority list!!

From Googling around, looks like a $125-$150 part. I had wondered if the disconnect was on the T case end, or the axle end. Looks to me like it is at the differential, thereby disconnecting the driveshaft there. Don

Hey Sneaky RT, I’ve got the same service AWD light as you had. My charger’s currently in 2WD when it should be in AWD. Any ideas on how to fix?

Reign74 said: Hey Sneaky RT, I’ve got the same service AWD light as you had. My charger’s currently in 2WD when it should be in AWD. Any ideas on how to fix? Click to expand...

X 2 on the front axle disconnect (or actuator) being bad. Don

has anyone done this replacement themselves, curious if I can do it at home. I bought a scan tool that reads powertrain and abs codes, hoping it might throw a simple wheel sensor code, but I got nothing. Now im grasping at straws here, snow is coming, actually here. And I'm gonna replace my fluids this weekend and prolly try to replace the solenoid and actuator. Just hoping its something I can do. The dealership is all booked up for awhile, and they wont do scan work or other than oil changes and stuff on saturdays. But I work second shift so all I have is saturday and my charger is my only car.

Did you ever get an answer as to whether or not it is something you could do yourself? I think replacing the actuator would solve my problem too. Tia

Since nobody had ever replied with how easy/hard this is - I went checking before doing mine, and there's a 3 min youtube video that shows it. It's accessible and fairly easy to do

SneakyRT said: 2011 R/T Plus AWD with about 89000 miles. SERVICE AWD light has come on periodically and most recently last night after making a left-hand turn while using the auto stick. When the SERV AWD light comes on the AWD system does not work - rear-wheel drive only. When I turn the car off and restart the light is off and the system seems to reset - until the next event that triggers the SERV AWD light. Just had it in the shop last week for the same issue. The system had stored code c147b - front axle disconnect circuit. Techs at the shop were unable to duplicate the error while there after driving 15 miles with auto stick. They did check the associated wiring and connections and said everything looked ok. They cleared the code and then it came back on last night. I also had it come on once when I turned on the wipers in a rain storm. So the question is how do I fix this error code problem? Replace the sensor? Replace the drive train control module (DTCM)? And by the way - where the heck is the sensor and DTCM actually located? Is this something a DIY can do or does it need a flash of some kind? Not critical right now but want to fix the issue before winter. Any TSB related to this in Chargers? I found some references to RAM trucks with similar issues pre-2009. Coming up with little to no useful information after an Internet search. Anyone? Sent from AutoGuide.com Free App Click to expand...

?
105.8K members

Top Contributors this Month

Forum Listing
Marketplace
Advanced Search
Dodge Charger Forum - Performance and Mod Zone
All Wheel Drive Chargers

service awd light came on, need suggestions

Add to quote

Anyone know of any common awd light issues? I definatly am not going into awd while this light is one. Funny thng is, that I never had any issues with it. I was just coming home from the store one day, and used my paddle shifters to downshift to pull into my driveway. I havent used them much at all really, like not in the last 2 years. Then my service awd light came on, and has been on since. I tried reading the codes with my intune2, but it just says there are no codes. Has anyone else had this happen? I hope its simple fix, cant clear the code because my intune2 doesnt see a code.

I was plagued with intermitten service AWD light for a while, turned out to be the solenoid on the front diff was faulty

Small update on this. I bougth a scanner that can read abs codes and transmission codes hoping it might be a wheel speed sensor. But no codes, also checked the fuses and relay, all seems fine there. Next step is changing some fluids, doubt that will do anything, probably gonna have to buy and replace the actuator/ solenoid. If anyone else has some ideas to check first, it would be greatly appreciated. Just to mention too that when i have been shecking posts on the net about this, almost everyone states there serv awd light has came on off and on. Mine has never gone back off. It just came on one day and never went away, dont know if that makes a difference, but wanted to throw that out there.

99% of the time, it’s the front axle solenoid. Easy fix

That has to be replaced with the actuator right, one piece? And i can do that at home right, on some ramps?

Yea, solenoid/actuator... same part

Just replaced the actuator/solenoid. Real easy. But the service awd light is still on, and now when i put it in gear i get a message saying the vehicle is not in park. Wtf? Anyone know whats going on?

Did you ever get it figured out??

?
46.7K members

Top Contributors this Month

Remember me Not recommended on shared computers

Forgot your password?

Engine & Driveline

All Wheel Drive (AWD)

Dodge Journey AWD (All Wheel Drive) Discussion

Start new topic

151 topics in this forum

Recently Updated
Most Viewed
Most Replies

Driveshaft support bearing question

John/Horace

Rear differential?

Tagged with:

Rear wheel bearing change on awd

Ptu journey 2015, new cause for service awd light, abs and traction control light to come on 1 2.

65.1k views
Kubiackalpha
Engineerbasher
February 18

Differential vent

December 24, 2023

Transmission seems to be slipping.

December 10, 2023

Changed VC, problem still there - HELP!

14WhiteRTRallye
October 10, 2023

Interchange Transmission

2016 dodge journey 3.6l awd sxt
September 12, 2023

Front tires locking when taking turns

September 11, 2023

AWD Viscous Coupler

rear differential awd coupler vc
September 6, 2023

REAR DIFFERENTIAL BEARING REPLACEMENT

August 12, 2023

2018 Journey Rear End Is Shot

July 27, 2023

Broken transfer case

June 29, 2023

2009 dodge journey 3.5 Awd transfer case leaking 1 2

June 16, 2023

Cv shaft, what do I need?

cv shaft, half, axle
March 22, 2023

2012 Rear differential amount and type

March 3, 2023

Does AWD have a front differential or just PTU?

February 28, 2023

Service AWD, ABS, TC maybe transaxle?

February 25, 2023

replacing 2009 R/T Exhaust

February 14, 2023

Diagnosing and Repairing Binding Noise on Hard turns - Thumping noise on Upshift 1 2

12.9k views
February 2, 2023

Traction Control Light

November 12, 2022
November 8, 2022

Drive shaft/ carrier bearing

November 3, 2022

Popular Contributors

Most Contributions

Existing user? Sign In

More Forum Apps

Online Users
Leaderboard

|| Forum Activity ||

All Activity
Create New...

IMAGES

Service AWD system tc and ABS lights on
Dodge Journey Dashboard Warning Lights
Dodge Journey Dash Lights 5 Ways On How To Prepare For Dodge Journey
dodge journey check engine light reset
Dodge Journey Warning Lights
2016 Dodge Journey AWD SXT 4dr SUV

VIDEO

2009 Dodge Journey AWD, silver
2010 Dodge Journey AWD 4dr R/T 4 Door Sport Utility EDMONTON ALBERTA CANADA
2013 Dodge Journey AWD, Black
2017 Dodge Journey AWD, Black
Change
2014 Dodge Journey AWD Review Is this really a Man Van

COMMENTS

ABS, traction and service AWD light on
Region:U.S. Great Lakes. Journey's Year:2014. Posted April 18, 2016. Unplug the sensor, and make sure you did not bend a pin. They are touchy. Then disconnect the negative terminal of your battery for about 30 minutes to reset your system. See what happens. sidney john, 2late4u and OhareFred.
New cause for Service AWD light, ABS and traction ...
My 2014 Journey has this issue. The ABS, Traction Control, and Service AWD lights are on. I also know I have a wheel hub going bad and is the likely cause. I will be replacing the hub and sensor tomorrow. However, I wanted to know if anyone else has had wheel hub issues on their Journey. This is the third wheel hub. The original went at 40K miles.
What Does Service Awd Mean on a Dodge Journey : Unveiling the Power Within
Conclusion. In summary, the "Service AWD" message on your Dodge Journey indicates an issue with the All-Wheel Drive system, which requires attention from a qualified technician. Ignoring this message can have adverse effects on your vehicle's performance and safety. If you encounter the "Service AWD" message, it is recommended to ...
Service All Wheel Drive System Message: Causes and Fixes
January 28, 2023. A 'service all-wheel drive system' message is a sign of an issue with the all-wheel drive system. The issue could have been set off by something as little as installing an incorrect tire size or a low battery. A worn or contaminated rear differential fluid is also something you should check.
What Does the Dodge AWD Warning Light Mean? [Explained]
May 18, 2023. The Dodge AWD warning light is a system that helps indicate when there is a problem with the all-wheel drive system. This system is essential because it helps to keep the car from getting stuck in snow or mud. When this light comes on, it is essential to take the car to a mechanic so they can check the system and make sure ...
Easy! Service light reset Dodge Journey
Very simple steps on how to reset the Service light / Service indicator on a Dodge Journey. Please press the like button if it was helpful! CheersDisclaimer:...
Dodge Journey ABS, traction control and Service AWD lights
Dodge Journey ABS, traction control and Service AWD lights. I have a 2016 Dodge Journey. A week or so ago all of those lights came on at once. They come on every time I start the car but go off after a little while. Today right after I started the car it made a weird noise and felt almost like the wheels were slipping as I stopped at the end of ...
DODGE 2016 JOURNEY OWNER'S MANUAL Pdf Download
Page 438 436 STARTING AND OPERATING DRIVE (D) WARNING! This range should be used for most city and highway Do not coast in NEUTRAL and never turn off the driving. It provi. View and Download Dodge 2016 Journey owner's manual online. 2016 Journey automobile pdf manual download. Also for: Journey 2016.
How to service your All Wheel Drive (AWD) system.
My DIY playlisthttps://www.youtube.com/playlist?list=PLrI5cgwFMMxzKHzd_IoUFnv-KMBuaz4W3Product review playlisthttps://www.youtube.com/playlist?list=PLrI5cgwF...
SERVICE AWD Light
When the SERV AWD light comes on the AWD system does not work - rear wheel drive only. When I turn the car off and restart the light is off and the system seems to reset - until the next event that triggers the SERV AWD light. Just had it in the shop last week for same issue. System had stored code c147b - front axle disconnect circuit.
2016 Dodge Journey Service Schedules & Maintenance Pricing
Hall Chrysler Dodge Jeep Ram Chesapeake. Servicing DODGE Vehicles. (757) 383-9513. 441 Viking Dr. Virginia Beach, VA 23452. 125 miles away.
Dodge Journey 2016- Service Light Reset & Oil Life Reset
Very simple steps on how to reset the Service light / Service indicator on a Dodge Journey 2016-. Please press the like button if it was helpful! CheersDiscl...
service awd light came on, need suggestions
I was plagued with intermitten service AWD light for a while, turned out to be the solenoid on the front diff was faulty. Small update on this. I bougth a scanner that can read abs codes and transmission codes hoping it might be a wheel speed sensor. But no codes, also checked the fuses and relay, all seems fine there.
Tested: 2016 Dodge Journey V-6 AWD
Specifications. SPECIFICATIONS. 2016 Dodge Journey V-6 AWD. VEHICLE TYPE. front-engine, 4-wheel-drive, 7-passenger, 4-door hatchback. PRICE AS TESTED. $34,660 (base price: $27,590) ENGINE TYPE ...
Dodge Journey ABS light is on
When the ABS light / comes on in your Journey, the anti-lock braking system is disabled. The vehicle can still be braked without ABS. But if the BRAKE light / also comes on, it indicates a malfunction in the braking system and you must stop driving due to risk of brake failure.. 1. Bad wheel speed sensor. Dodge Journey has an ABS sensor at each wheel hub which measures the speed of the ...
2016 Dodge Journey Review & Ratings
2016 Dodge Journey SXT 4dr SUV AWD (3.6L 6cyl 6A) I sporadically researched mid-size SUVs and crossovers for a couple of years as I pondered replacing my still-running 1997 Dodge "Immortal Caravan ...
2016 Dodge Journey Price, Value, Ratings & Reviews
Used 2016 Dodge Journey Pricing. Used 2016 Dodge Journey pricing starts at $8,856 for the Journey SE Sport Utility 4D, which had a starting MSRP of $21,990 when new. The range-topping 2016 Journey ...
All Wheel Drive (AWD)
New cause for Service AWD light, ABS and traction control light to come on 1 2. By Canadian Paul, February 27, 2014. 34 replies; 65k views; Kubiackalpha; March 5; ... 2016 dodge journey 3.6l awd sxt; 1 reply; 519 views; larryl; September 12, 2023; Front tires locking when taking turns By KayKay, September 10, 2023. 1 reply;