trip odometer camry

Toyota Camry  XV50 (2012–2017) Owners Manual When driving » Instrument cluster » Gauges and meters Changing the odometer/trip meter display

Pressing the button changes the display as follows.

● Odometer

Displays the total distance the vehicle has been driven.

● Trip meters A and B

Displays the distance the vehicle has been driven since the meter was last reset. Trip meters A and B can be used to record and display different distances independently.

Press and hold the button to reset.

● Outside temperature

Displays the outside air temperature.

The temperature range that can be displayed is from -40°F (-40°C) to 122°F (50°C).

● Average fuel consumption

Displays the average fuel consumption since the function was last reset.

• To reset the function, press and hold the button while average fuel consumption is being displayed.

The average fuel consumption meter will also be reset, returning the needle to the 0 position.

• Use the displayed average fuel consumption as a reference.

● Current fuel consumption

Displays the current rate of fuel consumption

Changing the odometer/trip meter display

Toyota camry xv50 (2012–2017) owners manual.

• For your information
• Symbols used throughout this manual
• Before driving
• When driving
• Interior features
• Maintenance and care
• When trouble arises
• Vehicle specifications
• Toyota Camry Owners Manual
• Toyota Camry Service Manual

• Forum Listing
• Marketplace
• Advanced Search
• Toyota Passenger and Sports Car Forums
• Camry and Solara Forum
• Camry 8th Generation (2018-2024)

Where is the trip meter?

• Add to quote

I just bought a 2023 Camry LE and can’t find the trip. It shows the odometer and all that, but I can’t find where the trip is.  

It does not have that button.  

@Krueger It should. All 8th generation camry's have the “ODO/TRIP” switch there. Take a picture of that area and post it here. Keep pressing that switch until you see the TRIP A or B show up on the MID.  

You are good man helping out Krueger. Thank you for being helpful to others. Krueger  

How do you like it so far, comfort as far as seats and ride or road noise? My 2017 XLE is smooth but boy they skimped out on noise insulation.  

AlI I do is turn up the radio louder and all is just fine......  

• ?            
• 594K members

Top Contributors this Month

How to Switch From Trip Meter to Odometer Toyota Camry

To switch from the trip meter to the odometer in your Toyota Camry, locate the trip meter button near the speedometer and tachometer gauges. Press the button to cycle through display options until you reach the odometer reading. This will show the total distance traveled. Toggle between the trip meter and odometer easily by pressing the control button on the dashboard . Confirm the switch on the instrument cluster. Verify the total mileage displayed for accuracy. For a more detailed walkthrough of switching between the trip meter and odometer, keep exploring the steps provided.

Table of Contents

Locate the Trip Meter Button

To begin the process of switching from the trip meter to the odometer in your Toyota Camry, the first step is to locate the Trip Meter button on the vehicle's dashboard. The Trip Meter button is typically situated near the speedometer and tachometer gauges. It may be labeled as 'Trip' or 'Trip Meter' and is used to cycle through different display options on the instrument cluster .

Once you have located the Trip Meter button, you can press it to switch from the trip meter reading to the odometer reading . The trip meter is used to measure the distance traveled for a specific trip, while the odometer provides the total distance the vehicle has covered since it was manufactured.

Understand the Display Options

Understanding the display options available on the instrument cluster of your Toyota Camry provides valuable insight into the different information and settings that can be accessed while driving. Here are five key display options you may encounter:

• Trip Meter: Displays the distance traveled since the last reset.
• Odometer: Shows the total distance the vehicle has traveled.
• Average Fuel Consumption: Indicates the average fuel efficiency over a specified period.
• Outside Temperature: Displays the current temperature outside the vehicle.
• Clock: Shows the current time.

Each of these display options serves a specific purpose, allowing you to stay informed about important aspects of your driving experience. By familiarizing yourself with these options, you can easily navigate through the information displayed on your Toyota Camry's instrument cluster and access the data you need while on the road.

Access the Odometer Reading

Accessing the odometer reading in your Toyota Camry is a straightforward process that provides you with essential information about the total distance your vehicle has traveled. To access the odometer reading, follow these simple steps:

• Step 1: Sit in the driver's seat of your Toyota Camry and ensure the vehicle is turned off.
• Step 2: Locate the dashboard display where the odometer reading is shown.
• Step 3: Turn the ignition key to the 'On' position without starting the engine. This will power up the vehicle's systems.
• Step 4: Look for the total mileage displayed on the odometer. This number represents the total distance your Toyota Camry has traveled since it was new.

Toggle Between Trip Meter and Odometer

Switching between the trip meter and odometer on your Toyota Camry can be done easily using the control button provided on the dashboard. This feature allows you to conveniently switch between tracking your overall mileage and monitoring the distance covered during specific trips.

Here are some simple steps to toggle between the trip meter and odometer:

• Locate the control button: Identify the button on your dashboard that is specifically designated for switching between the trip meter and odometer.
• Press the button: Press the button to cycle through the different display options available for your Toyota Camry's mileage tracking.
• Watch the display: Keep an eye on the information displayed on your instrument cluster as you toggle between the trip meter and odometer.
• Confirm the selection: Ensure that the desired mileage tracker (trip meter or odometer) is being shown on the dashboard.
• Enjoy the flexibility: Appreciate the convenience of easily switching between monitoring your overall mileage and tracking individual trip distances with just the push of a button.

Confirm the Switch Has Been Made

To verify the selection made between the trip meter and odometer on your Toyota Camry, refer to the displayed mileage information on the instrument cluster . If you see the total mileage of your vehicle, then the switch from the trip meter to the odometer has been successfully completed.

The odometer typically shows the overall distance your car has traveled since it was manufactured. It is a useful tool for keeping track of the total wear and tear on your vehicle. Once you have confirmed that the odometer is displaying, you can rest assured that the changeover has been executed correctly.

It is essential to double-check this switch to ensure that you have accurate mileage information at your disposal. If you encounter any issues or uncertainties regarding the switch from the trip meter to the odometer, consult your Toyota Camry's user manual for further guidance. By following these steps, you can reliably confirm that the switch has been made and proceed with confidence in monitoring your vehicle's mileage.

In conclusion, switching from the trip meter to the odometer on a Toyota Camry is a simple process that involves:

• Locating the trip meter button
• Understanding the display options
• Accessing the odometer reading
• Toggling between the two

By following these steps, you can easily switch between the trip meter and odometer to monitor your mileage and trips effectively.

Matt Goldie

I'm Matt Goldie, a car enthusiast turned mechanic. The garage is my second home, where each engine and part tells a unique story. Seeing car owners frustrated with issues inspired me to start DIY Car Expert, offering reliable solutions to tackle problems with ease. 🚗✨

Recent Posts

How to Stop Your Brakes From Squeaking

Find out how to stop your brakes from squeaking by following expert tips and DIY solutions to ensure a smooth and quiet ride.

How Heavy, Wide, And Tall is a Toyota Sienna.

How Heavy, Wide, And Tall is a Toyota Sienna When considering a new vehicle purchase, it's essential to understand the physical dimensions and weight of the car. In this article, we'll delve into...

How to Reset the Trip Mileage in a Toyota Camry

Your odometer can come in handy if you know how to reset it. The newer Toyota Camry models come with two options—Trip A and Trip  B. You could use Trip A for regular trips and business mileage tracking, while Trip B can be used to monitor mileage for a specific purpose, like tracking fuel efficiency for each tank of gas. Let’s walk you through it!

2007 – Present Models

1997 – 2006 models.

• Point out the display area where the odometer and trip meter are located.
• Direct the viewers to find a little lever near the display.
• Explain that pushing the lever once will switch the display to “Trip A,” showing the distance for the current trip.
• Push the lever again to change to “Trip B,” which can be used for tracking miles on a separate trip. 
• While the specific trip meter is displayed, press and hold the same button to switch between trip meters.
• The display zeroes itself out when the button is held down.
• To return to the odometer display after using Trip A or Trip B, tap the button again, and the display will show the total mileage (odometer) once more.
• Locate the trip meter button on the dashboard. It is usually located near the speedometer and has a label that says “ TRIP .”
• Press and hold the trip meter button until the trip meter display resets to zero . This should take about 5 seconds.
• Release the button once the trip meter display resets to zero.

Related posts:

No related posts.

Leave a Comment Cancel reply

Toyota Owners

Toyota Español

Welcome, here you'll have access to your Support Dashboard where you can see your support requests status or create a new request.

How do I reset the trip meter on my vehicle?

Please check your owner's manual for reset instructions pertaining to your vehicle. please click here to view a video. disclaimer: not all features are available on all vehicles and model grades. please see your owner's manual for further detail... sep 24, 2022 • knowledge, new section, only answer.

Please check your  Owner's Manual for reset instructions pertaining to your vehicle.

Please click  here to view a video.

Disclaimer: Not all features are available on all vehicles and model grades. Please see your  Owner's Manual for further details and important safety information.

Related Articles

• How do I reset the maintenance required light on my vehicle?
• How can I reset my User Profile PIN?
• How do I reset the height on my vehicle's adjustable power liftgate?

Not finding your answer?

Ran When Parked - Car, Vehicle & Truck Guides and Repair Journals.

What is a Trip Odometer: Explaining Your Car’s Mileage Tracker

A trip odometer is a useful feature found alongside the main odometer on a vehicle’s dashboard. It provides additional information to the driver by tracking the distance covered during individual trips.

Unlike the main odometer, which logs the total mileage the vehicle has accumulated over its lifetime, a trip odometer can be reset. This allows drivers to measure the distance of specific journeys, monitor fuel consumption for precise distances, or gauge travel time for regular routes without affecting the permanent record of total miles traveled by the vehicle.

We can reset the trip odometer before starting a new journey to ensure accurate distance tracking for that particular trip.

Many modern vehicles come with digital odometers, which include one or more trip meters providing an easy-to-read display.

The advantage of having this information readily available helps us manage our driving patterns, plan for maintenance, and keep tabs on vehicle performance.

It’s a straightforward yet indispensable tool that complements the comprehensive data offered by the vehicle’s dashboard.

JUMP TO TOPIC

• 1.1 Evolution from Mechanical to Digital
• 1.2 How Odometers Measure Distance
• 2.1 Tracking Mileage for Service Intervals
• 2.2 Fuel Economy and Efficiency
• 3.1 Common Methods of Odometer Tampering
• 3.2 Legal Implications and Consumer Protection

Trip Odometer: A Detailed Dive

Odometers have been central to how we understand vehicle usage. They track the total distance a vehicle has traveled, transitioning from mechanical gears to crisp digital displays.

Evolution from Mechanical to Digital

Initially, odometers were mechanical devices, consisting of a series of gears connected to the vehicle’s transmission. As the car moved, the rotation of the wheels turned the gears, advancing the odometer’s display to reflect the distance traveled.

Their durability meant they could last the lifetime of the vehicle, but they were not without drawbacks. Precise calibration was essential to ensure accuracy, and physical wear could eventually lead to inaccuracy or failure.

In recent years, digital odometers have largely replaced mechanical ones. They work by receiving electronic signals from a sensor, usually located in the vehicle’s transmission.

These signals are then processed by the vehicle’s computer system to display the traveled distance on the digital screen.

Digital odometers offer more than just a readout of total distance; their integration with the vehicle’s electronic systems allows for additional features like trip meters and maintenance reminders.

How Odometers Measure Distance

This distance is known as the tire’s circumference, and by counting each revolution, odometers can determine how far the car has gone.

For a more comprehensive look, here’s an overview:

A trip odometer , specifically, allows us to measure the distance for individual journeys. Located within the instrument cluster, it operates similarly to the main odometer but can be reset to zero, providing separate tracking for the distance of specific trips.

This function is valuable for mileage tracking for business travel, monitoring fuel efficiency, or even just noting the length of a road trip.

A speedometer , by contrast, informs us how fast the vehicle is moving at any given moment, which, although related to distance measurement, serves a separate role in the vehicle’s suite of instrumentation.

The Role of Odometers in Vehicle Maintenance

Odometers serve as vital tools for monitoring vehicle health and scheduling maintenance. They provide essential data that allow us to keep our vehicles running efficiently.

Tracking Mileage for Service Intervals

• Engine Oil : Replace approximately every 5,000 miles
• Air Filter : Replace around 15,000 to 30,000 miles
• Transmission Fluid : Change every 30,000 to 60,000 miles

Fuel Economy and Efficiency

Fuel economy can be optimized through diligent maintenance, using the trip odometer to monitor fuel use between fill-ups.

This helps us assess the vehicle’s fuel efficiency and detect potential issues, which is especially important for the engine and transmission systems.

Accurate readings enable targeted improvements in driving habits or prompt service checks to prevent inefficiencies.

Detecting and Preventing Odometer Fraud

In our experience, preventing odometer fraud begins with awareness and understanding of the common tampering methods. The knowledge of legal protections further adds to a consumer’s defense against this crime.

Common Methods of Odometer Tampering

Odometer fraud is a deceptive act aimed to increase a used car’s resale value by reducing the mileage displayed. Tampering often involves disconnection , resetting , or alteration of the odometer.

Physical Tampering: Manual rolling back of miles on older odometers.

Electronic Tampering: Using sophisticated software to reprogram digital odometers.

Vehicle Data Interference: Altering mileage data in vehicle control units.

To combat these illegal practices, we suggest the following preventative measures :

• Service Records Analysis : Cross-reference the odometer reading with historical service data.
• Wear and Tear Inspection : Physical signs of use may not match with the reported mileage.
• Diagnostic Tools : Use electronic diagnostics to fetch original mileage data from the vehicle’s computer.

Legal Implications and Consumer Protection

Odometer tampering is illegal and violators may face substantial penalties, including fines and imprisonment.

Consumers should be aware that:

We need to ensure that consumers are aware of their rights and the steps taken to seek retribution.

Reporting suspected fraud to agencies like the National Highway Traffic Safety Administration (NHTSA) is crucial.

Regulations at both federal and state levels are in place as a safety net for those impacted by this crime.

Also, professional inspections by certified mechanics can provide an additional layer of protection during the used car buying process.

• Recent Posts

• Are Autolite Spark Plugs Good? Evaluating Performance and Reliability - May 6, 2024
• High Biting Point on Clutch: Understanding the Mechanics and Implications - May 6, 2024
• Change Oil Every 3000 Miles: Debunking the Myth or Necessary Routine? - May 6, 2024

Related posts:

• Car Won’t Move in Drive: Fixing Transmission Issues
• AC Low Side Pressure Too High: Possible Causes and Fixes
• Car Hesitates To Start – All Possible Reasons With Solutions
• Car Alarm Goes off When Unlocking With Key: Reasons
• Noise When Braking at Low Speed: Causes, Fixes, and Cost
• Reset ABS Light on Dodge Grand Caravan: Effective Guide
• Subaru Outback Trunk Won t Open: Why and How To Fix It
• Reset Volkswagen Passat Service Maintenance Light – 8 Steps

• Toyota Manuals
• Quick reference manual

Toyota Camry 2020 Quick Reference Manual

• Quick reference manual (26 pages)
• Manual (592 pages)
• page of 53 Go / 53

Table of Contents

• Instrument Panel
• Instrument Cluster
• Indicator Symbols
• Locking Operation
• Panic Button
• Smart Key System
• Start Function
• Hood Release
• Engine Maintenance
• Features & Operations
• Automatic Transmission
• Parking Brake
• Seat Adjustments-Front
• Lights & Turn Signals
• Windshield Wipers and Washers
• Air Conditioning/Heating
• Rear View Monitor System
• Tilting Operation
• Cup Holders
• Steering Wheel Switches
• Garage Door Opener
• Toyota Safety Sense
• Safety Connect
• Tool Location
• Floor Mat Installation

Advertisement

Quick Links

• 1 Instrument Panel
• 2 Smart Key System
• 3 Engine Maintenance
• 4 Features & Operations
• 5 Rear View Monitor System
• Download this manual

Related Manuals for Toyota Camry 2020

Summary of Contents for Toyota Camry 2020

• Page 1 QUICK REFERENCE GUIDE 2020...
• Page 2 Owner’s Manual. Each box contains safe operating instructions to help you avoid injury or equipment malfunction. All information in this Quick Reference Guide is current at the time of printing. Toyota reserves the right to make changes at any time without notice.
• Page 3 Seat heaters/ventilators BLUETOOTH® DEVICE Seats-Head restraints 46-48 PAIRING SECTION Visit your Toyota dealer for information on customizing this feature. Programmable by customer. Refer to the Owner’s Manual for instructions and more information. ® HomeLink is a registered trademark of Gentex Corporation.

Page 4: Instrument Panel

• Page 5 If equipped. For details, refer to the “Navigation and Multimedia System Owner’s Manual” or visit www.toyota.com/audio-multimedia for additional resources. Emergency flasher switch Audio/navigation system Air conditioning/heating controls Seat heaters /ventilators switches Qi Wireless charger switch Electric parking brake switch Driving mode select switches...

Page 6: Instrument Cluster

• Page 7 If the indicator does not turn off within a few seconds of starting the engine, there may be a malfunction. Have the vehicle inspected by your Toyota dealer. If the indicator flashes, there may be a malfunction. Refer to the Owner’s Manual.

Page 8: Locking Operation

Page 9: smart key system, page 10: hood release, page 11: features & operations, page 12: parking brake.

• Page 13 Electric parking brake (if equipped) PARKING BRAKE Driver side Automatic mode Manual mode Parking brake light Parking brake light Automatic (shift lever operation) To turn automatic mode ON, while vehicle is stopped, pull and hold switch until While depressing brake, shifting into P position will automatically set the brake and turn the parking brake indicator and parking brake light on.
• Page 14 FEATURES & OPERATIONS Driving mode select switches (if equipped) Normal - Suitable for normal driving. SPORT mode - Use when a higher level of response is desired, such as when driving in mountainous regions. ECO MODE - Helps achieve lower fuel consumption during trips that involve frequent accelerating and braking.

Page 15: Seat Adjustments-Front

Page 16: lights & turn signals, page 17: windshield wipers and washers, page 18: air conditioning/heating.

• Page 19 With “SYNC” button (continued) “SYNC” button - Indicator ON: Synchronized temperature settings for driver and pas- Type B sengers. Indicator OFF: Separate temperature settings for driver and passengers. Temperature selector Temperature selector (passenger’s side) Airflow mode display (driver’s side) Outside rearview mirror*/ Windshield airflow/defogger rear window defogger Automatic climate control ON -...
• Page 20 FEATURES & OPERATIONS Blind Spot Monitor with Rear Cross Traffic Alert (BSM w/RCTA) (if equipped) Outside rear view mirror indicators Indicators Buzzer (RCTA only) RCTA function display Indicators The Blind Spot Monitor is a system that has two functions: The system is designed to use radar sensors to detect vehicles traveling in the Camry’s blind spot.

Page 21: Rear View Monitor System

• Page 22 FEATURES & OPERATIONS Multi-Information Display (MID) Indicators Shift position Menu icons Display area Previous screen Odometer/trip meter control Enter/Select display Scroll/search Indicators screens Odometer/trip meter control Push “meter control switches” to change information in the following: Drive information Warning messages Audio system-linked display Settings display Driving assist system information...
• Page 23 Color Head-up display (HUD) (if equipped) Shift position/speed limit display area Driving assist system status/ navigation system-linked display area Vehicle speed display (if equipped) Information display area ECO driving indicator/Tachometer The head-up display can display the current vehicle speed and ECO driving indicator in front of the driver.

Page 24: Tilting Operation

• Page 25 Moonroof (if equipped) SLIDING OPERATION TILTING OPERATION Push once to open partway; Push once to open completely. again to open completely. Open Tilt Close Close Recommended driving position to minimize wind noise. Lightly press either side of the moonroof switch while opening/tilting is in progress, the moonroof stops partway.

Page 26: Door Locks

• Page 27 Power outlet-12V DC USB media port Open lid Connecting a compatible device and cable into the USB media port will support charging and music playback through the audio multimedia system. USB charge-ports (if equipped) (Charge only)
• Page 28 Refer to the “Navigation and Multimedia System Owner’s Manual” or visit www.toyota.com/audio-multimedia for additional resources. NOTE: Concentrating on the road should always be your first priority while driving. Do not use the Audio Multimedia System if it will distract you.

Page 29: Steering Wheel Switches

• Page 30 FEATURES & OPERATIONS Qi Wireless charger (if equipped) Operation indicator light Charge area Power switch Press (1) When the engine is turned off, the last state (ON/ OFF) of the charger is memorized. Place (2) Place device nearest the center of charging area for best results.

Page 31: Garage Door Opener

Page 32: toyota safety sense.

• Page 33 Refer to the Toyota Owner’s Manual for a list of additional situations in which the system may not operate properly. Pre-Collision Warning...
• Page 34 As part of the Pre-Collision System, this function is also designed to first provide an alert and then automatic braking if needed. Refer to the Toyota Owner’s Manual for additional limitations and information. CHANGING PCS ALERT TIMING Middle...
• Page 35 Note: The system is enabled each time the power switch is turned to ON mode. Refer to the Toyota Owner’s Manual for additional information on PCS operation, settings adjustments, limitations, and precautions before attempting to use it. Lane Departure Alert with Steering Assist...
• Page 36 Ignition cycle until changed by the driver or the system is reset. Refer to the Toyota Owner’s Manual for additional information on LDA operation, settings adjustments, limitations, and precautions before attempting to use it. LANE DEPARTURE ALERT...
• Page 37 For example, LDA may not function on the side(s) where white/yellow lines are not detectable. Refer to the Toyota Owner’s Manual for additional information on LDA operation, settings adjustments, limitations, and precautions before attempting to use it.
• Page 38 ™ TOYOTA SAFETY SENSE SWAY WARNING SYSTEM Continuous lane deviations from swaying. Gentle swaying from driver’s inattentiveness. Acute steering wheel operation after the number of operations decrease due to driver’s inattentiveness. SWS is a function of LDA and is designed to detect swaying based on the vehicle location in the lane and the driver’s steering wheel operation.
• Page 39 Dynamic Radar Cruise Control (DRCC) or Full-Speed Range* DRCC DRCC helps maintain a pre-set distance to a preceding vehicle when the preceding vehicle is traveling at a lower speed. This mode is always selected first when the cruise control button is depressed. Constant speed cruise control mode is also available. DRCC is designed to function at speeds between approximately 30 to 110 MPH and is intended for highway use.
• Page 40 ™ TOYOTA SAFETY SENSE ADJUSTING DISTANCE Preceding To change the vehicle-to- vehicle mark vehicle distance Push the “ ” button to cycle through the settings, which will change progressively. LONG MIDDLE SHORT (default setting) This mode employs a radar sensor to detect the presence of a preceding vehicle following distance and operates to maintain a preset following distance from the vehicle ahead.
• Page 41 Decrease speed To adjust speed or cancel, see steps (2) and (3) of ADJUSTING SET SPEED on page 37. Refer to the Toyota Owner’s Manual for additional information on DRCC operation, settings adjustments, limitations, and precautions before attempting to use it.
• Page 42 By using high beams more frequently, the system may allow earlier detection of pedestrians and obstacles. Refer to the Toyota Owner’s Manual for additional information on AHB operation, settings adjustments, limitations, and precautions before attempting to use it. ACTIVATING THE AHB SYSTEM “AUTO”...

Page 43: Seat Belts

Page 44: safety connect, page 45: tool location.

• Page 46 Your vehicle comes standard with the Star Safety System , which combines Anti- Toyota’s ABS sensors detect which wheels are locking up and limits wheel lockup by “pulsing” each wheel’s brakes independently. Pulsing releases brake pressure repeatedly for fractions of a second. This helps the tires attain the traction that current road conditions will allow, helping you to stay in directional control.

Page 47: Floor Mat Installation

• Page 48 ® BLUETOOTH DEVICE PAIRING SECTION ® Do not attempt the Bluetooth Pairing process while driving.
• Page 49 Pairing for your phone ® Pairing your phone is the first step in connecting with your Toyota. This pairing process is quick and easy. All you have to do is setup the phone and multimedia system to form a connection.
• Page 50 BLUETOOTH ® DEVICE PAIRING Bluetooth Pairing for your phone (cont.) ® "Connecting" displays while STEP 6 STEP 7 device is forming the connection to your multimedia system. phone a message will be "You may need to allow message access on your phone".
• Page 52 Quick Reference Guide 2020 toyota.com Printed in U.S.A. 9/19 19-MKG-13590...

Rename the bookmark

Delete bookmark, delete from my manuals, upload manual.

In The Garage with CarParts.com

What Do the Odometer and Trip Meter Do?

Reviewed by

Technical Reviewer at CarParts.com

Written by CarParts.com Research Team - Updated on October 16th, 2023

• An odometer measures the distance your vehicle has traveled over the course of its lifetime.
• Meanwhile, a trip meter measures the distance over a specific trip.  The trip meter’s count can be reset, but it still relies on the odometer’s system to function.
• There are two main types of odometers: digital and mechanical.

The odometer is one of the basic gauges all vehicles possess, and you’ll often find a trip meter linked to it in some way. What exactly do they do and how do they work?

What Does the Odometer Do?

An odometer is in charge of measuring the distance your vehicle has traveled over the course of its lifetime. It displays this information on your dashboard. On older models, the odometer appears as a set of mechanical numbers. Newer vehicles have it as a digital display instead. Odometers may use either miles or kilometers depending on where the vehicle was manufactured and sold.

What Is the Difference Between the Odometer and the Trip Meter

Both measure the distance your vehicle has traveled. The main difference between the trip meter and odometer is that the odometer measures the total distance throughout your vehicle’s lifetime. The odometer cannot be easily reset, and it’s illegal to do so. The trip meter, meanwhile, measures the distance over a specific trip. A lot of vehicles even have a trip a and a trip b gauge. You can usually reset it easily by pushing a long, thin button near the trip meter. However, how to reset a trip meter may also depend on the model of your vehicle, so check your vehicle’s manual to be sure.

Both are very important dashboard displays. The trip meter can help you gauge how far you’ve traveled on a tank of gas, for example, which helps you figure out if your fuel economy is lower than usual. The odometer, meanwhile, is very useful when you’re buying or selling a used vehicle . It can tell you the total mileage of the vehicle, which helps you gauge how heavily it was used.

How Does a Trip Meter/Odometer Work?

Both the trip meter and the odometer work the same way. The trip meter’s count can be reset, but it still relies on the odometer’s system to function. They aren’t separate, and they’re also often linked to the speedometer. There are two main odometer types—mechanical and digital.

Mechanical odometers and trip meters may be old, but they are still pretty common. Vehicle manufacturers only started switching to digital readers in the early 2000s, meaning a lot of cars on the road are still using this system.

A mechanical odometer uses the same assembly as a mechanical speedometer. Using a small electric motor called a stepper motor, the mechanical odometer numbers can turn in relation to the miles traveled. The stepper motor relies on a series of pulsed voltages to gauge these miles. The system also makes use of a series of gears aligned to the diameter of the tires.

The more modern, digital odometers use magnetic sensors instead of electric motors and gears. Instead, these odometers record the rotations of the transmission output shaft using magnetic sensors. These rotations are recorded in the onboard computer, which translates it into distance and displays the information on the dash. Some vehicles use the abs wheel speed sensors to determine vehicle speed and odometer reading.

Digital odometers keep their readings even if the battery is disconnected. The vehicle stores the data permanently using what’s called a Programmable Read-Only Memory (PROM) chip. This chip keeps itself updated by overwriting old readings with new ones, and it doesn’t require a battery.

How Accurate Is a Trip Meter/Odometer?

Properly calibrated trip meters and odometers are pretty accurate. At worst, the actual physical distance traveled might be off by a few miles. However, there are a couple of things that can mess with an odometer’s accuracy:

Odometers, trip meters, and speedometers all rely heavily on tire size to make their calculations. If you replace your vehicle’s tires with ones that are bigger or smaller than the originals, it may result in these calculations being off. The discrepancy will depend on how drastic the size difference is. Regardless of tire size or modifications, you cannot adjust the odometer. As stated earlier, it is illegal to tamper with the odometer of a vehicle for any reason.

Odometer Replacement

When your odometer and trip meter are not working, you’re allowed to have it fixed. However, whether you use a brand new or used odometer as a replacement, the reading on the replacement part will not be exactly like your old one out of the box. Different states have varying laws concerning how you should proceed, but the main idea is that you’ll need to disclose the vehicle’s true mileage to any future buyer. Failing to do so is a federal offense.

For certain digital odometers, authorized facilities can transfer old mileages onto new odometers before they’re used as replacements.

How To Tell if an Odometer Has Been Tampered With

Even with the laws in place forbidding odometer fraud, there will be a few outliers who’ll attempt to sell their used vehicle with an undisclosed inaccurate odometer reading. One easy thing you can check yourself is the repair sticker

Any repairman worth their salt will follow state laws and place a repair sticker when they replace the odometer with a brand new one with a reset counter. This sticker will include the mileage of the original odometer as well as the date of the replacement or repair. You can find this sticker on the left door frame of the vehicle.

Another way to check true mileage is to look at CARFAX or other reporting agencies. If the vehicle has had repairs done to it or any other services that are reported, then the mileage of the vehicle will also be recorded. Check the mileage and make sure it is not more then current mileage on the vehicle.

Another way to check true mileage is to look at CARFAX or other reporting agencies. If the vehicle has had repairs done to it or any services that are reported, then the mileage of the vehicle will also be recorded. – Anthony Harlin, ASE Certified Master Automobile Technician

If you live in a state where emissions testing is mandatory, then the mileage will be recorded every time the testing is done. In California, this occurs every two years, so you will be able to quickly spot discrepancies. For instance, if the vehicle’s last test shows that it had 80,000 miles on the odometer but the vehicle’s odometer shows 60,000 now, then it has been tampered with and is inaccurate.

That being said, we always recommend you bring a licensed mechanic with you before buying a secondhand vehicle. They’ll be more aware of what to look out for, such as broken seals around the odometer cables and signs of damage to other parts of the vehicle. After all, odometer mileage is only one part of a vehicle’s journey. 60,000 miles over five years might seem good on paper, but you can’t always tell right away if it’s been a smooth ride throughout.

Keep Reading: Related Posts

Share this story

The CarParts.com Research Team is composed of experienced automotive and tech writers working with (ASE)-certified automobile technicians and automotive journalists to bring up-to-date, helpful information to car owners in the US. Guided by CarParts.com's thorough editorial process, our team strives to produce guides and resources DIYers and casual car owners can trust.

Tony Harlin is a Master Gas and Diesel Diagnostic Technician with over 18 years of experience. He works full-time at a large independent automotive shop as a driveability and repair technician working on all types of vehicles with a focus on diesels. ASE certifications include A1-A9, L1 and L2, as well as X1.

Any information provided on this Website is for informational purposes only and is not intended to replace consultation with a professional mechanic. The accuracy and timeliness of the information may change from the time of publication. Read our full disclaimer here.

View all Questions & Answers

">Read more

For The Car Owner

Get Premium Automotive Content

that can help you extend the service life of your car in your inbox.

Thanks for subscribing! You will soon receive the best repair guides & features from CarParts.com in your inbox.

• location_on Address 1301 Ave T, Grand Prairie, TX, 75050
• local_phone Phone number 1-866-529-0412
• email Email Us
• Ignition System
• Braking System
• Exhaust System
• Cooling System
• Transmission
• Warning Lights
• Product Reviews
• Throttle Body Fuel Injection
• Crankshaft Position Sensor Symptoms
• Alternator Wiring Diagrams
• How to Replace a Cabin Air Filter
• How to Diagnose CV Joint Noise
• How Often to Change Your Oil Filter
• Signs of Bad U-Joints
• Dirty Engine Air Filter
• Exhaust System Diagram
• OBD2 Codes 101
• EVs and Hybrids
• Trivia and History
• Automotive World
• Interactive Car Articles
• Web Stories
• Catalytic Converter Theft
• Electric Vehicle Myths
• Team CarParts.com's First Cars
• Editorial Process
• Refer A Friend
• Side Mirror

How To Switch From Trip Meter To Odometer Toyota Camry

By pushing and holding the RESET button on the left-hand steering wheel lever, you can reset all the data in the trip odometer TM, including the distance, average fuel consumption, average speed, and driving time. Only the distance driven is reset when the RESET button is pressed.

In This Article...

Is the trip meter the same as an odometer?

Odometer rollover, which occurs when an odometer or trip meter resets to zero after reaching the maximum value, Digital clocks might not roll over. [15]

There is usually a trip meter in newer vehicles (trip odometer). Since a trip meter, unlike an odometer, may be reset at any time throughout a trip, it is possible to record the distance covered during any specific trip or segment of a trip. It used to be a wholly mechanical device, but the majority of current cars now have electronic versions. There are frequently many trip meters on many modern vehicles. The maximum value that most mechanical trip meters will display is 999.9. A frequent application of the trip meter is to reset it to zero at each instruction in a series of driving directions so that one is certain when they have arrived at the next turn. This makes it very simple to precisely track the energy efficiency of the car.

What does “travel” mean on my odometer?

Your car’s odometer will show you how many miles it has covered. Your trip odometer keeps track of the distance you’ve traveled since it was last reset. The trip odometer can be used to figure out how many miles you’ve covered on a road trip or how many you’ve driven since the last fill-up.

Simply click the TRIP ODOMETER button on the instrument panel to switch between the trip odometer and the standard odometer.

How far are trips A and B on the odometer?

The efficiency between each fill for lengthier outstation excursions with numerous fills can be measured using Journey A, and the efficiency of the entire trip can be calculated using Trip B. Keep an eye on the drive cycle. Fuel efficiency will be affected by any changes to the driving cycle, including traffic and even vehicle load.

How can I reset the odometer on my Toyota?

How to reset or turn off the maintenance light is one of the queries we receive frequently. While many new cars utilize synthetic oil, which only has to be changed every 10,000 miles, the maintenance light on a newer model Toyota turns on every 5,000 miles to remind you to get an oil change and rotate your tires. Therefore, a better-safe-than-sorry reminder light illuminates every 5,000 miles. Since traveling to the dealership to have the light reset by a technician may be inconvenient, we wanted to teach how to reset this light in the comfort of your own driveway. Keep in mind that the light also flashes to alert you to rotate your tires every 5,000 miles.

Your Maintenance Required Light Can Be Reset By:

• While the odometer is set to the usual total mileage mode, not “Trip A” or “Trip B,” turn off your engine.
• Turn the key to the “on position” while pressing and holding the mileage reset button.
• When the odometer digits have all reached zero, the maintenance light will have reset, and you can release the button.

We anticipate that these instructions will enable you to reset this light if you so choose. Please do not hesitate to call or visit Heritage Toyota Scion if you are uncomfortable performing this or are unsure of why your maintenance light has come on.

How can I reset the digital odometer?

The odometer can be rolled back to remove hundreds or even thousands of kilometers from the number displayed, just like any other part of a car can be changed. This reading is a crucial piece of information for potential buyers, but the odometer rollback is a scam that has been around for a long time.

An odometer rollback used to describe manually going backwards in the numbers on a mechanical device that measures how far a vehicle has traveled. Since then, odometers have changed to digital versions; the last mechanical odometers were put into use in the early 2000s. Digital odometers can be rolled back using equipment that hooks directly into the electronic circuit of the vehicle, or by removing the circuit board of the car and changing the odometer reading.

What does the odometer say?

The car’s odometer is presumably its most mysterious and yet most noticeable part. There is a potential that if you approach any random automobile owner and inquire about the odometer, he or she may not even be aware of it. The odometer, which is located on the dashboard beneath the steering wheel, shows how far an automobile has traveled.

Odometer reading is highly helpful when determining mileage or when trying to sell your car. Why do you do that? In this blog, we’ll talk about it and other things.

Let’s begin by gaining an understanding of the significance and application of this one overlooked auto part.

• The odometer can it be reset?
• What distinguishes an odometer from a speedometer?
• How does an odometer compute mileage?
• What function does the odometer serve in a car?
• What distinguishes the odometer from the mileage?
• What function does the odometer serve when buying or selling a secondhand car?
• Does a car’s odometer track displacement or position?

How can I locate the odometer?

Owning an automobile necessitates maintenance and periodic inspection of specific components. The odometer, which shows how many miles a car has covered in its lifetime, is a crucial measure to keep an eye on. Although reading an odometer is very simple, if you have a more recent car with plenty of bells and whistles, such as a digital gauge cluster, it may be challenging to get the proper information. In order for you to use this tool to keep on top of your maintenance plan, we conducted research on where to find the odometer in your car and how to interpret what it is telling you.

Look for the little rectangle with typically five or six numbers in it to determine the reading of an odometer. It usually stands close to the speedometer. It might be digital if your car is more recent. If your car is more basic or older, the stats will be mechanical and physical. Simply note the number that is now visible once you’ve found it. This represents the total distance the vehicle has driven throughout its lifetime.

You undoubtedly have more inquiries regarding this tiny device now that you’ve located the odometer and noted the current reading. Please read on for more information about how odometers function, their significance, and their degree of accuracy in determining your vehicle’s mileage.

Why does my automobile say toll road A?

Most likely, that is the trip-odometer displaying the mileage for journey A. When you press the button next to the speedometer, the distance traveled for trip B should be displayed. If you press it once more, the vehicle’s current “overall mileage” should appear. For more information, consult your owner’s handbook; an index is located at the back of the book.

What do trips 1 and 2 in a car mean?

You may monitor the distance your car has covered since the odometer was reset by using the Trip 1 and Trip 2 function in the driver information center (DIC). Trips 1 and 2 are quite simple to reach:

1. Press the MENU button to bring up the Trip/Fuel Information Menu on the DIC.

2. Scroll to either Trip 1 or Trip 2 using the toggle buttons, then hit SET/CLR.

3. Press SET/CLR once more to erase and reset the current trip odometer.

Odometer reset possible?

regrettably, absolutely. In fact, since it’s more difficult to detect, tampering with digital odometer systems is probably more successful. You have the option of changing the display itself or the memory chip that stores the necessary information. However, a knowledgeable automotive mechanic will know where to seek for the right information because mileage data is saved in other car components, such as the powertrain control module.

View prices for your travel dates

Finding an ideal hotel in Pskov does not have to be difficult. Welcome to Rijskaya Hotel, a nice option for travellers like you.

Free wifi is offered to guests, and rooms at Rijskaya Hotel offer a refrigerator.

During your stay, take advantage of some of the amenities offered, including 24 hour front desk, a concierge, and baggage storage. Guests of Rijskaya Hotel are also welcome to enjoy a restaurant, located on site. For travellers arriving by car, there is paid private parking available on-site.

While staying at Rijskaya Hotel, visitors can check out Monument to Saint Equal-to-the-Apostles Princess Olga (1.3 km) and Pokrova and Rozhdestva ot Proloma Church (2.0 km), some of Pskov's top attractions.

When you’re feeling hungry, be sure to check out Confectionery Misha, Milk and Cookies, and Coffee Brabus, which are some cafes that are popular with locals and out-of-towners alike.

Pskov is also known for some great architectural buildings, including Gremyachaya Tower, Cathedral of St. John the Baptist, and Kremlin Prikaznye Palaty, which are not too far from Rijskaya Hotel.

Rijskaya Hotel puts the best of Pskov at your fingertips, making your stay both relaxing and enjoyable.

• Excellent 29
• Very Good 104
• Terrible 12
• All languages ( 277 )
• Russian ( 260 )
• English ( 13 )
• French ( 1 )

" On some floors there are renovated rooms, but you should ask for them! "

Own or manage this property? Claim your listing for free to respond to reviews, update your profile and much more.

Rijskaya Hotel - Reviews & Photos

View prices for your travel dates

• Excellent 174
• Very Good 63
• All languages ( 271 )
• Russian ( 247 )
• English ( 18 )
• French ( 3 )

" 3rd floor is a mansarda, but with lots of daylight, so no need to avoid it. "

" The better room view is a view on the church. But remember the view on the church also means the view on the parking area in front of it. "

Own or manage this property? Claim your listing for free to respond to reviews, update your profile and much more.

OLD ESTATE HOTEL & SPA