star trek tng phaser replica

display – play – control

Star trek: the original series, phaser universal remote control prop replica, please note that the star trek phaser is no longer in production and no retailers have any remaining stock. we currently have no plans to resume production, although that may change at some point in the future., our star trek: the original series phaser universal remote control is an exceptionally accurate and highly detailed working replica that we launched at san diego comic-con in july 2014. it is also a gesture-based remote control compatible with most home entertainment equipment that use infrared remote controls..

Highly accurate: Created from 3D laser scans of the last known hero prop

Guided Setup: Teaches you how to use it with spoken prompts

FX Mode: Authentic special FX sounds from the Star Trek universe at the pull of a trigger

Built in rechargeable battery: USB charging cable included

Advanced gesture recognition: Nine gestures in four memory banks means that 36 remote control codes can be stored

Any-TV-Off mode: Easily turn off TVs without the need for programming

Hand-polished metal parts : nickel and brass-plated die-cast details

beautifully presented

The phaser prop replica is protected from damage and kept in pristine condition (when not on display) in a high quality, moulded-foam-lined presentation case. Manufactured in hardwearing engineering-grade ABS, the case is also designed to stack as if from the original Enterprise armoury.

quality materials

Hand polished, matt nickel plated die castings, painted and lacquered parts and an authentic mixture of rubber, plastic and metal components are all brought together to create an exceptionally well-finished Phaser replica that looks and feels like it means business.

the ultimate collectible

Whether you have just discovered Star Trek or have been hooked since you were a kid, this Phaser is something that you just have to own. Researched, designed and built with fanatical attention to detail, the simplicity of its embossed nickel-plated magnetic stand presents this iconic piece perfectly.

the fantasy made real

Designed from the first 3D laser scans of the last known hero Phaser, this amazing prop replica boasts a host of exciting features such as tactile feedback, multi colour light up nozzle, 10 authentic phaser firing sounds, a removable Phaser I and grip, while also being a fully-functional gesture based universal remote control.

The Wand Company’s unique gesture-based remote control technology brings the fantasy to life

This Original Series Phaser Universal Remote Control is not a toy: it is an advanced, gesture based universal remote control, designed to control almost all home entertainment equipment worldwide such as TVs, DVD players, Blu-ray players and iPod docks, using infrared codes learned from conventional remote controls by the means of gestures rather than by pressing buttons. A total of nine different gestures and four separate memory banks enable the Phaser to learn up to 36 remote control functions. At the press of the trigger button, the Phaser pulses and produces one of ten different Phaser firing sounds (depending on the setting of the Phaser II dial), and has the power to instantly stun almost any TV without any setup required.

The removable Phaser I is a fully functioning remote control in its own right and may be used when not docked to the Phaser II. It has a built-in rechargeable lithium power cell that is charged from any USB socket via the included cable.

Programming the Phaser by learning the codes from a standard remote control is easy

To program the Phaser, enter Programming Mode and perform the desired gesture; the Phaser will say which gesture has been done, then the emitter will glow yellow to signify that it is waiting to receive the IR code (button press) from a normal remote control. Hold a normal remote control about 1” (2.5cm) from the beam emitter of the Phaser I while it is glowing, and briefly press and release the normal remote control button for the function you want to program on to that gesture. It’s that easy!

What the Press and customers are saying about our Original Series Phaser

T3: boy this will take you to geek heaven.

If you’re a massive Star Trek fan, then get ready to hide your wallet away.

Remote control specialists, the Wand Company has unveiled its Star Trek: The Original Series Phaser Universal remote control for your TV. And boy, will this take you to geek heaven.

ABC News: One of this year’s coolest devices

Each year companies use Comic-Con International in San Diego to showcase new products that appeal to genre audiences.

One of this year’s coolest devices has to be a remote control that is in the shape of a ‘Star Trek’ original series phaser.

The pistol design is so unique because of the care and love The Wand Company took to create it.

The British firm previously made two ‘Doctor Who’ remote control devices in the shape of sonic screwdrivers. Those remotes got them some well-deserved attention.

Reviewify: A brilliant replica that can be easily displayed

Before looking at the Phaser itself a word on the presentation. Arriving in a cardboard box you might wonder what’s so large inside, after all the Phaser is a handgun. Brilliantly The Wand Company have taken that idea and run with it, creating a Starfleet issue case for the Phaser, the sort you see assassins and spy types making use of in films. Opening the case you’ll see a disassembled Phaser laid out into it’s key components, it’s a brilliant introduction that shows the level of details they’ve put into this…

… If there is one thing you can count on with The Wand Company it’s that they put a lot of effort into the details. It doesn’t stop at the excellent packaging, the Phaser itself looks fantastic and you can even take a look at the dilithium chamber ‘powering’ the Phaser by glowing and throbbing away whenever the trigger is pulled.

It would’ve been enough to pull the trigger and have the classic Phaser sound play, instead of leaving it at that you actually get a multitude of sound effects accessed via the stun setting. A nice touch is that the detachable Phaser 1 carries over the SFX you’ve selected on Phaser 2. It’s another ‘stunning’ (sorry, had to get one pun in!) remote from The Wand Company. A brilliant replica that can be easily displayed which also just happens to be an IR remote, the presentation case makes this a fantastic present idea for the special Trek fan in your life.

CNET: Turn it up Scotty

Turn it up Scotty: with the “Star Trek: The Original Series” Phaser Universal Remote Control you’re in the Captain’s seat every time you watch TV.

The Phaser remote is built by the Wand Company, the people behind the “Harry Potter” wand and “Doctor Who” Sonic Screwdriver remotes that change channels with a flick of the wrist…

Previously, CBS and Toshiba gave away a phaser-shaped remote with a “Star Trek” HD-DVD box set way back in 2007. That design made some compromises, with standard remote control buttons on the top, but this one is a much more accurate rendition.

Gizmodo: Wonderfully-detailed phaser prop

The only thing more satisfying for Star Trek fans than fast-forwarding through Enterprise’s awful opening credits would be doing it with this wonderfully-detailed phaser prop universal remote.

Daily Star: As close as it gets to wielding the real thing

This TV remote is a bit of a stunner.

The Phaser has just been launched by gadget website Firebox and if you are a Star Trek fan you’re going to love this. It’s been painstakingly 3D scanned from the last remaining Phaser prop in existence, used nearly 50 years ago by Star Trek hero William Shatner.

This ridiculously detailed replica is as close as it gets to wielding the real thing. And it won’t just change your TV channels but also your music devices and DVD players. It’s even packed with sound effects for the full Trekkie experience.

The only thing it won’t do is vapourise members of your family when they won’t be quiet during the football..

Geekstronomy: It is truly a thing of beauty

Now the next stage of phaser evolution has come and it is truly a thing of beauty. Produced by The Wand Company and distributed by Thinkgeek, the original series phaser remote kicked up the coolness factor to 11. This phaser was constructed using 3-D scans of the last surviving “hero” prop from the 1960’s. For those of you who do not know what a hero prop is; it is usually a functional and very highly detailed prop for use in close-ups. Holding this remote is the closest most of us will ever get to touch an original phaser.

When it comes to talking about the phaser remote I can honestly say I don’t know where to begin. While the Star Trek Original Series Phaser Universal Remote will change your channels, that is just the beginning. The Star Trek Original Series Phaser Universal Remote has a play setting where you can pretend to stun your friends, kill your enemies or you can set it to overload.

Mashable: A perfect replica phaser

Star Trek fans have always dreamed of having a trusty phaser at their sides, but thankfully, there’s not quite a need in everyday life to stun hostile alien lifeforms.

Now, Trekkies can now experience a perfect replica phaser — that powers on your TV.

Space.com: Retro Future Winner

Winner: This super-fun remote is actually modeled after one of the last known prop phasers from “Star Trek.” Just like the original phaser, the remote comes complete with a light-up dilithium crystal. You can program the phaser to any IR remote, and it actually senses your motions, meaning that you can program it in fun ways. For example, you can turn the volume on your TV up by moving the remote up above your head. What we love about it : This toy takes itself seriously. The phaser makes real “Star Trek” sounds and, simply put, it makes something as mundane as changing the channel on your TV fun. Plus, it’s the perfect gift for any “Star Trek” super-fan in your life.

All I can say is wow!

All I can say is wow! This phaser has all the bells and whistles from the look of it to the weight. It has more sound effects than the master replicas version through the Phaser II but the Phaser I can do all of them just one at a time. The wand company just makes a great product (I have both sonic screwdrivers). Oh and did I mention the remote function works great with a little practice.

The detail is second to none and the features are brilliant

When I’d finished ‘playing’ with my Phaser I had to email The Wand Company directly and congratulate them on making such a fantastic ‘toy’. It is remarkable. The detail is second to none and the features are brilliant. Although I’m too lazy to fully utilise its capabilities as yet I have had much fun zapping anything that moves, disabling any TV or remote controlled gadget that gets in my way. (It is, of course, a fully functioning remote control).

The amount of effects for the Phaser is good too. They range from a single pulse all the way through to self-destruct. I learned a few tips from YouTube on how to use it most effectively. There are a couple of ‘Easter Eggs’ you may want to know about.

One small thing I would like to point out is the cover to the dilithium crystal. It can work a little loose. This is easily fixable with a blob of BluTak placed inside the cover. This connects the cover to the crystal giving it stability and is unseen. (A very small problem that is easily fixed and you don’t lose the cover).

Lastly, if you are hesitating about buying one of these Phasers, don’t. It is now one of my most prized possessions and the envy of my fellow 50 year+ mates. It is sitting proudly on its magnetic stand on my bookcase.

It is the absolute best prop replica I have ever seen

This is far, far more than a novelty TV remote. It is the absolute best prop replica I have ever seen (and I’ve owned quite a few!). Clearly designed by passionate Star Trek fans, the detail is breathtaking. It is light years ahead of other great models from companies like Master Replicas or Franklin Mint. Every collector should have one of these, it is truly awesome.

I would recommend 100%

Great original phaser. Fantastic attention to detail, & the sound on the various settings are so like the original phaser, used by Captain Kirk, Spock etc. I was very causious at first, but am so pleased I bought it. If you are thinking of buying one of these magnificent phaser weapons do not think twice about it. Great product, & quite heavy. I would recommend 100%

Absolutely love this phaser

Absolutely love this phaser, I am a fan of the original series and having this phaser is as close as you are going to the actual prop at a reasonable price is great. Works out of the box just charge it up then follow the instructions and away you go.

Just to add my 7 year old lost the crystal cover from the side of the phaser, I contacted the Wand Company and asked if I could get a replacement. The next day FOC it was in the post, very good customer service 10/10

The quintessential one to own!

Of all the phaser props, toys, and models released over the years, this one, hands down, is the quintessential one to own! The look, the weight, the sounds effects are spot on! You can’t go wrong with this one! It is well worth the price, I myself have two of them! Do yourself a favor, if you are a Star Trek fan, or know one, it’s the perfect gift!

It is OUTSTANDING in every way!

To the team that designed and built this item – it is OUTSTANDING in every way! Your attention to detail is so dead on, it’s scary. I doubt that I will ever change a TV channel with it, but all the other fun functions only serve to enhance the superb quality of this prop. So glad that I bought one. Now you guys have a new challenge – a Tricorder and Communicator made with the same level of care. And, if you can work with one of the cell phone companies (even some of those back-water Chinese firms) to make a functioning mobile phone device, all the better. I am NOT easily impressed, but your work here really knocked my socks off. As stated before, OUTSTANDING!

It is right up there with the high end replicas

Just got mine, this thing is flawless. it is right up there with the high end replicas, yet has so many more features. This thing even talks you through the functions. The detail is awesome, every detail is perfect, right down to the rubber bushing to protect the nose section of the Phaser 1, when cradled. It blows my mind that they can offer it so cheap considering the level of detail and the great storage case that comes with the unit. Very pleased.

The Best I've seen on the market

This puppy is truly remarkable. Accurate, hefty, functional (ok, it doesn’t actually phase things out of existence…but the sound and lights are superb). The Best I’ve seen on the market.

The Phaser is packed with features that enrich the owning experience, making it perfect for any Sci-Fi fan

Setting the Phaser II dial selects one of ten authentic Phaser firing sounds that play when the Phaser’s trigger button is pressed. Rolling the thumbwheel lifts the aspirator grille and sight in a single smooth action. Pressing the multicolour illuminated mode indicator switches between Practice, Control and FX Mode to give you easy access to all the Phaser’s features.

Assemble the Phaser as if you are a member of the Enterprise crew: slot the grip neatly into the sockets on the underside of the Phaser II and tighten the securing bolt with the special screwdriver supplied. Dock the Phaser I and feel it snap positively into place. Unscrew the dilithium chamber door to inspect the glowing dilithium crystal.

Where you can buy a Phaser

Unfortunately, the Star Trek Phaser is no longer in production and no retailers have any remaining stock. At present, we have no plans to make any more phasers, however, that may change in the future.

Will the Phaser work with my equipment?

Can the phaser perform all functions of my remote control, is the phaser easy to use, what batteries does the phaser use.

• Is the Phaser a ``screen-accurate`` replica?

Can I charge the Phaser with any micro USB cable?

Will the phaser forget the programmed codes if i let the battery completely run down, where can i buy a phaser, frequently-asked questions.

Look down this list of frequently-asked questions to find answers that will help you if you are thinking of buying a Phaser and want to learn more about how it works or how accurate it is. Click on the question and the answer will be displayed here.

You might also like to download an easy-print PDF copy of the user manual , or go to a web version of the manual by clicking here .

Will the Phaser work with my equipment?

The Phaser is compatible with almost all makes of home audio-visual equipment around the world, such as TVs, DVD players, hi-fis and set-top boxes. Please note that the Phaser only works with infra-red (IR) remote controls, not radio-frequency (RF) remotes, and that the Phaser is not compatible with Bang & Olufsen equipment.

Can the Phaser perform all functions of my remote control?

No, the Phaser is not a full replacement for your standard remote control. However it can learn the infra-red (IR) codes from 36 of the buttons on your existing remote controls. This is enough for you to have some fun performing controlling your home entertainment equipment. You can over-write any of the 36 functions with new IR codes at any time, if you change your mind about the functions that you want the Phaser to perform.

Is the Phaser easy to use?

Like any sensitive instrument, it takes a bit of practice to master the Phaser. Some people seem to be natural members of the Enterprise crew and can stun TVs and iPod docks into silence with it straight away, but for most Starfleet trainee officers, about ten minutes’ practice is required to get the hang of the different movement gestures. Please note that the Phaser does require quite precise hand movements to perform the gestures, so we do not recommend it as a remote control for the elderly or infirm.

The Phaser I has a built-in rechargeable lithium power cell that is recharged via the USB cable supplied with the Phaser. (Any good quality micro USB cable may also be used). The Phaser II does not have a battery but takes its power from the Phaser I when they are docked together. The power cell in the Phaser I cannot be changed and will last the lifetime of the product.

Note that the battery should be looked after as lithium polymer batteries can become damaged and fail if not regularly charged. The Phaser should be fully charged at least once every six months to make sure that the battery remains in good condition.

Is the Phaser a “screen-accurate” replica?

For most users the answer is a definite “Yes!”. We have spent thousands of hours and taken great care to make this Phaser replica as accurate as possible to the actual last known screen-used hero prop that Shatner and Nimoy used in the original series of Star Trek. This has included taking the first 3D laser scans of the original hero prop, under the watchful eye of Academy Award-nominated prop maker and Star Trek authority, Greg Jein, who owns the original prop and kindly allowed us access to study it. We weighed the parts of the original prop, so as to be able to tune the weight of the replica to get it as close as possible to that of the original, and assessed the colour and lustre of the various parts of the original prop under a variety of lighting conditions to make sure that our Phaser replica was the closest possible match for both colour and surface finish. To complement the scans we took detailed micrometer measurements and numerous photographs, and discussed the provenance of the original hero prop at length with Greg Jein to make sure that our Phaser not only followed the data of the original accurately, but also captured the nuances of the original prop’s intention. However, in order to make the Phaser manufacturable and more affordable, and to iron out some of the original’s inconsistencies, we have had to make some slight changes, and as such, this replica may be considered to be an idealised version of the original hero prop.

The hero prop is made from a range of different materials including fibreglass, brass, aluminium, resin and acrylic. In order to keep the cost as reasonable as possible we have used the nearest equivalent material that is suitable for modern manufacturing methods. Generally, where metal has been used in the construction of the hero prop, we have used metal in the Phaser replica. In the hero prop, where aluminium is used for the muzzle, side door, heat sink, side rails, thumbwheel, and selector dial, we have used hand-polished, nickel-plated, die cast zinc. The grip of the original is made from hand painted brass tube embellished with popsicle sticks – our replica is also painted, but is made from die cast zinc. The original Phaser I and II bodies are made in fibreglass and have been painted (a number of times through the prop’s history), and we have replicated these parts as closely as possible in lacquer coated, injection moulded ABS. Finally, where the original hero prop uses cast resin or acrylic for the transparent elements, such as the nozzles and lens covers, we have used acrylic and a water-clear co-polyester called Tritan, to achieve the best optical clarity and mouldablity.

The original hero prop is not symmetrical. The parting line separating the two halves doesn’t run down the centreline of the Phaser II body, and even taking this into account, the two halves of the Phaser II body do not have symmetrical curves and features. The two halves of the body are held together with an off-centre screw on the underside of the Phaser in front of the trigger. When designing our Phaser replica, we decided to straighten out the Phaser II body, make the parting line run along the centreline and remove the fixing screw. The sweep of the sides in the plan view was a best-fit average of the left and right side 3D scan data. The original Phaser I only has a metal side rail on its right hand-side. On the left-hand side of the Phaser I, the side rail is replaced with a strip of black hook and eye (Velcro®) fastener, onto which a silver line is drawn. This was used to attach the Phaser to the actors’ costumes on set, and while this might have been acceptable for filming, in reality it doesn’t look very good, so we replaced the fastening strip with a metal side rail to match the right-hand side. In every other respect we have attempted to make the Phaser replica as close as possible to the exact dimensions of the original using the 3D scans in conjunction with detailed and accurate measurements we took of the original.

Functional differences

In order to improve infrared transmission reliability, the Phaser replica uses a rod of solid acrylic as a light guide, rather than a drilled-out tube that the original prop used for its Phaser I emitter tip. Our emitter tip is fixed so that it cannot extend and retract when the sight is raised and lowered. On the original prop, the indicator lens on top of the Phaser I is a simple piece of clear cast resin glued to the top housing over a numerical scale printed on paper. The Phaser prop replica is a complex piece of equipment and its indicator lens is put to good use as a functional mode selection button. As a result the lens is illuminated and instead of numbers, displays the letters, P, C and Fx, relating to the different modes (Practice, Control and FX modes). The original prop’s grip twists into place using curved pins that also form an electrical connection between the battery compartment (in the grip) and the Phaser II main body emitter lamp. Over time, this mechanical joint has been subjected to stress and wear and has become very weak. In the design of the Phaser replica we have addressed this issue. The replica grip pushes on to the Phaser II main body in a similar way to the original, but the grip is securely held in place using a long bolt that is positioned to resemble the nut that holds the battery door onto the base of the grip in the original. In the original prop there is no electrical connection between the Phaser I and II. However, in the replica, when the Phaser I and II are docked together there is a constant stream of information going between their respective microcontrollers. In addition, the battery power for the assembled Phaser comes from a lithium battery in the Phaser I. As a result there is an array of connector pins on the top surface of the Phaser II docking recess, which mate with matching gold pads on the underside of the Phaser I. The original Phaser hero prop has a large recess in its end face for the locking catch that holds it in place when it is docked, In the Phaser I replica, this recess is partially filled with a micro USB charging socket. Sound is an important part of the apparent function of any prop. Yet when making TV shows and films, the sound effects are almost always added afterwards in post-production, and it is unusual for props to make any sound. However, to make our replica as engaging as possible we decided that it should make an appropriate range of Phaser firing sounds. The Phaser I replica has a speaker mounted under the grille, which instead of being a thin sheet of pressed foil, is a nickel plated die casting which has been made with tiny holes in it to let the sound out. The shape and pattern of the replica grille’s surface features have been carefully matched to those of the original prop.

Over the years of filming, the original Phaser was naturally subjected to rough handling and needed to be repaired and repainted on occasion. Over successive repairs, the reeding on the top surface at the back of the Phaser II body became damaged. The Phaser replica has perfect reeding as it was originally created. On the Phaser replica, the circular knob/door feature on the front left-hand side of the Phaser II has been made removable so that it can be opened to reveal a glowing dilithium crystal inside the main body. In the original prop, this feature was not removable.

Yes. The Phaser is supplied with with a USB charging cable, but any good quality micro USB cable may be used to charge the Phaser.

No, the codes are not erased when the Phaser runs out of charge. The Phaser will retain the remote control codes it has learned even if it is not charged for a long period. However, to maintain the condition of the battery, it is recommended that the Phaser be charged at least once every six months.

The Phaser is no longer in production and unfortunately, all retailers that once stocked the phaser have sold through.

The Phaser is compatible with almost all makes of home audio-visual equipment around the world, such as TVs, DVD players, hi-fis and set-top boxes. Please note that the Phaser only works with infra-red (IR) remote controls, not radio-frequency (RF) remotes, and that the Phaser is not compatible with Bang & Olufsen equipment.

No, the Phaser is not a full replacement for your standard remote control. However it can learn the infra-red (IR) codes from 36 of the buttons on your existing remote controls. This is enough for you to have some fun performing controlling your home entertainment equipment. You can over-write any of the 36 functions with new IR codes at any time, if you change your mind about the functions that you want the Phaser to perform.

Like any sensitive instrument, it takes a bit of practice to master the Phaser. Some people seem to be natural members of the Enterprise crew and can stun TVs and iPod docks into silence with it straight away, but for most Starfleet trainee officers, about ten minutes’ practice is required to get the hang of the different movement gestures. Please note that the Phaser does require quite precise hand movements to perform the gestures, so we do not recommend it as a remote control for the elderly or infirm.

The Phaser I has a built-in rechargeable lithium power cell that is recharged via the USB cable supplied with the Phaser. (Any good quality USB to micro USB cable may also be used). The Phaser II does not have a battery, but takes its power from the Phaser I when they are docked together. The power cell in the Phaser I cannot be changed and will last the lifetime of the product.

Is the Phaser a “screen-accurate” replica?

For most users the answer is a definite “Yes!”. We have spent thousands of hours and taken great care to make this Phaser replica as accurate as possible to the actual last known screen-used hero prop that Shatner and Nimoy used in the original series of Star Trek . This has included taking the first 3D laser scans of the original hero prop, under the watchful eye of Academy Award-nominated prop maker  and Star Trek authority, Greg Jein, who owns the original prop and kindly allowed us access to study it. We weighed the parts of the original prop, so as to be able to tune the weight of the replica to get it as close as possible to that of the original, and assessed the colour and lustre of the various parts of the original prop under a variety of lighting conditions to make sure that our Phaser replica was the closest possible match for both colour and surface finish. To complement the scans we took detailed micrometer measurements and numerous photographs, and discussed the provenance of the original hero prop at length with Greg Jein to make sure that our Phaser not only followed the data of the original accurately, but also captured the nuances of the original prop’s intention.

However, in order to make the Phaser manufacturable and more affordable, and to iron out some of the original’s inconsistencies, we have had to make some slight changes, and as such, this replica may be considered to be an idealised version of the original hero prop.

The hero prop is made from a range of different materials including fibreglass, brass, aluminium, resin and acrylic. In order to keep the cost as reasonable as possible we have used the nearest equivalent material that is suitable for modern manufacturing methods. Generally, where metal has been used in the construction of the hero prop, we have used metal in the Phaser replica. In the hero prop, where aluminium is used for the muzzle, side door, heat sink, side rails, thumbwheel, and selector dial, we have used hand-polished, nickel-plated, die cast zinc. The grip of the original is made from hand painted brass tube embellished with popsicle sticks – our  replica is also painted, but is made from die cast zinc. The original Phaser I and II bodies are made in fibreglass and have been painted (a number of times through the prop’s history), and we have replicated these parts as closely as possible in lacquer coated, injection moulded ABS. Finally, where the original hero prop uses cast resin or acrylic for the transparent elements, such as the nozzles and lens covers, we have used acrylic and a water-clear co-polyester called Tritan, to achieve the best optical clarity and mouldablity.

The original hero prop is not symmetrical. The parting line separating the two halves doesn’t run down the centreline of the Phaser II body, and even taking this into account, the two halves of the Phaser II body do not have symmetrical curves and features. The two halves of the body are held together with an off-centre screw on the underside of the Phaser in front of the trigger. When designing our Phaser replica, we decided to straighten out the Phaser II body, make the parting line run along the centreline and remove the fixing screw. The sweep of the sides in the plan view was a best-fit average of the left and right side 3D scan data.

The original Phaser I only has a metal side rail on its right hand-side. On the left-hand side of the Phaser I, the side rail is replaced with a strip of black hook and eye (Velcro®) fastener, onto which a silver line is drawn. This was used to attach the Phaser to the actors’ costumes on set, and while this might have been acceptable for filming, in reality it doesn’t look very good, so we replaced the fastening strip with a metal side rail to match the right-hand side.

In every other respect we have attempted to make the Phaser replica as close as possible to the exact dimensions of the original using the 3D scans in conjunction with detailed and accurate measurements we took of the original.

In order to improve infrared transmission reliability, the Phaser replica uses a rod of solid acrylic as a light guide, rather than a drilled-out tube that the original prop used for its Phaser I emitter tip. Our emitter tip is fixed so that it cannot extend and retract when the sight is raised and lowered.

On the original prop, the indicator lens on top of the Phaser I is a simple piece of clear cast resin glued to the top housing over a numerical scale printed on paper. The Phaser prop replica is a complex piece of equipment and its indicator  lens is put to good use as a functional mode selection button. As a result the lens is illuminated and instead of numbers,  displays the letters, P, C and Fx, relating to the different modes (Practice, Control and FX modes).

The original prop’s grip twists into place using curved pins that also form an electrical connection between the battery compartment (in the grip) and the Phaser II main body emitter lamp. Over time, this mechanical joint has been subjected to stress and wear and has become very weak. In the design of the Phaser replica we have addressed this issue. The replica grip pushes on to the Phaser II main body in a similar way to the original, but the grip is securely held in place using a long bolt that is positioned to resemble the nut that holds the battery door onto the base of the grip in the original.

In the original prop there is no electrical connection between the Phaser I and II. However, in the replica, when the Phaser I and II are docked together there is a constant stream of information going between their respective microcontrollers. In addition, the battery power for the assembled Phaser comes from a lithium battery in the Phaser I. As a result there is an array of connector pins on the top surface of the Phaser II docking recess, which mate with matching gold pads on the underside of the Phaser I.

The original Phaser hero prop has a large recess in its end face for the locking catch that holds it in place when it is docked, In the Phaser I replica, this recess is partially filled with a micro USB charging socket.

Sound is an important part of the apparent function of any prop. Yet when making TV shows and films, the sound effects are almost always added afterwards in post-production, and it is unusual for props to make any sound. However, to make our replica as engaging as possible we decided that it should make an appropriate range of Phaser firing sounds. The Phaser I replica has a speaker mounted under the grille, which instead of being a thin sheet of pressed foil, is a nickel plated die casting which has been made with tiny holes in it to let the sound out. The shape and pattern of the replica grille’s surface features have been carefully matched to those of the original prop.

Over the years of filming, the original Phaser was naturally subjected to rough handling and needed to be repaired and repainted on occasion. Over successive repairs, the reeding on the top surface at the back of the Phaser II body became damaged. The Phaser replica has perfect reeding as it was originally created.

On the Phaser replica, the circular knob/door feature on the front left-hand side of the Phaser II has been made removable so that it can be opened to reveal a glowing dilithium crystal inside the main body. In the original prop, this feature was not removable.

Can I charge the Phaser with any micro-USB cable?

Yes. The Phaser is supplied with with a USB charging cable, but any good quality micro USB cable may be used to charge the Phaser.

No, the codes are not erased when the Phaser runs out of charge. The Phaser will retain the remote control codes it has learned even if it is not charged for a long period. However, to maintain the condition of the battery, it is recommended that the Phaser be charged at least once every six months.

Sign in to your account

• $12 Shipping On Orders Of $100 Or More - Click Here For Details

Just Arrived

• An American Werewolf In London
• Back To The Future
• The Beatles
• Beetlejuice
• Child's Play
• Deathstroke
• The Exorcist
• Game Of Thrones
• The Goonies
• The Green Hornet
• Harry Potter
• House Of The Dragon
• Jurassic Park
• Jurassic World
• Knight Rider
• The Lone Ranger
• Lord Of The Rings
• Masters Of The Universe
• Men In Black
• The Munsters
• The Princess Bride
• Rick And Morty
• ThunderCats
• Universal Monsters
• Wizard Of Oz
• Wonder Woman

Product Type

• Accessories
• CHS Keychain And Pin Sets
• Fandages Collectible Bandages
• Kitchen And Barware
• License Plate Frames
• Lithographs And Prints
• Metal Miniatures
• Metal Signs

Prop Replicas

• Scaled Prop Replicas
• Statues & Desktop Sculptures
• STIX Walking Sticks And Cane Toppers
• SWAT Soft Weapons And Tactics

Star Trek | The Next Generation Type-3 Phaser Rifle Scaled Prop Replica

Expand your collection, scaled prop replicas.

No featured offers available

• Quality Price,
• Reliable delivery option, and
• Seller who offers good customer service

Image Unavailable

• To view this video download Flash Player

Star Trek the Next Generation Phaser

• 100% Plastic
• Officially licensed Star Trek The Next Generation costume accessory; look for trademark on label and packaging to help assure you've received an authentic safety-tested item
• Plastic Phaser modeled on The Next Generation; with sound
• Costume accessory not intended for rough play or battle action
• Requires 2 AAA Batteries for sound (batteries available separately); do not use rechargeable batteries
• Family-focused, and based in the U.S.A. since 1951; Rubie’s has classic and licensed costumes and accessories in sizes and styles for your entire family

Top rated similar items

Product information

Product description.

Rubie's Costume Company has designed quality costume and fun clothing for decades. Trusted to be the leader of cosplay, Halloween, and general decor items, Rubie's does not sacrifice quality for price. Expect the highest in costume design and material with Rubie's.

From the Manufacturer

Whether the exciting new Star Trek movie has made you a fan or you've been watching Classic Star Trek, Next Generation, Voyager, DS9, or Enterprise for years - you'll want to beam up to your next costume party in this officially licensed Star Trek costume. Rubies Costume Company has been offering the world's finest collection of Halloween products for 58 years.

From the brand

Shop Rubies

Visit the Store

What's in the box

• costume accessory

Videos for this product

Click to play video

Comparison between Rubie's Star Trek Phaser and Playmates' Star Trek TNG Collector's Edition Phaser

Jamie Taylor

Looking for specific info?

Customer reviews.

Customer Reviews, including Product Star Ratings help customers to learn more about the product and decide whether it is the right product for them.

To calculate the overall star rating and percentage breakdown by star, we don’t use a simple average. Instead, our system considers things like how recent a review is and if the reviewer bought the item on Amazon. It also analyzed reviews to verify trustworthiness.

Customers say

Customers like the appearance, performance, and value of the costume outfit. For example, they mention it looks great, works well for general costuming purposes, and is a decent piece for a budget costume. That said, some complain about the battery, and weight. Opinions are mixed on quality and noise.

AI-generated from the text of customer reviews

Customers like the appearance of the costume outfit. For example, they say it has a good-looking black and silver paint scheme, and it looks great hanging on their belt. Some say it's convincing and makes a decent prop. Overall, most are satisfied with the appearance and recommend it as a cute accessory.

"...-Durable plastic-Easy to get to the batteries- Very good paint job ! It looks exactly how it should.Cons:..." Read more

"The phaser is size and look are very good , I just wish it was a little heavier it’s light weight plastic and if you were to drop it feels like it..." Read more

"...it has a good-looking black and silver paint scheme (rather than that silly blue-and-white-toy color scheme that Ruby phaser props have)...." Read more

"...The paint job looks accurate , at least from memory and they seem to be the proper scale...." Read more

Customers like the performance of the costume outfit. For example, they say it works well for general costuming purposes, a renaissance festival version of a trek science officer, and play purposes. They also say it's a nice gun and a good prop for cosplay. Some mention it'll work well with the marching band's choreography. Overall, customers are happy with the performance and recommend it.

"...They are a wonderful complement for any Cosplayer's outfit, Halloween costume, or simply a nice little collectible for Trek fans!..." Read more

"...It works well for general costuming purposes , but it’s not 100% screen-accurate for collectors seeking something more accurate." Read more

"...perfectly on that first press, but after that first, it won't work correctly anymore . The sound is barely audible...." Read more

"Looks great and works great . I definitely recommend if you're a fan. Very cool" Read more

Customers find the value of the costume outfit to be good. They say it's accurate, solid, and a decent piece for a budget costume. Some customers also mention that it'll make a wonderful prop or collectible for Trek fans.

"Right-o, lets get started.-Pros:- Very affordable -Clean, crisp, and dare I say, perfect sounds effects!-Durable plastic..." Read more

"...You can’t choose what you want to hear. It’s generally well-made for the price . Don’t expect crisp and clean edges on the plastic...." Read more

"...Overall a good buy for the money ." Read more

"...If you are looking for something cheap and fun as a costume piece this phaser should do the trick." Read more

Customers find the costume outfit fun as a costume piece, and it's a nice toy for a kid who loves Star Trek. They also say it'll be good for rough play and carnival.

"...But overall, it's fun to own a phaser , and would especially be great for a child." Read more

"...This one is a bit cheaper but it is still a very fun product . I am a Mr. Frugal when it comes to my stuff...." Read more

"...It is, after all, a toy.The sound is great. Lots of fun to fool around in the office.Quick side note if anyone is interested;..." Read more

"It’s a little ruff and unpolished but for the produce it’s a fun prop for a costume " Read more

Customers have mixed opinions about the quality of the costume outfit. Some say it's well made and a decent prop for a ST:TNG costume, while others say it was cheaply made and has a tinny sound.

"...Don’t expect crisp and clean edges on the plastic. It is definitely a cheap toy ." Read more

"...-Clean, crisp, and dare I say, perfect sounds effects!- Durable plastic -Easy to get to the batteries-Very good paint job!..." Read more

"...quality control on the paint job is spotty (mine was okay), it's not a great sculpt , the details of the markings are inaccurate, and it is slightly..." Read more

"...Each phaser is lightweight though well made so they are easy to carry around and "play"with. They do make sounds...." Read more

Customers are mixed about the noise. Some mention that it makes perfect sounds effects, while others say that it's rather quiet.

" Multiple sound effects and fun toy ." Read more

"...To be clear, it does NOT light up, but it does make noise ...." Read more

"...-Very affordable-Clean, crisp, and dare I say, perfect sounds effects !-Durable plastic-Easy to get to the batteries..." Read more

"...They are made of cheap plastic and have a tinny sound but for $11 each, they are pretty hard to beat, especially for kids...." Read more

Customers are dissatisfied with the battery of the costume outfit. They mention that the screw to the battery compartment was stripped, the battery is not included, and the screw on the battery section is poor and tight.

"...The one negative about this item is the tiny screw that must be removed in order to place and change batteries...." Read more

"...The screw holding the battery compartment was stripped , it was a challenge to get off and wouldn't close all the way once I put batteries in...." Read more

"We ordered 2 of these for Christmas. Both of them somehow short the batteries and the batteries die really fast...." Read more

"...three sound effects out of one of the three buttons and it takes AAA batteries that are, as usual, not included...." Read more

Customers find the weight of the costume outfit to be flimsy and light. They also say it's front heavy and embarrassing to carry around.

"...It however, does not. It's all about the timing.-It's a bit bulkier than the "real" prop...." Read more

"The phaser is size and look are very good, I just wish it was a little heavier it’s light weight plastic and if you were to drop it feels like it..." Read more

"...They arrived promptly and in wonderful condition. Each phaser is lightweight though well made so they are easy to carry around and "play"with..." Read more

"...The feel is terrible - it's extremely light , with no heft in the hand, and the plastic has an unpleasant texture...." Read more

Reviews with images

• Sort reviews by Top reviews Most recent Top reviews

Top reviews from the United States

There was a problem filtering reviews right now. please try again later..

Top reviews from other countries

• Amazon Newsletter
• About Amazon
• Accessibility
• Sustainability
• Press Center
• Investor Relations
• Amazon Devices
• Amazon Science
• Sell on Amazon
• Sell apps on Amazon
• Supply to Amazon
• Protect & Build Your Brand
• Become an Affiliate
• Become a Delivery Driver
• Start a Package Delivery Business
• Advertise Your Products
• Self-Publish with Us
• Become an Amazon Hub Partner
• › See More Ways to Make Money
• Amazon Visa
• Amazon Store Card
• Amazon Secured Card
• Amazon Business Card
• Shop with Points
• Credit Card Marketplace
• Reload Your Balance
• Amazon Currency Converter
• Your Account
• Your Orders
• Shipping Rates & Policies
• Amazon Prime
• Returns & Replacements
• Manage Your Content and Devices
• Recalls and Product Safety Alerts
• Conditions of Use
• Privacy Notice
• Consumer Health Data Privacy Disclosure
• Your Ads Privacy Choices

• The Original Series
• The Animated Series
• The Next Generation
• Deep Space Nine
• Strange New Worlds
• Lower Decks
• Star Trek Movies
• TrekCore on Twitter
• TrekCore on Facebook

The second is a setting called “Crusher Mode,” named after Wesley Crusher’s use of the cricket phaser in TNG Season 5’s “The Game” — press the trigger and the right beam intensity button at the same time, and the phaser goes into rapid-fire mode for about five seconds, flashing the red beam light in time with the discharge sound to emulate Wesley’s tactic.

Thankfully, unlike some replicas these additional settings aren’t a hidden feature — the included instruction pamphlet clearly spells out how to activate each mode, so there’s no need to press random button combinations just to figure out how to make it work. (The electronics themselves are powered by four LR44 batteries, located below the removable trigger panel.)

Finally, like the TNG medical set last year, the cricket phaser replicas come packaged in a wood-and-glass display case, which also includes a metal plaque indicating the product’s edition number. It’s kind of overkill for a product this size, honestly, since the phaser itself measures in at less than 3.5 inches in length — but if this is the only replica in your collection, it does make for a nice display piece when it’s in the case.

While it looks nice, unless you’re a completist — or if you prefer the early look to the later color scheme — there’s not really a reason to buy the Season 1 limited edition over the standard dark-barrel version of the cricket phaser.  All of the electronics and sound effects are the same, and the $50 price bump isn’t really justified for the simple addition of silver paint around the front of the device.

It’s also not quite as accurate to the early-look model as it could be: the original had silver ‘lips’ at the front of the device ( seen here in “Justice” ) not replicated on Factory’s build, and the silver paint has a bit of castoff where the pattern was stenciled for application.

That said, both versions of the cricket phaser replica are nice pieces to hold, as their weighty all-metal bodies and clicky, responsive electronic buttons make each a remarkable upgrade from the old 1990s-era Playmates Toys playtime edition, which was inflated to a size nearly three times larger than the actual prop.

The price on each is nothing to scoff at, either — the standard edition is $299, with the Season 1 variant running for $349 — but in this case, for the build quality and functionality of each one, these replicas are very much in line with the cost you’d face if you commissioned a fan-built replica to the same specs. (We know it’s not affordable to everyone, of course, please don’t misunderstand us!)

These are just the first phaser replicas in Factory Entertainment’s planned  Star Trek arsenal; the company has already teased plans for a TNG Season 1 “dustbuster” phaser which we expect to see go up for preorder fairly soon, and there’s certainly more  Trek to come from this company in 2023 and beyond.

If you’d like to add either edition of Factory’s cricket phaser replicas to your collection, you can find them right here at the Factory Entertainment website.

Keep checking back to TrekCore for all the latest news on Factory Entertainment’s plans, and more from the world of  Star Trek merchandise and collectables!

• collectibles
• Factory Entertainment
• Star Trek: The Motion Picture
• Star Trek: The Next Generation
• Trek Merchandise

Related Stories

Star trek: discovery series finale review — “life, itself”, star trek: discovery review — “labyrinths”, star trek: discovery review — “erigah”, search news archives, new & upcoming releases, featured stories, lost-for-decades original star trek uss enterprise model returned to roddenberry family, star trek: lower decks cancelled; strange new worlds renewed for season 4, our star trek: discovery season 5 spoiler-free review.

TrekCore.com is not endorsed, sponsored or affiliated with Paramount, CBS Studios, or the Star Trek franchise. All Star Trek images, trademarks and logos are owned by CBS Studios Inc. and/or Paramount. All original TrekCore.com content and the WeeklyTrek podcast (c) 2024 Trapezoid Media, LLC. · Terms & Conditions

• New Products
• Featured Products
• Manufacturers
• My Wishlist
• A-Z Alien Series Product
• Alien 2: Aliens
• Alien Covenant
• Alien Ressurection
• Alien Vs. Predator
• Animation: A
• Animation: B
• Animation: C
• Animation: D
• Animation: E-F
• Animation: G-H
• Animation: I-L
• Animation: M-O
• Animation: P-R
• Animation: S
• Animation: T
• Animation: U-Z
• Charlie Brown
• BATMAN 1966
• BATMAN 1989
• BATMAN AND ROBIN
• BATMAN ANIMATED SERIES
• BATMAN ARKHAM
• BATMAN BEGINS
• BATMAN COMICS
• BATMAN FOREVER
• BATMAN OTHER
• BATMAN RETURNS
• BATMAN VS. SUPERMAN
• DARK KNIGHT
• DARK KNIGHT RISES
• Suicide Squad
• Wonder Woman
• Hanna Barbara
• Heavy Metal The Movie & Mag
• Looney Toons
• Captain America
• Guardians of the Galaxy
• Marvel Other
• Masters of the Universe
• Saturday Morning Cartoons
• Transformers
• Ghost in the Shell
• Gigantor/Tetsujin 28
• Kimba the White Lion
• Speed Racer
• Item List: A-Z
• Kamen Rider/ Masked Rider
• Ultra Seven
• B-Movies A-H
• B-Movies I-Z
• Candid Monsters Books & Mags
• Item List: 0-99 & A-Z
• Item List: A-H
• Item List: I-Z
• 1950's Monsters
• Blu-Ray Item List: A
• Blu-Ray Item List: B
• Blu-Ray Item List: C
• Blu-Ray Item List: D
• Blu-Ray Item List: E
• Blu-Ray Item List: F
• Blu-Ray Item List: G
• Blu-Ray Item List: H
• Blu-Ray Item List: I-J
• Blu-Ray Item List: K
• Blu-Ray Item List: L
• Blu-Ray Item List: M
• Blu-Ray Item List: N
• Blu-Ray Item List: O-P
• Blu-Ray Item List: Q-R
• Blu-Ray Item List: S
• Blu-Ray Item List: T
• Blu-Ray Item List: U-V
• Blu-Ray Item List: W
• Blu-Ray Item List: X-Y-Z
• DVD Item List: 0-99
• DVD Item List: A
• DVD Item List: B
• DVD Item List: C
• DVD Item List: D
• DVD Item List: E-F
• DVD Item List: G
• DVD Item List: H
• DVD Item List: I-K
• DVD Item List: L-M
• DVD Item List: N-O
• DVD Item List: P-R
• DVD Item List: S
• DVD Item List: T
• DVD Item List: U-V
• DVD Item List: W-Z
• Sword And Sandal
• Item List: 0-99 & A-E
• Item List: F-J
• Item List: K-O
• Item List: P-T
• Item List: U-Z
• Figure Bodies and Accessories
• Gift Certificates
• A-Z GODZILLA AND KAIJU
• GODZILLA 1954-1975 SHOWA ERA
• GODZILLA 1984-1995 HEISEI ERA
• GODZILLA 1999-2004 MILLENNIUM
• GODZILLA AMERICAN FILMS
• GODZILLA JAPAN CURRENT ERA
• OTHER KAIJU
• Books, Videos & DVDs
• Balsa & Foam
• Glues & Adhesives
• Masking Tape
• Photoetch & Decals
• Putty, etc.
• Sculpting, Molding
• Tools - Hand
• Tools - Power
• Customizing & Accurizing
• Display Cases and Stands
• MODEL LIGHTING
• Airbrush Compressors
• Airbrushes, etc.
• Paint Accessories
• Paint Brushes & Markers
• Paints - Airbrush
• Paints - Spray
• Classic Horror Item List A
• Classic Horror Item List B
• Classic Horror Item List C
• Classic Horror Item List D-E
• Classic Horror Item List F
• Classic Horror Item List G-H
• Classic Horror Item List I-J
• Classic Horror Item List K-L
• Classic Horror Item List M
• Classic Horror Item List N
• Classic Horror Item List O-P
• Classic Horror Item List Q-R
• Classic Horror Item List S
• Classic Horror Item List T
• Classic Horror Item List U-V
• Classic Horror Item List W-X
• Classic Horror Item List Y-Z
• Creature From The Black Lagoon
• Dracula and Vampires
• Frankenstein and His Monster
• Invisible Man
• Phantom of the Opera
• The Munsters
• Wolf Man and Werewolves
• Child's Play / Chucky
• Elvira Mistress of the Dark
• Friday the 13th
• Horror Contemporary A-E
• Horror Contemporary F-J
• Horror Contemporary K-O
• Horror Contemporary P-T
• Horror Contemporary U-Z
• It Stephen King
• John Carpenter's Halloween
• Nightmare on Elm Street
• Puppet Master
• Resident Evil
• Texas Chainsaw Massacre
• Walking Dead
• Item List: A-E
• MEN IN BLACK
• Macross Robotech Item List: A-Z
• Action Figures & Figurines
• Airplanes & Helicopters
• Ships & Submarines
• Apollo & Space
• Aurora & Vintage Model Kits
• B-Movie Model Kits
• Cartoon, Comic, Anime Model Kits
• Dinosaur Model Kits
• Diorama Model Kits
• Fantasy Model Kits
• Figure Model Kits
• Godzilla Model Kits
• Horror Model Kits
• Military Model Kits
• Model Box Reproductions
• Model Lighting
• Movie & TV Model Kits
• Other Model Kits A-Z
• Pin-Up Girl Model Kits
• Robot Model Kits
• 2001 A Space Odyssey
• Battlestar Galactica
• Forbidden Planet
• Lost In Space
• Maschinen Krieger
• Metropolis Model Kits
• Thunderbirds
• Time Machine
• Voyage To The Bottom Of The Sea
• Spaceships Spacecraft Model Kits
• Cars & Trucks
• Hot Rods & Street Machines
• Weapon Model Kits
• Movie Props
• One of a Kind Item List: A-E
• One of a Kind Item List: F-J
• One of a Kind Item List: K-O
• One of a Kind Item List: P-T
• One of a Kind Item List: U-Z
• Item List: A
• Item List: B
• Item List: C
• Item List: D
• Item List: E-F
• Item List: G-H
• Item List: I-J
• Item List: K-L
• Item List: M-O
• Item List: P-R
• Item List: S
• Item List: T
• Metal Signs
• Alien Vs Predator
• Predator A-Z
• The Predator (2018)
• 20 Million Miles To Earth
• 3 Worlds Of Gulliver
• 7th Voyage Of Sinbad
• Beast From 20,000 Fathoms
• Clash Of The Titans
• Earth Vs. The Flying Saucers
• First Men In The Moon
• Golden Voyage Of Sinbad
• It Came Beneath The Sea
• Jason and The Argonauts
• Mighty Joe Young
• Mysterious Island
• One Million B.C.
• Sinbad And The Eye Of The Tiger
• Valley Of The Gwangi
• Rock & Roll Collectibles
• 20,000 Leagues Under the Sea
• 2001: A Space Odyssey
• Alphabetical A-E
• Alphabetical F-J
• Alphabetical K-O
• Alphabetical P-T
• Alphabetical U-Z
• BATTLESTAR GALACTICA NEW
• BATTLESTAR GALACTICA 1978
• Blade Runner
• Day The Earth Stood Still
• DOCTOR WHO CLASSIC
• DOCTOR WHO NEW SERIES
• Firefly/Serenity
• Lost in Space
• Mars Attacks!
• Men in Black
• Pacific Rim
• Planet of the Apes
• Space: 1999
• Twilight Zone
• LP & CD Collecting Supplies
• LP Soundtrack Collection
• Soundtrack CD Item List: A
• Soundtrack CD Item List: B
• Soundtrack CD Item List: C
• Soundtrack CD Item List: D
• Soundtrack CD Item List: E-F
• Soundtrack CD Item List: G
• Soundtrack CD Item List: H
• Soundtrack CD Item List: I-J
• Soundtrack CD Item List: K-L
• Soundtrack CD Item List: M-N
• Soundtrack CD Item List: O-P
• Soundtrack CD Item List: Q-R
• Soundtrack CD Item List: S
• Soundtrack CD Item List: T
• Soundtrack CD Item List: U-Z
• 20,000 Leagues Under The Sea
• 2001 A SPACE ODYSSEY
• Aliens & Predators
• BACK TO THE FUTURE
• Funny Cars & Hot Rods
• KNIGHT RIDER
• RAT FINK, ED ROTH, WEIRD-OHS
• SPACE 1999 & UFO
• THUNDERBIRDS
• U.F.O.'S & FLYING SAUCERS
• Sports, Wrestlers and Jocks!
• Star Trek A-Z
• Star Trek Reboot Films
• Star Trek: Discovery
• Star Trek: Enterprise
• Star Trek: Original Series
• Star Trek: The Next Generation
• A-Z STAR WARS PRODUCT
• STAR WARS CLASSIC TRILOGY
• STAR WARS PREQUEL TRILOGY
• STAR WARS ROGUE ONE
• STAR WARS SEQUEL TRILOGY
• STAR WARS SOLO
• Star Wars The Mandalorian
• T-Shirts, Clothing & Jewelry
• Addams Family
• Back To The Future
• Game Of Thrones
• Ghostbusters
• Indiana Jones
• Item List A-Z
• LORD OF THE RINGS / HOBBIT
• A-Z Video Game Collectibles
• DEVIL MAY CRY
• DIVISION, THE
• FINAL FANTASY
• HEROES OF THE STORM
• KILLER INSTINCT
• MASS EFFECT
• MONSTER HUNTER
• MORTAL KOMBAT
• RESIDENT EVIL
• SEWER SOLDIERS
• STAR WARS BATTLEFRONT
• STREET FIGHTER
• TOMB RAIDER
• WORLD OF TANKS
• WORLD OF WARCRAFT
• Military Weapon Replicas
• Movie Weapon Replicas
• Specials ...
• New Products ...

Recently Viewed Products

Star Trek TNG Type-2 "Dust Buster" Phaser Prop Replica LIMITED EDITION

• Catalog #: 26TFA209
• Manufacturer: Factory Entertainment

Star Trek TNG Type-2 "Dust Buster" Phaser Prop Replica LIMITED EDITION:

The latest entry in its prolific line of high-end officially licensed limited edition prop replicas, the Star Trek: The Next Generation Type-2 'Dust Buster' Phaser!!

As seen in the iconic TV series Star Trek: The Next Generation, Type-2 Phasers were issued to Starfleet personnel during the early 2360’s and are larger and more powerful than Type-1 Phasers. Unofficially referred to by production as ‘The Dust Buster,’ they were intentionally designed to be sleek, free-flowing and less pistol-like than previous prop Starfleet weapon iterations.

Many different Dust Buster Phaser props were made and they ranged from fairly primitive non-functioning ‘stunt’ props, to more elaborate ‘hero’ props featuring functioning electronics. Featuring an impressively heavy all metal body, this replica has been designed to capture the best elements from all variants in a single blended execution and incorporate a variety of electronic light and sound features designed to simulate the special effects as seen on screen.

Each numbered, limited edition, museum-quality replica comes with a wooden presentation case, metal plaque and certificate of authenticity.

Dimensions: Type 2 Dust Buster Phaser -- 8¼ x 3 x 1 3/4” (209 x 76 x 44mm) Display Box — 11 x 6¼ x 3½” (279 x 158 x 76mm) Requires 2 x AAA batteries, which are included.

Product Features

• Made of metal and plastic
• From Star Trek: The Next Generation
• Detailed replica
• Features working LED lights
• Limited edition of 1,500 pieces  

WARNING: Monsters In Motion sells products, including children's products, for purchase by adults 18 years and over. Products may contain sharp points, small parts, choking hazards, and other elements not suitable for children under 16 years old. If any product you are purchasing is intended for a child please assume the following warning may apply to that product. WARNING: CHOKING HAZARD -- Small parts. Not for children under 3 yrs.

Related Products

Google Translate

Important links.

• Children Products Warnings
• U.S. Shipping, Returns, Policies
• International Orders, Policies, Shipping, Returns
• Firearm / Weapon Replicas Waiver
• Build Up Services
• DVD-R/CD-R Disclaimer

World Wide Shipping

•  ::  Report a Bug
•  ::  Firearm / Weapon Replicas Waiver